; 78K0R C Compiler V2.10 Assembler Source        Date:13 Jun 2010 Time:19:31:25

; Command   : -c9F0104 -yC:\Program Files\NEC Electronics Tools\DEV -_msgoff -i
;             renge -iC:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\
;             V1.20\inc78k0r -ms -qvjl3wt -sainter_asm -zp -no task_sys.c
; In-file   : task_sys.c
; Asm-file  : inter_asm\task_sys.asm
; Para-file : 

$PROCESSOR(9F0104)
$DEBUG
$NODEBUGA
$KANJICODE SJIS
$TOL_INF	03FH, 0210H, 02H, 00H, 00H, 00H, 00H

$DGS	FIL_NAM, .file,		0C7H,	0FFFEH,	03FH,	067H,	01H,	00H
$DGS	AUX_FIL, task_sys.c
$DGS	MOD_NAM, task_sys,	00H,	0FFFEH,	00H,	077H,	00H,	00H
$DGS	SEC_NAM, @@BITS,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@CNST,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@R_INIT,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@INIT,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@DATA,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@R_INIS,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@INIS,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@DATS,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@CNSTL,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@RLINIT,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@INITL,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@DATAL,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@CALT,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, ROM_CODE,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@CODEL,	U,	U,	00H,	078H,	00H,	00H
$DGS	SEC_NAM, @@BASE,	U,	U,	00H,	078H,	00H,	00H
$DGS	ENM_TAG, _pwr_state_,	00H,	0FFFEH,	0AH,	0FH,	01H,	00H
$DGS	AUX_TAG, 01H,		01EH
$DGS	MEB_ENM, _OFF_TRIG,	00H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _OFF,		01H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _ON_TRIG,	02H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _ON,		03H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _SLEEP_TRIG,	04H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _SLEEP,	05H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _BT_CHARGE,	06H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	END_STR, .eos,		01H,	0FFFFH,	00H,	066H,	01H,	00H
$DGS	AUX_EOS, 013H,		01H
$DGS	ENM_TAG, _poweron_reason_,	00H,	0FFFEH,	0AH,	0FH,	01H,	00H
$DGS	AUX_TAG, 01H,		025H
$DGS	MEB_ENM, _NONE,		00H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _PWSW,		01H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _RTC_ALARM,	02H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	END_STR, .eos,		01H,	0FFFFH,	00H,	066H,	01H,	00H
$DGS	AUX_EOS, 01EH,		01H
$DGS	ENM_TAG, _model_,	00H,	0FFFEH,	0AH,	0FH,	01H,	00H
$DGS	AUX_TAG, 01H,		02FH
$DGS	MEB_ENM, _MODEL_JIKKI,	00H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _MODEL_TS_BOARD,	01H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _MODEL_SHIROBAKO,	02H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _MODEL_RESERVED1,	03H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _MODEL_RESERVED2,	04H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _MODEL_RESERVED3,	05H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	END_STR, .eos,		01H,	0FFFFH,	00H,	066H,	01H,	00H
$DGS	AUX_EOS, 025H,		01H
$DGS	STR_STR, .0fake,	00H,	0FFFEH,	08H,	0AH,	01H,	00H
$DGS	AUX_TAG, 04H,		041H
$DGS	MEB_STR, _pwr_state,	00H,	0FFFFH,	0AH,	08H,	01H,	00H
$DGS	AUX_STR, 013H,		00H,	01H,	00H,	00H,	00H,	00H,	00H
$DGS	MEB_STR, _poweron_reason,	01H,	0FFFFH,	0AH,	08H,	01H,	00H
$DGS	AUX_STR, 01EH,		00H,	01H,	00H,	00H,	00H,	00H,	00H
$DGS	BIT_FLD, _dipsw0,	010H,	0FFFFH,	0CH,	012H,	01H,	00H
$DGS	AUX_BIT, 00H,		01H
$DGS	BIT_FLD, _dipsw1,	011H,	0FFFFH,	0CH,	012H,	01H,	00H
$DGS	AUX_BIT, 00H,		01H
$DGS	BIT_FLD, _dipsw2,	012H,	0FFFFH,	0CH,	012H,	01H,	00H
$DGS	AUX_BIT, 00H,		01H
$DGS	BIT_FLD, _reboot,	013H,	0FFFFH,	0CH,	012H,	01H,	00H
$DGS	AUX_BIT, 00H,		01H
$DGS	MEB_STR, _model,	03H,	0FFFFH,	0AH,	08H,	01H,	00H
$DGS	AUX_STR, 025H,		00H,	01H,	00H,	00H,	00H,	00H,	00H
$DGS	END_STR, .eos,		04H,	0FFFFH,	00H,	066H,	01H,	00H
$DGS	AUX_EOS, 02FH,		04H
$DGS	ENM_TAG, .2fake,	00H,	0FFFEH,	0AH,	0FH,	01H,	00H
$DGS	AUX_TAG, 01H,		047H
$DGS	MEB_ENM, _ERR_FINISED,	00H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	MEB_ENM, _ERR_CONTINUE,	01H,	0FFFFH,	04H,	010H,	00H,	00H
$DGS	END_STR, .eos,		01H,	0FFFFH,	00H,	066H,	01H,	00H
$DGS	AUX_EOS, 041H,		01H
$DGS	LAB_SYM, bs_F0057,	U,	U,	00H,	06H,	00H,	00H
$DGS	LAB_SYM, es_F0057,	U,	U,	00H,	06H,	00H,	00H
$DGS	STA_SYM, _lpf_coeff,	U,	U,	05002H,	03H,	01H,	03H
$DGS	AUX_STR, 00H,		00H,	02FH,	02FH,	00H,	00H,	00H,	00H
$DGS	GLV_SYM, _tsk_sys,	U,	U,	01H,	026H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	0A6H,	00H,	00H
$DGS	BEG_FUN, ??bf_tsk_sys,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_BEG, 023H,		00H,	050H
$DGS	STA_SYM, _timeout,	?L0003,	U,	0CH,	03H,	00H,	00H
$DGS	BEG_BLK, ??bb00_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 05H,		00H,	052H
$DGS	BEG_BLK, ??bb01_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0BH,		00H,	054H
$DGS	BEG_BLK, ??bb02_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 010H,		00H,	058H
$DGS	END_BLK, ??eb02_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 012H
$DGS	BEG_BLK, ??bb03_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 014H,		00H,	05CH
$DGS	END_BLK, ??eb03_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 016H
$DGS	BEG_BLK, ??bb04_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 018H,		00H,	060H
$DGS	END_BLK, ??eb04_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 01CH
$DGS	BEG_BLK, ??bb05_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 01FH,		00H,	066H
$DGS	END_BLK, ??eb05_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 022H
$DGS	END_BLK, ??eb01_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 029H
$DGS	BEG_BLK, ??bb06_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 034H,		00H,	06AH
$DGS	END_BLK, ??eb06_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 039H
$DGS	BEG_BLK, ??bb07_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 048H,		00H,	06EH
$DGS	END_BLK, ??eb07_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 04BH
$DGS	BEG_BLK, ??bb08_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 04DH,		00H,	072H
$DGS	END_BLK, ??eb08_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 051H
$DGS	BEG_BLK, ??bb09_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 065H,		00H,	076H
$DGS	END_BLK, ??eb09_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 067H
$DGS	BEG_BLK, ??bb0A_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 069H,		00H,	07AH
$DGS	END_BLK, ??eb0A_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 069H
$DGS	BEG_BLK, ??bb0B_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 084H,		00H,	07EH
$DGS	END_BLK, ??eb0B_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 087H
$DGS	BEG_BLK, ??bb0C_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 092H,		00H,	082H
$DGS	END_BLK, ??eb0C_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0A1H
$DGS	BEG_BLK, ??bb0D_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0A9H,		00H,	086H
$DGS	END_BLK, ??eb0D_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0ABH
$DGS	BEG_BLK, ??bb0E_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0B1H,		00H,	08AH
$DGS	END_BLK, ??eb0E_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0B1H
$DGS	BEG_BLK, ??bb0F_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0C4H,		00H,	08EH
$DGS	END_BLK, ??eb0F_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0C7H
$DGS	BEG_BLK, ??bb10_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0DEH,		00H,	090H
$DGS	BEG_BLK, ??bb11_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0E5H,		00H,	096H
$DGS	END_BLK, ??eb11_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0EAH
$DGS	END_BLK, ??eb10_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0ECH
$DGS	BEG_BLK, ??bb12_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0EEH,		00H,	098H
$DGS	BEG_BLK, ??bb13_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0F2H,		00H,	09EH
$DGS	END_BLK, ??eb13_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0F2H
$DGS	END_BLK, ??eb12_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0110H
$DGS	BEG_BLK, ??bb14_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0114H,		00H,	00H
$DGS	END_BLK, ??eb14_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0117H
$DGS	END_BLK, ??eb00_tsk_sys,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0119H
$DGS	END_FUN, ??ef_tsk_sys,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_END, 011AH
$DGS	STA_SYM, _chk_emergencyExit,	U,	U,	01H,	03H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	0C1H,	00H,	00H
$DGS	BEG_FUN, ??bf_chk_emergencyExit,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_BEG, 0143H,		00H,	0ABH
$DGS	STA_SYM, _state,	?L0048,	U,	04H,	03H,	00H,	00H
$DGS	BEG_BLK, ??bb00_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 06H,		00H,	0ADH
$DGS	BEG_BLK, ??bb01_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 08H,		00H,	0B1H
$DGS	END_BLK, ??eb01_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 0CH
$DGS	BEG_BLK, ??bb02_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 0EH,		00H,	0B3H
$DGS	BEG_BLK, ??bb03_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 010H,		00H,	0BBH
$DGS	END_BLK, ??eb03_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 017H
$DGS	END_BLK, ??eb02_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 018H
$DGS	END_BLK, ??eb00_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 019H
$DGS	BEG_BLK, ??bb04_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_BEG, 01BH,		00H,	00H
$DGS	END_BLK, ??eb04_chk_emergencyExit,	U,	U,	00H,	064H,	01H,	00H
$DGS	AUX_END, 01DH
$DGS	END_FUN, ??ef_chk_emergencyExit,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_END, 01FH
$DGS	GLV_SYM, _tski_firm_update,	U,	U,	0AH,	026H,	01H,	02H
$DGS	AUX_FUN, 041H,		U,	U,	0C7H,	00H,	00H
$DGS	BEG_FUN, ??bf_tski_firm_update,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_BEG, 0181H,		00H,	0C7H
$DGS	END_FUN, ??ef_tski_firm_update,	U,	U,	00H,	065H,	01H,	00H
$DGS	AUX_END, 04H
$DGS	GLV_SYM, _iic_mcu_write_a_byte,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _system_status,	U,	U,	08H,	02H,	01H,	00H
$DGS	AUX_STR, 02FH,		00H,	04H,	00H,	00H,	00H,	00H,	00H
$DGS	GLV_SYM, _SW_pow_count,	U,	U,	0CH,	02H,	00H,	00H
$DGS	GLV_SYM, _renge_task_interval_run_force,	U,	U,	034CH,	02H,	00H,	00H
$DGS	GLV_SYM, _iic_mcu_start,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _PM_init,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _PM_sys_pow_on,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _iic_mcu_stop,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _PM_LCD_vcom_set,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _vreg_ctr,	U,	U,	0CH,	02H,	01H,	03H
$DGS	AUX_STR, 00H,		00H,	01H,	01H,	00H,	00H,	00H,	00H
$DGS	GLV_SYM, _LED_init,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _IIC_ctr_Init,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _set_irq,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _IIC_twl_Init,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _wait_ms,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _LED_stop,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _IIC_ctr_Stop,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _IIC_twl_Stop,	U,	U,	01H,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _PM_sys_pow_off,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _SW_wifi_count,	U,	U,	0CH,	02H,	00H,	00H
$DGS	GLV_SYM, _iic_mcu_read_a_byte,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _do_command0,	U,	U,	0AH,	02H,	01H,	02H
$DGS	AUX_FUN, 041H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _renge_task_immed_add,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H
$DGS	GLV_SYM, _firm_update,	U,	U,	0CH,	02H,	01H,	02H
$DGS	AUX_FUN, 00H,		U,	U,	00H,	00H,	00H

