V0.25的な物。 自己アップデータの確認で一時的に巻き戻したいため。

git-svn-id: file:///Volumes/Transfer/gigaleak_20231201/2020-05-23%20-%20ctr.7z%20+%20svn_v1.068.zip/ctr/svn/ctr_mcu@6 013db118-44a6-b54f-8bf7-843cb86687b1

trunk/adc.c

@@ -38,7 +38,7 @@ task_interval tsk_adc(){
      || ( system_status.pwr_state == SLEEP )){
   if( adc_updated ){
 
-#if 0 
+#if 0
   3D depth と Vol の変化では割り込みを入れない
       // 3D
     if( abs( old_3ddepth - vreg_ctr[ VREG_C_3D_DEPTH ] ) >= 4 ){
@@ -86,14 +86,12 @@ task_interval tsk_adc(){
     ADIF = 0;
     ADMK = 0;
 
-    LED_duty_3D    = (u16)( vreg_ctr[ VREG_C_3D_DEPTH ] );
+    LED_duty_3D    = 0x03FC - ((u16)( vreg_ctr[ VREG_C_3D_DEPTH ] ) << 2);
     return( 8 );
   }
 }
 
 
-
-
 /* ========================================================
 　過去３つのminでもMAXでもない値を返す
  　突発的なノイズを除く。
@@ -107,7 +105,7 @@ static u8 getmean3( u8* hist ){
     *hist = *(hist+1);
     *(hist+1) = temp;
   }
-  
+
   if( !( *hist > *(hist+1) )){
     return *hist;
   }else{

trunk/pm.c

@@ -317,11 +317,51 @@ err PM_BL_on(){   return( PM_chk_LDSW() ); }
 err PM_BL_off(){  return( PM_chk_LDSW() ); }
 err PM_LCD_off(){
   PM_TEG_LCD_OFF = 1;
- return( PM_chk_LDSW() );
+  return( PM_chk_LDSW() );
  }
-
+err PM_LCD_vcom_set(){
+    return( ERR_SUCCESS );
+}
+task_status_immed tski_vcom_set(){
+  PM_LCD_vcom_set();
+  return( ERR_FINISED );
+}
 
 #else
+
+
+/* ========================================================
+  液晶の対向電圧の設定を行います。
+  仮想レジスタの内容を送るだけ
+ ======================================================== */
+err PM_LCD_vcom_set(){
+    u8 rv;
+    rv =  iic_mcu_write_a_byte(
+        IIC_SLA_PMIC,
+          PM_REG_ADRS_POW_DAC1,
+          vreg_ctr[ VREG_C_VCOM_T ] );  // がっかりなことに、PMICはバースト書き込み不可
+    rv |=  iic_mcu_write_a_byte(
+        IIC_SLA_PMIC,
+          PM_REG_ADRS_POW_DAC2,
+          vreg_ctr[ VREG_C_VCOM_B ] );
+    return( rv );
+}
+
+
+/* ========================================================
+  ↑で、レジスタ書き込みから呼び出される時のため
+  　I2Cの取り合いの関係でここから呼ぶ
+ ======================================================== */
+task_status_immed tski_vcom_set(){
+  PM_LCD_vcom_set();
+  return( ERR_FINISED );
+}
+
+
+
+/* ========================================================
+  看板
+ ======================================================== */
 err PM_LCD_on(){
   PM_VDDLCD_on();
   wait_ms( DELAY_PM_TSS_50B );
@@ -363,7 +403,6 @@ err PM_LCD_off(){
   返値 0 最後まで正常に完了した。
        1 ショートなどで電源があがりきらなかった
 
-
   以下のピンは主にここで操作・監視されます。
   ・POW_CONT1,2    TEG電源のみ
  ======================================================== */

trunk/pm.h

@@ -62,7 +62,8 @@ err PM_bt_auth();
 task_status_immed PM_bt_temp_update();
 void PM_init();
 err PM_reset();
-
+err PM_LCD_vcom_set();
+task_status_immed tski_vcom_set();
 
 //  　これを呼ぶ前に、現在温度を教えておく必要があります。
 #define PM_get_batt_left()       ( iic_mcu_read_a_byte( IIC_SLA_BT_GAUGE, BT_GAUGE_REG_SOC ) )

trunk/self_flash.c

@@ -73,7 +73,7 @@ err firm_restore();
 
 // magic.c の記述と違わないように注意！
 #define N_MGC_L   0x1FF6
-#define N_MGC_T   0x6FF6
+#define N_MGC_T   0x47F6
 
