attribute in sema and issuing a variety of diagnostics lazily
for misuse of this attribute (and what to do) when converting
from CF types to ObjectiveC types (and vice versa).
// rdar://15499111
llvm-svn: 196629
For an init capture, process the initialization expression
right away. For lambda init-captures such as the following:
const int x = 10;
auto L = [i = x+1](int a) {
return [j = x+2,
&k = x](char b) { };
};
keep in mind that each lambda init-capture has to have:
- its initialization expression executed in the context
of the enclosing/parent decl-context.
- but the variable itself has to be 'injected' into the
decl-context of its lambda's call-operator (which has
not yet been created).
Each init-expression is a full-expression that has to get
Sema-analyzed (for capturing etc.) before its lambda's
call-operator's decl-context, scope & scopeinfo are pushed on their
respective stacks. Thus if any variable is odr-used in the init-capture
it will correctly get captured in the enclosing lambda, if one exists.
The init-variables above are created later once the lambdascope and
call-operators decl-context is pushed onto its respective stack.
Since the lambda init-capture's initializer expression occurs in the
context of the enclosing function or lambda, therefore we can not wait
till a lambda scope has been pushed on before deciding whether the
variable needs to be captured. We also need to process all
lvalue-to-rvalue conversions and discarded-value conversions,
so that we can avoid capturing certain constant variables.
For e.g.,
void test() {
const int x = 10;
auto L = [&z = x](char a) { <-- don't capture by the current lambda
return [y = x](int i) { <-- don't capture by enclosing lambda
return y;
}
};
If x was not const, the second use would require 'L' to capture, and
that would be an error.
Make sure TranformLambdaExpr is also aware of this.
Patch approved by Richard (Thanks!!)
http://llvm-reviews.chandlerc.com/D2092
llvm-svn: 196454
substitution failure, allow a flag to be set on the Diagnostic object,
to mark it as 'causes substitution failure'.
Refactor Diagnostic.td and the tablegen to use an enum for SFINAE behavior
rather than a bunch of flags.
llvm-svn: 194444
an additional conversion (other than a qualification conversion) would be
required after the explicit conversion.
Conversely, do allow explicit conversion functions to be used when initializing
a temporary for a reference binding in direct-list-initialization.
llvm-svn: 191150
rather than a post-processing action, so we can support inserting these checks
at stages other than the end of the initialization. No functionality change
intended.
llvm-svn: 191146
AssignConvertType::IncompatibleVectors means the two types are in fact
compatible. :)
No testcase; I don't think the extra init list has any actual visible effect
other than making the resulting AST dump look a bit strange.
llvm-svn: 190845
passing a retainable object arg to a CF audited function
expecting a CF object type. Issue a normal type mismatch
diagnostic. This is wip // rdar://14569171
llvm-svn: 187532
return false;
in a function returning a pointer. 'false' was a null pointer constant in C++98
but is not in C++11. Punch a very small hole in the initialization rules in
C++11 mode to allow this specific case in system headers.
llvm-svn: 184395
the result of a cast-to-reference-type lifetime-extends the object to which the
reference inside the cast binds.
This requires us to look for subobject adjustments on both the inside and the
outside of the MaterializeTemporaryExpr when looking for a temporary to
lifetime-extend (which we also need for core issue 616, and possibly 1213).
llvm-svn: 184024
Introduce CXXStdInitializerListExpr node, representing the implicit
construction of a std::initializer_list<T> object from its underlying array.
The AST representation of such an expression goes from an InitListExpr with a
flag set, to a CXXStdInitializerListExpr containing a MaterializeTemporaryExpr
containing an InitListExpr (possibly wrapped in a CXXBindTemporaryExpr).
This more detailed representation has several advantages, the most important of
which is that the new MaterializeTemporaryExpr allows us to directly model
lifetime extension of the underlying temporary array. Using that, this patch
*drastically* simplifies the IR generation of this construct, provides IR
generation support for nested global initializer_list objects, fixes several
bugs where the destructors for the underlying array would accidentally not get
invoked, and provides constant expression evaluation support for
std::initializer_list objects.
llvm-svn: 183872
CXXCtorInitializers to the point where we perform the questionable lifetime
extension. This exposed a selection of false negatives in the warning.
llvm-svn: 183869
were lacking ExprWithCleanups nodes in some cases where the new approach to
lifetime extension needed them).
Original commit message:
Rework IR emission for lifetime-extended temporaries. Instead of trying to walk
into the expression and dig out a single lifetime-extended entity and manually
pull its cleanup outside the expression, instead keep a list of the cleanups
which we'll need to emit when we get to the end of the full-expression. Also
emit those cleanups early, as EH-only cleanups, to cover the case that the
full-expression does not terminate normally. This allows IR generation to
properly model temporary lifetime when multiple temporaries are extended by the
same declaration.
We have a pre-existing bug where an exception thrown from a temporary's
destructor does not clean up lifetime-extended temporaries created in the same
expression and extended to automatic storage duration; that is not fixed by
this patch.
llvm-svn: 183859
with a string. This case is sort of tricky because we can't modify the
StringLiteral used to represent such initializers.
We are forced to decompose the string into individual characters.
Fixes <rdar://problem/10465114>.
llvm-svn: 183791
into the expression and dig out a single lifetime-extended entity and manually
pull its cleanup outside the expression, instead keep a list of the cleanups
which we'll need to emit when we get to the end of the full-expression. Also
emit those cleanups early, as EH-only cleanups, to cover the case that the
full-expression does not terminate normally. This allows IR generation to
properly model temporary lifetime when multiple temporaries are extended by the
same declaration.
