Summary:
A lot of our tests copied the setUp code from our TestSampleTest.py:
```
def setUp(self):
# Call super's setUp().
TestBase.setUp(self)
```
This code does nothing unless we actually do any setUp work in there, so let's remove all these method definitions.
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71454
Summary:
A lot of tests do this trick but the vast majority of them don't even call `print()`.
Most of this patch was generated by a script that just looks at all the files and deletes the line if there is no `print (` or `print(` anywhere else in the file.
I checked the remaining tests manually and deleted the import if we never call print (but instead do stuff like `expr print(...)` and similar false-positives).
I also corrected the additional empty lines after the import in the files that I manually edited.
Reviewers: JDevlieghere, labath, jfb
Reviewed By: labath
Subscribers: dexonsmith, wuzish, nemanjai, kbarton, christof, arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71452
Fix handling concurrent watchpoint events so that they are reported
correctly in LLDB.
If multiple watchpoints are hit concurrently, the NetBSD kernel reports
them as series of SIGTRAPs with a thread specified, and the debugger
investigates DR6 in order to establish which watchpoint was hit. This
is normally fine.
However, LLDB disables and reenables the watchpoint on all threads after
each hit, which results in the hit status from DR6 being wiped.
As a result, it can't establish which watchpoint was hit in successive
SIGTRAP processing.
In order to workaround this problem, clear DR6 only if the breakpoint
is overwritten with a new one. More specifically, move cleaning DR6
from ClearHardwareWatchpoint() to SetHardwareWatchpointWithIndex(),
and do that only if the newly requested watchpoint is different
from the one being set previously. This ensures that the disable-enable
logic of LLDB does not clear watchpoint hit status for the remaining
threads.
This also involves refactoring of watchpoint logic. With the old logic,
clearing watchpoint involved wiping dr6 & dr7, and setting it setting
dr{0..3} & dr7. With the new logic, only enable bit is cleared
from dr7, and the remaining bits are cleared/overwritten while setting
new watchpoint.
Differential Revision: https://reviews.llvm.org/D70025
NetBSD ptrace interface does not populate watchpoints to newly-created
threads. Solve this via copying the watchpoints from the current thread
when new thread is reported via TRAP_LWP.
Add a test that verifies that when the user does not have permissions
to set watchpoints on NetBSD, the 'watchpoint set' errors out gracefully
and thread monitoring does not crash on being unable to copy watchpoints
to new threads.
Differential Revision: https://reviews.llvm.org/D70023
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
This test was timing out on the swift CI bots. I didn't see any obvious reason
for that, and the test hasn't had problems on greendragon. OTOH, it was a bit
oddly written, and needed modernizing, so I did that.
Differential Revision: https://reviews.llvm.org/D69453
This test streamlines our use of variables that are expected by
Makefile.rules throughout the test suite. Mostly it replaced
potentially dangerous overrides and updates of variables like CFLAGS
with safe assignments to variables reserved for this purpose like
CFLAGS_EXTRAS.
Differential Revision: https://reviews.llvm.org/D67984
llvm-svn: 372795
r366433 broke support for the system debugserver. Although the change
was well-intended, it (presumably) unintentionally removed the logic to
copy over the debugserver. As a result, even with
LLDB_USE_SYSTEM_DEBUGSERVER enabled, we ended up building, signing and
using the just-built debugserver.
This patch partially recovers the old behavior: when
LLDB_USE_SYSTEM_DEBUGSERVER is set we don't build debugserver and just
copy over the system one.
Differential revision: https://reviews.llvm.org/D67991
llvm-svn: 372786
Summary:
Instead of each test case knowing its depth relative to the test root,
we can just have dotest add the folder containing Makefile.rules to the
include path.
This was motivated by r370616, though I have been wanting to do this
ever since we moved to building tests out-of-tree.
The only manually modified files in this patch are lldbinline.py and
plugins/builder_base.py. The rest of the patch has been produced by this
shell command:
find . \( -name Makefile -o -name '*.mk' \) -exec sed --in-place -e '/LEVEL *:\?=/d' -e '1,2{/^$/d}' -e 's,\$(LEVEL)/,,' {} +
Reviewers: teemperor, aprantl, espindola, jfb
Subscribers: emaste, javed.absar, arichardson, christof, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D67083
llvm-svn: 370845
Today I discovered the skipLongRunningTest decorator and to my surprise
all the tests were passing without the decorator. They don't seem to be
that expensive either, they take a few seconds but we have tests that
take much longer than that. As such I propose to remove the decorator
and enable them by default.
Differential revision: https://reviews.llvm.org/D66774
llvm-svn: 369995
This test was frequently hanging on Windows, causing a timeout after
10 minutes. The short delay (100 microsecond) in the sample program
could cause a deadlock in the Windows thread pool, as I've explained
in the test program's comments.
Now that it doesn't hang, it passes reliably, so I've removed the
Windows-specific XFAIL.
I've tried to clarify the comments in TestThreadSpecificGBreakpoint.py
by eliminating some redundancy and typos, and I simplified away a
couple unnecessary assignments.
Differential Revision: https://reviews.llvm.org/D65546
llvm-svn: 367573
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
It looks like when this test was added, it was based on TestBreakAfterJoin and it ended up with the same class name. This is an issue because the logs associated with the tests use the class name as the identifier for the file and if two tests have the same name their logs overwrite each other. On non-windows, this just means we lose one of the logs, but on Windows this means that one of the tests will fail occasionally because the file are locked by the other test.
llvm-svn: 364826
Add a convenience 'expectedFailureNetBSD' decorator and mark all tests
currently failing on NetBSD with it. Also skip a few tests that hang
the test suite. This should establish a baseline for the test suite
and get us closer to enabling tests on buildbot. This will help us
catch regressions while we still have a lot of work to do to get tests
working.
