diff --git a/trunk/VCProj/bsr_trunk.sdf b/trunk/VCProj/bsr_trunk.sdf index e4dbb99..79012f7 100644 Binary files a/trunk/VCProj/bsr_trunk.sdf and b/trunk/VCProj/bsr_trunk.sdf differ diff --git a/trunk/VCProj/bsr_trunk.suo b/trunk/VCProj/bsr_trunk.suo index 6352142..91ae417 100644 Binary files a/trunk/VCProj/bsr_trunk.suo and b/trunk/VCProj/bsr_trunk.suo differ diff --git a/trunk/accero.c b/trunk/accero.c index 0cc91f7..aa584ec 100644 --- a/trunk/accero.c +++ b/trunk/accero.c @@ -108,9 +108,9 @@ task_status_immed tski_cbk_accero( ) else { // 加速度センサが異常になったので止める - vreg_ctr[ VREG_C_ACC_CONFIG ] &= ~( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ); + vreg_stop_acc; tski_acc_setup(); - vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_ACCERO_ERR; + vreg_set_acc_error; return ( TSKI_FINISHED ); // タスクの削除は必要 } } @@ -123,9 +123,7 @@ task_status_immed tski_cbk_accero( ) acc_retry_count = 0; // 加速度更新＆割り込み - if( (( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_ACQ ) != 0 ) && - ( system_status.pwr_state == ON ) - ) + if( is_acc_on && ( system_status.pwr_state == ON )) { set_irq( VREG_C_IRQ1, REG_BIT_ACC_DAT_RDY ); // ゴミデータのカラ読み @@ -135,9 +133,8 @@ task_status_immed tski_cbk_accero( ) iic_mcu_read( IIC_SLA_ACCEL, ( ACC_REG_X | ACC_REG_FLG_BURST_ACCESS ), ACC_RAW_DATA_SIZE, temp ); } } - if( (( system_status.pwr_state == ON ) - ||( system_status.pwr_state == SLEEP )) - &&( ( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_HOSU ) != 0 ) + if( (( system_status.pwr_state == ON )||( system_status.pwr_state == SLEEP )) + &&( is_pedo_on ) ) { pedometer(); // 歩数計 @@ -197,8 +194,7 @@ task_status_immed tski_acc_setup( ) str_send_buf[3] = 0x80; // ctrl3 block update:enable, MSB first, scale: +-2G(default), selftest: dis { - u8 acc_setting_sent = ( vreg_ctr[VREG_C_ACC_CONFIG] & - ( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ )); + u8 acc_setting_sent = ( vreg_ctr[VREG_C_ACC_CONFIG] & ( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ )); if( acc_setting_sent == 0 ) { @@ -221,7 +217,7 @@ task_status_immed tski_acc_setup( ) if( iic_mcu_write( IIC_SLA_ACCEL, ( ACC_REG_CTRL1 | ACC_REG_FLG_BURST_ACCESS ), 4, str_send_buf ) == I2C_ERR_NOSLAVE ) { // センサ反応無し。タスクは削除しなくてはならない。 - vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_ACCERO_ERR; + vreg_set_acc_error; return ( TSKI_FINISHED ); // おしまい } @@ -243,8 +239,7 @@ task_status_immed tski_acc_setup( ) // センサに書きにいっている最中にSoCがまた書き換えてしまうかもしれない DI_wt_chk(); - if( acc_setting_sent != ( vreg_ctr[VREG_C_ACC_CONFIG] & - ( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ))) + if( acc_setting_sent != ( vreg_ctr[VREG_C_ACC_CONFIG] & ( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ))) { // DI状態のまま帰る return ( TSKI_CONTINUE ); // ちょっと間をおいて再度書きにくる // もっとよい実装？ @@ -265,7 +260,7 @@ task_status_immed tski_acc_setup( ) __interrupt void intp23_ACC_ready( ) { EI(); - if( ( vreg_ctr[VREG_C_ACC_CONFIG] & 0x03 ) != 0x00 ) + if( ( vreg_ctr[VREG_C_ACC_CONFIG] & ( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ) ) != 0x00 ) { // 加速度センサ on if( ( system_status.pwr_state == ON ) || ( system_status.pwr_state == SLEEP ) ) diff --git a/trunk/bsr.hex b/trunk/bsr.hex index 4f42705..7b57414 100644 --- a/trunk/bsr.hex +++ b/trunk/bsr.hex @@ -245,8 +245,8 @@ :100F3B009DDAADDC5BD9085BD808BDD8D7C3C7F346 :100F4B00728EFDC162314C410036204E1161A07290 :070F5B00C09EFD62C6C2D773 -:0A0FF60031343A31303A3130000056 -:0A20000031343A31303A313000003B +:0A0FF60031343A34303A323400004E +:0A20000031343A34303A3234000033 :10200A0005214F7B9EC5E9000104080D12171C1F0C :10201A00080100001F003B005A0078009700B50035 :10202A00D400F300110130014E01192634445362E1 @@ -997,6 +997,6 @@ :104E9400C5AC0416F643DD078B99A7A5B3EFF5C29D :024EA400C6D76F :024FF400324F3A -:0A4FF60031343A31303A3130000016 +:0A4FF60031343A34303A323400000E :00000001FF  \ No newline at end of file diff --git a/trunk/bsr.lmf b/trunk/bsr.lmf index 5765c6d..8b01ebe 100644 Binary files a/trunk/bsr.lmf and b/trunk/bsr.lmf differ diff --git a/trunk/hoge.bin b/trunk/hoge.bin index 4325125..bb0e6f4 100644 Binary files a/trunk/hoge.bin and b/trunk/hoge.bin differ diff --git a/trunk/pm.c b/trunk/pm.c index 829e9e8..607edd1 100644 --- a/trunk/pm.c +++ b/trunk/pm.c @@ -253,7 +253,7 @@ void bt_get_charge_status() { if( !BT_CHG_Ena_n && ( vreg_ctr[ VREG_C_BT_REMAIN ] < 60 ) - && !