We have a pre-existing bug where an exception thrown from a temporary's
destructor does not clean up lifetime-extended temporaries created in the same
expression and extended to automatic storage duration; that is not fixed by
this patch.
llvm-svn: 183721
handle temporaries which have been lifetime-extended to static storage duration
within constant expressions. This correctly handles nested lifetime extension
(through reference members of aggregates in aggregate initializers) but
non-constant-expression emission hasn't yet been updated to do the same.
llvm-svn: 183283
This commit improves Clang's diagnostics for string initialization.
Where it would previously say:
/tmp/a.c:3:9: error: array initializer must be an initializer list
wchar_t s[] = "Hi";
^
/tmp/a.c:4:6: error: array initializer must be an initializer list or string literal
char t[] = L"Hi";
^
It will now say
/tmp/a.c:3:9: error: initializing wide char array with non-wide string literal
wchar_t s[] = "Hi";
^
/tmp/a.c:4:6: error: initializing char array with wide string literal
char t[] = L"Hi";
^
As a bonus, it also fixes the fact that Clang would previously reject
this valid C11 code:
char16_t s[] = u"hi";
char32_t t[] = U"hi";
because it would only recognize the built-in types for char16_t and
char32_t, which do not exist in C.
llvm-svn: 181880
MSVC provides __wchar_t. This is the same as the built-in wchar_t type
from C++, but it is also available with -fno-wchar and in C.
The commit changes ASTContext to have two different types for this:
- WCharTy is the built-in type used for wchar_t in C++ and __wchar_t.
- WideCharTy is the type of a wide character literal. In C++ this is
the same as WCharTy, and in C it is an integer type compatible with
the type in <stddef.h>.
This fixes PR15815.
llvm-svn: 181587
- References to ObjC bit-field ivars are bit-field lvalues;
fixes rdar://13794269, which got me started down this.
- Introduce Expr::refersToBitField, switch a couple users to
it where semantically important, and comment the difference
between this and the existing API.
- Discourage Expr::getBitField by making it a bit longer and
less general-sounding.
- Lock down on const_casts of bit-field gl-values until we
hear back from the committee as to whether they're allowed.
llvm-svn: 181252
Previously, this compound literal expression (a GNU extension in C++):
(AggregateWithDtor){1, 2}
resulted in this AST:
`-CXXBindTemporaryExpr [...] 'struct Point' (CXXTemporary [...])
`-CompoundLiteralExpr [...] 'struct AggregateWithDtor'
`-CXXBindTemporaryExpr [...] 'struct AggregateWithDtor' (CXXTemporary [...])
`-InitListExpr [...] 'struct AggregateWithDtor'
|-IntegerLiteral [...] 'int' 1
`-IntegerLiteral [...] 'int' 2
Note the two CXXBindTemporaryExprs. The InitListExpr is really part of the
CompoundLiteralExpr, not an object in its own right. By introducing a new
entity initialization kind in Sema specifically for compound literals, we
avoid the treatment of the inner InitListExpr as a temporary.
`-CXXBindTemporaryExpr [...] 'struct Point' (CXXTemporary [...])
`-CompoundLiteralExpr [...] 'struct AggregateWithDtor'
`-InitListExpr [...] 'struct AggregateWithDtor'
|-IntegerLiteral [...] 'int' 1
`-IntegerLiteral [...] 'int' 2
llvm-svn: 181212
to use. This makes very little difference right now (other than suppressing
follow-on errors in some cases), but will matter more once we support deduced
return types (we don't want expressions with undeduced return types in the
AST).
llvm-svn: 181107
Add a CXXDefaultInitExpr, analogous to CXXDefaultArgExpr, and use it both in
CXXCtorInitializers and in InitListExprs to represent a default initializer.
There's an additional complication here: because the default initializer can
refer to the initialized object via its 'this' pointer, we need to make sure
that 'this' points to the right thing within the evaluation.
llvm-svn: 179958
For this source:
const int &ref = someStruct.bitfield;
We used to generate this AST:
DeclStmt [...]
`-VarDecl [...] ref 'const int &'
`-MaterializeTemporaryExpr [...] 'const int' lvalue
`-ImplicitCastExpr [...] 'const int' lvalue <NoOp>
`-MemberExpr [...] 'int' lvalue bitfield .bitfield [...]
`-DeclRefExpr [...] 'struct X' lvalue ParmVar [...] 'someStruct' 'struct X'
Notice the lvalue inside the MaterializeTemporaryExpr, which is very
confusing (and caused an assertion to fire in the analyzer - PR15694).
We now generate this:
DeclStmt [...]
`-VarDecl [...] ref 'const int &'
`-MaterializeTemporaryExpr [...] 'const int' lvalue
`-ImplicitCastExpr [...] 'int' <LValueToRValue>
`-MemberExpr [...] 'int' lvalue bitfield .bitfield [...]
`-DeclRefExpr [...] 'struct X' lvalue ParmVar [...] 'someStruct' 'struct X'
Which makes a lot more sense. This allows us to remove code in both
CodeGen and AST that hacked around this special case.
The commit also makes Clang accept this (legal) C++11 code:
int &&ref = std::move(someStruct).bitfield
PR15694 / <rdar://problem/13600396>
llvm-svn: 179250
The TypeLoc hierarchy used the llvm::cast machinery to perform undefined
behavior by casting pointers/references to TypeLoc objects to derived types
and then using the derived copy constructors (or even returning pointers to
derived types that actually point to the original TypeLoc object).