	EXTRN	_iic_mcu_write_a_byte
	EXTRN	_system_status
	EXTRN	_SW_pow_count
	EXTRN	_iic_mcu_start
	EXTRN	_PM_init
	EXTRN	_PM_sys_pow_on
	EXTRN	_iic_mcu_stop
	EXTRN	_PM_LCD_vcom_set
	EXTRN	_vreg_ctr
	EXTRN	_LED_init
	EXTRN	_IIC_ctr_Init
	EXTRN	_set_irq
	EXTRN	_IIC_twl_Init
	EXTRN	_wait_ms
	EXTRN	_LED_stop
	EXTRN	_IIC_ctr_Stop
	EXTRN	_IIC_twl_Stop
	EXTRN	_PM_sys_pow_off
	EXTRN	_SW_wifi_count
	EXTRN	_iic_mcu_read_a_byte
	EXTRN	_do_command0
	EXTRN	_renge_task_immed_add
	EXTRN	_firm_update
	EXTBIT	_renge_task_interval_run_force
	PUBLIC	_tsk_sys
	PUBLIC	_tski_firm_update

@@BITS	BSEG

@@CNST	CSEG	MIRRORP
_lpf_coeff:	DB	01H	; 1
	DB	02H	; 2
	DB	02H	; 2
	DB	03H	; 3
	DB	03H	; 3
	DB	02H	; 2
	DB	00H	; 0
	DB	0FEH	; 254
	DB	0FBH	; 251
	DB	0F7H	; 247
	DB	0F3H	; 243
	DB	0F0H	; 240
	DB	0F0H	; 240
	DB	0F3H	; 243
	DB	0FAH	; 250
	DB	04H	; 4
	DB	012H	; 18
	DB	025H	; 37
	DB	038H	; 56
	DB	04DH	; 77
	DB	05FH	; 95
	DB	06EH	; 110
	DB	077H	; 119
	DB	07AH	; 122
	DB	077H	; 119
	DB	06EH	; 110
	DB	05FH	; 95
	DB	04DH	; 77
	DB	038H	; 56
	DB	025H	; 37
	DB	012H	; 18
	DB	04H	; 4
	DB	0FAH	; 250
	DB	0F3H	; 243
	DB	0F0H	; 240
	DB	0F0H	; 240
	DB	0F3H	; 243
	DB	0F7H	; 247
	DB	0FBH	; 251
	DB	0FEH	; 254
	DB	00H	; 0
	DB	02H	; 2
	DB	03H	; 3
	DB	03H	; 3
	DB	02H	; 2
	DB	02H	; 2
	DB	01H	; 1
	DB	(1)

@@R_INIT	CSEG	UNIT64KP
	DB	00H	; 0
	DB	(1)

@@INIT	DSEG	BASEP
?L0003:	DS	(1)
	DS	(1)

@@DATA	DSEG	BASEP
?L0048:	DS	(2)

@@R_INIS	CSEG	UNIT64KP

@@INIS	DSEG	SADDRP

@@DATS	DSEG	SADDRP

@@CNSTL	CSEG	PAGE64KP

@@RLINIT	CSEG	UNIT64KP

@@INITL	DSEG	UNIT64KP

@@DATAL	DSEG	UNIT64KP

@@CALT	CSEG	CALLT0

; Sub-Routines created by CC78K0R

ROM_CODE	CSEG	BASE
bs_F0057:
	push	ax						;[INF] 1, 1
	mov	x,#05H	; 5 					;[INF] 2, 1
	push	ax						;[INF] 1, 1
	mov	x,#084H	; 132 					;[INF] 2, 1
	call	!_iic_mcu_write_a_byte				;[INF] 3, 3
	addw	sp,#04H	; 4 					;[INF] 2, 1
	ret							;[INF] 1, 6
es_F0057:

; *** Sub-Routine Information ***
;
; $SUB bs_F0057
;      CODE SIZE= 12 bytes

; End of Sub-Routines

; line     1 : #pragma SFR
; line     2 : #pragma NOP
; line     3 : #pragma HALT
; line     4 : #pragma STOP
; line     5 : 
; line     6 : #include "incs.h"
; line     7 : 
; line     8 : #include "i2c_twl.h"
; line     9 : #include "i2c_ctr.h"
; line    10 : #include "led.h"
; line    11 : #include "accero.h"
; line    12 : #include "pm.h"
; line    13 : #include "rtc.h"
; line    14 : #include "sw.h"
; line    15 : #include "adc.h"
; line    16 : 
; line    17 : 
; line    18 : 
; line    19 : //=========================================================
; line    20 : static void chk_emergencyExit();
; line    21 : 
; line    22 : 
; line    23 : 
; line    24 : //=========================================================
; line    25 : 
; line    26 : 
; line    27 : 
; line    28 : /* ========================================================
; line    29 :  マイコン内部で必要なもの
; line    30 : ・省電力に入れる
; line    31 :   　system_status.pwr_state == OFF_TRIG で、このタスクが呼ばれる
;              と、
; line    32 :   省電力モードに入ります
; line    33 :  ======================================================== */
; line    34 : void tsk_sys(  )
; line    35 : {

