diff --git a/trunk/accero.c b/trunk/accero.c
index 9bf5249..62a9861 100644
--- a/trunk/accero.c
+++ b/trunk/accero.c
@@ -128,12 +128,10 @@ task_status_immed tsk_cbk_accero(  )
             if(( 25 < interval_hh ) && ( interval_hh < 200 ))
             // 前回の極大からの間隔がほどよい
             {
-                DBG_LED_WIFI_on;
                 if( time_l < interval_hh )
                 // 谷を挟んでいる
                 {
                     // 一歩増えました
-                    DBG_LED_WIFI_2_on;
                     hosu_increment();
                 }
             }
@@ -143,8 +141,6 @@ task_status_immed tsk_cbk_accero(  )
         {
             interval_hh += ( interval_hh != 65535 ) ? 1: 0; // 飽和加算って楽に書けたらいいのに
         }
-        DBG_LED_WIFI_off;
-        DBG_LED_WIFI_2_off;
 
         // (2) 直近の極小からの時間
         if( acc_norm[2] >= acc_norm[1] && acc_norm[1] < acc_norm[0]
diff --git a/trunk/adc.c b/trunk/adc.c
index c6b3280..92e30ca 100644
--- a/trunk/adc.c
+++ b/trunk/adc.c
@@ -130,7 +130,7 @@ void tsk_adc(  )
         ADCEN = 1;
         ADM =  0b00011011;      // セレクトモード、章圧、fCLK/6 ///ここから ↓
 
-        ADPC = 0x02;            // ADCポートのセレクト
+        ADPC = 0x06;            // ADCポートのセレクト
         ADS = ADC_SEL_TUNE;
 //    NOP();
         ADCS = 1;               // AD開始。                     /// ここまで　↑　までに1us以上開ける
@@ -252,7 +252,7 @@ u8 get_adc( u8 ch )
     ADCS = 0;
     ADM = 0b00100011;          // セレクトモード、昇圧、fCLK/6  ///ここから↓
 
-    ADPC = 0x02;                // ADCポートのセレクト
+    ADPC = 0x06;                // ADCポートのセレクト
     ADS = ch;
     ADCS = 1;                   // AD開始。                     /// ここまで↑　に、1us以上開ける
 
diff --git a/trunk/bsr_system.h b/trunk/bsr_system.h
index 962cb47..478ead4 100644
--- a/trunk/bsr_system.h
+++ b/trunk/bsr_system.h
@@ -34,7 +34,9 @@ typedef struct
 }
 system_status_;
 
+
 extern system_status_ system_status;
 
 
+
 #endif
diff --git a/trunk/config.h b/trunk/config.h
index d2cef04..94db6f8 100644
--- a/trunk/config.h
+++ b/trunk/config.h
@@ -2,7 +2,7 @@
 #define __config__
 
 #define _debug_
-//#define _debug_led_
+#define _debug_led_
 
 
 #define MCU_VER_MAJOR    0x00;
@@ -14,9 +14,9 @@
 //#define _PM_BUG_
 
 //#define _PARRADIUM_
-#define _MODEL_TEG2_
+//#define _MODEL_TEG2_
 //#define _MODEL_WM0_
-//#define _MODEL_TS0_
+#define _MODEL_TS0_
 //#define _MODEL_CTR_
 
 //#define _SW_HOME_ENABLE_
diff --git a/trunk/led.c b/trunk/led.c
index 9c141bd..baa3102 100644
--- a/trunk/led.c
+++ b/trunk/led.c
@@ -60,7 +60,12 @@ void LED_init(  )
         << BIT_CIS0 | 4 << BIT_MD123 | 1 << BIT_MD0;
     ISC = 0;
     TOM0 = 0b0000000011111110; // 出力モード。4はPWM出力しないが1にしないとTO5以降にクロックが届かない
+
+#ifdef _MCU_BSR_
     TOL0 = 0b0000000000000000; // 出力を反転させるかフラグ
+#else
+    TOL0 = 0b0000000000000100; // 出力を反転させるかフラグ
+#endif
 