Some context is in this thread:
http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-December/056804.html
Though it's spread over a few months which can be hard to read in the mail
archive.
llvm-svn: 175462
MarkMemberReferenced instead of marking functions referenced directly. An audit
of callers to MarkFunctionReferenced and DiagnoseUseOfDecl also caused a few
other changes:
* don't mark functions odr-used when considering them for an initialization
sequence. Do mark them referenced though.
* the function nominated by the cleanup attribute should be diagnosed.
* operator new/delete should be diagnosed when building a 'new' expression.
llvm-svn: 174951
resolving an overloaded function reference within an initializer list.
Previously we would try to resolve the overloaded function reference without
first stripping off the InitListExpr wrapper.
llvm-svn: 172517
Changed getLocStart() and getLocEnd() to be required for Stmts, and make
getSourceRange() optional. The default implementation for getSourceRange()
is build the range by calling getLocStart() and getLocEnd().
llvm-svn: 171067
copy-list-initialization (and doesn't add an additional copy step):
Fill in the ListInitialization bit when creating a CXXConstructExpr. Use it
when instantiating initializers in order to correctly handle instantiation of
copy-list-initialization. Teach TreeTransform that function arguments are
initializations, and so need this special treatment too. Finally, remove some
hacks which were working around SubstInitializer's shortcomings.
llvm-svn: 170489
This does limit these typedefs to being sequences, but no current usage
requires them to be contiguous (we could expand this to a more general
iterator pair range concept at some point).
Also, it'd be nice if SmallVector were constructible directly from an ArrayRef
but this is a bit tricky since ArrayRef depends on SmallVectorBaseImpl for the
inverse conversion. (& generalizing over all range-like things, while nice,
would require some nontrivial SFINAE I haven't thought about yet)
llvm-svn: 170482
properly, rather than faking it up by pretending that a reference member makes
the default constructor non-trivial. That leads to rejects-valids when putting
such types inside unions.
llvm-svn: 169662
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
objc_loadWeak. This retains and autorelease the weakly-refereced
object. This hidden autorelease sometimes makes __weak variable alive even
after the weak reference is erased, because the object is still referenced
by an autorelease pool. This patch overcomes this behavior by loading a
weak object via call to objc_loadWeakRetained(), followng it by objc_release
at appropriate place, thereby removing the hidden autorelease. // rdar://10849570
llvm-svn: 168740
new container so we can safely iterate over them.
The container holding the lookup decls can under certain conditions
be changed while iterating (e.g. because of deserialization).
llvm-svn: 167816
Within the body of the loop the underlying map may be modified via
Sema::AddOverloadCandidate
-> Sema::CompareReferenceRelationship
-> Sema::RequireCompleteType
to avoid the use of invalid iterators the sequence is copied first.
A reliable, though large, test case is available - it will be reduced and
committed shortly.
Patch by Robert Muth. Review by myself, Nico Weber, and Rafael Espindola.
llvm-svn: 166188
-Allow Sema to do more processing on the initial Expr before checking it.
-Remove the special conditions in HandleExpr()
-Move the code so that only one call site is needed.
-Removed the function from Sema and only call it locally.
-Warn on potentially evaluated reference variables, not just casts to r-values.
-Update tests.
llvm-svn: 164951
actually perform value initialization rather than trying to fake it with a call
to the default constructor. Fixes various bugs related to the previously-missing
zero-initialization in this case.
I've also moved this and the other list initialization 'special case' from
TryConstructorInitialization into TryListInitialization where they belong.
llvm-svn: 159733
* Escape #, < and @ symbols where Doxygen would try to interpret them;
* Fix several function param documentation where names had got out of sync;
* Delete param documentation referring to parameters that no longer exist.
llvm-svn: 158472
In addition, I've made the pointer and reference typedef 'void' rather than T*
just so they can't get misused. I would've omitted them entirely but
std::distance likes them to be there even if it doesn't use them.
This rolls back r155808 and r155869.
Review by Doug Gregor incorporating feedback from Chandler Carruth.
llvm-svn: 158104
temporary or an array subobject of a class temporary, and the resulting value
is used to initialize a pointer which outlives the temporary. Such a pointer
is always left dangling after the initialization completes and the array's
lifetime ends.
In order to detect this situation, this change also adds an
LValueClassification of LV_ArrayTemporary for temporaries of array type which
aren't subobjects of class temporaries. These occur in C++11 T{...} and GNU C++
(T){...} expressions, when T is an array type. Previously we treated the former
as a generic prvalue and the latter as a class temporary.
llvm-svn: 157955
in-class initializer for one of its fields. Value-initialization of such
a type should use the in-class initializer!
The former was just a bug, the latter is a (reported) standard defect.
llvm-svn: 156274
off PartialDiagnostic. PartialDiagnostic is rather heavyweight for
something that is in the critical path and is rarely used. So, switch
over to an abstract-class-based callback mechanism that delays most of
the work until a diagnostic is actually produced. Good for ~11k code
size reduction in the compiler and 1% speedup in -fsyntax-only on the
code in <rdar://problem/11004361>.
llvm-svn: 156176
filter_decl_iterator had a weird mismatch where both op* and op-> returned T*
making it difficult to generalize this filtering behavior into a reusable
library of any kind.
This change errs on the side of value, making op-> return T* and op* return
T&.
(reviewed by Richard Smith)
llvm-svn: 155808
- The [class.protected] restriction is non-trivial for any instance
member, even if the access lacks an object (for example, if it's
a pointer-to-member constant). In this case, it is equivalent to
requiring the naming class to equal the context class.
- The [class.protected] restriction applies to accesses to constructors
and destructors. A protected constructor or destructor can only be
used to create or destroy a base subobject, as a direct result.
