Support for raw str/bytes already exists, and extending that to raw
f-strings is easy. It also reduces code size because it eliminates an
error message.
Signed-off-by: Damien George <damien@micropython.org>
This is quite a simple and small change to support concatenation of
adjacent f-strings, and improve compatibility with CPython.
Signed-off-by: Damien George <damien@micropython.org>
fdilibm was originally meant to see _IEEE_LIBM defined from outside the
libm code, not it being hardcoded in. Picolibc assumes this assumption
holds true and attempts to define itself, conflicting with the existing
definition.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This adds a RISC-V RV32 semihosting implementation, with all defined
system calls exposed to the user.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Make room for RISC-V semihosting code, by renaming the existing
`semihosting.[ch]` files into `semihosting_arm.[ch]`.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
When no usable manifest directives are found (as opposed to no manifest
being set in the makefile), non-compiling code was generated for the
empty frozen constants pool block.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
At startup, buffer initial stdout / MicroyPthon banner so that it can be
sent to the host on initial connection of the USB serial port. This
buffering also works for when the CDC becomes disconnected and the device
is still printing to stdout, and when CDC is reconnected the most recent
part of stdout (depending on how big the internal USB FIFO is) is flushed
to the host.
This change is most obvious when you've first plugged in a MicroPython
device (or hit reset), when it's a board that uses USB (CDC) serial in the
chip itself for the REPL interface. This doesn't apply to UART going via a
separate USB-serial chip.
The stm32 port already has this buffering behaviour (it doesn't use
TinyUSB) and this commit extends such behaviour to rp2, mimxrt, samd and
renesas-ra ports, which do use TinyUSB.
Signed-off-by: Andrew Leech <andrew@alelec.net>
This implements network.ipconfig() and network.WLAN.ipconfig() when the
ninaw10 driver is used for WLAN.
Due to a omission in the ninaw10 driver stack, setting the DNS address has
no effect. But the interface is kept here just in case it's fixed
eventually.
dhcp4 and has_dhcp4 are dummy arguments. Ninaw10 seems to always use DHCP.
Signed-off-by: robert-hh <robert@hammelrath.com>
This tool is used to compute size differences in the firmware (eg as part
of CI), but it doesn't currently check any firmware that has bare-metal
lwIP/networking, making it hard to see how firmware size changes when
networking related changes are made.
So, change the board selection for the rp2 port to RPI_PICO_W. Changes in
size to standard RPI_PICO firmware will be very similar to other bare-metal
boards like PYBV10.
Signed-off-by: Damien George <damien@micropython.org>
Assuming that ${MICROPY_PORT_DIR}/boards/${MICROPY_BOARD} is equal to
${MICROPY_BOARD_DIR} is not valid, because the latter could point to a path
outside the main MicroPython repository.
Replace this path with the canonical ${MICROPY_BOARD_DIR} so that pins.csv
is correctly located when building against out-of-tree board definitions.
Additionally remove MICROPY_BOARDS_DIR to discourage similar mistakes.
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Without this change going to lightsleep stops the USB peripheral clock, and
can lead to either the device going into a weird state or the host deciding
to issue a bus reset.
This change only keeps the USB peripheral clocks enabled if the USB device
is currently active and a host has configured the device. This means the
USB device continues to respond to host transfers and (presumably) will
even complete pending endpoint transfers. All other requests are NAKed
while still asleep, but the interaction with the host seems to resume
correctly on wake
Otherwise, if USB is not active or configured by a host, USB clocks are
disabled, the same as before.
With the change, one can issue a `machine.lightsleep(...)` with USB CDC
connected and the USB CDC remains connected during the sleep and resumes
when the lightsleep finishes.
Tested on a RPi Pico, the power consumption is:
- During normal idle at the REPL, about 15.3mA.
- During lightsleep, prior to this change, about 1.35mA.
- During lightsleep, with this change and USB CDC connected, about 3.7mA.
If power consumption should be as low as possible when USB is connected,
one can use `machine.USBDevice` to disable the USB before entering
lightsleep.