ROM_CODE	CSEG	BASE
_tsk_sys:
$DGL	1,75
??bf_tsk_sys:
; line    36 :     static u8 timeout = 0;
; line    37 : 
; line    38 :     switch ( system_status.pwr_state )
$DGL	0,4
	mov	a,!_system_status				;[INF] 3, 1
	sarw	ax,8						;[INF] 2, 1
	onew	bc						;[INF] 1, 1
	subw	ax,#00H	; 0 					;[INF] 3, 1
	sknz							;[INF] 2, 1
	br	!?L0010						;[INF] 3, 3
	subw	ax,bc						;[INF] 1, 1
	bz	$?L0005						;[INF] 2, 4
	subw	ax,bc						;[INF] 1, 1
	bz	$?L0006						;[INF] 2, 4
	subw	ax,bc						;[INF] 1, 1
	sknz							;[INF] 2, 1
	br	!?L0007						;[INF] 3, 3
	subw	ax,bc						;[INF] 1, 1
	sknz							;[INF] 2, 1
	br	!?L0008						;[INF] 3, 3
	subw	ax,bc						;[INF] 1, 1
	sknz							;[INF] 2, 1
	br	!?L0009						;[INF] 3, 3
	subw	ax,bc						;[INF] 1, 1
	sknz							;[INF] 2, 1
	br	!?L0011						;[INF] 3, 3
	br	!?L0038						;[INF] 3, 3
; line    39 :     {
??bb00_tsk_sys:
; line    40 :     case OFF:                  //-------------------------------
;              ------------------------
?L0005:
; line    41 :         // スイッチ操作などで割り込みが発生し、スリープが解除され
;              るとここに来ます。
; line    42 : 
; line    43 : #ifndef _PARRADIUM_
; line    44 :         switch ( system_status.poweron_reason )
$DGL	0,10
	mov	a,!_system_status+1				;[INF] 3, 1
	sarw	ax,8						;[INF] 2, 1
	subw	ax,#02H	; 2 					;[INF] 3, 1
	bz	$?L0015						;[INF] 2, 4
; line    45 :         {
??bb01_tsk_sys:
; line    46 :         default:
; line    47 :             // スイッチで電源on
; line    48 : 
; line    49 :             if( SW_pow_count != 0 )
$DGL	0,15
	cmp0	!_SW_pow_count					;[INF] 3, 1
	bz	$?L0018						;[INF] 2, 4
; line    50 :             {
??bb02_tsk_sys:
; line    51 :                 timeout = 0;
$DGL	0,17
	clrb	!?L0003	; timeout 				;[INF] 3, 1
??eb02_tsk_sys:
; line    52 :             }
$DGL	0,18
	br	$?L0019						;[INF] 2, 3
?L0018:
; line    53 :             else
; line    54 :             {
??bb03_tsk_sys:
; line    55 :                 timeout += 1;
$DGL	0,21
	inc	!?L0003	; timeout 				;[INF] 3, 2
??eb03_tsk_sys:
; line    56 :             }
?L0019:
; line    57 :             if( timeout > 127 )
$DGL	0,23
	mov	a,!?L0003	; timeout 			;[INF] 3, 1
	addw	ax,ax						;[INF] 1, 1
	bnc	$?L0020						;[INF] 2, 4
; line    58 :             {
??bb04_tsk_sys:
; line    59 :                 system_status.pwr_state = OFF_TRIG;     // スイッ
;              チはノイズだった。寝る。
$DGL	0,25
	clrb	!_system_status					;[INF] 3, 1
; line    60 :                 renge_task_interval_run_force = 1;
$DGL	0,26
	set1	_renge_task_interval_run_force			;[INF] 3, 2
; line    61 :                 return;
$DGL	0,27
	ret							;[INF] 1, 6
??eb04_tsk_sys:
; line    62 :             }
?L0020:
; line    63 : 
; line    64 :             if( SW_pow_count < 3 )
$DGL	0,30
	cmp	!_SW_pow_count,#03H	; 3 			;[INF] 4, 1
	sknc							;[INF] 2, 1
	br	!?L0004						;[INF] 3, 3
; line    65 :             {
??bb05_tsk_sys:
; line    66 :                 // もう少しスイッチの様子を見る
; line    67 :                 return;
??eb05_tsk_sys:
; line    68 :             }
; line    69 :             // 電源投入
; line    70 :             system_status.poweron_reason = PWSW;
$DGL	0,36
	oneb	!_system_status+1				;[INF] 3, 1
; line    71 :             break;
; line    72 : 
; line    73 :         case ( RTC_ALARM ):
; line    74 :             break;
??eb01_tsk_sys:
; line    75 :         }
?L0015:
; line    76 : 
; line    77 :         timeout = 0;
$DGL	0,43
	clrb	!?L0003	; timeout 				;[INF] 3, 1
; line    78 : 
; line    79 :         // 電源投入 //
; line    80 :         iic_mcu_start(  );
$DGL	0,46
	call	!_iic_mcu_start					;[INF] 3, 3
; line    81 : 
; line    82 :         // ↓で電池残量ICの起動待ちウェイトなどがあります。
; line    83 :         PM_init(  );            // 電池残量ICの設定
$DGL	0,49
	call	!_PM_init					;[INF] 3, 3
; line    84 : 
; line    85 :         if( PM_sys_pow_on(  ) != ERR_SUCCESS )
$DGL	0,51
	call	!_PM_sys_pow_on					;[INF] 3, 3
	cmp0	c						;[INF] 1, 1
	bz	$?L0024						;[INF] 2, 4
; line    86 :         {                       // 電源起動不可エラー
??bb06_tsk_sys:
; line    87 :             renge_task_interval_run_force = 1;
$DGL	0,53
	set1	_renge_task_interval_run_force			;[INF] 3, 2
; line    88 :             iic_mcu_stop(  );
$DGL	0,54
	call	!_iic_mcu_stop					;[INF] 3, 3
; line    89 :             system_status.pwr_state = OFF_TRIG;
$DGL	0,55
	clrb	!_system_status					;[INF] 3, 1
; line    90 :             return;
$DGL	0,56
	ret							;[INF] 1, 6
??eb06_tsk_sys:
; line    91 :         }
?L0024:
; line    92 :         PM_CHG_TIMEOUT_ENABLE();
; line    93 : //        IRQ0_active;
; line    94 : 
; line    95 : #else
; line    96 :         vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_GASGAUGE_ERR;
; line    97 :         system_status.poweron_reason = PWSW;