- Several places were dropping or misapplying object information.
The standard could really be much clearer about what the object type is
supposed to be in some of these accesses. Usually it's easy enough to
find a reasonable answer, but still, the standard makes a very confident
statement about accesses to instance members only being possible in
either pointer-to-member literals or member access expressions, which
just completely ignores concepts like constructor and destructor
calls, using declarations, unevaluated field references, etc.
llvm-svn: 154248
track whether the referenced declaration comes from an enclosing
local context. I'm amenable to suggestions about the exact meaning
of this bit.
llvm-svn: 152491
- getSourceRange().getBegin() is about as awesome a pattern as .copy().size().
I already killed the hot paths so this doesn't seem to impact performance on my
tests-of-the-day, but it is a much more sensible (and shorter) pattern.
llvm-svn: 152419
explicit conversion functions to initialize the argument to a
copy/move constructor that itself is the subject of direct
initialization. Since we don't have that much context in overload
resolution, we end up threading more flags :(.
Fixes <rdar://problem/10903741> / PR10456.
llvm-svn: 151409
We now generate temporary arrays to back std::initializer_list objects
initialized with braces. The initializer_list is then made to point at
the array. We support both ptr+size and start+end forms, although
the latter is untested.
Array lifetime is correct for temporary std::initializer_lists (e.g.
call arguments) and local variables. It is untested for new expressions
and member initializers.
Things left to do:
Massively increase the amount of testing. I need to write tests for
start+end init lists, temporary objects created as a side effect of
initializing init list objects, new expressions, member initialization,
creation of temporary objects (e.g. std::vector) for initializer lists,
and probably more.
Get lifetime "right" for member initializers and new expressions. Not
that either are very useful.
Implement list-initialization of array new expressions.
llvm-svn: 150803
function, provide a specialized diagnostic that indicates the kind of
special member function (default constructor, copy assignment
operator, etc.) and that it was implicitly deleted. Add a hook where
we can provide more detailed information later.
llvm-svn: 150611
used to construct an object of union type with a deleted default constructor
(plus fixes for some related value-initialization corner cases).
llvm-svn: 150502
instead of having a special-purpose function.
- ActOnCXXDirectInitializer, which was mostly duplication of
AddInitializerToDecl (leading e.g. to PR10620, which Eli fixed a few days
ago), is dropped completely.
- MultiInitializer, which was an ugly hack I added, is dropped again.
- We now have the infrastructure in place to distinguish between
int x = {1};
int x({1});
int x{1};
-- VarDecl now has getInitStyle(), which indicates which of the above was used.
-- CXXConstructExpr now has a flag to indicate that it represents list-
initialization, although this is not yet used.
- InstantiateInitializer was renamed to SubstInitializer and simplified.
- ActOnParenOrParenListExpr has been replaced by ActOnParenListExpr, which
always produces a ParenListExpr. Placed that so far failed to convert that
back to a ParenExpr containing comma operators have been fixed. I'm pretty
sure I could have made a crashing test case before this.
The end result is a (I hope) considerably cleaner design of initializers.
More importantly, the fact that I can now distinguish between the various
initialization kinds means that I can get the tricky generalized initializer
test cases Johannes Schaub supplied to work. (This is not yet done.)
This commit passed self-host, with the resulting compiler passing the tests. I
hope it doesn't break more complicated code. It's a pretty big change, but one
that I feel is necessary.
llvm-svn: 150318
cv-unqualified type. This is essential in order to allow move-only objects of
const-qualified types to be copy-initialized via a converting constructor.
llvm-svn: 150309
value of class type, look for a unique conversion operator converting to
integral or unscoped enumeration type and use that. Implements [expr.const]p5.
Sema::VerifyIntegerConstantExpression now performs the conversion and returns
the converted result. Some important callers of Expr::isIntegralConstantExpr
have been switched over to using it (including all of those required for C++11
conformance); this switch brings a side-benefit of improved diagnostics and, in
several cases, simpler code. However, some language extensions and attributes
have not been moved across and will not perform implicit conversions on
constant expressions of literal class type where an ICE is required.
In passing, fix static_assert to perform a contextual conversion to bool on its
argument.
llvm-svn: 149776
to an error, so that users can turn them off if necessary. Note that
this does *not* change the behavior of in a SFINAE context, where we
still flag an error even if the warning is disabled. This matches
GCC's behavior.
llvm-svn: 148701
values and non-type template arguments of integral and enumeration types.
This change causes some legal C++98 code to no longer compile in C++11 mode, by
enforcing the C++11 rule that narrowing integral conversions are not permitted
in the final implicit conversion sequence for the above cases.
llvm-svn: 148439
for it to be used in converted constant expression checking, and fix a couple
of issues:
- Conversion operators implicitly invoked prior to the narrowing conversion
were not being correctly handled when determining whether a constant value
was narrowed.
- For conversions from floating-point to integral types, the diagnostic text
incorrectly always claimed that the source expression was not a constant
expression.
llvm-svn: 148381
fails within a call to a constexpr function. Add -fconstexpr-backtrace-limit
argument to driver and frontend, to control the maximum number of notes so
produced (default 10). Fix APValue printing to be able to pretty-print all
APValue types, and move the testing for this functionality from a unittest to
a -verify test now that it's visible in clang's output.
llvm-svn: 146749
This supports single-element initializer lists for references according to DR1288, as well as creating temporaries and binding to them for other initializer lists.
llvm-svn: 145186
pointer mismatch. Cases covered are: initialization, assignment, and function
arguments. Additional text will give the extra information about the nature
of the mismatch: different classes for member functions, wrong number of
parameters, different parameter type, different return type, and function
qualifier mismatch.
llvm-svn: 145114
implicitly perform an lvalue-to-rvalue conversion if used on an lvalue
expression. Also improve the documentation of Expr::Evaluate* to indicate which
of them will accept expressions with side-effects.
llvm-svn: 143263
expressions: expressions which refer to a logical rather
than a physical l-value, where the logical object is
actually accessed via custom getter/setter code.