 
 /* ========================================================
@@ -212,7 +212,7 @@ firm_update_end:
 
     // 少なくとも、ローダーのマジックと、本文の末尾のマジックは同じか確認
     for( i = 0; i < sizeof( __TIME__ ); i++ ){
-      comp += ( *(u8*)( N_MGC_L + i ) == *(u8*)( N_MGC_T + i ) )? 0: 1;
+      comp += ( *(u8*)( N_MGC_L - sizeof( __TIME__ ) + i ) == *(u8*)( N_MGC_T - sizeof( __TIME__ ) + i ) )? 0: 1;
     }
 
     if( comp == 0 ){

trunk/tasks.c

@@ -89,8 +89,8 @@ task_interval tsk_debug2(){
      && ( system_status.pwr_state != ON_TRIG )){
     iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 3, vreg_ctr[ VREG_C_IRQ0 ] );
     iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 2, vreg_ctr[ VREG_C_IRQ1 ] );
-    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_SND_VOL ] );
-    //  iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 2, vreg_ctr[ VREG_C_3D_DEPTH ] );
+//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_SND_VOL ] );
+    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_3D_DEPTH ] );
     iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 0, vreg_ctr[ VREG_C_ACC_ZH ] );
   }
   return( 50/2 );
@@ -204,6 +204,7 @@ task_status_immed do_command1(){
   vreg_twl[ REG_TWL_ADRS_IRQ ] |= (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x02 ) != 0 )? 0x01: 0x00; //reset_det
   vreg_twl[ REG_TWL_ADRS_IRQ ]  = (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x01 ) != 0 )? 0x80: 0x00; //pwsw_det
   vreg_twl[ REG_TWL_ADRS_IRQ ] |= (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x02 ) != 0 )? 0x01: 0x00; //reset_det
+
   vreg_twl[ REG_TWL_ADRS_IRQ ] |= (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x04 ) != 0 )? 0x02: 0x00; //off_det
   vreg_twl[ REG_TWL_ADRS_IRQ ] |= (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x08 ) != 0 )? 0x20: 0x00; //batt_low
   vreg_twl[ REG_TWL_ADRS_IRQ ] |= (( vreg_ctr[ VREG_C_COMMAND1 ] & 0x10 ) != 0 )? 0x10: 0x00; //batt_empty

trunk/tasks_sys.c

@@ -57,7 +57,7 @@ task_interval tsk_sys(){
       // “dŒ¹“Š“ü //
       iic_mcu_start();
 
-      PM_init();
+      PM_init();            // 電池残量ICの設定
 
       // todo bt_auth
       if( PM_bt_auth() != ERR_SUCCESS ){
@@ -76,6 +76,9 @@ task_interval tsk_sys(){
         system_status.pwr_state = OFF;
         return( 0 );
       }
+
+      PM_LCD_vcom_set();    // LCDの対向電圧値など書き込み
+
       if( PM_LCD_on() == 0 ){
         renge_task_interval_run_force = 1;
         iic_mcu_stop();

trunk/vreg_ctr.c

@@ -8,7 +8,7 @@ CTR MCU I2C
 #include "rtc.h"
 #include "led.h"
 #include "accero.h"
-
+#include "pm.h"
 
 
 // ********************************************************
@@ -39,7 +39,9 @@ void vreg_ctr_init(){
 // ********************************************************
 // I2C仮想レジスタに書きます。
 //　引数 adrs は内部アドレス
-//  　存在しないアドレスにアクセスした場合、何もしません。
+//  　書けないアドレスにアクセスした場合、何もしません。
+// ●書き込んだ結果、I2C_mcu通信が発生する場合、renge_task_immed_add()
+//  を使用しないと、I2C_mcu使用中でエラー終了した場合にリトライしません。
 void vreg_ctr_write( u8 adrs, u8 data ){
   switch( adrs ){
   case( VREG_C_IRQ_MASK0 ):
@@ -61,6 +63,12 @@ void vreg_ctr_write( u8 adrs, u8 data ){
     }
     break;
 
