The padding field is reserved for DWARF and does not contain any useful
information. No need to read, store and report it.
Differential Revision: https://reviews.llvm.org/D73042
This structure was used to get the size of the fixed-size part of a Name
Index header for 32-bit DWARF. It is unsuitable for 64-bit DWARF because
the size of the unit length field is different.
Differential Revision: https://reviews.llvm.org/D73040
This helps to detect and report parsing errors better.
The patch follows the ideas of LLDB's patches D59370 and D59381.
It adds tests for valid and some invalid cases. More checks and
tests to come. Note that the patch fixes validation of the Length
field because the value does not include the field itself.
The existing users are updated to show the error messages.
Differential Revision: https://reviews.llvm.org/D71875
Summary:
This patch implements `formatv()` formatting for `dwarf::LineNumberOps`
and makes use of it for the `llvm-dwarfdump --debug-line` dump.
Previously, unknown line number standard opcodes would lead to undefined
behaviour. The code would attempt to format the data pointer of an empty
`StringRef` (a null pointer) using `%s`. According to the description
for `format()`, use of that interface carries the "risk of `printf`".
Passing a null pointer in place of an array to a C library function
results in undefined behaviour.
Reviewers: jhenderson, daltenty, stevewan
Reviewed By: jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72369
Reasonable assumptions can be made when a parsed address length does not
match the expected length, so there's no need for this to be fatal.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D72154
Unlike most of our errors in the debug line parser, the "no end of
sequence" message was missing any reference to which line table it
refererred to. This change adds the offset to this message.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72443
The previous message mentioned DW_LLE_offset_pair, but this is
incorrect/confusing because we can get this message even with DWARF4
(which does not use DW_LLE encodings). This happens because DWARF<=4
location entries are "upgraded" to DWARF v5 during parsing.
The new error message refrains from referencing specific constants.
Fixes pr44482.
If the claimed unit length of a debug line program is such that the line
table would finish past the end of the .debug_line section, an infinite
loop occurs because the data extractor will continue to "read" zeroes
without changing the offset. This previously didn't hit an error because
the line table program handles a series of zeroes as a bad extended
opcode.
This patch fixes the inifinite loop and adds a warning if the program
doesn't fit in the available data.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D72279
When getting the file name form the line table prologue we assume that a
valid string form value can always be extracted as a string. If you look
at the implementation of DWARFormValue this is not necessarily true. I
hit this assertion from LLDB when I create a "dummy" DWARFContext that
was missing the string section.
The V5 directory and filename tables had checks in to make sure we
hadn't read past the end of the line table prologue. Since previous
changes to the data extractor class ensure we never read past the end,
these checks are now redundant, so this patch removes them.
There is still a check to show that the whole prologue remains within
the prologue length.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D71768
Summary:
I used this information to motivate splitting up the Intrinsic::ID enum
(5d986953c8) and adding a key method to
clang::Sema (586f65d31f) which saved a
fair amount of object file size.
Example output for clang.pdb:
Top 10 types responsible for the most TPI input bytes:
index total bytes count size
0x3890: 8,671,220 = 1,805 * 4,804
0xE13BE: 5,634,720 = 252 * 22,360
0x6874C: 5,181,600 = 408 * 12,700
0x2A1F: 4,520,528 = 1,574 * 2,872
0x64BFF: 4,024,020 = 469 * 8,580
0x1123: 4,012,020 = 2,157 * 1,860
0x6952: 3,753,792 = 912 * 4,116
0xC16F: 3,630,888 = 633 * 5,736
0x69DD: 3,601,160 = 985 * 3,656
0x678D: 3,577,904 = 319 * 11,216
In this case, we can see that record 0x3890 is responsible for ~8MB of
total object file size for objects in clang.
The user can then use llvm-pdbutil to find out what the record is:
$ llvm-pdbutil dump -types -type-index 0x3890
Types (TPI Stream)
============================================================
Showing 1 records.