; line    98 : #endif // _PARADDIUM_
; line    99 : 
; line   100 :         PM_LCD_vcom_set(  );    // LCDの対向電圧値など書き込み
$DGL	0,66
	call	!_PM_LCD_vcom_set				;[INF] 3, 3
; line   101 : #ifdef _PMIC_TWL_
; line   102 :         PM_TEG_LCD_dis( 0 );
; line   103 : #endif
; line   104 : 
; line   105 :         if( system_status.poweron_reason == PWSW )
$DGL	0,71
	cmp	!_system_status+1,#01H	; 1 			;[INF] 4, 1
	bnz	$?L0026						;[INF] 2, 4
; line   106 :         {
??bb07_tsk_sys:
; line   107 :             // 電源ボタンでのonの時は、LEDを点灯させる
; line   108 :             vreg_ctr[VREG_C_LED_POW] = LED_POW_ILM_AUTO;
$DGL	0,74
	clrb	!_vreg_ctr+41					;[INF] 3, 1
??eb07_tsk_sys:
; line   109 :         }
$DGL	0,75
	br	$?L0027						;[INF] 2, 3
?L0026:
; line   110 :         else
; line   111 :         {
??bb08_tsk_sys:
; line   112 :             // とりあえず、LED消灯状態で起動させる
; line   113 :             vreg_ctr[VREG_C_LED_POW] = LED_POW_ILM_OFF;
$DGL	0,79
	mov	!_vreg_ctr+41,#03H	; 3 			;[INF] 4, 1
??eb08_tsk_sys:
; line   114 :             // todo?
; line   115 :         }
?L0027:
; line   116 :         system_status.pwr_state = ON_TRIG;
$DGL	0,82
	mov	!_system_status,#02H	; 2 			;[INF] 4, 1
; line   117 :         // ここまで来ると、電源投入確定
; line   118 :         break;
$DGL	0,84
	ret							;[INF] 1, 6
; line   119 : 
; line   120 :     case ON_TRIG:              //-------------------------------
;              ------------------------
?L0006:
; line   121 : 
; line   122 :         LED_init(  );
$DGL	0,88
	call	!_LED_init					;[INF] 3, 3
; line   123 : 
; line   124 :         PU7 = 0b00011101;  // 4:SW_WIFI 3:SW_PWSW 2:PM_IRQ 0:PM_
;              EXTDC_n
$DGL	0,90
	mov	!PU7,#01DH	; 29 				;[INF] 4, 1
; line   125 : 
; line   126 :         IIC_ctr_Init(  );
$DGL	0,92
	call	!_IIC_ctr_Init					;[INF] 3, 3
; line   127 :         if( ( vreg_ctr[ VREG_C_MCU_STATUS ] & REG_BIT_STATUS_WDT
;              _RESET )
; line   128 : /*
; line   129 :         if( vreg_ctr[ VREG_C_IRQ0 ]
; line   130 :            | vreg_ctr[ VREG_C_IRQ0 ]
; line   131 :            | vreg_ctr[ VREG_C_IRQ0 ]
; line   132 :            | vreg_ctr[ VREG_C_IRQ0 ]
; line   133 : */
; line   134 :             != 0 )
$DGL	0,100
	mov	a,!_vreg_ctr+2					;[INF] 3, 1
	and	a,#02H	; 2 					;[INF] 2, 1
	cmp0	a						;[INF] 1, 1
	bz	$?L0028						;[INF] 2, 4
; line   135 :             {
??bb09_tsk_sys:
; line   136 :                 set_irq( VREG_C_IRQ0, REG_BIT_IRQ_WDT_RESET );
$DGL	0,102
	movw	ax,#080H	; 128 				;[INF] 3, 1
	push	ax						;[INF] 1, 1
	mov	x,#010H	; 16 					;[INF] 2, 1
	call	!_set_irq					;[INF] 3, 3
	pop	ax						;[INF] 1, 1
??eb09_tsk_sys:
; line   137 :             }
?L0028:
; line   138 :         IIC_twl_Init(  );
$DGL	0,104
	call	!_IIC_twl_Init					;[INF] 3, 3
; line   139 :         RTC_32k_on(  );
$DGL	0,105
??bb0A_tsk_sys:
	set1	RTCC0.4						;[INF] 3, 2
??eb0A_tsk_sys:
; line   140 : 
; line   141 :         KRM  = 0b00000000;
$DGL	0,107
	clrb	!KRM						;[INF] 3, 1
; line   142 : 
; line   143 :         system_status.poweron_reason = NONE;
$DGL	0,109
	clrb	!_system_status+1				;[INF] 3, 1
; line   144 :         renge_task_interval_run_force = 1;
$DGL	0,110
	set1	_renge_task_interval_run_force			;[INF] 3, 2
; line   145 : 
; line   146 :         MK0 = INT_MSK0_RSV;
$DGL	0,112
	movw	MK0,#0EF3FH	; -4289 			;[INF] 4, 1
; line   147 :         MK1 = INT_MSK1_RSV;
$DGL	0,113
	movw	MK1,#0F0F6H	; -3850 			;[INF] 4, 1
; line   148 : #ifdef _MCU_BSR_
; line   149 : //        MK2 = ~( INT_MSK2_IIC_TWL | INT_MSK2_WIFI_TX_BSR | INT
;              _MSK2_CODEC_PMIRQ );
; line   150 : //        PMK21 = 0;  // wifi  使わない
; line   151 :         PMK6 = 0;   // pm_irq
$DGL	0,117
	clr1	MK2L.3						;[INF] 3, 2
; line   152 : #else
; line   153 :         MK2L = ~INT_MSK2_WIFI_TX_KE3;
; line   154 : #endif
; line   155 : 
; line   156 :         system_status.reboot = 0;
$DGL	0,122
	clr1	!_system_status+2.3				;[INF] 4, 2
; line   157 :         system_status.pwr_state = ON;
$DGL	0,123
	mov	!_system_status,#03H	; 3 			;[INF] 4, 1
; line   158 :         break;
$DGL	0,124
	ret							;[INF] 1, 6
; line   159 : 
; line   160 :     case ON:                   //-------------------------------
;              --------------
?L0007:
; line   161 :         // PMICによる強制電源断チェック
; line   162 :         // デバッガがreset1をアサートすることもある。そのときは全
;              部リセット
; line   163 :         chk_emergencyExit();
$DGL	0,129
	call	!_chk_emergencyExit				;[INF] 3, 3
; line   164 : 
; line   165 :         // SLP監視
; line   166 :       if( SLP_REQ ){
$DGL	0,132
	bf	P12.0,$?L0030					;[INF] 4, 5
??bb0B_tsk_sys:
; line   167 :         system_status.pwr_state = SLEEP_TRIG;
$DGL	0,133
	mov	!_system_status,#04H	; 4 			;[INF] 4, 1
; line   168 :         renge_task_interval_run_force = 1;