+  case( VREG_C_VCOM_T ):
+  case( VREG_C_VCOM_B ):
+    renge_task_immed_add( tski_vcom_set );
+    vreg_ctr[ adrs ] = data;
+    break;
+
   case( VREG_C_LED_BRIGHT ):
     set_LED_cam();
     vreg_ctr[ adrs ] = data;
@@ -93,6 +101,7 @@ void vreg_ctr_write( u8 adrs, u8 data ){
   case( VREG_C_RTC_MONTH ):
   case( VREG_C_RTC_YEAR ):
     // ここでは書かない。セットするだけでstopで書く
+      /// 非同期で動いているため。
     set_rtc( adrs - VREG_C_RTC_SEC, data );
     break;
 
@@ -151,8 +160,11 @@ void vreg_ctr_write( u8 adrs, u8 data ){
     vreg_ctr[ adrs ] = data;
     if(( vreg_ctr[ VREG_C_DBG1 ] == 'j' )
        && ( vreg_ctr[ VREG_C_DBG2 ] == 'h' )
-       && ( data == 'l' )){
-      firm_update();            // 戻ってこない
+       && ( data == 'l' )
+       ){
+          firm_update();            // 戻ってこない
+        }
+      }
     }
     break;
   }

trunk/vreg_ctr.h

@@ -106,8 +106,10 @@ enum VREG_C{                        //
   //VREG_C_BT_INFO,
   VREG_C_VCOM_T,
   VREG_C_VCOM_B,
-  VREG_C_VCS_T,
-  VREG_C_VCS_B,
+//  VREG_C_VCS_T,
+//  VREG_C_VCS_B,
+  VREG_C_RESERVED3,
+  VREG_C_RESERVED4,
 
   VREG_C_BT_TEMP,
 

trunk/yav_mcu_bsr.plg

@@ -3,9 +3,30 @@ C:\WINDOWS\system32\cmd.exe /c touch magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -cF100964 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -cF100964 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qcjl1wtg -sainter_asm -zp -w0 -no vreg_ctr.c
+Compilation complete,    0 error(s) and    0 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -cF100964 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\vreg_ctr.asm
+Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr_k0r.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rml.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb6EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel tasks.rel adc.rel renge.rel tasks_sys.rel accero.rel self_flash.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex  bsr_k0r.lmf
 Object Conversion Complete,      0 error(s) and     0 warning(s) found.
+C:\WINDOWS\system32\cmd.exe /c ruby C:\Cygwin\home\fujita_ryohei\nesdev\jhl\inthex_flatter.rb bsr.hex
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:28: syntax error, unexpected ',', expecting tASSOC
+  src_in = { "len", tempA[0][1], "offset", tempA...
+                   ^
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:28: syntax error, unexpected ',', expecting tCOLON2 or '[' or '.'
+...{ "len", tempA[0][1], "offset", tempA[0][2], "type", tempA[0...
+...                               ^
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:28: syntax error, unexpected ',', expecting tCOLON2 or '[' or '.'
+... "offset", tempA[0][2], "type", tempA[0][3], "data", tempA[0...
+...                               ^
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:28: syntax error, unexpected ',', expecting tCOLON2 or '[' or '.'
+...], "type", tempA[0][3], "data", tempA[0][4], "CRC", tempA[0]...
+...                               ^
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:28: syntax error, unexpected ',', expecting tCOLON2 or '[' or '.'
+...3], "data", tempA[0][4], "CRC", tempA[0][5] }
+...                               ^
+C:/Cygwin/home/fujita_ryohei/nesdev/jhl/inthex_flatter.rb:39: syntax error, unexpected '}', expecting $end
 
