#include "macrodriver.h"
#include "System.h"
#include "Port.h"
#include "Timer.h"
#include "SW_I2C.h"            // jhl
#include "user_define.h"        // jhl
#include "demo.h"               // jhl

/******************************************************************************
  デバッグがさびしいので、デモ。
 ******************************************************************************/
void demos(){
//  demo_pwr_led_0_inv_dim();
//  demo_dcp_0_trig();             // こいつは1ms位掛かる
}

#if 0
/******************************************************************************
  DCP 三角波を出し続けるデモ
 ******************************************************************************/
static void demo_dcp_0_trig(){
  static unsigned char i,j;
  static char direction = 0;
  if( ++i == 100 ){
    i = 0;
    if( direction == 0 ){
      if( dcp_inc_vol() != 0 ){
        direction = 1;
      }
    }else{
      if( dcp_dec_vol() != 0 ){
        direction = 0;
      }
    }
  }
}
#endif


/******************************************************************************
  動作確認用LEDデモ
 ******************************************************************************/
static void demo_pwr_led_0_inv_dim(){
  static unsigned char i,j;
  if( i++ == 9 ){
    i = 0;
    if( ++j == 100 ){
      j = 0;
    }
//    TMH0_ChangeDuty( j );
//    TMH1_ChangeDuty( 100 - j );
  }
}



/*****************************************************************************
　デバッグタスク
　フラッシュ耐久試験など
  意味なかった
 ****************************************************************************/
void tsk_eep_test(){
#ifdef _eep_test_
  static u8 flash_status[17];
  static u8 count_H = 0;
  static u8 count_M = 0;
  static u8 count_L = 0;
  static u8 count_BC_H = 0;
  static u8 count_BC_L = 0;

  flash_enable();
  flash_status[ 15 ] = flash_write( DAT_BL_BRIGHT, &count_L );
  if( flash_status[ 15 ] == 0x00 ){ // 正常書き込み正常終了
    if( ++count_L == 100 ){
      count_L = 0;
      if( ++count_M == 100 ){
        count_M = 0;
        if( ++count_H == 100 ){
          count_H = 0;
        }
      }
    }
  }
  if( ( flash_status[15] == 0xF5 ) // ブロックデータフル
      || ( flash_status[15] == 0xF6 ) // 書き込みエラー
      || ( flash_status[15] == 0xFA ) ){ // 有効ブロックなし
    flash_status[6] = flash_erase();
    flash_status[14] = flash_block_change();
    if( flash_status[14] == 0 ){
      if( ++count_BC_L == 100 ){
        count_BC_L = 0;
        ++count_BC_H;
      }
      flash_status[7] = count_BC_H;
      flash_status[8] = count_BC_L;
    }else{
      flash_status[5] = flash_status[14];
    }
  }
  flash_disable();

  if( ( flash_status[15] != 0x00 )
      && ( flash_status[15] != 0xF5 ) ){
    flash_status[4] = flash_status[15];
  }
    
  flash_status[ 0 ] = count_H;
  flash_status[ 1 ] = count_M;
  flash_status[ 2 ] = count_L;
  
  flash_status[ 3 ] = self_free_space();

  flash_status[ 9 ] = 0;
  
  iic2m_write_nmem( IIC_SLV_ADDR_MONITOR, 0x5A, flash_status, 9 );
#endif
}