( vreg_ctr[ VREG_C_STATUS_1 ] & REG_BIT_MGIC_ERR ) + && !( is_mgic_error ) ) { BT_IN_CHG_delayed_n = 0; // 充電中と扱う。充電が終わっているはずがない @@ -506,12 +506,12 @@ static void BT_mgic_init() if( send_cmd_mgic_2B( BT_GAUGE_REG_LOCK, swap_endian_16( MGIC_CMD_UNLOCK_KEY ) ) != ERR_SUCCESS ) { // 残量IC NACK - vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_MGIC_ERR; + vreg_set_mgic_error; return; // おしまい } - vreg_ctr[ VREG_C_STATUS_1 ] &= ~REG_BIT_MGIC_ERR; + vreg_clear_mgic_error; // wait_ms( 5 + 1 ); 前にウェイト入れてるので不要 @@ -629,7 +629,7 @@ task_status_immed tski_BT_temp_update( ) } else { - vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_MGIC_ERR; + vreg_set_mgic_error; } } } @@ -677,7 +677,7 @@ void BT_get_left(){ if( read_BT_SOC( temp ) != ERR_SUCCESS ) { // 残量ICがNACK …バッテリはずれた - vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_MGIC_ERR; + vreg_set_mgic_error; bt_authorized = false; reg_volatile_temp_bt_remain = 0; force_off = true; @@ -686,7 +686,7 @@ void BT_get_left(){ { u16 temp_u16; - vreg_ctr[ VREG_C_STATUS_1 ] &= ~REG_BIT_MGIC_ERR; + vreg_clear_mgic_error; // バッテリパラメータの関係でビットシフトが必要 temp_u16 = temp[0] * 256 + temp[1]; temp_u16 /= p_bt_param->v_scale; diff --git a/trunk/task_status.c b/trunk/task_status.c index 644bd7a..361497b 100644 --- a/trunk/task_status.c +++ b/trunk/task_status.c @@ -56,7 +56,7 @@ void tsk_status( ) if( diff & REG_BIT_BATT_CHARGE ) { // 充電状態反映 - if( vreg_ctr[VREG_C_STATUS] & REG_BIT_BATT_CHARGE ) // set_irqを別々に呼ぶ方がコンパクト + if( is_bt_charging ) // set_irqを別々に呼ぶ方がコンパクト { set_irq( VREG_C_IRQ1, REG_BIT_BT_CHG_START ); } @@ -74,7 +74,7 @@ void tsk_status( ) if( diff & REG_BIT_ST_SHELL_OPEN ) { // 蓋の開け閉め - if( vreg_ctr[VREG_C_STATUS] & REG_BIT_ST_SHELL_OPEN ) + if( is_shell_open ) { set_irq( VREG_C_IRQ0, REG_BIT_SHELL_OPEN ); } diff --git a/trunk/task_sys.c b/trunk/task_sys.c index 8313614..17e8010 100644 --- a/trunk/task_sys.c +++ b/trunk/task_sys.c @@ -509,7 +509,7 @@ static void chk_emergencyExit(){ static u8 shirobako_power_control_count; // wifi モジュールキャリブレーションモードでreset1を自分から下げてるときはチェックをパス - if( is_wifi_calib_reset1_ast() ) + if( is_wifi_calib_reset1_ast ) { return; } diff --git a/trunk/vreg_ctr.h b/trunk/vreg_ctr.h index fa96bd6..07f91c5 100644 --- a/trunk/vreg_ctr.h +++ b/trunk/vreg_ctr.h @@ -308,7 +308,16 @@ void vreg_ctr_after_read( u8 adrs, u8 data ); void set_irq( u8 irqreg, u8 irq_flg ); +#define is_wifi_calib_reset1_ast ( vreg_ctr[ VREG_C_WIFI_CALIB ] & REG_BIT_WIFI_CALIB_RST1_AST ) +#define vreg_stop_acc ( vreg_ctr[ VREG_C_ACC_CONFIG ] &= ~( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ) ) +#define vreg_set_acc_error ( vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_ACCERO_ERR ) +#define is_acc_on ( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_ACQ ) +#define is_pedo_on ( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_HOSU ) +#define is_mgic_error ( vreg_ctr[ VREG_C_STATUS_1 ] & REG_BIT_MGIC_ERR ) +#define vreg_set_mgic_error ( vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_MGIC_ERR ) +#define vreg_clear_mgic_error ( vreg_ctr[ VREG_C_STATUS_1 ] &= ~(REG_BIT_MGIC_ERR) ) +#define is_bt_charging ( vreg_ctr[VREG_C_STATUS] & REG_BIT_BATT_CHARGE ) +#define is_shell_open ( vreg_ctr[VREG_C_STATUS] & REG_BIT_ST_SHELL_OPEN ) -#define is_wifi_calib_reset1_ast() ( vreg_ctr[ VREG_C_WIFI_CALIB ] & REG_BIT_WIFI_CALIB_RST1_AST ) #endif diff --git a/trunk/yav_mcu_bsr.plg b/trunk/yav_mcu_bsr.plg index 6459fa5..334c5d4 100644 --- a/trunk/yav_mcu_bsr.plg +++ b/trunk/yav_mcu_bsr.plg @@ -5,10 +5,171 @@ loader.c(161) : CC78K0R warning W0401: Conversion may lose significant digits Compilation complete, 0 error(s) and 2 warning(s) found. "C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\loader.asm Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no pm.c +pm.c(535) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(841) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(845) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(873) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(887) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(961) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(970) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(1039) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(1185) : CC78K0R warning W0401: Conversion may lose significant digits +pm.c(1187) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 10 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\pm.