1.0.1B (TWL-PMIC版は全く検証してません)

adc.c 音量が瞬間的に大きくなる対策で割り込み禁止の区間を変更。余り期間を延ばすとTWLが動かなくなるので慎重に
batt_params.h 未定義バッテリメーカーのダミー値をそれっぽいものに差し替え
pm.c アダプタ接続時、満充電でも充電禁止温度でも強制的に1秒くらい充電ランプを点ける。その状態で抜かれたときローコストにできるだけ速く消灯させる。（アダプタ接続のチェック：修理品＆UIのため
pm.c 電池少ない割り込み　評価結果がきたので割り込みを入れるのを10%,5%,0%に。それと電圧で残量％の上書き
task_sys.c 電池が空っぽの時にアダプタをつないでいても電源が入らなかった。さすがに不親切なので電源は入れさせる。(変えるかも)　すぐに電池切れ割り込みが入る。
vreg_ctr.c TWLのステータスレジスタ、CTR側のミラーからかけるようにした。　AGBで困るとのこと


git-svn-id: file:///Volumes/Transfer/gigaleak_20231201/2020-05-23%20-%20ctr.7z%20+%20svn_v1.068.zip/ctr/svn/ctr_mcu@190 013db118-44a6-b54f-8bf7-843cb86687b1

trunk/adc.c

@@ -84,7 +84,8 @@ void tsk_adc(  )
     static u8 sndvol_codec;
     static u8 bt_temp_old;
 
-    if( task_interval-- != 0 )
+
+	if( task_interval-- != 0 )
     {
         return;
     }
@@ -162,7 +163,7 @@ void tsk_adc(  )
                     // レジスタから強制セット
                     adc_raw_vol = ( vreg_ctr[ VREG_C_VOL_DIGITAL ] * 4 );
                 }
-
+// todo debug
                 if( ( abs( adc_raw_vol - vol_old ) >= 2 )       // 生値でこれくらいずれたら更新(似非ヒステリシス)
                     || ( --force_update_vol == 0 ) )            // ポーリング
                 {
@@ -172,7 +173,7 @@ void tsk_adc(  )
                     vreg_ctr[ VREG_C_SND_VOL ] = ( vol_old / 4 ); // 64段
 
                     // codecに伝える
-                    iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL, slider_to_codec[ vol_old / 4 ] );
+                    iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL, slider_to_codec[ ( vol_old / 4 ) & 0x3F ] );
 #ifndef _MODEL_CTR_
                     iic_mcu_write_a_byte( IIC_SLA_DCP, 0, slider_to_codec[ ( 255 - vol_old ) / 4 ] );
 #endif
@@ -184,8 +185,7 @@ void tsk_adc(  )
             // バッテリ識別 ///////////////////////////
             /* 呼ばれません */
         }
-    }
+	}
-
 
     ADCEN = 1;
     ADM =  0b00001011;      // セレクトモード、昇圧、fCLK/6 ///ここから ↓
@@ -197,7 +197,6 @@ void tsk_adc(  )
 
     ADIF = 0;
     ADMK = 0;
-
 }
 
 
@@ -247,8 +246,6 @@ __interrupt void int_adc(  )
 
     adc_data = ADCRH;
 
-    EI();
-
     switch ( ADS )
     {
 /*
@@ -259,6 +256,7 @@ case ( ADC_SEL_AMB_BRIT ): //
 
     case ( ADC_SEL_TUNE ):
         hist_tune[index] = adc_data;
+	    EI();
 #ifdef _MODEL_WM0_
         adc_raw_dep = 255 - getmean3( hist_tune );
 #else
@@ -268,6 +266,7 @@ case ( ADC_SEL_AMB_BRIT ): //
 
     case ( ADC_SEL_VOL ):
         hist_snd_vol[index] = adc_data;
+	    EI();
 #ifdef _MODEL_CTR_
         if( system_status.model == MODEL_TS_BOARD )
         {
@@ -284,6 +283,7 @@ case ( ADC_SEL_AMB_BRIT ): //
 
