#pragma SFR
#pragma NOP
#pragma HALT
#pragma STOP

#include "incs.h"
#include "renge.h"
#include "pm.h"

#include "accero.h"


extern u8 command_bl_set;


/* ========================================================
 ======================================================== */
void tsk_debug(  )
{
    u8      temp;
    static u8 count = 0;
    static u8 task_interval;

    if( system_status.pwr_state == ON_TRIG ){

        iic_mcu_write_a_byte( IIC_SLA_DCP, 0x08, 0x80 );     // ACR←0x80 揮発モードへ

    /*
       temp = iic_mcu_read_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO );
       count += 1;
       iic_mcu_write_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO, count );
       iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 3, count );
     */
    }
    return;
}

u8 temp_debug_3;

void tsk_debug2(  )
{
    u8      str[4];

    return;

    if( ( system_status.pwr_state == ON ) || ( system_status.pwr_state == SLEEP ) )
    {
/*
        str[3] = vreg_ctr[ VREG_C_FREE0 ];
        str[2] = vreg_ctr[ VREG_C_FREE1 ];
        str[1] = vreg_ctr[ VREG_C_STATUS ];
        str[0] = vreg_ctr[ VREG_C_RTC_SEC ];
*/
        str[3] = vreg_ctr[ VREG_C_BT_TEMP ];
        str[2] = vreg_ctr[ VREG_C_FREE0 ];
        str[1] = vreg_ctr[ VREG_C_FREE1 ];
        str[0] = MIN;

//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 2, vreg_ctr[ VREG_C_IRQ1 ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, boot_ura );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_SND_VOL ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_TUNE ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 0, vreg_ctr[ VREG_C_ACC_ZH ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 3, vreg_ctr[ VREG_C_TUNE ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 2, vreg_ctr[ VREG_C_SND_VOL ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_STATUS ] );
//    iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 0, vreg_ctr[ VREG_C_ACC_ZH ] );

        iic_mcu_write( IIC_SLA_DBG_MONITOR, 0, 4, &str[0] );
    }
    return;
}


#if 0
/* ========================================================
 タスクひな形
 ======================================================== */
task_interval tsk_hina(  )
{
    switch ( system_status.pwr_state )
    {
    case OFF:
    case ON_TRIG:
    case ON:
    case SLEEP_TRIG:
    case SLEEP:
    case OFF_TRIG:
    default:
    }

    return ( 次の起 ・ｮまでのシ ・X ・e ・ tick ・・);  // 毎 tic 呼ばれることになります
}


// ポインタで何かもらうのは危険な気がしてきた
/* このように使う
      renge_task_immed_add( タスク関数へのポインタ );
*/
task_status_immed tsk_imm_hina( u8 * arg )
{
    return ( ERR_FINISED );
    // ERR_FINISED タスクを削除
    // ERR_CONTINUE 次になんか割り込みなり、ユーザー操作なり、システムチックが
    //             来たときに再度実行
}


#endif