A subsequent patch will generalize the AST for these
so that arbitrary "implementing" sub-expressions can
be provided.
Right now the only client is ObjC properties, but
this should be generalizable to similar language
features, e.g. Managed C++'s __property methods.
llvm-svn: 142914
This also applies to C99-style aggregate literals, should they be used in C++11, since they are effectively identical to constructor call list-initialization syntax.
llvm-svn: 142147
- Remodel Expr::EvaluateAsInt to behave like the other EvaluateAs* functions,
and add Expr::EvaluateKnownConstInt to capture the current fold-or-assert
behaviour.
- Factor out evaluation of bitfield bit widths.
- Fix a few places which would evaluate an expression twice: once to determine
whether it is a constant expression, then again to get the value.
llvm-svn: 141561
(No testcase because I don't think we have any way to actually write a testcase for this; the chosen value of NumElements has no effects on anything other than performance and memory usage.)
llvm-svn: 141106
Allow empty initializer lists for scalars, which mean value-initialization.
Constant evaluation for single-element and empty initializer lists for scalars.
Codegen for empty initializer lists for scalars.
Test case comes in next commit.
llvm-svn: 140459
builds a semantic (structured) initializer list, just reports on whether it can match
the given list to the target type.
Use this mode for doing init list checking in the initial step of initialization, which
will eventually allow us to do overload resolution based on the outcome.
llvm-svn: 140457
qualification of a type doesn't affect whether a conversion is a narrowing
conversion.
This doesn't work in template cases because SubstTemplateTypeParmType gets in
the way.
llvm-svn: 138735
[dcl.init.list] as is possible without generalized initializer lists or full
constant expression support, and adds a c++0x-compat warning in C++98 mode.
The FixIt currently uses a typedef's basename without qualification, which is
likely to be incorrect on some code. If it's incorrect on too much code, we
should write a function to get the string that refers to a type from a
particular context.
The warning is currently off by default. I'll fix LLVM and clang before turning
it on.
llvm-svn: 136181
Revert "For C++11, do more checking of initializer lists up-front, enabling some subset of the final functionality. C just leaves the function early. C++98 runs through the same code path, but has no changed functionality either."
This reverts commit ac420c5053d6aa41d59f782caad9e46e5baaf2c2.
llvm-svn: 135210
This is a first baby step towards supporting generalized initializer lists. This also removes an aggregate
test case that was just plain wrong, assuming that non-aggregates couldn't be initialized with initializer lists
in C++11 mode.
llvm-svn: 135177
vector<int>
to
std::vector<int>
Patch by Kaelyn Uhrain, with minor tweaks + PCH support from me. Fixes
PR5776/<rdar://problem/8652971>.
Thanks Kaelyn!
llvm-svn: 134007
retain/release the temporary object appropriately. Previously, we
would only perform the retain/release operations when the reference
would extend the lifetime of the temporary, but this does the wrong
thing across calls.
llvm-svn: 133620
MaterializeTemporaryExpr captures a reference binding to a temporary
value, making explicit that the temporary value (a prvalue) needs to
be materialized into memory so that its address can be used. The
intended AST invariant here is that a reference will always bind to a
glvalue, and MaterializeTemporaryExpr will be used to convert prvalues
into glvalues for that binding to happen. For example, given
const int& r = 1.0;
The initializer of "r" will be a MaterializeTemporaryExpr whose
subexpression is an implicit conversion from the double literal "1.0"
to an integer value.
IR generation benefits most from this new node, since it was
previously guessing (badly) when to materialize temporaries for the
purposes of reference binding. There are likely more refactoring and
cleanups we could perform there, but the introduction of
MaterializeTemporaryExpr fixes PR9565, a case where IR generation
would effectively bind a const reference directly to a bitfield in a
struct. Addresses <rdar://problem/9552231>.
llvm-svn: 133521
Language-design credit goes to a lot of people, but I particularly want
to single out Blaine Garst and Patrick Beard for their contributions.
Compiler implementation credit goes to Argyrios, Doug, Fariborz, and myself,
in no particular order.
llvm-svn: 133103
Related result types apply Cocoa conventions to the type of message
sends and property accesses to Objective-C methods that are known to
always return objects whose type is the same as the type of the
receiving class (or a subclass thereof), such as +alloc and
-init. This tightens up static type safety for Objective-C, so that we
now diagnose mistakes like this:
t.m:4:10: warning: incompatible pointer types initializing 'NSSet *'
with an
expression of type 'NSArray *' [-Wincompatible-pointer-types]
NSSet *array = [[NSArray alloc] init];
^ ~~~~~~~~~~~~~~~~~~~~~~
/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:72:1:
note:
instance method 'init' is assumed to return an instance of its
receiver
type ('NSArray *')
- (id)init;
^
It also means that we get decent type inference when writing code in
Objective-C++0x:
auto array = [[NSMutableArray alloc] initWithObjects:@"one", @"two",nil];
// ^ now infers NSMutableArray* rather than id
llvm-svn: 132868
defaulted default constructors.
As it happens, making sure that we handle out-of-line defaulted
functions properly will involved making sure that we actually parse them
correctly, so that's coming after.
llvm-svn: 131224
As far as I know, this implementation is complete but might be missing a
few optimizations. Exceptions and virtual bases are handled correctly.
