mirror of
https://github.com/rvtr/dsi.cfw.guide.git
synced 2025-06-19 02:55:33 -04:00
104 lines
5.6 KiB
Markdown
104 lines
5.6 KiB
Markdown
---
|
|
title: Installing Unlaunch
|
|
---
|
|
|
|
::: warning
|
|
|
|
If you do not have access to a PC, or if your PC is running ChromeOS, then please do not install Unlaunch. A PC (running Windows, Linux, or macOS) is required in order to fix some issues that may occur after installing Unlaunch.
|
|
|
|
:::
|
|
|
|
::: danger
|
|
|
|
If you have not yet done so, please follow [Dumping NAND](dumping-nand.html). While the chances are slim, Unlaunch can accidentally brick your Nintendo DSi. A NAND backup + [hardmod](https://wiki.ds-homebrew.com/ds-index/hardmod) would allow you to restore this backup, provided you know how to solder.
|
|
|
|
:::
|
|
|
|
::: warning
|
|
|
|
Make sure your console is charged when following this process. A sudden power loss could result in serious damage.
|
|
|
|
:::
|
|
|
|
::: warning
|
|
|
|
Unlaunch is not compatible with Nintendo DSi development consoles.
|
|
|
|
:::
|
|
|
|
## Section I - SD card setup
|
|
|
|
1. Download the latest version of [Unlaunch](https://problemkaputt.de/unlaunch.zip)
|
|
- [Mirror link](https://web.archive.org/web/20201112031436/https://problemkaputt.de/unlaunch.zip), if the above doesn't work
|
|
1. Extract `UNLAUNCH.DSI` from the `unlaunch.zip` archive and place it anywhere on your SD card
|
|
1. Verify you still have TWiLight Menu++ on your SD card
|
|
- If you are unsure, follow the instructions from the [TWiLight Menu++ install guide](https://wiki.ds-homebrew.com/twilightmenu/installing-dsi)
|
|
|
|
## Section II - Installing/Updating Unlaunch
|
|
|
|
1. Open TWiLight Menu++
|
|
- If this is your first time installing Unlaunch, relaunch TWiLight Menu++ through the [exploit that you used](launching-the-exploit.html)
|
|
- If you have already installed Unlaunch and are looking to update it, hold <kbd class="face">A</kbd> + <kbd class="face">B</kbd> while booting and select the option labeled `TWiLight Menu++`
|
|
- If several options are labeled `TWiLight Menu++`, select the option in where `BOOT.NDS` is shown at the end of the path on the bottom screen
|
|
- This happens because you are running an older version of TWiLight Menu++, unless you're doing it on purpose, is suggested that you [update your installation](https://wiki.ds-homebrew.com/twilightmenu/updating-dsi)
|
|
1. Launch TWiLight Menu++ Settings
|
|
- If you haven't changed your theme, press `SELECT` and touch the small DS icon on the bottom of the touch screen. Otherwise, see the TWiLight Menu++ Manual
|
|
1. Hit <kbd class="l">L</kbd> / <kbd class="r">R</kbd> or <kbd class="face">X</kbd> / <kbd class="face">Y</kbd> until you reach the `Unlaunch settings` page
|
|
1. If you want to change Unlaunch's background image, select `Background` and choose the one you want
|
|
- If you want to create your own Unlaunch background, see the [DS-Homebrew Wiki page](https://wiki.ds-homebrew.com/twilightmenu/custom-unlaunch-backgrounds)
|
|
1. Exit TWiLight Menu++ Settings
|
|
1. In the file navigation menu, launch `Unlaunch DSi Installer`
|
|
- If you see two black screens after launching, download [GodMode9i](https://github.com/DS-Homebrew/GodMode9i/releases), put its .dsi file on the SD root, then launch GodMode9i using TWiLight Menu++, and start `Unlaunch.dsi`
|
|
This method does not enable Unlaunch to use custom patches and background
|
|
1. Select the "install now" option
|
|
- If Unlaunch freezes at `ERROR: MISMATCH IN FAT COPIES`, please take a look at the [Troubleshooting](troubleshooting.html) page
|
|
1. When completed, reboot your system
|
|
|
|
If you see Unlaunch's Filemenu screen at this point, you have successfully modded your Nintendo DSi.
|
|
- If you see a black screen, please take a look at the [Troubleshooting](troubleshooting.html) page
|
|
|
|
## Section III - Post-Unlaunch configuration
|
|
|
|
Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed launch whatever you want.
|
|
|
|
1. Power on your console while holding <kbd class="face">A</kbd> and <kbd class="face">B</kbd>
|
|
- This should launch the Unlaunch Filemenu
|
|
- If nothing is listed, or if only `TWiLight Menu++` isn't listed (even after scrolling down), then you'll need to [reformat the SD card](sd-card-setup.html)
|
|
1. Navigate to `OPTIONS`, and look at the available options
|
|
- <kbd class="face">A</kbd> + <kbd class="face">B</kbd> is hardcoded to launch into Unlaunch's menu, and as such cannot be changed
|
|
- The `NO BUTTON` and `BUTTON A / B / X / Y` options can be set however you like and will choose what your DSi loads at boot depending on which buttons are held. You can select any DSiWare, homebrew, the Slot-1 card, wifiboot, or Unlaunch's Filemenu
|
|
- For TWiLight Menu++, select `TWiLight Menu++`
|
|
- For the original DSi Menu, select `Launcher`
|
|
- `LOAD ERROR` is what your DSi will load if loading what you have set fails, such as the SD card not being inserted
|
|
1. Select `SAVE & EXIT` to save your settings, then turn off your DSi
|
|
|
|
## Section IV - Cleaning up your SD card
|
|
|
|
::: tip
|
|
|
|
This section is optional and only serves for keeping your SD card tidy of files you won't need.
|
|
|
|
:::
|
|
|
|
:::: tabs
|
|
|
|
::: tab name="Memory Pit" default
|
|
|
|
- Delete the `sd:/private/ds/app/484E494A/pit.bin` file from your SD card
|
|
- Rename `tip.bin` back to `pit.bin`, and leave it intact
|
|
- You can now restore the `DCIM` folder that was on the root of your SD card
|
|
- Delete the `UNLAUNCH.DSI` file from your SD card
|
|
|
|
:::
|
|
|
|
::: tab name="Flipnote Lenny"
|
|
|
|
- Delete the `800031_104784BAB6B57_000.ppm` and `T00031_1038C2A757B77_000.ppm` files from inside the following folders:
|
|
- `sd:/private/ds/app/4B47554A/001` (Japan)
|
|
- `sd:/private/ds/app/4B475545/001` (USA)
|
|
- `sd:/private/ds/app/4B475556/001` (Europe/Australia)
|
|
- You can also delete the entire folders for the regions besides your own
|
|
- Delete the `UNLAUNCH.DSI` file from your SD card
|
|
|
|
:::
|