     TO0 = 0;                    // タイマー動作中で、タイマー出力にしてないときのピンのラッチ。タイマー出力を使わないなら０
     TOE0 = 0b0000000011101110; // TOxをタイマーモジュールが制御？
@@ -336,7 +341,6 @@ void tsk_led_wifi(  )
         LED_duty_WiFi = 0;
         state_wifi_tx = 0;
         remain_wifi_tx = 0;
-        LED_WIFI_2 = 0;
         break;
 
     case ( WIFI_LED_ON ):
@@ -344,7 +348,6 @@ void tsk_led_wifi(  )
         LED_duty_WiFi = vreg_ctr[VREG_C_LED_BRIGHT];
         state_wifi_tx = 0;
         remain_wifi_tx = 0;
-        LED_WIFI_2 = 1;
         break;
 
     case ( WIFI_LED_TXAUTO ):
@@ -359,11 +362,9 @@ void tsk_led_wifi(  )
             case ( 3 ):
             case ( 5 ):
                 LED_duty_WiFi = 0;
-                LED_WIFI_2 = 0;
                 break;
             default:
                 LED_duty_WiFi = vreg_ctr[VREG_C_LED_BRIGHT];
-                LED_WIFI_2 = 1;
             }
             state_wifi_tx++;
             if( state_wifi_tx == 32 )
@@ -378,7 +379,6 @@ void tsk_led_wifi(  )
         else
         {
             LED_duty_WiFi = vreg_ctr[VREG_C_LED_BRIGHT];
-            LED_WIFI_2 = 1;
             task_interval = 200;
             return;
         }
@@ -386,7 +386,6 @@ void tsk_led_wifi(  )
 
     case ( WIFI_LED_PTN0 ):
         // ゆっくりバースト
-        LED_WIFI_2 = 1;
         switch ( state_wifi_tx )
         {
         case ( 1 ):
@@ -407,7 +406,6 @@ void tsk_led_wifi(  )
 
     case ( WIFI_LED_PTN1 ):
         // データテーブルに従って点滅
-        LED_WIFI_2 = 1;
         {
             u8      dat;
 
diff --git a/trunk/loader.c b/trunk/loader.c
index e7c5cda..e00293e 100644
--- a/trunk/loader.c
+++ b/trunk/loader.c
@@ -229,7 +229,7 @@ void hdwinit2(  )
 #ifdef _MODEL_CTR_
     PM2 = 0b11101000;
 #else
-    PM2 = 0b11111111;
+    PM2 = 0b11101111;
 #endif
     PM3 = 0b11110000;          // P31,32は簡易I2C
 
diff --git a/trunk/pm.c b/trunk/pm.c
index d8ec29a..53ed049 100644
--- a/trunk/pm.c
+++ b/trunk/pm.c
@@ -79,7 +79,7 @@ void PM_init(  )
 
     // -1. なんかおかしい…　リセットをかけてみる
     dat_16._u16 = swap_endian_16( 0x5400 ); // reset
-    iic_mcu_write( IIC_SLA_BT_GAUGE, BT_GAUGE_REG_COMMAND, 2, &dat_16.chars.lsb );
+    iic_mcu_write( IIC_SLA_BT_GAUGE, BT_GAUGE_REG_COMMAND, 2, &dat_16 );
 
     // 0. バッテリ残量IC クイックスタート
     dat_16._u16 = swap_endian_16( 0x4000 ); // quick start
@@ -483,6 +483,7 @@ err PM_sys_pow_on(  )
 
     // 残量チェック
     PM_get_batt_left();         // 先に、PM_init()が実行されている必要があります。(大丈夫)
+    // todo: batt remain -> volatage?
     if( vreg_ctr[VREG_C_BT_REMAIN] < 0 )
     {
         return ( 1 );
diff --git a/trunk/renge/renge.c b/trunk/renge/renge.c
index 257a159..1659293 100644
--- a/trunk/renge/renge.c
+++ b/trunk/renge/renge.c
@@ -16,6 +16,7 @@
 
 #include "..\WDT.h"
 #include "..\config.h"
+#include "..\user_define.h"
 
 //******************************************************************************
 bit renge_flg_interval;
@@ -122,86 +123,61 @@ for( i = 0; i < IMMED_RSV_TASKS_NUM; i++ ){
 
 
 /**************************************
+ 本当にクリティカルなタイミングだと
+タスクの順番が入れ替わるけど滅多に起きないであろう事、
+多くの場合は順番が入れ替わっても問題ないので
+割り込み禁止を最小にすることを最優先
+（immedの否定...）
+割り込み禁止 36us → 
  **************************************/
 err renge_task_immed_add( task_immed new_task ){
-static u8 lock = 0;
-
-  DI();
-  if( lock != 0 ){
-    while(1){
-      NOP();
-    }
-  }
-  lock = 1;
+    u8 i;
+    u8 place;
 