Because I'm an optimist, the web page has appropriately been updated. If
I'm wrong, feel free to downgrade its support categories.
llvm-svn: 130642
double data[20000000] = {0};
we would blow out the memory by creating 20M Exprs to fill out the initializer.
To fix this, if the initializer list initializes an array with more elements than
there are initializers in the list, have InitListExpr store a single 'ArrayFiller' expression
that specifies an expression to be used for value initialization of the rest of the elements.
Fixes rdar://9275920.
llvm-svn: 129896
This patch authored by Eric Niebler.
Many methods on the Sema class (e.g. ConvertPropertyForRValue) take Expr
pointers as in/out parameters (Expr *&). This is especially true for the
routines that apply implicit conversions to nodes in-place. This design is
workable only as long as those conversions cannot fail. If they are allowed
to fail, they need a way to report their failures. The typical way of doing
this in clang is to use an ExprResult, which has an extra bit to signal a
valid/invalid state. Returning ExprResult is de riguour elsewhere in the Sema
interface. We suggest changing the Expr *& parameters in the Sema interface
to ExprResult &. This increases interface consistency and maintainability.
This interface change is important for work supporting MS-style C++
properties. For reasons explained here
<http://lists.cs.uiuc.edu/pipermail/cfe-dev/2011-February/013180.html>,
seemingly trivial operations like rvalue/lvalue conversions that formerly
could not fail now can. (The reason is that given the semantics of the
feature, getter/setter method lookup cannot happen until the point of use, at
which point it may be found that the method does not exist, or it may have the
wrong type, or overload resolution may fail, or it may be inaccessible.)
llvm-svn: 129143
This successfully performs constructor lookup and verifies that a
delegating initializer is the only initializer present.
This does not perform loop detection in the initialization, but it also
doesn't codegen delegating constructors at all, so this won't cause
runtime infinite loops yet.
llvm-svn: 126552
marking selected overloads into the callers. This allows a few callers
to skip it altogether (they would have anyways because they weren't
interested in successful overloads) or defer until after further checks
take place much like the check required for PR9323 to avoid marking
unused copy constructors.
llvm-svn: 126503
declarations as referenced when in fact we're not going to even form
a call in the AST. This is significant because we attempt to allow as an
extension classes with intentionally private and undefined copy
constructors to have temporaries bound to references, and so shouldn't
warn about the lack of definition for that copy constructor when the
class is internal.
Doug, John wasn't really satisfied with the presence of overloading at
all. This is a stop-gap and there may be a better solution. If you can
give me some hints for how you'd prefer to see this solved, I'll happily
switch things over.
llvm-svn: 126480
designators: allowing codegen when the element initializer is a
constant or something else without a side effect. This unblocks
enough to let process.c in the linux kernel build, PR9257.
llvm-svn: 126056
includes explicitly-specified template arguments) to a function
template specialization in cases where no deduction is performed or
deduction fails. Patch by Faisal Vali, fixes PR7505!
llvm-svn: 126048
compatible, not having the same type.
Fix rdar://8183908 in which compatible vector types weren't initialized properly leading to a crash.
llvm-svn: 124637
derived-to-base cast that also casts away constness (one of the cases
for static_cast followed by const_cast) would be treated as a bit-cast
rather than a derived-to-base class, causing miscompiles and
heartburn.
Fixes <rdar://problem/8913298>.
llvm-svn: 124340
when returning an NRVO candidate expression. For example, this
properly picks the move constructor when dealing with code such as
MoveOnlyType f() { MoveOnlyType mot; return mot; }
The previously-XFAIL'd rvalue-references test case now works, and has
been moved into the appropriate paragraph-specific test case.
llvm-svn: 123992
NRVO candidate for a return statement, to
Sema::getCopyElisionCandidate(), and teach it enough to also determine
the NRVO candidate for a throw expression. We still don't use the
latter information, however.
Along the way, implement core issue 1148, which eliminates copy
elision from catch parameters and clarifies that copy elision cannot
occur from function parameters (which we already implemented).
llvm-svn: 123982
specification. In particular, an rvalue reference can bind to an
initializer expression that is an lvalue if the referent type and the
initializer expression type are not reference-related. This is a newer
formulation to the previous "rvalue references can never bind to
lvalues" rule.
llvm-svn: 123952
working paper's structure. The only functional change here is that we
now handling binding to array rvalues, which we would previously reject.
llvm-svn: 123918
involving rvalue references, to start scoping out what is and what
isn't implemented. In the process, tweak some standards citations,
type desugaring, and teach the tentative parser about && in
ptr-operator.
llvm-svn: 123913
Note: this is not a C++0x behavior change, it was already like that in MSVC 2003.
This fixes a compile error when parsing MSVC header files with clang.
llvm-svn: 122644
Previously designated anonymous fields were found via name lookup. This redesign uses the fact that an IndirectFieldDecl declaration will always follow an anonymous implicit field to remove the special case of name lookup.
llvm-svn: 122387
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
llvm-svn: 121121
not actually frequently used, because ImpCastExprToType only creates a node
if the types differ. So explicitly create an ICE in the lvalue-to-rvalue
conversion code in DefaultFunctionArrayLvalueConversion() as well as several
other new places, and consistently deal with the consequences throughout the
compiler.
In addition, introduce a new cast kind for loading an ObjCProperty l-value,
and make sure we emit those nodes whenever an ObjCProperty l-value appears
that's not on the LHS of an assignment operator.
This breaks a couple of rewriter tests, which I've x-failed until future
development occurs on the rewriter.