$DGL	0,134
	set1	_renge_task_interval_run_force			;[INF] 3, 2
??eb0B_tsk_sys:
; line   169 :       }
?L0030:
; line   170 :         break;
$DGL	0,136
	ret							;[INF] 1, 6
; line   171 : 
; line   172 :     case SLEEP_TRIG:           //-------------------------------
;              ------
?L0008:
; line   173 :         PM_VDD_ecoMode();
$DGL	0,139
	movw	ax,#027H	; 39 				;[INF] 3, 1
	call	!bs_F0057					;[INF] 3, 3
; line   174 :         system_status.pwr_state = SLEEP;
$DGL	0,140
	mov	!_system_status,#05H	; 5 			;[INF] 4, 1
; line   175 :         break;
$DGL	0,141
	ret							;[INF] 1, 6
; line   176 : 
; line   177 :     case SLEEP:                //-------------------------------
;              -----------
?L0009:
; line   178 :         chk_emergencyExit();
$DGL	0,144
	call	!_chk_emergencyExit				;[INF] 3, 3
; line   179 :         // スリープから復帰
; line   180 :       if( !SLP_REQ ){
$DGL	0,146
	bt	P12.0,$?L0032					;[INF] 4, 5
??bb0C_tsk_sys:
; line   181 :         PM_VDD_normMode();
$DGL	0,147
	clrw	ax						;[INF] 1, 1
	call	!bs_F0057					;[INF] 3, 3
; line   182 :         wait_ms( 5 );  // tdly_sw
$DGL	0,148
	movw	ax,#05H	; 5 					;[INF] 3, 1
	call	!_wait_ms					;[INF] 3, 3
; line   183 : 
; line   184 : #ifdef _MODEL_CTR_
; line   185 :         SLP_ACK = 1;
$DGL	0,151
	set1	P7.7						;[INF] 3, 2
; line   186 :         NOP();          // 適当ウェイト
$DGL	0,152
	nop							;[INF] 1, 1
; line   187 :         NOP();
$DGL	0,153
	nop							;[INF] 1, 1
; line   188 :         NOP();
$DGL	0,154
	nop							;[INF] 1, 1
; line   189 :         NOP();
$DGL	0,155
	nop							;[INF] 1, 1
; line   190 :         SLP_ACK = 0;
$DGL	0,156
	clr1	P7.7						;[INF] 3, 2
; line   191 : #endif
; line   192 : 
; line   193 :         system_status.pwr_state = ON_TRIG;
$DGL	0,159
	mov	!_system_status,#02H	; 2 			;[INF] 4, 1
; line   194 :         renge_task_interval_run_force = 1;
$DGL	0,160
	set1	_renge_task_interval_run_force			;[INF] 3, 2
??eb0C_tsk_sys:
; line   195 :       }
?L0032:
; line   196 : 
; line   197 :         break;
$DGL	0,163
	ret							;[INF] 1, 6
; line   198 : 
; line   199 :     case OFF_TRIG:             //-------------------------------
;              --------
?L0010:
; line   200 :         // LED消灯を待つ
; line   201 :         vreg_ctr[VREG_C_LED_POW] = LED_POW_ILM_OFF;
$DGL	0,167
	mov	!_vreg_ctr+41,#03H	; 3 			;[INF] 4, 1
; line   202 :         if(( LED_duty_pow_H != 0 ) || ( LED_duty_pow_L != 0 ))
$DGL	0,168
	clrw	ax						;[INF] 1, 1
	cmpw	ax,!TDR06					;[INF] 3, 1
	bnz	$?L0036						;[INF] 2, 4
	cmpw	ax,!TDR07					;[INF] 3, 1
	skz							;[INF] 2, 1
?L0036:
; line   203 :         {
??bb0D_tsk_sys:
; line   204 :             return;
$DGL	0,170
	ret							;[INF] 1, 6
??eb0D_tsk_sys:
; line   205 :         }
?L0034:
; line   206 : 
; line   207 :         PM_CHG_TIMEOUT_ENABLE();
; line   208 :         LED_stop(  );
$DGL	0,174
	call	!_LED_stop					;[INF] 3, 3
; line   209 :         IIC_ctr_Stop(  );
$DGL	0,175
	call	!_IIC_ctr_Stop					;[INF] 3, 3
; line   210 :         IIC_twl_Stop(  );
$DGL	0,176
	call	!_IIC_twl_Stop					;[INF] 3, 3
; line   211 :         RTC_32k_off();
$DGL	0,177
??bb0E_tsk_sys:
	clr1	RTCC0.4						;[INF] 3, 2
??eb0E_tsk_sys:
; line   212 : 
; line   213 :         vreg_ctr[VREG_C_IRQ0] = 0;
$DGL	0,179
	clrb	!_vreg_ctr+16					;[INF] 3, 1
; line   214 :         vreg_ctr[VREG_C_IRQ1] = 0;
$DGL	0,180
	clrb	!_vreg_ctr+17					;[INF] 3, 1
; line   215 :         vreg_ctr[VREG_C_IRQ2] = 0;
$DGL	0,181
	clrb	!_vreg_ctr+18					;[INF] 3, 1
; line   216 :         vreg_ctr[VREG_C_IRQ3] = 0;
$DGL	0,182
	clrb	!_vreg_ctr+19					;[INF] 3, 1
; line   217 : 
; line   218 : //  電源オン条件の割り込みセット
; line   219 : // PWSW        KR3   押すとL
; line   220 : // BG24        KR4
; line   221 : // ふた開け    INTP5 閉じるとL
; line   222 : // ACアダプタ  INTP4 アダプタありでL
; line   223 : // RTC
; line   224 : 
; line   225 : #ifdef _PMIC_TWL_
; line   226 :         PM_TEG_LCD_dis( 1 );
; line   227 : #endif
; line   228 : //        IRQ0_deactive;
; line   229 :         // pullup_off(); ↓
; line   230 :         {
??bb0F_tsk_sys:
; line   231 :             PU5 = 0b00000011;  // PM_CHG,PM_CHGERR
$DGL	0,197
	mov	!PU5,#03H	; 3 				;[INF] 4, 1
; line   232 :             PU7 = 0b00011001;  // SW_WiFi,PWSWI,PM_EXTTDC
$DGL	0,198
	mov	!PU7,#019H	; 25 				;[INF] 4, 1
??eb0F_tsk_sys:
; line   233 :         }
; line   234 : 
; line   235 :         PM_sys_pow_off(  );
$DGL	0,201
	call	!_PM_sys_pow_off				;[INF] 3, 3
; line   236 : 
; line   237 :         KRM = ( KR_SW_POW );    // Mask ではなく、Modeなのだそう
;              だ。紛らわしい
$DGL	0,203
	mov	KRM,#08H	; 8 				;[INF] 3, 1
; line   238 :         // intp20系は後ほど
; line   239 :         MK0 = ~( INT_MSK0_EXTDC );
$DGL	0,205
	movw	MK0,#0FFBFH	; -65 				;[INF] 4, 1