     case ( ADC_SEL_BATT_TEMP ):
         hist_bt_temp[index] = adc_data;
+	    EI();
         raw_adc_temperature = getmean3( hist_bt_temp );
         if( (( vreg_ctr[ VREG_C_STATUS_1 ] & REG_BIT_GASGAUGE_ERR ) == 0 ) &&
              (( system_status.pwr_state == ON ) ||

trunk/batt_params.h

@@ -116,12 +116,12 @@ typedef struct _st_bt_comp
 const st_bt_comp BT_COMP[] = {
 //    rcomp R_co_up     R_co_down
     { 135,  -256* 0.15, -256* 2.15 }, // maxell
-    { 180,           0,          0 }, // dummy
+    { 135,  -256* 0.15, -256* 2.15 }, // dummy
-    { 180,           0,          0 }, // dummy
+    { 135,  -256* 0.15, -256* 2.15 }, // dummy
-    { 180,           0,          0 }, // dummy
+    { 135,  -256* 0.15, -256* 2.15 }, // dummy
-    { 180,           0,          0 }, // dummy
+    { 171,  -256* 0.00, -256* 2.30 }, // dummy
     { 171,  -256* 0.00, -256* 2.30 }, // panasonic
-    { 180,           0,          0 }  // dummy
+    { 171,  -256* 0.00, -256* 2.30 }  // dummy
 };
 
 #endif

trunk/config.h

@@ -5,9 +5,10 @@
 //#define _FORCE_OFF_1SEC_
 //#define _ALLOW_NOBATT_
 //#define _FORCE_INFO_LED_FULLCOLOR_
+//#define _debug_bt_irq_
 
 #define MCU_VER_MAJOR    0x00
-#define MCU_VER_MINOR    0x1A
+#define MCU_VER_MINOR    0x1B
 
 //#define PM_CCIC_TIM
 

trunk/pm.c

@@ -237,9 +237,8 @@ task_status_immed tski_vcom_set(  )
  ======================================================== */
 err PM_sys_pow_on(  )
 {
-#ifdef _PMIC_CTR_
-
     // 電源順次立ち上げ
+#ifdef _PMIC_CTR_
 //    PM_reset_ast(  );       不要 PM_LDSW_onまかせ
     RESET2_ast;
     FCRAM_RST_ast;
@@ -282,7 +281,7 @@ err PM_sys_pow_on(  )
 
     wait_ms( 100 );
 #else
-    // TWL PMIC
+    // TWL PMIC //
     u8      temp;
 
     // 電源投入
@@ -620,6 +619,7 @@ void tsk_batt(  )
         {
             set_bit( 0, vreg_ctr[VREG_C_STATUS], REG_BIT_POW_SUPPLY );
             set_irq( VREG_C_IRQ1, REG_BIT_BT_DC_DISC );
+            chg_led_override = 0;
         }
     }
 