Ted Kremenek kindly contributed the analyzer workarounds in this patch.
llvm-svn: 120890
about deprecated Objective-C pointer conversions. Plus, make sure to
actually set an appropriate AssignmentAction when performing an
implicit conversion from an InitializationSequence. Fixes regressions
in the GCC DejaGNU testsuite.
llvm-svn: 120744
A new AST node is introduced:
def IndirectField : DDecl<Value>;
IndirectFields are injected into the anonymous's parent scope and chain back to
the original field. Name lookup for anonymous entities now result in an
IndirectFieldDecl instead of a FieldDecl.
There is no functionality change, the code generated should be the same.
llvm-svn: 119919
NEON vector types need to be mangled in a special way to comply with ARM's ABI,
similar to some of the AltiVec-specific vector types. This patch is mostly
just renaming a bunch of "AltiVecSpecific" things, since they will no longer
be specific to AltiVec. Besides that, it just adds the new "NeonVector" enum.
llvm-svn: 118724
constructor template will not be used to copy a class object to a
value of its own type. We were eliminating all constructor templates
whose specializations look like a copy constructor, which eliminated
important candidates. Fixes PR8182.
llvm-svn: 118418
This adds them where missing, and traces them through PCH. We fix at least one
bug in the extents found by the Index library, and make a lot of refactoring
tools which care about the exact formulation of a constructor call easier to
write. Also some minor cleanups to more consistently follow the friend pattern
instead of the setter pattern when rebuilding a serialized AST.
Patch originally by Samuel Benzaquen.
llvm-svn: 117254
that are suppressed during template argument deduction. This change
queues diagnostics computed during template argument deduction. Then,
if the resulting function template specialization or partial
specialization is chosen by overload resolution or partial ordering
(respectively), we will emit the queued diagnostics at that point.
This addresses most of PR6784. However, the check for unnamed/local
template arguments (which existed before this change) is still only
skin-deep, and needs to be extended to look deeper into types. It must
be improved to finish PR6784.
llvm-svn: 116373
completes support for C1X anonymous struct/union init features:
* Indexed anonymous member initializers should not be expanded. Doing so makes
little sense and would cause unresolvable semantic ambiguity in valid code
(regression introduced by r69153).
* Subobject initialization of (possibly nested) anonymous members are now
referred to with paths relative to the naming record context, eliminating the
synthesis of incorrect implicit InitListExprs that caused CodeGen to assert.
* Field lookup was missing a null check in IdentifierInfo comparison which
caused lookup for a known (already resolved) field to match the first unnamed
data member it encountered leading to silent miscompilation.
* Subobject paths are no longer built using the general purpose
Sema::BuildAnonymousStructUnionMemberPath(). If any corner cases crop up, we
will now assert earlier in Sema instead of passing invalid InitListExprs
through to CodeGen.
Fixes PR6955, from Alp Toker!
llvm-svn: 116098
slot. The easiest way to do that was to bundle up the information
we care about for aggregate slots into a new structure which demands
that its creators at least consider the question.
I could probably be convinced that the ObjC 'needs GC' bit should
be rolled into this structure.
Implement generalized copy elision. The main obstacle here is that
IR-generation must be much more careful about making sure that exactly
llvm-svn: 113962
sequences for two conversion functions when in fact we are in the text
of initialization by a user-defined conversion sequences. Fixes PR8034.
llvm-svn: 113724
function-style cast. Previously, we had a (redundant, incorrect)
semantic-checking path for non-class types, which allowed
value-initialization of a reference type and then crashed.
llvm-svn: 113415
One who seeks the Tao unlearns something new every day.
Less and less remains until you arrive at non-action.
When you arrive at non-action,
nothing will be left undone.
llvm-svn: 112244
constructors. We perform semantic checking when creating the definition, and
this isn't needed in certain contexts (value initialization) but is in others
(default initialization). This fixes PR7948.
We add explicit code to the default initialization path to ensure the
definition is both present and valid.
Doug, please review. I think this follows your latest suggestion, and it ended
up remarkably cleaner than I anticipated. Also let me know if similar logic
should be followed for destructors and copy-constructors.
llvm-svn: 111802
- move DeclSpec &c into the Sema library
- move ParseAST into the Parse library
Reflect this change in a thousand different includes.
Reflect this change in the link orders.
llvm-svn: 111667
an lvalue of another, compatible Objective-C object type (e.g., a
subclass). Introduce a new initialization sequence step kind to
describe this binding, along with a new cast kind. Fixes PR7741.
llvm-svn: 110513
This takes some trickery since CastExpr has subclasses (and indeed,
is abstract).
Also, smoosh the CastKind into the bitfield from Expr.
Drops two words of storage from Expr in the common case of expressions
which don't need inheritance paths. Avoids a separate allocation and
another word of overhead in cases needing inheritance paths. Also has
the advantage of not leaking memory, since destructors for AST nodes are
never run.
llvm-svn: 110507
(e.g., a call, cast, etc.), immediately adjust the expression's type
to strip cv-qualifiers off of all non-class types (in C++) or all
types (in C). This effectively extends my previous fix for PR7463,
which was restricted to calls, to other kinds of expressions within
similar characteristics. I've audited every use of
getNonReferenceType() in the code base, switching to the newly-renamed
getNonLValueExprType() where necessary.
Big thanks to Eli for pointing out just how incomplete my original fix
for PR7463 actually was. We've been handling cv-qualifiers on rvalues
wrong for a very, very long time. Fixes PR7463.
llvm-svn: 108253
strip cv-qualifiers from the expression's type when the language calls
for it: in C, that's all the time, while C++ only does it for
non-class types.