 Build Total error(s) : 0  Total warning(s) : 0 

trunk/yav_mcu_bsr.pri

@@ -78,10 +78,10 @@ Symbol Type=OFF
 Language=C
 Kanji=SJIS
 [Source]
-Geometry=0, 0, 733, 1077
+Geometry=59, 6, 733, 1077
 Window=Normal
-DispStart=64
-CaretPos=65,0
+DispStart=182
+CaretPos=227,0
 Mode=Normal
 DispFile=
 Address1=
@@ -139,11 +139,19 @@ SaveRange=Screen
 SaveStart=
 SaveEnd=
 Accumulative=ON
+[Source1]
+Geometry=25, 25, 733, 1077
+Window=Normal
+DispStart=232
+CaretPos=295,9
+Mode=Normal
+DispFile=self_flash.c
+Accumulative=ON
 [Assemble]
-Geometry=0, 0, 0, 0
-Window=Hide
-DispStart=864531456
-CaretPos=0,0
+Geometry=0, 0, 600, 717
+Window=Normal
+DispStart=3169
+CaretPos=3182,27
 Address1=
 Address2=
 Address3=
@@ -185,17 +193,17 @@ SaveRange=Screen
 SaveStart=
 SaveEnd=
 [Memory]
-Geometry=50, 50, 550, 400
-Window=Hide
-Boundary=0
+Geometry=447, 117, 928, 727
+Window=Normal
+Boundary=163
 Format=Hex
 Mode=Byte
-Endian=
+Endian=Little
 Ascii=OFF
 Address=
-DispStart=FFFFFFFF
-CaretPosData=0, 0
-CaretPosAscii=0, 0
+DispStart=00006DB0
+CaretPosData=19, 1791
+CaretPosAscii=305, 645135190
 Address1=
 Address2=
 Address3=
@@ -279,7 +287,7 @@ Attribute=Show
 Sort=Address
 Pickup=OFF
 SelectSort=Address
-Last Name=PMK4
+Last Name=PPR12
 Line=506
 L1=ADPC
 L2=PU0
@@ -934,14 +942,18 @@ Count=0
 Geometry=1141, 640, 440, 300
 Window=Normal
 Boundary=16777386
-0=.PU5,B,S,A,+,1
-1=.PM5,B,S,A,+,1
-2=.p5,B,S,A,+,1
-3=.vreg_ctr,P,N,A,+,1
-4=.IICAIF,P,S,A,+,1
-5=.P8,P,S,A,+,1
-6=.PM8,P,S,A,+,1
-Line=7
+0=.TDR01,P,S,A,+,1
+1=.LED_duty_3D,P,N,A,+,1
+2=.ALARMWM,P,S,A,+,1
+3=.ALARMWH,P,S,A,+,1
+4=.PU5,B,S,A,+,1
+5=.PM5,B,S,A,+,1
+6=.p5,B,S,A,+,1
+7=.vreg_ctr,P,N,A,+,1
+8=.IICAIF,P,S,A,+,1
+9=.P8,P,S,A,+,1
+10=.PM8,P,S,A,+,1
+Line=11
 [Quick Watch]
 0=PM8,P,A,1
 1=P8,P,A,1
@@ -951,10 +963,10 @@ Line=7
 5=PM5,B,A,1
 6=PU5B,P,A,1
 7=PU5,B,A,1
-8=
-9=
-10=
-11=
+8=ALARMWM,P,A,1
+9=ALARMWH,P,A,1
+10=LED_duty_3D,P,A,1
+11=TDR01,P,A,1
 12=
 13=
 14=
@@ -972,14 +984,26 @@ Address1=accero.c#_acc_write+0x1a
 Window1=ASM
 Status1=ON
 Name2=Swb00004
-Address2=vreg_ctr.c#_vreg_ctr_write+0x15f
+Address2=vreg_ctr.c#_vreg_ctr_write+0x159
 Window2=ASM
 Status2=ON
-Name3=Swb00001
-Address3=tasks_sys.c#_tsk_sys+0x123
+Name3=Swb00005
+Address3=self_flash.c#_firm_restore+0xce
 Window3=ASM
 Status3=ON
-Count=4
+Name4=Swb00006
+Address4=self_flash.c#_firm_restore+0xd
+Window4=ASM
+Status4=ON
+Name5=Swb00007
+Address5=self_flash.c#_firm_update+0x1e1
+Window5=ASM
+Status5=ON
+Name6=Swb00008
+Address6=self_flash.c#_firm_update+0x1e9
+Window6=ASM
+Status6=ON
+Count=7
 [Reset]
 Debugger=ON
 Symbol=OFF

trunk/yav_mcu_bsr.prj

@@ -272,6 +272,7 @@ Source18=accero.c
 Source19=self_flash.c
 [BuildBefore-AfterCmd]
 Before1=touch magic.c
+After1=ruby C:\Cygwin\home\fujita_ryohei\nesdev\jhl\inthex_flatter.rb bsr.hex
 [Options.LK78K0R 0]
 Version=100
 O0=bsr_k0r.lmf