@@ -985,21 +985,29 @@ void BT_get_left(){
 					vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_GASGAUGE_ERR;
 					bt_chg_ready = 0;
 					vreg_ctr[ VREG_C_BT_REMAIN ] = 0;
+					system_status.cnt_force_off = 1;  // 強制電源断フラグ
 				}
 				else
 				{
-					if( temp[0] < ( 3100 / 16 / 1.25 ) )
+					vreg_ctr[ VREG_C_BT_VOLTAGE ] = temp[0];
+
+                    iic_mcu_read( IIC_SLA_BT_GAUGE, BT_GAUGE_REG_SOC, 2, temp );
+					vreg_ctr[ VREG_C_BT_REMAIN ] = temp[0];
+					vreg_ctr[ VREG_C_BT_REMAIN_FINE ] = temp[1];
+
+                    // モデルゲージと実際との乖離が大きい/電圧がPMICの限界を超えそう
+					if( vreg_ctr[ VREG_C_BT_VOLTAGE ] < V_TH_ZERO )
 					{
 						// 電圧が規定値になってしまったので強制off
 						vreg_ctr[ VREG_C_BT_REMAIN ] = 0;
 					}
-					else
+					else if(( vreg_ctr[ VREG_C_BT_VOLTAGE ] < V_TH_EMPTY ) && ( vreg_ctr[ VREG_C_BT_REMAIN ] > BATT_TH_EMPTY ))
 					{
-						// 電圧はまだ大丈夫、電池残量ＩＣとの通信もOK
+						vreg_ctr[ VREG_C_BT_REMAIN ] = BATT_TH_EMPTY;
-						vreg_ctr[ VREG_C_BT_VOLTAGE ] = temp[0];
+					}
-						iic_mcu_read( IIC_SLA_BT_GAUGE, BT_GAUGE_REG_SOC, 2, temp );
+					else if(( vreg_ctr[ VREG_C_BT_VOLTAGE ] < V_TH_LO    ) && ( vreg_ctr[ VREG_C_BT_REMAIN ] > BATT_TH_LO ))
-						vreg_ctr[ VREG_C_BT_REMAIN ] = temp[0];
+					{
-						vreg_ctr[ VREG_C_BT_REMAIN_FINE ] = temp[1];
+						vreg_ctr[ VREG_C_BT_REMAIN ] = BATT_TH_LO;
 					}
 				}
 			}
@@ -1021,12 +1029,17 @@ void BT_get_left(){
         }
         if(( vreg_ctr[ VREG_C_BT_REMAIN ] == 0 ) && ( bt_remain_old != 0 ))
         {
-            system_status.cnt_force_off = 1;  // 強制電源断フラグ
+//            system_status.cnt_force_off = 1;  // 強制電源断フラグ
         }
         bt_remain_old = vreg_ctr[ VREG_C_BT_REMAIN ];
+
+		if( system_status.pwr_state == OFF_TRIG )
+		{
+			bt_remain_old = 100;
+		}
     }
 
-    // PMIC-NTRに電池残量を教えてあげる
+	// PMIC-NTRに電池残量を教えてあげる
     iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_BT,
                           ( vreg_ctr[ VREG_C_BT_REMAIN ] <= BATT_TH_LO )? 1 : 0 );  // 1で電池切れ
 }

trunk/pm.h

@@ -6,16 +6,22 @@
 #define IIC_SLA_PMIC              0x84
 #define IIC_SLA_BT_GAUGE          0x6C
 
-
-
-#define BATT_TH_LO           8
-#define BATT_TH_EMPTY        3
-
 #define VCOM_DEFAULT_T  92
 #define VCOM_DEFAULT_B  95
 
 
 
+
+#define BATT_TH_LO           10
+#define BATT_TH_EMPTY        5
+
+
+#define V_K                  16 / 1.25
+#define V_TH_LO              (u8)( 3200 / V_K )
+#define V_TH_EMPTY           (u8)( 3150 / V_K )
+#define V_TH_ZERO            (u8)( 3100 / V_K )
+
+
 //=========================================================
 #define LED_CHARGE           P2.4
 
@@ -63,6 +69,7 @@ typedef enum BT_VENDER
 
 
 
+
 //=========================================================
 // CODEC上のPMIC互換レジスタ
 #define CODEC_REG_PM 0x10

trunk/rtc.c

@@ -176,7 +176,5 @@ void rtc_unlock(  )
  ======================================================== */
 __interrupt void int_rtc_int(  )
 {
-	DBG_LED_on;
     renge_flg_interval += 1;  // インクリメント/デクリメント命令を使うので DI()不要
-	DBG_LED_off;
 }

trunk/task_sys.c

@@ -97,8 +97,10 @@ void tsk_sys(  )
 
         // 残量チェック
         BT_get_left();         // 先に、BT_init()が実行されている必要があります。
-        if( vreg_ctr[VREG_C_BT_REMAIN] < 1 )
+        if(( vreg_ctr[VREG_C_BT_REMAIN] < 1 ) &&
+			( vreg_ctr[VREG_C_BT_VOLTAGE] < ( 3300 / 16 / 1.25 ) ))
         {
+			// 電池が少ないので起動させない(電圧チェックもされてる)
             renge_task_interval_run_force = 1;
             system_status.pwr_state = OFF_TRIG;
             return;