   // 末尾の連続した空き領域の先頭でかつ、
   // 重複登録を避ける
-    {
-      u8 i;
-      u8 place;
-
-      for( i = place = 0; i < IMMED_RSV_TASKS_NUM; i += 1 )
-      {
-        if( tasks_immed[ i ] != ( void * )0 )
-        {
-            place = i+1;
-        }
-        if( tasks_immed[ i ] == new_task )  // 重複登録
-        {
-    //          while(1){
-          NOP();  // アサートで止めたい
-    //          }
-          lock = 0;
-          EI();
-          return( ERR_ERR );
-        }
-        }
-        if( place < IMMED_RSV_TASKS_NUM )
-        {
-            tasks_immed[ place ] = new_task;
-        }
-        else
-        {                                   // タスク登録しすぎ(無いはず
-    //          while(1){
-          NOP();  // アサートで止めたい
-    //          }
-          lock = 0;
-          EI();
-          return( ERR_ERR );
-        }
-    }
-
-
-    lock = 0;
-    EI();
-    return( ERR_SUCCESS );
-}
-
-
-
-/**************************************
- **************************************/
-static void renge_task_immed_del(){
-  u8 i,j;
-
-  // リスト前詰め
-  i = 0;
-  j = 1;
-  for( ; j < IMMED_RSV_TASKS_NUM; j++)
+  for( i = place = 0; i < IMMED_RSV_TASKS_NUM; i += 1 )
   {
-      if( tasks_immed[ i ] == (void *)0 )
+      if( tasks_immed[ i ] != ( void * )0 )
       {
-          if( tasks_immed[ j ] != (void *)0 )
+          place = i+1;      // 最近見つけた、タスクリストの最後尾
+      }
+      if( tasks_immed[ i ] == new_task )  // 重複登録
+      {
+    //          while(1){
+          NOP();  // アサートで止めたい
+    //          }
+          return( ERR_ERR );
+      }
+  }
+
+  if( place > IMMED_RSV_TASKS_NUM )
+  {                         // タスク登録しすぎ(無いはず
+      //          while(1){
+      NOP();  // アサートで止めたい
+      //
+      return( ERR_ERR );
+  }
+  else
+  {
+      DI();
+      DBG_LED_WIFI_2_on;
+      // もたもたしているうちに割り込み等から割り込まれるのを考慮
+      // 滅多にないはずだが
+      for( ; place < IMMED_RSV_TASKS_NUM; place += 1 )
+      {
+          if( tasks_immed[ place ] == ( void * )0 )
           {
-              tasks_immed[ i ] = tasks_immed[ j ];
-              tasks_immed[ j ] = (void *)0;
-              i += 1;
+              tasks_immed[ place ] = new_task;
+              DBG_LED_WIFI_2_off;
+              EI();
+              return( ERR_SUCCESS );
           }
       }
-      else
-      {
-          i += 1;
-      }
+      // 割り込まれてタスク登録できなくなった
+      DBG_LED_WIFI_2_off;
+      EI();
+      return( ERR_ERR );
   }
 }
 
@@ -210,32 +186,58 @@ static void renge_task_immed_del(){
  **************************************/
 err renge_task_immed_run(){
   u8 task_id;
-  u8 i;
+  u8 last_task;
 
   do{
-  i = 0;
+      last_task = 0xFF;
 
-  for( task_id = 0; task_id < IMMED_RSV_TASKS_NUM; task_id += 1 ){
-    if( tasks_immed[ task_id ] != 0 ){
-      if( tasks_immed[ task_id ]() == ERR_FINISED ){
-        tasks_immed[ task_id ] = (void*)0;
+      for( task_id = 0; task_id < IMMED_RSV_TASKS_NUM; task_id += 1 ){
+          if( tasks_immed[ task_id ] != 0 ){
+              if( tasks_immed[ task_id ]() == ERR_FINISED ){
+                  tasks_immed[ task_id ] = (void*)0;
+                  last_task = task_id;
+              }
+          }
       }
-    }
-  }
 
-  DI();
-  renge_task_immed_del();
-  EI();
+      // タスク削除
+      {
+          if( last_task != 0xFF )
+          {
+              u8 i,j;
 