; line   240 :         MK1 = ~( INT_MSK1_KR | INT_MSK1_RTCALARM | INT_MSK1_RTCI
;              NTVAL );
$DGL	0,206
	movw	MK1,#0F1FFH	; -3585 			;[INF] 4, 1
; line   241 :         MK2L = 0b11111111;
$DGL	0,207
	mov	MK2L,#0FFH	; 255 				;[INF] 3, 1
; line   242 : 
; line   243 :         IF0 = 0;
$DGL	0,209
	clrw	ax						;[INF] 1, 1
	movw	IF0,ax						;[INF] 2, 1
; line   244 :         IF1 = 0;
$DGL	0,210
	movw	IF1,ax						;[INF] 2, 1
; line   245 :         IF2 = 0;
$DGL	0,211
	movw	IF2,ax						;[INF] 2, 1
; line   246 : 
; line   247 :         timeout = 0;
$DGL	0,213
	clrb	!?L0003	; timeout 				;[INF] 3, 1
; line   248 : 
; line   249 :         system_status.pwr_state = BT_CHARGE;
$DGL	0,215
	mov	!_system_status,#06H	; 6 			;[INF] 4, 1
; line   250 :         SW_pow_count = 0;
$DGL	0,216
	clrb	!_SW_pow_count					;[INF] 3, 1
; line   251 :         SW_wifi_count = 0;
$DGL	0,217
	clrb	!_SW_wifi_count					;[INF] 3, 1
; line   252 :         // no break //
; line   253 : 
; line   254 :     case BT_CHARGE:
?L0011:
; line   255 :         if( !PM_EXTDC_n )
$DGL	0,221
	bt	P7.0,$?L0037					;[INF] 4, 5
; line   256 :         {
??bb10_tsk_sys:
; line   257 :             // アダプタ有り：充電温度監視
; line   258 :             BT_TEMP_P = 1;
$DGL	0,224
	set1	P1.7						;[INF] 3, 2
; line   259 : 
; line   260 :             // 電源on？
; line   261 :             if( ( SW_pow_count > 3 ) || ( SW_wifi_count > 3 )
; line   262 :                 || ( system_status.poweron_reason == RTC_ALARM )
;               )
$DGL	0,228
	cmp	!_SW_pow_count,#04H	; 4 			;[INF] 4, 1
	bnc	$?L0041						;[INF] 2, 4
	cmp	!_SW_wifi_count,#04H	; 4 			;[INF] 4, 1
	bnc	$?L0041						;[INF] 2, 4
	cmp	!_system_status+1,#02H	; 2 			;[INF] 4, 1
	bnz	$?L0004						;[INF] 2, 4
?L0041:
; line   263 :             {
??bb11_tsk_sys:
; line   264 :                 system_status.pwr_state = OFF;  // 若干抵抗有るが
;              ...
$DGL	0,230
	oneb	!_system_status					;[INF] 3, 1
; line   265 :                 renge_task_interval_run_force = 1;
$DGL	0,231
	set1	_renge_task_interval_run_force			;[INF] 3, 2
; line   266 :                 KRMK = 1;
$DGL	0,232
	set1	MK1H.3						;[INF] 3, 2
; line   267 :                 return;
$DGL	0,233
	ret							;[INF] 1, 6
??eb11_tsk_sys:
; line   268 :             }
; line   269 :             return;
??eb10_tsk_sys:
; line   270 :         }
?L0037:
; line   271 :         else
; line   272 :         {
??bb12_tsk_sys:
; line   273 :             // 省電力へ移行
; line   274 :             BT_TEMP_P = 0;
$DGL	0,240
	clr1	P1.7						;[INF] 3, 2
; line   275 :             while( RWST )
$DGL	0,241
?L0042:
	bf	RTCC1.1,$?L0043					;[INF] 4, 5
; line   276 :             {;}
$DGL	0,242
??bb13_tsk_sys:
??eb13_tsk_sys:
	br	$?L0042						;[INF] 2, 3
?L0043:
; line   277 : 
; line   278 :             iic_mcu_stop(  );
$DGL	0,244
	call	!_iic_mcu_stop					;[INF] 3, 3
; line   279 : 
; line   280 :             // 割り込み待ちで寝る //
; line   281 :             RTCIMK = 1;
$DGL	0,247
	set1	MK1H.2						;[INF] 3, 2
; line   282 : #ifndef _PARRADIUM_
; line   283 : 
; line   284 : #ifdef _MCU_BSR_
; line   285 :             CKC = 0b00001001;
$DGL	0,251
	mov	CKC,#09H	; 9 				;[INF] 3, 1
; line   286 :             OSMC = 0x00;
$DGL	0,252
	clrb	!OSMC						;[INF] 3, 1
; line   287 : #endif
; line   288 :             STOP(  );
$DGL	0,254
	stop							;[INF] 2, 3
; line   289 : #ifdef _MCU_BSR_
; line   290 :             OSMC = 0x01;
$DGL	0,256
	oneb	!OSMC						;[INF] 3, 1
; line   291 :             CKC = 0b00001000;
$DGL	0,257
	mov	CKC,#08H	; 8 				;[INF] 3, 1
; line   292 : #endif
; line   293 : 
; line   294 : #endif
; line   295 :             RTCIMK = 0;
$DGL	0,261
	clr1	MK1H.2						;[INF] 3, 2
; line   296 :             // 起きる //
; line   297 : 
; line   298 :             // 起きる条件は
; line   299 :             // ・KeyReturn割り込み（電源ボたん）
; line   300 :             // ・RTCアラーム
; line   301 :             // ・アダプタ挿抜
; line   302 :             system_status.pwr_state = OFF;  //
$DGL	0,268
	oneb	!_system_status					;[INF] 3, 1
; line   303 :             renge_task_interval_run_force = 1;
$DGL	0,269
	set1	_renge_task_interval_run_force			;[INF] 3, 2
; line   304 :             KRMK = 1;
$DGL	0,270
	set1	MK1H.3						;[INF] 3, 2
; line   305 :             return;
$DGL	0,271
	ret							;[INF] 1, 6
??eb12_tsk_sys:
; line   306 :         }
?L0038:
; line   307 : 
; line   308 :     default:
; line   309 :         while( 1 )
; line   310 :         {
??bb14_tsk_sys:
; line   311 :             NOP(  );
$DGL	0,277
	nop							;[INF] 1, 1
??eb14_tsk_sys:
; line   312 :             // あり得ないステート
; line   313 :         }
$DGL	0,279
	br	$?L0038						;[INF] 2, 3
??eb00_tsk_sys:
; line   314 : 
; line   315 :     }
?L0004:
; line   316 : }
$DGL	0,282