It seems that there are also some flaky tests. I am going to address
them later on.
Differential Revision: https://reviews.llvm.org/D58527
llvm-svn: 355320
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is a set of tests that were all marked as failing becuse of several different bugs. A couple of the bugs are now resolved as fixed since all the tests that were failing associated with the bug are now passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349713
the "self.assertEqual(thread.GetStopReason(), lldb.eStopReasonSignal)"
was occasionally failing because the stop reason would come out as
"trace" this happened if we issued the interrupt just as the processed
stopped due to single-stepping over the breakpoint (i.e., the it was not
necessary to send any signal).
Fix this by removing the breakpoint before resuming the process. This
ensures the process can run unobstructed.
After this, the test passed 200 consecutive runs successfully for me,
even while the system was under heavy load.
llvm-svn: 349491
This test is passing now on linux. The same test is claimed to be flaky
on darwin, so it's possible that's true on linux too. If that's the case
we'll have to skip it here too (or fix it).
I mark the test as not-debug-info-dependent as a drive-by.
llvm-svn: 349482
max number of stack frames to backtrace, make it a setting,
target.process.thread.max-backtrace-depth.
Add a test case for the setting.
<rdar://problem/28759559>
llvm-svn: 343029
Summary:
1) Several tests that are flakey on windows fail the run even if they are marked as expected to be flakey. This is because they fail frequently enough that even a retry won't help
2) Skip several tests on Windows that will occasionally hang rather than failing or exiting. This is causing the entire test suite to hang
Reviewers: asmith, labath, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D50198
llvm-svn: 338769
Summary:
The test suite has often unnecessary trailing whitespace, and sometimes
unnecessary trailing lines or a missing final new line. This patch just strips
trailing whitespace/lines and adds missing newlines at the end.
Subscribers: ki.stfu, JDevlieghere, christof, lldb-commits
Differential Revision: https://reviews.llvm.org/D49943
llvm-svn: 338171
pseudo_barrier_wait() begins by decrementing an atomic variable. Since
these are always_inline in libc++, there is no line table anchor to
break on before we decrement it. This meant that on gcc we stopped after
the variable has been decremented, which meant that thread2 could have
exited, violating the test setup. On clang this wasn't a problem
because it generated some line table entries for the do{}while(0) loop
in the macro, so we still ended up stopping, before we touched the
variable.
I fix this by adding a dummy statement before the pseudo_barrier_wait()
command and setting the breakpoint there.
llvm-svn: 335476
Filenames with test results contain only the class name which makes it more
difficult to find it if the same class name is present in multiple *.py files.
packages/Python/lldbsuite/test/functionalities/step-avoids-no-debug/TestStepNoDebug.py
-class ReturnValueTestCase(TestBase):
+class StepAvoidsNoDebugTestCase(TestBase):
as ReturnValueTestCase is already present in:
packages/Python/lldbsuite/test/functionalities/return-value/TestReturnValue.py
packages/Python/lldbsuite/test/functionalities/thread/crash_during_step/TestCrashDuringStep.py
-class CreateDuringStepTestCase(TestBase):
+class CrashDuringStepTestCase(TestBase):
as CreateDuringStepTestCase is already present in:
packages/Python/lldbsuite/test/functionalities/thread/create_during_step/TestCreateDuringStep.py
packages/Python/lldbsuite/test/functionalities/thread/step_until/TestStepUntil.py
-class TestCStepping(TestBase):
+class StepUntilTestCase(TestBase):
as TestCStepping is already present in:
packages/Python/lldbsuite/test/lang/c/stepping/TestStepAndBreakpoints.py
llvm-svn: 335431
The problem was that with libc++ the std::unique_lock declaration was
completely inlined, so there was no line table entry in the main.cpp
file to set a breakpoint on. Therefore, the breakpoint got moved to the
next line, but that meant the test would deadlock as the thread would
stop with the lock already held.
I fix that issue by adding a dummy statement before the std::unique_lock
line to anchor the breakpoint.
I think this should fix the issue because of which this test was
disabled on darwin, but someone should verify that before enabling it.
llvm-svn: 335132
Summary: They all correspond to bugs that are already logged and I've added the appropriate (or most appropriate) bug numbers. This leaves only a handful of failing tests.
Reviewers: asmith, zturner, labath
Reviewed By: zturner
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D47892
llvm-svn: 334210
Summary:
- Fix test jump for powerpc64le
Jumping directly to the return line on power architecture dos not means
returning the value that is seen on the code. The last test fails, because
it needs the execution of some assembly in the beginning of the function.
Avoiding this test for this architecture.
- Avoid evaluate environ variable name on Linux
On Linux the Symbol environ conflicts with another variable, then in
order to avoid it, this test was moved into a specific test, which is not
supported if the OS is Linux.
- Added PPC64le as MIPS behavior
Checking the disassembler output, on PPC64le machines behaves as MPIS.
Added method to identify PPC64le architecture and checking it when
disassembling instructions in the test case.
Reviewers: labath
Reviewed By: labath
Subscribers: clayborg, labath, luporl, alexandreyy, sdardis, ki.stfu, arichardson
Differential Revision: https://reviews.llvm.org/D44101
Patch by Leonardo Bianconi <leonardo.bianconi@eldorado.org.br>.
llvm-svn: 327977
These tests all test very similar things, and use the same inferior.
They were only placed in separate folders to achieve better
paralelization. Now that we paralelize at a file level, this is no
longer relevant, and we can put them together again.
llvm-svn: 326159
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
