catastrophic compilation time in the event of unreasonable LLVM
IR. Code quality is a separate issue--someone upstream needs to do a
better job of reducing to llvm.memcpy. If the situation can be reproduced with
any supported frontend, then it will be a separate bug.
llvm-svn: 118904
value type, so there is no point in passing it around using
an EVT. Use the simpler MVT everywhere. Rather than trying
to propagate this information maximally in all the code that
using the calling convention stuff, I chose to do a mainly
low impact change instead.
llvm-svn: 118167
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
llvm-svn: 115243
edited during emission.
If the basic block ends in a switch that gets lowered to a jump table, any
phis at the default edge were getting updated wrong. The jump table data
structure keeps a pointer to the header blocks that wasn't getting updated
after the MBB is split.
This bug was exposed on 32-bit Linux when disabling critical edge splitting in
codegen prepare.
The fix is to uipdate stale MBB pointers whenever a block is split during
emission.
llvm-svn: 115191
when the unconditional branch destination is the fallthrough block. The
canonicalization makes it easier to allow optimizations on DAGs to invert
conditional branches. The branch folding pass (and AnalyzeBranch) will clean up
the unnecessary unconditional branches later.
This is one of the patches leading up to disabling codegen prepare critical edge
splitting.
llvm-svn: 114630
I think I've audited all uses, so it should be dependable for address spaces,
and the pointer+offset info should also be accurate when there.
llvm-svn: 114464
expanding: e.g. <2 x float> -> <4 x float> instead of -> 2 floats. This
affects two places in the code: handling cross block values and handling
function return and arguments. Since vectors are already widened by
legalizetypes, this gives us much better code and unblocks x86-64 abi
and SPU abi work.
For example, this (which is a silly example of a cross-block value):
define <4 x float> @test2(<4 x float> %A) nounwind {
%B = shufflevector <4 x float> %A, <4 x float> undef, <2 x i32> <i32 0, i32 1>
%C = fadd <2 x float> %B, %B
br label %BB
BB:
%D = fadd <2 x float> %C, %C
%E = shufflevector <2 x float> %D, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
ret <4 x float> %E
}
Now compiles into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
addps %xmm0, %xmm0
ret
previously it compiled into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
pshufd $1, %xmm0, %xmm1
## kill: XMM0<def> XMM0<kill> XMM0<def>
insertps $0, %xmm0, %xmm0
insertps $16, %xmm1, %xmm0
addps %xmm0, %xmm0
ret
This implements rdar://8230384
llvm-svn: 112101
since it doesn't work for front-ends which don't emit column information
(which includes llvm-gcc in its present configuration), and doesn't
work for clang for K&R style variables where the variables are declared
in a different order from the parameter list.
Instead, make a separate pass through the instructions to collect the
llvm.dbg.declare instructions in order. This ensures that the debug
information for variables is emitted in this order.
llvm-svn: 108538
occasions, caused code to be generated in a different order.
All cases I've seen involved float softening in the type
legalizer, and this could be perhaps be fixed there, but
it's better not to generate things differently in the first
place. 7797940 (6/29/2010..7/15/2010).
llvm-svn: 108484
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
llvm-svn: 108473
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
llvm-svn: 108072
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
llvm-svn: 108039
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 107987
PrologEpilog code, and use it to determine whether
the asm forces stack alignment or not. gcc consistently
does not do this for GCC-style asms; Apple gcc inconsistently
sometimes does it for asm blocks. There is no
convenient place to put a bit in either the SDNode or
the MachineInstr form, so I've added an extra operand
to each; unlovely, but it does allow for expansion for
more bits, should we need it. PR 5125. Some
existing testcases are affected.
The operand lists of the SDNode and MachineInstr forms
are indexed with awesome mnemonics, like "2"; I may
fix this someday, but not now. I'm not making it any
worse. If anyone is inspired I think you can find all
the right places from this patch.
llvm-svn: 107506
for an "i" constraint should get lowered; PR 6309. While
this argument was passed around a lot, this is the only
place it was used, so it goes away from a lot of other
places.
llvm-svn: 106893
Split the code for materializing a value out of
SelectionDAGBuilder::getValue into a helper function, so that it can
be used in other ways. Add a new getNonRegisterValue function which
uses it, for use in code which doesn't want a CopyFromReg even
when FuncMap.ValueMap already has an entry for it.
llvm-svn: 106422
code, and to eliminate the need for the SelectionDAGBuilder
state to be live during CodeGenAndEmitDAG calls.
Call SDB->clear() before CodeGenAndEmitDAG calls instead of
before it, and move the CurDAG->clear() out of SelectionDAGBuilder,
which doesn't own the DAG, and into CodeGenAndEmitDAG.
llvm-svn: 102814
of the dbg testsuite regressions. I don't think this is
really the right fix; this change exposed an existing problem
upstream somewhere.
llvm-svn: 102410
FunctionLoweringInfo, as it isn't SelectionDAG-specific. This isn't
completely natural, as PHI node state is not per-function but rather
per-basic-block, however there's currently no other convenient
per-basic-block state to group it with.
llvm-svn: 102109
into SelectionDAGBuilder. This avoids a separate pass over the
instructions, and has the side effect of providing debug location
information to the copy.
llvm-svn: 101906
const_casts, and it reinforces the design of the Target classes being
immutable.
SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.
And PIC16's AsmPrinter no longer uses TargetLowering.
llvm-svn: 101635
with a fix for self-hosting
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101465
with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101397
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101364
so the user at least knows what inline asm is a problem. For example:
error: inline asm not supported yet: don't know how to handle tied indirect register inputs
pr8788-1.c:14:10: note: generated from here
asm ("\n" : "+r" (stack->regs)
^
Instead of:
fatal error: error in backend: Don't know how to handle tied indirect register inputs yet!
llvm-svn: 100731