0x3890 | LF_FIELDLIST [size = 4804]
- LF_STMEMBER [name = `WORDTYPE_MAX`, type = 0x1001, attrs = public]
- LF_MEMBER [name = `U`, Type = 0x37F0, offset = 0, attrs = private]
- LF_MEMBER [name = `BitWidth`, Type = 0x0075 (unsigned), offset = 8, attrs = private]
- LF_METHOD [name = `APInt`, # overloads = 8, overload list = 0x3805]
...
In this case, we can see that these are members of the APInt class,
which is emitted in 1805 object files.
The next largest type is ASTContext:
$ llvm-pdbutil dump -types -type-index 0xE13BE bin/clang.pdb
0xE13BE | LF_FIELDLIST [size = 22360]
- LF_BCLASS
type = 0x653EA, offset = 0, attrs = public
- LF_MEMBER [name = `Types`, Type = 0x653EB, offset = 8, attrs = private]
- LF_MEMBER [name = `ExtQualNodes`, Type = 0x653EC, offset = 24, attrs = private]
- LF_MEMBER [name = `ComplexTypes`, Type = 0x653ED, offset = 48, attrs = private]
- LF_MEMBER [name = `PointerTypes`, Type = 0x653EE, offset = 72, attrs = private]
...
ASTContext only appears 252 times, but the list of members is long, and
must be repeated everywhere it is used.
This was the output before I split Intrinsic::ID:
Top 10 types responsible for the most TPI input:
0x686C: 69,823,920 = 1,070 * 65,256
0x686D: 69,819,640 = 1,070 * 65,252
0x686E: 69,819,640 = 1,070 * 65,252
0x686B: 16,371,000 = 1,070 * 15,300
...
These records were all lists of intrinsic enums.
Reviewers: MaskRay, ruiu
Subscribers: mgrang, zturner, thakis, hans, akhuang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71437
This patch fixes an inconsistency where we were using std::function in
some places and function_ref in others to pass around the error handling
callback.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D71762
Now that DWARFv5 provides a way to identify DWARF expressions based on
form, rather than only by attribute - use it to always provide pretty
printing for any exprloc attribute, not only the attributes known to
contain expressions.
Tests "dwarfdump-rnglists-dwarf64.s" and "dwarfdump-rnglists.s" were
malformed because they had missing required DWO ID fields in split
compilation unit headers. The patch fixes the tests and checks
the reading of a unit header more thoroughly.
Differential Revision: https://reviews.llvm.org/D71704
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
Summary:
With -gdwarf-5 local variable locations are emitted as DW_FORM_loclistx
form instead of the regular DW_FORM_sec_offset. Teach
DWARFDie::getLocations to understand the new format and use it in
llvm-symbolizer "FRAME" command.
Reviewers: pcc, jdoerfert
Subscribers: srhines, aprantl, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70756
as it causes a layering violation/dependency cycle:
llvm/lib/CodeGen/AsmPrinter/DwarfDebug.cpp -> llvm/DebugInfo/DWARF/DWARFExpression.h
llvm/include/llvm/DebugInfo/DWARF/DWARFOptimizer.h -> llvm/CodeGen/NonRelocatableStringpool.h
This reverts commit abc7f6800d.
The debug line verbose printing was printing the wrong values for rows
added via DW_LNE_end_sequence, because the row was being printed AFTER
its state had been reset following it being appended to the line table.
This patch fixes this issue by printing the row before appending it.
Reviewers: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D71664
That patch is extracted from the D70709. It moves CompileUnit, DeclContext
into llvm/DebugInfo/DWARF. It also adds new file DWARFOptimizer with
AddressesMap class. AddressesMap generalizes functionality
from RelocationManager.
Differential Revision: https://reviews.llvm.org/D71271
Commit 84a9756 added an extra blank line at the end of any line table.
However, a blank line is also printed after the line table header, which
meant that two blank lines in a row were being printed after a header,
if there were no rows. This patch defers the post-header blank line
printing until it has been determined that there are rows to print.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D71540
This helps delineate it in the output from later tables or other output.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D71344
That patch adds checking into DWARFVerifier that the Skeleton
compilation unit does not have children.