??ef_tsk_sys:
	ret							;[INF] 1, 6
??ee_tsk_sys:
; line   317 : 
; line   318 : 
; line   319 : 
; line   320 : /*******************************************************//**
; line   321 :     PMICが電源異常で止めたか確認
; line   322 :  **********************************************************/
; line   323 : static void chk_emergencyExit(){
_chk_emergencyExit:
$DGL	1,166
??bf_chk_emergencyExit:
; line   324 : #ifndef _PARRADIUM_
; line   325 :     static state;
; line   326 : 
; line   327 :     if( !RESET1_n )
$DGL	0,5
	bt	P0.0,$?L0049					;[INF] 4, 5
; line   328 :     {
??bb00_chk_emergencyExit:
; line   329 :         if( PM_chk_LDSW(  ) == 0 )
$DGL	0,7
	movw	ax,#03H	; 3 					;[INF] 3, 1
	push	ax						;[INF] 1, 1
	mov	x,#084H	; 132 					;[INF] 2, 1
	call	!_iic_mcu_read_a_byte				;[INF] 3, 3
	pop	ax						;[INF] 1, 1
	mov	a,c						;[INF] 1, 1
	and	a,#01H	; 1 					;[INF] 2, 1
	cmp0	a						;[INF] 1, 1
	bnz	$?L0051						;[INF] 2, 4
; line   330 :         {
??bb01_chk_emergencyExit:
; line   331 :             // PMICが異常終了判断をした
; line   332 :             system_status.pwr_state = OFF_TRIG;
$DGL	0,10
	clrb	!_system_status					;[INF] 3, 1
; line   333 :             renge_task_interval_run_force = 1;
$DGL	0,11
	set1	_renge_task_interval_run_force			;[INF] 3, 2
??eb01_chk_emergencyExit:
; line   334 :         }
$DGL	0,12
	ret							;[INF] 1, 6
?L0051:
; line   335 :         else
; line   336 :         {
??bb02_chk_emergencyExit:
; line   337 :             if( state == 0 )
$DGL	0,15
	clrw	ax						;[INF] 1, 1
	cmpw	ax,!?L0048	; state 			;[INF] 3, 1
	bnz	$?L0050						;[INF] 2, 4
; line   338 :             {
??bb03_chk_emergencyExit:
; line   339 :                 state = 1;
$DGL	0,17
	onew	ax						;[INF] 1, 1
	movw	!?L0048,ax	; state 			;[INF] 3, 1
; line   340 :             // デバッガなりがリセットをかけた
; line   341 :             iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_BL, 
;              0 );
$DGL	0,19
	clrw	ax						;[INF] 1, 1
	push	ax						;[INF] 1, 1
	mov	x,#04H	; 4 					;[INF] 2, 1
	push	ax						;[INF] 1, 1
	mov	x,#084H	; 132 					;[INF] 2, 1
	call	!_iic_mcu_write_a_byte				;[INF] 3, 3
	addw	sp,#04H	; 4 					;[INF] 2, 1
; line   342 :             vreg_ctr[VREG_C_STATUS] = ( vreg_ctr[VREG_C_STATUS] 
;              & 0b10011111 );
$DGL	0,20
	mov	a,!_vreg_ctr+15					;[INF] 3, 1
	and	a,#09FH	; 159 					;[INF] 2, 1
	mov	!_vreg_ctr+15,a					;[INF] 3, 1
; line   343 :             vreg_ctr[VREG_C_COMMAND0] |= REG_BIT_RESET1_REQ;
$DGL	0,21
	set1	!_vreg_ctr+32.1					;[INF] 4, 2
; line   344 :             renge_task_immed_add( do_command0 );
$DGL	0,22
	movw	ax,#loww (_do_command0)				;[INF] 3, 1
	call	!_renge_task_immed_add				;[INF] 3, 3
??eb03_chk_emergencyExit:
; line   345 :         }
; line   346 :         }
??eb02_chk_emergencyExit:
; line   347 :     }
$DGL	0,25
??eb00_chk_emergencyExit:
	ret							;[INF] 1, 6
?L0049:
; line   348 :     else
; line   349 :     {
??bb04_chk_emergencyExit:
; line   350 :         state = 0;
$DGL	0,28
	clrw	ax						;[INF] 1, 1
	movw	!?L0048,ax	; state 			;[INF] 3, 1
??eb04_chk_emergencyExit:
; line   351 :     }
?L0050:
; line   352 : #endif
; line   353 : }
$DGL	0,31
??ef_chk_emergencyExit:
	ret							;[INF] 1, 6
??ee_chk_emergencyExit:
; line   354 : 
; line   355 : 
; line   356 : 
; line   357 : 
; line   358 : 
; line   359 : /* ========================================================
; line   360 :   CPUからのスリープ要求
; line   361 :   　ポーリングにしました。
; line   362 :  ======================================================== */
; line   363 :     /*
; line   364 : __interrupt void intp0_slp(  )
; line   365 : {                               // SLP
; line   366 :   if( SLP_REQ ){
; line   367 :     system_status.pwr_state = SLEEP_TRIG;
; line   368 :   }else{
; line   369 :     system_status.pwr_state = ON_TRIG;
; line   370 :     if( PM_BL_set() != ERR_SUCCESS ){
; line   371 :       renge_task_interval_run_force = 1;
; line   372 :       iic_mcu_stop();
; line   373 :       system_status.pwr_state = OFF_TRIG;
; line   374 :     }
; line   375 :   }
; line   376 :   renge_task_interval_run_force = 1;
; line   377 : }
; line   378 :   */
; line   379 : 
; line   380 : 
; line   381 : 
; line   382 : /*******************************************************//**
; line   383 :   全く意味ないですが、気分的な物で...
; line   384 :  **********************************************************/
; line   385 : task_status_immed tski_firm_update(){
_tski_firm_update:
$DGL	1,193
??bf_tski_firm_update:
; line   386 :     firm_update();
$DGL	0,2
	call	!_firm_update					;[INF] 3, 3
; line   387 :     return( ERR_SUCCESS );
$DGL	0,3
	clrw	bc						;[INF] 1, 1
; line   388 : }
$DGL	0,4
??ef_tski_firm_update:
	ret							;[INF] 1, 6
??ee_tski_firm_update:

@@CODEL	CSEG

@@BASE	CSEG	BASE
	END


; *** Code Information ***
;
; $FILE C:\78k_data\yav-mcu-basara\branches\0.10(fix)\task_sys.c
;
; $FUNC tsk_sys(35)
;	void=(void)
;	CODE SIZE= 433 bytes, CLOCK_SIZE= 384 clocks, STACK_SIZE= 12 bytes
;
; $CALL iic_mcu_start(80)
;	void=(void)
;
; $CALL PM_init(83)
;	void=(void)
;
; $CALL PM_sys_pow_on(85)
;	bc=(void)
;
; $CALL iic_mcu_stop(88)
;	void=(void)
;
; $CALL PM_LCD_vcom_set(100)
;	bc=(void)
;
; $CALL LED_init(122)
;	void=(void)
;
; $CALL IIC_ctr_Init(126)
;	void=(void)
;
; $CALL set_irq(136)
;	void=(int:ax, int:[sp+4])
;
; $CALL IIC_twl_Init(138)
;	void=(void)
;
; $CALL chk_emergencyExit(163)
;	void=(void)
;
; $CALL iic_mcu_write_a_byte(173)
;	bc=(int:ax, int:[sp+4], int:[sp+6])
;
; $CALL chk_emergencyExit(178)
;	void=(void)
;
; $CALL iic_mcu_write_a_byte(181)
;	bc=(int:ax, int:[sp+4], int:[sp+6])
;
; $CALL wait_ms(182)
;	void=(int:ax)
;
; $CALL LED_stop(208)
;	void=(void)
;
; $CALL IIC_ctr_Stop(209)
;	void=(void)
;
; $CALL IIC_twl_Stop(210)
;	void=(void)
;
; $CALL PM_sys_pow_off(235)
;	bc=(void)
;
; $CALL iic_mcu_stop(278)
;	void=(void)
;
; $FUNC chk_emergencyExit(323)
;	void=(void)
;	CODE SIZE= 73 bytes, CLOCK_SIZE= 68 clocks, STACK_SIZE= 8 bytes
;
; $CALL iic_mcu_read_a_byte(329)
;	bc=(int:ax, int:[sp+4])
;
; $CALL iic_mcu_write_a_byte(341)
;	bc=(int:ax, int:[sp+4], int:[sp+6])
;
; $CALL renge_task_immed_add(344)
;	bc=(pointer:ax)
;
; $FUNC tski_firm_update(385)
;	bc=(void)
;	CODE SIZE= 5 bytes, CLOCK_SIZE= 10 clocks, STACK_SIZE= 4 bytes
;
; $CALL firm_update(386)
;	bc=(void)

; Target chip : uPD79F0104
; Device file : E1.00b