#include "config.h"

//#pragma interrupt INTWDTI	fn_intwdti  // 未使用
//#pragma interrupt INTLVI	fn_intlvi   // 未使用

#pragma interrupt INTP0		intp0_slp   // SLP (CPUより、要求）
//#pragma interrupt INTP1		fn_intp1 // (I2C)
//#pragma interrupt INTP2		fn_intp2 // (I2C)
//#pragma interrupt INTP3		fn_intp3 // 未搭載
#pragma interrupt INTP4		intp4_extdc  // EXTDC, ただし電源offから起こすのみ。通常はポーリング
#pragma interrupt INTP5		intp5_shell  // SHELL_CLOSE, ただし電源offから起こすのみ。通常はポーリング
#pragma interrupt INTP6		intp6_PM_irq // CODEC経由で旧PMICへのコマンド書き込み

#ifdef _MCU_BSR_
#pragma interrupt INTP21	intp21_RFTx  // 電波送信パルス
#else
#pragma interrupt INTP7		intp21_RFTx
#endif


//#pragma interrupt INTCMP0	fn_intcmp0
//#pragma interrupt INTCMP1	fn_intcmp1
//#pragma interrupt INTDMA0	fn_intdma0
#pragma interrupt INTDMA1	int_dma1

//#pragma interrupt INTST0	fn_intst0
/* #pragma interrupt INTCSI00	fn_intcsi00 */
//#pragma interrupt INTSR0	fn_intsr0
/* #pragma interrupt INTCSI01	fn_intcsi01 */
//#pragma interrupt INTSRE0	fn_intsre0

//#pragma interrupt INTST1	fn_intst1
/* #pragma interrupt INTCSI10	fn_intcsi10 */
#pragma interrupt INTIIC10	int_iic10
//#pragma interrupt INTSR1	fn_intsr1
//#pragma interrupt INTSRE1	fn_intsre1


#ifdef _MCU_KE3_
#pragma interrupt INTIICA	int_iic_ctr  // CTR側
#else

//#ifdef _MODEL_WM0_
#pragma interrupt INTIICA0	int_iic_twl  // テレコのWM0仕様
#pragma interrupt INTIICA1	int_iic_ctr
/*
#else
#pragma interrupt INTIICA0	int_iic_ctr  // CTR側
#pragma interrupt INTIICA1	int_iic_twl  // TWL側
#endif
*/

#endif

//#pragma interrupt INTTM00	fn_inttm00
//#pragma interrupt INTTM01	fn_inttm01
//#pragma interrupt INTTM02	fn_inttm02
//#pragma interrupt INTTM03	fn_inttm03

#pragma interrupt INTAD		int_adc
#pragma interrupt INTRTC	int_rtc
#pragma interrupt INTRTCI	int_rtc_int
#pragma interrupt INTKR		int_kr
//#pragma interrupt INTMD		fn_intmd

//#pragma interrupt INTTM04	fn_inttm04
//#pragma interrupt INTTM05	fn_inttm05
//#pragma interrupt INTTM06	fn_inttm06
//#pragma interrupt INTTM07	fn_inttm07


/****************************************************/
/*  未使用時のダミー関数定義                        */
/****************************************************/
__interrupt	void	fn_intwdti(){ while(1){}; }
__interrupt	void	fn_intlvi(){ while(1){}; }
//__interrupt	void	fn_intp0(){}  // tasks.c
__interrupt	void	fn_intp1(){ while(1){}; }    //
__interrupt	void	fn_intp2(){ while(1){}; }
__interrupt	void	fn_intp3(){ while(1){}; }
//__interrupt	void	fn_intp4(){ while(1){}; } // pm.c
//__interrupt	void	fn_intp5(){ while(1){}; } // pm.c
//__interrupt	void	fn_intp6(){ while(1){}; } // pm.c
//__interrupt	void	fn_intp7(){ while(1){}; } // led.c
//__interrupt	void	fn_intp21(){ while(1){}; } // led.c

__interrupt	void	fn_intcmp0(){ while(1){}; }
__interrupt	void	fn_intcmp1(){ while(1){}; }
__interrupt	void	fn_intdma0(){ while(1){}; }
//__interrupt	void	fn_intdma1(){}  // i2c_mcu.cにある

__interrupt	void	fn_intst0(){ while(1){}; }
/* __interrupt	void	fn_intcsi00(){} */
__interrupt	void	fn_intsr0(){ while(1){}; }
/* __interrupt	void	fn_intcsi01(){} */
__interrupt	void	fn_intsre0(){ while(1){}; }

__interrupt	void	fn_intst1(){ while(1){}; }
/* __interrupt	void	fn_intcsi10(){} */
//__interrupt	void	fn_intiic10(){ while(1){}; }
__interrupt	void	fn_intsr1(){ while(1){}; }
__interrupt	void	fn_intsre1(){ while(1){}; }

//__interrupt	void	fn_intiica(){} // i2c.cにある
/* __interrupt	void	fn_inttm00(){} */ /* sub.cにて定義 */
__interrupt	void	fn_inttm01(){ while(1){}; }
__interrupt	void	fn_inttm02(){ while(1){}; }
__interrupt	void	fn_inttm03(){ while(1){}; }

//__interrupt	void	fn_intad(){ while(1){}; }  // adc.c
__interrupt	void	fn_intrtc(){ while(1){}; }
//__interrupt	void	int_rtcint(){} // rtc.cにある
//__interrupt	void	fn_intkr(){}  // main.c
__interrupt	void	fn_intmd(){ while(1){}; }

__interrupt	void	fn_inttm04(){ while(1){}; }
__interrupt	void	fn_inttm05(){ while(1){}; }
__interrupt	void	fn_inttm06(){ while(1){}; }
__interrupt	void	fn_inttm07(){ while(1){}; }