Centralized the computation of the call expression type in
QualType::getCallResultType() and some helper functions in other nodes
(FunctionDecl, ObjCMethodDecl, FunctionType), and updated all relevant
callers of getResultType() to getCallResultType().
Fixes PR7598 and PR7463, along with a bunch of getResultType() call
sites that weren't stripping references off the result type (nothing
stripped cv-qualifiers properly before this change).
llvm-svn: 108234
CXXConstructExpr/CXXTemporaryObjectExpr/CXXNewExpr as
appropriate. Fixes PR7556, and provides a slide codegen improvement
when copy-initializing a POD class type from a value-initialized
temporary. Previously, we weren't eliding the copy.
llvm-svn: 107827
capture failures when we try to initialize an incomplete
type. Previously, we would (ab)use FK_ConversionFailed, then
occasionally dereference a null pointer when trying to diagnose the
failure. Fixes <rdar://problem/7959007>.
llvm-svn: 104286
ObjCObjectType, which is basically just a pair of
one of {primitive-id, primitive-Class, user-defined @class}
with
a list of protocols.
An ObjCObjectPointerType is therefore just a pointer which always points to
one of these types (possibly sugared). ObjCInterfaceType is now just a kind
of ObjCObjectType which happens to not carry any protocols.
Alter a rather large number of use sites to use ObjCObjectType instead of
ObjCInterfaceType. Store an ObjCInterfaceType as a pointer on the decl rather
than hashing them in a FoldingSet. Remove some number of methods that are no
longer used, at least after this patch.
By simplifying ObjCObjectPointerType, we are now able to easily remove and apply
pointers to Objective-C types, which is crucial for a certain kind of ObjC++
metaprogramming common in WebKit.
llvm-svn: 103870
"return" statement and mark the corresponding CXXConstructExpr as
elidable. Teach CodeGen that eliding a temporary is different from
eliding an object construction.
This is just a baby step toward NRVO.
llvm-svn: 103849
"used" (e.g., we will refer to the vtable in the generated code) and
when they are defined (i.e., because we've seen the key function
definition). Previously, we were effectively tracking "potential
definitions" rather than uses, so we were a bit too eager about emitting
vtables for classes without key functions.
The new scheme:
- For every use of a vtable, Sema calls MarkVTableUsed() to indicate
the use. For example, this occurs when calling a virtual member
function of the class, defining a constructor of that class type,
dynamic_cast'ing from that type to a derived class, casting
to/through a virtual base class, etc.
- For every definition of a vtable, Sema calls MarkVTableUsed() to
indicate the definition. This happens at the end of the translation
unit for classes whose key function has been defined (so we can
delay computation of the key function; see PR6564), and will also
occur with explicit template instantiation definitions.
- For every vtable defined/used, we mark all of the virtual member
functions of that vtable as defined/used, unless we know that the key
function is in another translation unit. This instantiates virtual
member functions when needed.
- At the end of the translation unit, Sema tells CodeGen (via the
ASTConsumer) which vtables must be defined (CodeGen will define
them) and which may be used (for which CodeGen will define the
vtables lazily).
From a language perspective, both the old and the new schemes are
permissible: we're allowed to instantiate virtual member functions
whenever we want per the standard. However, all other C++ compilers
were more lazy than we were, and our eagerness was both a performance
issue (we instantiated too much) and a portability problem (we broke
Boost test cases, which now pass).
Notes:
(1) There's a ton of churn in the tests, because the order in which
vtables get emitted to IR has changed. I've tried to isolate some of
the larger tests from these issues.
(2) Some diagnostics related to
implicitly-instantiated/implicitly-defined virtual member functions
have moved to the point of first use/definition. It's better this
way.
(3) I could use a review of the places where we MarkVTableUsed, to
see if I missed any place where the language effectively requires a
vtable.
Fixes PR7114 and PR6564.
llvm-svn: 103718
ensure that we complete the type when we need to look at constructors
during reference binding.
When determining whether the two types involved in reference binding
are reference-compatible, reference-related, etc., do not complete the
type of the reference itself because it is not necessary to determine
well-formedness of the program. Complete the type that we are binding
to, since that can affect whether we know about a derived-to-base
conversion.
Re-fixes PR7080.
llvm-svn: 103283
(which is ill-formed) with an initializer list. Also, change the
fallback from an assertion to a generic error message, which is far
friendlier. Fixes <rdar://problem/7730948>.
llvm-svn: 102930
keep track of whether we need to zero-initialize storage prior to
calling its constructor. Previously, we were only tracking this when
implicitly constructing the object (a CXXConstructExpr).
Fixes Boost's value-initialization tests, which means that the
Boost.Config library now passes all of its tests.
llvm-svn: 102461
thing. Audit all uses of Type::isStructure(), changing those calls to
isStructureOrClassType() as needed (which is alsmost
everywhere). Fixes the remaining failure in Boost.Utility/Swap.
llvm-svn: 102386
temporary needs to be bound, bind the copy object. Otherwise, we won't
end up calling the destructor for the copy. Fixes Boost.Optional.
llvm-svn: 102290
that the type we're copying is complete.
Boost.Regex now builds, although it's failing its regression tests
with our favorite "Sema doesn't consider destructor as used."
assertion.
llvm-svn: 102271
copy constructor, suppress user-defined conversions on the
argument. Otherwise, we can end up in a recursion loop where the
bind the argument of the copy constructor to another copy constructor call,
whose argument is then a copy constructor call...
Found by Boost.Regex which, alas, still isn't building.
llvm-svn: 102269