-  // さらに登録されたり、再度実行の場合
-  // todo エラー繰り返しまくりだと困る
-  for( task_id = 0; task_id < IMMED_RSV_TASKS_NUM; task_id += 1 ){
-      if( tasks_immed[ task_id ] != 0 ){
-          i += 1;
+              // リスト前詰め
+              i = 0;
+              j = 1;
+              for( ; j < IMMED_RSV_TASKS_NUM; j++)
+              {
+                  DI();
+      DBG_LED_WIFI_2_on;
+                  if( tasks_immed[ i ] == (void *)0 )
+                  {
+                      if( tasks_immed[ j ] != (void *)0 )
+                      {
+                          tasks_immed[ i ] = tasks_immed[ j ];
+                          tasks_immed[ j ] = (void *)0;
+                          i += 1;
+                      }
+                  }
+                  else
+                  {
+                      i += 1;
+                  }
+              DBG_LED_WIFI_2_off;
+                  EI();
+                  if( last_task < i )
+                  {
+                      break;
+                  }
+              }
+          }
       }
-  }
 
-  }while( i != 0 );
+  }
+  while( last_task != 0xFF );  // タスクが残っていたら再実行
 
 
 
@@ -272,8 +274,6 @@ err renge_task_immed_run(){
 
 
 
-
-
 /******************************************************************************
   単位は ms
   NOPを回すだけ、指定時間CPUを *占有します* 。
diff --git a/trunk/rtc.c b/trunk/rtc.c
index a88dcb0..fe1123d 100644
--- a/trunk/rtc.c
+++ b/trunk/rtc.c
@@ -20,7 +20,7 @@ bit     rtc_alarm_dirty;
  レジスタの電池交換ビットのセット
  ======================================================== */
 void RTC_init( void )
-{
+{ 
 
     if( !RTCEN )            // ビットが立っていたらリブート
     {
diff --git a/trunk/task_debug.c b/trunk/task_debug.c
index 6a884fe..aab1702 100644
--- a/trunk/task_debug.c
+++ b/trunk/task_debug.c
@@ -41,6 +41,8 @@ void tsk_debug2(  )
 {
     u8      str[4];
 
+    return;
+
     if( ( system_status.pwr_state == ON ) || ( system_status.pwr_state == SLEEP ) )
     {
 /*
diff --git a/trunk/user_define.h b/trunk/user_define.h
index bc5eacf..a24a4c8 100644
--- a/trunk/user_define.h
+++ b/trunk/user_define.h
@@ -1,8 +1,6 @@
 #ifndef _USER_DEF_
 #define _USER_DEF_
 
-#include "config.h"
-
 
 #define IIC_SLV_ADDR_MONITOR 0x6E
 #define IIC_T_SLAVEADDRESS	0x4A
@@ -27,9 +25,9 @@
 #ifdef _debug_led_
 #define DBG_LED_WIFI_on        ( P1.1 = 1 )     // TO03
 #define DBG_LED_WIFI_off       ( P1.1 = 0 )     // TO03
-#define DBG_LED_WIFI_2_on      ( LED_WIFI_2 = 1 )
-#define DBG_LED_WIFI_2_off     ( LED_WIFI_2 = 0 )
-#define DBG_LED_WIFI_2_toggle  ( LED_WIFI_2 ^= 1 )
+#define DBG_LED_WIFI_2_on      ( P2.4 = 1 )
+#define DBG_LED_WIFI_2_off     ( P2.4 = 0 )
+#define DBG_LED_WIFI_2_toggle  ( P2.4 ^= 1 )
 
 #else
 #define DBG_LED_WIFI_on        ;
@@ -151,7 +149,6 @@
 //#define LED_CHARGE         P1.3      // TO05
 //#define LED_POW2           P1.4      // TO06 ( 青 )
 //#define LED_POW1           P1.5      // TO07 ( 赤 )
-#define LED_WIFI_2           P2.4
 
 #define I2C_PU               P5.3
 //#define I2C_M_SDA            P3.1      // SDA10
diff --git a/trunk/vreg_ctr.c b/trunk/vreg_ctr.c
index 29faa17..2ff2c1d 100644
--- a/trunk/vreg_ctr.c
+++ b/trunk/vreg_ctr.c
@@ -331,7 +331,7 @@ void set_irq( u8 irqreg, u8 irq_flg )
 {
     u8 tot;   // IRQ_mcu がLに縛られてると困る(基板不良)
 