Differential Revision: https://reviews.llvm.org/D71244
The Isa register is a uint8_t, but at least on Windows this is
internally an unsigned char, which meant that prior to this patch it got
formatted as an ASCII character, rather than a decimal number. This
patch fixes this by casting it to a uint64_t before printing. I did it
this way instead of using a uint8_t formatter because a) it is simpler,
and b) it allows us to change the internal type of Isa in the future
without this code breaking.
I also took the opportunity to test the printing of the other standard
opcodes.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D71274
GCC says:
.../llvm/lib/DebugInfo/GSYM/FunctionInfo.cpp:195:12:
error: ‘InfoType’ is not a class, namespace, or enumeration
case InfoType::EndOfList:
^
Presumably, GCC thinks InfoType is a variable here. Work around it by
using the name IT as is done above.
Summary:
Lookup functions are designed to not fully decode a FunctionInfo, LineTable or InlineInfo, they decode only what is needed into a LookupResult object. This allows lookups to avoid costly memory allocations and avoid parsing large amounts of information one a suitable match is found.
LookupResult objects contain the address that was looked up, the concrete function address range, the name of the concrete function, and a list of source locations. One for each inline function, and one for the concrete function. This allows one address to turn into multiple frames and improves the signal you get when symbolicating addresses in GSYM files.
Reviewers: labath, aprantl
Subscribers: mgorny, hiraditya, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70993
Summary:
Currently these function return the raw content of the appropriate table
header, which means they are relative to the DW_AT_{loc,rng}list_base,
and one has to relocate them in order to do anything.
This changes the functions to perform the relocation themselves, which
seems more clearer, particularly as they are sitting right next to the
find{Rng,Loc}listFromOffset functions, but one *cannot* simply take the
result of these functions and take pass them there.
The only effect of this patch is to change what value is dumped for the
DW_AT_ranges attribute, which I think is for the better, as previously
the values appeared to point into thin air.
(The main reason I am looking at this is because I was trying to
implement equivalent functionality in lldb's DWARFUnit, and was stumped
by this behavior.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, llvm-commits, SouraVX
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71006
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
Summary:
lldb's loclists parser has support for DW_LLE_start_end(x) encodings. To
avoid regressing when switching the implementation to llvm's, I add
parsing support for all previously unsupported location list encodings.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70949
Summary:
The dump() function already accepts a callback. This makes
getAbsoluteRanges do the same. The existing DWARFUnit overload is
implemented on top of the new function.
This enables usage of the debug_rnglists parser from within lldb (which
has it's own dwarf parser).
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70952
Summary:
This does exactly what it says on the box. The only small gotcha is the
section index computation for offset_pair entries, which can use either
the base address section, or the section from the offset_pair entry.
This is to support both the cases where the base address is relocated
(points to the base of the CU, typically), and the case where the base
address is a constant (typically zero) and relocations are on the
offsets themselves.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits, probinson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70540
This patch adds support for debug_macinfo.dwo section[pre-standardized]
to llvm and llvm-dwarfdump.
Reviewers: probinson, dblaikie, aprantl, jini.susan.george, alok
Differential Revision: https://reviews.llvm.org/D70705
Tags: #debug-info #llvm
Summary:
Use getSubroutineName() to the the subrouting name; this function knows
how to handle cases when DW_TAG_subprogram refers to an earlier
declaration:
0x00000050: DW_TAG_subprogram
DW_AT_linkage_name ("_ZN1A1fEv")
DW_AT_name ("f")
...
0x00000067: DW_TAG_subprogram
DW_AT_low_pc (0x0000000000000000)
DW_AT_high_pc (0x0000000000000020)
DW_AT_specification (0x00000050 "_ZN1A1fEv")
...
0x0000008c: DW_TAG_variable
Reviewers: pcc, vitalybuka, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70630
Summary:
Support location lists in FRAME command.
These are used for the majority of local variables in optimized code.
Also support DW_OP_breg in addition to DW_OP_fbreg when it refers to the
same register as DW_AT_frame_base.
Reviewers: pcc, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70629
Summary:
llvm-symbolizer protocol is empty string means end-of-output.
Do not emit empty string when a function or a variable do not have a
name for any reason. Emit "??".
Reviewers: pcc, vitalybuka, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70626