trunk/vreg_ctr.c

@@ -92,7 +92,7 @@ void vreg_ctr_write( u8 adrs, u8 data )
     {
 
     case ( VREG_C_MCU_STATUS ):
-//        vreg_twl[ REG_TWL_INT_ADRS_MODE ] = (u8)( ( data >> 6 ) & 0x03 );
+        vreg_twl[ REG_TWL_INT_ADRS_MODE ] = (u8)( ( data >> 6 ) & 0x03 );
         vreg_ctr[ VREG_C_MCU_STATUS ] = data;
         break;
 

trunk/yav_mcu_bsr.plg

@@ -3,16 +3,6 @@ C:\WINDOWS\system32\cmd.exe /c touch magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no rtc.c
-Compilation complete,    0 error(s) and    0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\rtc.asm
-Assembly complete,     0 error(s) and     0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no renge\renge.c
-renge\renge.c(149) : CC78K0R warning W0411: Illegal pointer combination
-renge\renge.c(157) : CC78K0R warning W0412: Illegal pointer combination in conditional expression
-Compilation complete,    0 error(s) and    2 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\renge.asm
-Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -gb7EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel sw.rel task_debug.rel task_misc.rel task_sys.rel pedo_alg_thre_det2.rel ini_VECT.rel task_status.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex -nu -ki  bsr.lmf
@@ -23,4 +13,4 @@ intel-HEX to bsr bin converter
  file converted!
 
 
-Build Total error(s) : 0  Total warning(s) : 2 
+Build Total error(s) : 0  Total warning(s) : 0 

trunk/yav_mcu_bsr.pri

@@ -78,9 +78,9 @@ Symbol Type=OFF
 Language=C
 Kanji=SJIS
 [Source]
-Geometry=71, 28, 844, 790
+Geometry=81, 63, 844, 790
 Window=Normal
-DispStart=269
+DispStart=267
 CaretPos=319,0
 Mode=Normal
 DispFile=
@@ -139,6 +139,30 @@ SaveRange=Screen
 SaveStart=
 SaveEnd=
 Accumulative=ON
+[Source1]
+Geometry=0, 0, 844, 790
+Window=Normal
+DispStart=945
+CaretPos=946,0
+Mode=Normal
+DispFile=pm.c
+Accumulative=ON
+[Source2]
+Geometry=25, 25, 844, 790
+Window=Normal
+DispStart=1
+CaretPos=1,0
+Mode=Normal
+DispFile=task_misc.c
+Accumulative=ON
+[Source3]
+Geometry=50, 50, 844, 790
+Window=Normal
+DispStart=351