-    DI();
+  DI();
     if( ( vreg_ctr[ irqreg + 8 ] & irq_flg ) == 0 ){
         vreg_ctr[ irqreg ] |= irq_flg;
         IRQ0_neg;
diff --git a/trunk/yav_mcu_bsr.plg b/trunk/yav_mcu_bsr.plg
index ed232dd..c3fd34d 100644
--- a/trunk/yav_mcu_bsr.plg
+++ b/trunk/yav_mcu_bsr.plg
@@ -1,7 +1,12 @@
 C:\WINDOWS\system32\cmd.exe /c touch magic.c
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -cF100964 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no magic.c
+"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -cF100964 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
+Assembly complete,     0 error(s) and     0 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no renge\renge.c
+renge\renge.c(143) : CC78K0R warning W0401: Conversion may lose significant digits
+Compilation complete,    0 error(s) and    1 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\renge.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb6EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel reboot.rel sw.rel task_debug.rel task_misc.rel task_sys.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
@@ -13,4 +18,4 @@ intel-HEX to bsr bin converter
  file converted!
 
 
-Build Total error(s) : 0  Total warning(s) : 0 
+Build Total error(s) : 0  Total warning(s) : 1 
diff --git a/trunk/yav_mcu_bsr.pri b/trunk/yav_mcu_bsr.pri
index 4520422..192d30d 100644
--- a/trunk/yav_mcu_bsr.pri
+++ b/trunk/yav_mcu_bsr.pri
@@ -2,9 +2,9 @@
 Ver=200
 Target=IDK0R32G
 [Configuration]
-Chip=uPD78F1009_64
-Internal Rom=64KB
-Internal Ram=3072B
+Chip=uPD79F0104
+Internal Rom=32KB
+Internal Ram=1536B
 Clock=Target
 Sub Clock=Target
 Peripheral Break=0x2
@@ -23,7 +23,7 @@ SubClock=None
 Count=0
 [Main]
 Geometry=66, 66, 1467, 1110
-Window=Max
+Window=Normal
 MDI_MAX=OFF
 Button=ON
 Mode=Auto
@@ -78,7 +78,7 @@ Symbol Type=OFF
 Language=C
 Kanji=SJIS
 [Source]
-Geometry=135, 77, 904, 1014
+Geometry=135, 77, 974, 1014
 Window=Normal
 DispStart=31
 CaretPos=87,0
@@ -142,16 +142,56 @@ Accumulative=ON
 [Source1]
 Geometry=0, 0, 904, 1014
 Window=Normal
-DispStart=320
-CaretPos=1,0
+DispStart=318
+CaretPos=319,0
 Mode=Normal
 DispFile=pm.c
 Accumulative=ON
+[Source2]
+Geometry=0, 0, 904, 1014
+Window=Normal
+DispStart=159
+CaretPos=160,0
+Mode=Normal
+DispFile=pm.c
+Accumulative=ON
+[Source3]
+Geometry=25, 25, 904, 1014
+Window=Normal
+DispStart=24
+CaretPos=25,0
+Mode=Normal
+DispFile=vreg_twl.c
+Accumulative=ON
+[Source4]
+Geometry=50, 50, 904, 1014
+Window=Normal
+DispStart=271
+CaretPos=272,0
+Mode=Normal
+DispFile=vreg_ctr.c
+Accumulative=ON
+[Source5]
+Geometry=75, 75, 904, 1014
+Window=Normal
+DispStart=115
+CaretPos=116,0
+Mode=Normal
+DispFile=task_misc.c
+Accumulative=ON
+[Source6]
+Geometry=0, 0, 974, 1014
+Window=Normal