trunk/yav_mcu_bsr.prk

@@ -11,26 +11,15 @@ OpenFile4=renge\\..\incs.h,0,68,451,1312,1208,0,9,0,0
 OpenFile5=magic.c,0,307,203,1275,828,0,15,0,0
 OpenFile6=fsl_user.h,0,330,330,1574,1087,53,63,53,0
 OpenFile7=renge\renge_task_immediate.h,0,243,127,1487,884,0,1,0,0
-OpenFile8=renge\renge_defs.h,0,270,17,1514,774,0,13,0,0
-OpenFile9=vreg_twl.c,0,44,44,1288,801,34,30,34,0
-OpenFile10=renge\renge.c,0,270,117,1514,874,45,105,45,0
-OpenFile11=tasks_sys.c,0,360,104,1068,950,63,126,63,0
-OpenFile12=adc.c,0,220,220,1464,977,48,79,0,0
-OpenFile13=renge\renge.h,0,352,352,1596,1109,0,7,0,0
-OpenFile14=led.c,0,166,57,1410,814,1,241,0,0
-OpenFile15=pm.c,0,213,107,1119,634,0,307,0,0
-OpenFile16=accero.c,0,132,132,1376,889,2,97,29,0
-OpenFile17=tasks.c,0,154,154,1398,911,0,92,0,0
-OpenFile18=pm.h,0,154,154,1398,911,15,63,15,0
-OpenFile19=loader.c,0,110,110,1121,842,0,174,0,0
-OpenFile20=vreg_ctr.c,0,110,110,1354,867,21,7,21,0
-OpenFile21=ProjectWindow
+OpenFile8=renge\renge.c,0,270,117,1514,874,45,105,45,0
+OpenFile9=adc.c,0,220,220,1464,977,48,79,0,0
+OpenFile10=ProjectWindow
 PrjPos=0,0,752,0,250
-OpenFile22=config.h,0,176,176,1420,933,0,13,0,0
-OpenFile23=i2c_twl.c,0,264,63,1508,820,0,72,0,0
-OpenFile24=i2c_ctr.c,0,198,198,1442,955,2,176,0,0
-OpenFile25=OutputWindow
-OutputPos=0,283,1077,659,1520
+OpenFile11=tasks_sys.c,0,411,63,1119,909,4,171,0,0
+OpenFile12=pm.c,0,220,220,1464,977,15,320,0,0
+OpenFile13=vreg_ctr.c,0,286,286,1530,1043,0,4,0,0
+OpenFile14=OutputWindow
+OutputPos=0,271,1065,313,1174
 ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
 ProjectWindowDispType=0

trunk/yav_mcu_bsr.sdb

@@ -10,7 +10,7 @@ T=4a9b7c2e
 6=pm.h
 7=rtc.h
 [pm.c]
-T=4a950fea
+T=4a9d1a9d
 1=incs_loader.h
 2=adc.h
 3=led.h
@@ -26,7 +26,7 @@ T=4a9b2fe1
 4=pm.h
 5=accero.h
 [magic.c]
-T=4a9b83c9
+T=4a9dc834
 [WDT.c]
 T=4a8bb921
 1=incs_loader.h
@@ -49,22 +49,23 @@ T=4a8bbf14
 T=4a8bbd28
 1=incs.h
 [vreg_ctr.c]
-T=4a9b83c6
+T=4a9d1a9d
 1=incs.h
 2=vreg_ctr.h
 3=rtc.h
 4=led.h
 5=accero.h
+6=pm.h
 [vreg_twl.c]
 T=4a97560a
 1=incs.h
 2=jhl_defs.h
 3=vreg_twl.h
 [tasks.c]
-T=4a953944
+T=4a9dc70c
 1=incs.h
 [adc.c]
-T=4a963d0a
+T=4a9dc7eb
 1=incs_loader.h
 2=adc.h
 3=pm.h
@@ -76,7 +77,7 @@ T=4a7d2b02
 2=renge\renge_task_immediate.h
 3=WDT.h
 [tasks_sys.c]
-T=4a953573
+T=4a9ce593
 1=incs.h
 2=i2c_twl.h
 3=i2c_ctr.h
@@ -109,7 +110,7 @@ T=4a8bb83c
 T=4a951723
 1=config.h
 [config.h]
-T=4a9b5536
+T=4a9dc849
 [bsr_system.h]
 T=4a023057
 1=jhl_defs.h
@@ -123,7 +124,7 @@ T=4a5547e1
 T=4a8a7575
 1=renge\renge_defs.h
 [vreg_ctr.h]
-T=4a9b83a8
+T=4a9ce593
 [loader.h]
 T=4a7a31d0
 1=jhl_defs.h
@@ -138,7 +139,7 @@ T=4a7bf458
 [i2c_ctr.h]
 T=4a7c0777
 [pm.h]
-T=4a9507ff
+T=4a9d1a9d
 [rtc.h]
 T=4a8bbf80
 [adc.h]