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no i2c_ctr.c +i2c_ctr.c(49) : CC78K0R warning W0816: Redefined macro name 'IICS' +Compilation complete, 0 error(s) and 1 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\i2c_ctr.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no main.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\main.asm +Assembly complete, 0 error(s) and 0 warning(s) found. "C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no magic.c Compilation complete, 0 error(s) and 0 warning(s) found. "C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\magic.asm Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no WDT.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\WDT.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no i2c_mcu.c +i2c_mcu.c(188) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 1 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\i2c_mcu.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no i2c_twl.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\i2c_twl.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no led.c +led.c(90) : CC78K0R warning W0745: Expected function prototype +led.c(356) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 2 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\led.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no rtc.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\rtc.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2m -qvjl2w -sainter_asm -zpb -no vreg_ctr.c +vreg_ctr.c(153) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(154) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(156) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(158) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(159) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(242) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(242) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(247) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(247) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(251) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(251) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(255) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(255) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_ctr.c(259) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 14 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\vreg_ctr.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2m -qvjl2w -sainter_asm -zpb -no vreg_twl.c +vreg_twl.c(68) : CC78K0R warning W0401: Conversion may lose significant digits +vreg_twl.c(72) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 2 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\vreg_twl.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no adc.c +adc.c(104) : CC78K0R warning W0401: Conversion may lose significant digits +adc.c(190) : CC78K0R warning W0401: Conversion may lose significant digits +adc.c(241) : CC78K0R warning W0401: Conversion may lose significant digits +adc.c(308) : CC78K0R warning W0401: Conversion may lose significant digits +adc.c(434) : CC78K0R warning W0745: Expected function prototype +adc.c(463) : CC78K0R warning W0401: Conversion may lose significant digits +adc.c(468) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 7 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\adc.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no accero.c +accero.c(121) : CC78K0R warning W0745: Expected function prototype +Compilation complete, 0 error(s) and 1 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\accero.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2 -qvjl2w -sainter_asm -zpb -no self_flash.c +self_flash.c(289) : CC78K0R warning W0401: Conversion may lose significant digits +self_flash.c(290) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 2 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\self_flash.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no sw.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\sw.