+CaretPos=352,0
+Mode=Normal
+DispFile=task_sys.c
+Accumulative=ON
 [Assemble]
 Geometry=282, 92, 968, 626
 Window=Normal
@@ -968,44 +992,55 @@ Boundary=18088086
 5=.pmk4,P,S,A,+,1
 6=.chg_led_override,P,N,A,+,1
 7=.p4.3,P,S,A,+,1
-8=.system_status,.,N,A,+,1
+8=.PM0.0,P,S,A,+,1
-9=.battery_manufacturer,P,N,A,+,1
+9=.P0.0,P,S,A,+,1
-10=.bt_comp,.,N,A,+,1
+10=.system_status,.,N,A,+,1
-11=.raw_adc_temperature,P,N,A,+,1
+11=.battery_manufacturer,P,N,A,+,1
-12=.PM1.7,P,S,A,+,1
+12=.bt_comp,.,N,A,+,1
-13=.P1.7,P,S,A,+,1
+13=.raw_adc_temperature,P,N,A,+,1
-14=.bt_comp,.,N,A,+,1
+14=.PM1.7,P,S,A,+,1
-15=.tasks_immed,P,N,A,+,1
+15=.P1.7,P,S,A,+,1
-16=.vreg_ctr[2],P,N,A,+,1
+16=.bt_comp,.,N,A,+,1
-17=.vreg_twl[3],P,N,A,+,1
+17=.tasks_immed,P,N,A,+,1
-18=.cnt_force_off,P,N,A,+,1
+18=.vreg_ctr[2],P,N,A,+,1
-19=.pool.vreg_c_ext,.,N,A,+,1
+19=.vreg_twl[3],P,N,A,+,1
-20=.p_record,P,N,A,+,1
+20=.cnt_force_off,P,N,A,+,1
-21=.temp_hours,P,N,A,+,1
+21=.pool.vreg_c_ext,.,N,A,+,1
-22=.temp,D,N,A,+,1
+22=.p_record,P,N,A,+,1
-Line=23
+23=.temp_hours,P,N,A,+,1
+24=.temp,P,N,A,+,1
+25=.bt_remain_old,P,N,A,+,1
+Line=26
 [Quick Watch]
-0=battery_manufacturer,P,A,1
+0=system_status,P,A,1
-1=bt_comp,P,A,1
+1=vreg_ctr[11],P,A,1
-2=systemstatus,P,A,1
+2=chg_led_override,P,A,1
-3=system_status,P,A,1
+3=temp_zone_charge_enable,P,A,1
-4=vreg_ctr[11],P,A,1
+4=bt_chg_ready,P,A,1
-5=bt_remain_old,P,A,1
+5=pmk04,P,A,1
-6=chg_led_override,P,A,1
+6=pmk4,P,A,1
-7=temp_zone_charge_enable,P,A,1
+7=pif4,P,A,1
-8=bt_chg_ready,P,A,1
+8=egn0,P,A,1
-9=pmk04,P,A,1
+9=p4.3,P,A,1
-10=pmk4,P,A,1
+10=vreg_ctr,P,A,1
-11=pif4,P,A,1
+11=bt_relax_timer,P,A,1
-12=egn0,P,A,1
+12=temp,P,A,1
-13=p4.3,P,A,1
+13=P0.0,P,A,1
-14=vreg_ctr,P,A,1
+14=PM0.0,P,A,1
-15=bt_relax_timer,P,A,1
+15=bt_remain_old,P,A,1
 [Software Break]
 Geometry=408, 387, 756, 532
 Window=Normal
 Width=150 30 200 100
-Count=0
+Name0=Swb00002
+Address0=pm.c#_BT_get_left+0x56
+Window0=ASM
+Status0=ON
+Name1=Swb00003
+Address1=task_sys.c#_chk_emergencyExit+0x0
+Window1=ASM
+Status1=ON
+Count=2
 [Reset]
 Debugger=ON
 Symbol=OFF