As discussed at https://github.com/orgs/micropython/discussions/14401
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
To avoid undefined references to `mp_thread_begin_atomic_section()` /
`mp_thread_end_atomic_section()`, replace them with the
`MICROPY_BEGIN_ATOMIC_SECTION` / `MICROPY_END_ATOMIC_SECTION`
macros. That way, it's possible to build again with `MICROPY_PY_THREAD`
disabled (made possible by efa54c27b9).
Fixes commit 19844b4983.
Signed-off-by: Matthias Blankertz <matthias@blankertz.org>
This fixes the build for some esp32 and nrf boards (for example
`ARDUINO_NANO_33_BLE_SENSE` and `ARDUINO_NANO_ESP32`) due to commit
c98789a6d8. Changes are:
- Allow the CDC TX/RX functions in `mp_usbd_cdc.c` to be enabled
separately to those needed for `MICROPY_HW_USB_CDC_1200BPS_TOUCH`.
- Add `MICROPY_EXCLUDE_SHARED_TINYUSB_USBD_CDC` option as a temporary
workaround for the nrf port to use.
- Declare `mp_usbd_line_state_cb()` in a header as a public function.
- Fix warning with type cast of `.callback_line_state_changed`.
Signed-off-by: Damien George <damien@micropython.org>
Update to the issue forms added earlier this year, that seem to generally
be working well. Improvements in this commit:
- No longer generates TODO checklists in new issues.
- Issue bodies (and therefore email previews) no longer start with the same
fixed checklist text for each new issue.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
There are a few TinyUSB CDC functions used for stdio that are currently
replicated across a number of ports. Not surprisingly in a couple of cases
these have started to diverge slightly, with additional features added to
one of them.
This commit consolidates a couple of key shared functions used directly by
TinyUSB based ports, and makes those functions available to all.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Since C99, `FLT_EVAL_METHOD` should be left for the compiler/libc to
define. Its redefinition breaks compilation with picolibc as the
target's libc, since it defines said symbol in math.h before the libm
define is evaluated by the compiler.
In its place, there is a check to make sure floating point type sizes
are what are expected to be, triggering a compilation error if those
assumptions are no longer valid.
Co-authored-by: Angus Gratton <angus@redyak.com.au>
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Previously, this was subject to races incrementing/decrementing
the counter variable pendsv_lock.
Technically, all that's needed here would be to make pendsv_lock an atomic
counter.
This implementation fulfils a stronger guarantee: it also provides mutual
exclusion for the core which calls pendsv_suspend(). This is because the
current use of pendsv_suspend/resume in MicroPython is to ensure exclusive
access to softtimer data structures, and this does require mutual
exclusion.
The conceptually cleaner implementation would split the mutual exclusion
part out into a softtimer-specific spinlock, but this increases the
complexity and doesn't seem like it makes for a better implementation in
the long run.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The best_effort_wfe_or_timeout() and sleep_us() pico-sdk functions use the
pico-sdk alarm pool internally, and that has a bug.
Some usages inside pico-sdk (notably multicore_lockout_start_blocking())
will still end up calling best_effort_wfe_or_timeout(), although usually
with "end_of_time" as the timeout value so it should avoid any alarm pool
race conditions.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Progress towards removing pico-sdk alarm pool, due to a known issue.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
In CPython 3.12 these invalid str/bytes/fstring escapes will issue a
SyntaxWarning, and so differ to MicroPython.
Signed-off-by: Damien George <damien@micropython.org>
Otherwise CPython gives a deprecation warning.
This test is not actually testing inversion of bools, rather that bit of
the test is used to compute the pass/fail result.
Signed-off-by: Damien George <damien@micropython.org>
This brings in:
- fixes to: aiohttp, tarfile, lora, gzip
- fixes and improvements to aioble
- deprecation of cbor2 decoder and encoder modules
- new usb package
- new pyusb package
Signed-off-by: Damien George <damien@micropython.org>