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no task_debug.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\task_debug.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no task_misc.c +task_misc.c(382) : CC78K0R warning W0401: Conversion may lose significant digits +task_misc.c(384) : CC78K0R warning W0401: Conversion may lose significant digits +task_misc.c(394) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 3 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\task_misc.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no task_sys.c +task_sys.c(230) : CC78K0R warning W0401: Conversion may lose significant digits +task_sys.c(292) : CC78K0R warning W0401: Conversion may lose significant digits +task_sys.c(570) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 3 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\task_sys.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no pedo_alg_thre_det2.c +pedo_alg_thre_det2.c(104) : CC78K0R warning W0745: Expected function prototype +pedo_alg_thre_det2.c(120) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 2 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\pedo_alg_thre_det2.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no task_status.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\task_status.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no led_cam.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\led_cam.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no led_pow.c +led_pow.c(119) : CC78K0R warning W0401: Conversion may lose significant digits +led_pow.c(124) : CC78K0R warning W0401: Conversion may lose significant digits +led_pow.c(177) : CC78K0R warning W0401: Conversion may lose significant digits +led_pow.c(240) : CC78K0R warning W0401: Conversion may lose significant digits +led_pow.c(271) : CC78K0R warning W0401: Conversion may lose significant digits +Compilation complete, 0 error(s) and 5 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\led_pow.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no hal.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\hal.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no voltable.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\voltable.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no pedo_lpf_coeff.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\pedo_lpf_coeff.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no kanaria_c.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\kanaria_c.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no util_funcs.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\util_funcs.asm +Assembly complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\bin\cc78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -irenge -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\inc78k0r" -ms -rd2s2 -qvjl2w -sainter_asm -zpb -no i2c_mcu-sub.c +Compilation complete, 0 error(s) and 0 warning(s) found. +"C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\ra78k0r.exe" -c9F0104 -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -pinter_asm -ks -kx inter_asm\i2c_mcu-sub.asm +Assembly complete, 0 error(s) and 0 warning(s) found. "C:\Program Files (x86)\NEC Electronics Tools\RA78K0R\W1.33\bin\lk78k0r.exe" -y"c:\program files (x86)\nec electronics tools\dev" -_msgoff -obsr.lmf "..\..\..\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\lib78k0r\s0rm.rel" -gi1B339499E033F240BFAAh -pbsr_k0r.map -nkd -gb7EFBFFh -b"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files (x86)\NEC Electronics Tools\CC78K0R\W2.13\lib78k0r" -dbsr_mcu.dr -s -w2 loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel sw.rel task_debug.rel task_misc.rel task_sys.rel pedo_alg_thre_det2.rel ini_VECT.rel task_status.rel led_cam.rel led_pow.rel hal.rel batt_params.rel voltable.rel pedo_lpf_coeff.rel kanaria.rel kanaria_c.rel get_ei.rel util_funcs.rel i2c_mcu-sub.rel RA78K0R warning W3420: File 'loader.rel' already has had error(s)/warning(s) by 'CC78K' Read Device File Directory : C:\PROGRAM FILES (X86)\NEC ELECTRONICS TOOLS\DEV\ @@ -36,4 +197,4 @@ intel-HEX to bsr bin converter file converted! -Build Total error(s) : 0 Total warning(s) : 17 +Build Total error(s) : 0 Total warning(s) : 70