trunk/yav_mcu_bsr.prk

@@ -4,11 +4,17 @@ FrameX=68
 FrameY=16
 FrameCX=1299
 FrameCY=1044
-OpenFile1=OutputWindow
+OpenFile1=bsr_system.h,0,37,276,1281,1033,0,23,0,0
-OutputPos=0,44,989,1000,1587
+OpenFile2=renge\renge_defs.h,0,132,132,1376,889,25,15,25,0
-OpenFile2=pm.c,0,176,176,1420,933,0,1036,0,0
+OpenFile3=renge\\..\jhl_defs.h,0,411,261,1655,1018,10,14,18,0
-OpenFile3=ProjectWindow
+OpenFile4=ProjectWindow
 PrjPos=0,2,754,3,253
+OpenFile5=renge\renge.c,0,198,198,1442,955,0,27,0,0
+OpenFile6=user_define.h,0,242,242,1486,999,0,1,0,0
+OpenFile7=pm.c,0,264,264,1508,1021,0,1021,25,0
+OpenFile8=config.h,0,154,154,1398,911,29,11,0,0
+OpenFile9=OutputWindow
+OutputPos=0,44,989,1000,1587
 ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
 ProjectWindowDispType=0

trunk/yav_mcu_bsr.sdb

@@ -11,7 +11,7 @@ T=4c04abbf
 7=rtc.h
 8=reboot.h
 [pm.c]
-T=4c061888
+T=4c0e00b6
 1=incs.h
 2=adc.h
 3=led.h
@@ -21,11 +21,11 @@ T=4c061888
 7=..\..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
 8=fsl_user.h
 [i2c_ctr.c]
-T=4bfdf8cd
+T=4c072cf1
 1=config.h
 2=incs.h
 [main.c]
-T=4c04d673
+T=4c0cd4a6
 1=incs_loader.h
 2=WDT.h
 3=rtc.h
@@ -35,7 +35,7 @@ T=4c04d673
 7=adc.h
 8=pool.h
 [magic.c]
-T=4c061856
+T=4c0e07ec
 1=config.h
 [WDT.c]
 T=4bf0d1e1
@@ -51,14 +51,14 @@ T=4bfd0d14
 3=i2c_twl_defs.h
 4=i2c_twl.h
 [led.c]
-T=4bfc790f
+T=4c07087d
 1=incs.h
 2=led.h
 [rtc.c]
-T=4c05e92b
+T=4c0cd30b
 1=incs.h
 [vreg_ctr.c]
-T=4c036041
+T=4c0dfc0d
 1=incs.h
 2=vreg_ctr.h
 3=rtc.h
@@ -76,13 +76,13 @@ T=4bfcc957
 4=vreg_twl.h
 5=vreg_ctr.h
 [adc.c]
-T=4c04ade6
+T=4c0e0183
 1=incs.h
 2=adc.h
 3=pm.h
 4=led.h
 [renge\renge.c]
-T=4c04d6fe
+T=4c076060
 1=renge\renge.h
 2=renge\renge_task_intval.h
 3=renge\renge_task_immediate.h
@@ -91,7 +91,7 @@ T=4c04d6fe
 6=user_define.h
 7=bsr_system.h
 [accero.c]
-T=4bfd0c27
+T=4c073982
 1=config.h
 2=incs.h
 3=..\..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
@@ -126,7 +126,7 @@ T=4bfb53e4
 6=i2c_mcu.h
 7=led.h
 [task_sys.c]
-T=4c0604c3
+T=4c0dc8dc
 1=incs.h
 2=i2c_twl.h
 3=i2c_ctr.h
@@ -168,32 +168,32 @@ T=4bf0d1e1
 8=i2c_mcu.h
 9=WDT.h
 [jhl_defs.h]
-T=4bf0d1e0
+T=4c075832
 1=config.h
 [config.h]
-T=4c05fd8e
+T=4c0dfdcf
 [user_define.h]
 T=4c03603c
 [bsr_system.h]
-T=4c060112
+T=4c072dc9
 [renge\renge.h]
-T=4bfdd9d2
+T=4c0758e3
 1=renge\renge_defs.h
 2=renge\renge_task_immediate.h
 [renge\renge_defs.h]
-T=4bf0d1e0
+T=4c073c5a
 [renge\renge_task_immediate.h]
 T=4bf0d1e0
 1=renge\renge_defs.h
 [vreg_ctr.h]
-T=4bfc6650
+T=4c072cf1
 1=config.h
 [vreg_twl.h]
-T=4bfa0ef0
+T=4c072cf1
 [loader.h]
 T=4bf0d1e0
 [i2c_mcu.h]
-T=4bf0d1e0
+T=4c0769e1
 [WDT.h]
 T=4bf0d1e1
 [fsl.h]
@@ -203,13 +203,13 @@ T=4bf0d1e0
 [i2c_ctr.h]
 T=4bf0d1e1
 [pm.h]
-T=4c05daea
+T=4c072cf1
 [rtc.h]
 T=4bf0d1e1
 [reboot.h]
 T=4bf0d1e1
 [incs.h]
-T=4bf6286a
+T=4c072fc8
 1=jhl_defs.h
 2=user_define.h
 3=bsr_system.h
@@ -233,23 +233,23 @@ T=4bfd1372
 T=4bf0d1e1
 1=jhl_defs.h
 [led.h]
-T=4bfb6dbf
+T=4c072cf1
 [batt_params.h]
-T=4bff23c6
+T=4c072cf1
 [i2c_twl_defs.h]
 T=4bf0d1e1
 [renge\renge_task_intval.h]
-T=4bf0d1e0
+T=4c072cf1
 1=renge\renge_defs.h
 [i2c_twl.h]
 T=4bf4e29e
 [sw.h]
-T=4bfcbc5b
+T=4c070c1a
 1=config.h
 [self_flash.h]
 T=4bf0d1e0
 [pool.h]
-T=4c05e88c
+T=4c072cf1
 1=pedometer.h
 [pedo_lpf_coeff.h]
 T=4bf0d1e1