+DispStart=72
+CaretPos=143,0
+Mode=Normal
+DispFile=vreg_ctr.c
+Accumulative=ON
 [Assemble]
 Geometry=605, 2, 600, 400
 Window=Normal
-DispStart=674
-CaretPos=674,27
+DispStart=687
+CaretPos=687,27
 Address1=
 Address2=
 Address3=
@@ -866,41 +906,43 @@ Count=0
 Geometry=1145, 8, 440, 1086
 Window=Normal
 Boundary=13762700
-0=.blset,P,N,A,+,1
-1=.blset,P,N,A,+,1
-2=.pool,P,N,A,+,1
-3=.hyst_pedometer,.,N,A,+,1
-4=.P5.3,P,S,A,+,1
-5=.PM5.3,P,S,A,+,1
-6=.RTCEN,P,S,A,+,1
-7=.tasks_immed,P,N,A,+,1
-8=.system_status,.,N,A,+,1
-9=.hyst_pedometer,.,N,A,+,1
-10=.pool,P,N,A,+,1
-11=.last_year,P,N,A,+,1
-12=.last_month,P,N,A,+,1
-13=.last_day,P,N,A,+,1
-14=.last_hour,P,N,A,+,1
-15=.p_record,P,N,A,+,1
-16=.vreg_ctr[0x60],P,N,A,+,1
-Line=17
+0=.data,P,N,A,+,1
+1=.vreg_twl,P,N,A,+,1
+2=.blset,P,N,A,+,1
+3=.blset,P,N,A,+,1
+4=.pool,P,N,A,+,1
+5=.hyst_pedometer,.,N,A,+,1
+6=.P5.3,P,S,A,+,1
+7=.PM5.3,P,S,A,+,1
+8=.RTCEN,P,S,A,+,1
+9=.tasks_immed,P,N,A,+,1
+10=.system_status,.,N,A,+,1
+11=.hyst_pedometer,.,N,A,+,1
+12=.pool,P,N,A,+,1
+13=.last_year,P,N,A,+,1
+14=.last_month,P,N,A,+,1
+15=.last_day,P,N,A,+,1
+16=.last_hour,P,N,A,+,1
+17=.p_record,P,N,A,+,1
+18=.vreg_ctr[0x60],P,N,A,+,1
+Line=19
 [Quick Watch]
-0=last_hour,P,A,1
-1=last_day,P,A,1
-2=last_month,P,A,1
-3=last_year,P,A,1
-4=p_record,P,A,1
-5=vreg_ctr,P,A,1
-6=vreg_ctr[0x60],P,A,1
-7=RTCEN,P,A,1
-8=system_status,P,A,1
-9=tasks_immed,P,A,1
-10=PM5.3,P,A,1
-11=P5.3,P,A,1
-12=hyst_pedometer,P,A,1
-13=pool,P,A,1
-14=blset,P,A,1
-15=
+0=last_day,P,A,1
+1=last_month,P,A,1
+2=last_year,P,A,1
+3=p_record,P,A,1
+4=vreg_ctr,P,A,1
+5=vreg_ctr[0x60],P,A,1
+6=RTCEN,P,A,1
+7=system_status,P,A,1
+8=tasks_immed,P,A,1
+9=PM5.3,P,A,1
+10=P5.3,P,A,1
+11=hyst_pedometer,P,A,1
+12=pool,P,A,1
+13=blset,P,A,1
+14=vreg_twl,P,A,1
+15=data,P,A,1
 [Software Break]
 Geometry=25, 25, 500, 428
 Window=Normal
@@ -914,14 +956,10 @@ Address1=accero.c#_hosu_increment+0x52
 Window1=ASM
 Status1=ON
 Name2=Swb00006
-Address2=pm.c#es_F0132+0x38
+Address2=pm.c#_PM_init+0x38
 Window2=ASM
 Status2=OFF
-Name3=Swb00003
-Address3=pm.c#_PM_BL_set+0x51
-Window3=ASM
-Status3=ON
-Count=4
+Count=3
 [Reset]
 Debugger=ON
 Symbol=OFF
diff --git a/trunk/yav_mcu_bsr.prj b/trunk/yav_mcu_bsr.prj
index 1e199c5..fdb8c23 100644
--- a/trunk/yav_mcu_bsr.prj
+++ b/trunk/yav_mcu_bsr.prj
@@ -3,8 +3,8 @@ Version=6.00
 Path=C:\78k_data\yav-mcu-basara\
 Title=yav-mcu
 Series=78K0R.PM
-Device=uPD78F1009_64
-DeviceVer=V1.11
+Device=uPD79F0104
+DeviceVer=E1.00b
 DebugMode=1
 Target=C:\78k_data\yav-mcu-basara\bsr.lmf
 [BuildMode0]
diff --git a/trunk/yav_mcu_bsr.prk b/trunk/yav_mcu_bsr.prk
index b5330bf..8bbb066 100644
--- a/trunk/yav_mcu_bsr.prk
+++ b/trunk/yav_mcu_bsr.prk
@@ -10,11 +10,12 @@ OpenFile3=bsr_mcu.dr,0,198,198,1177,834,0,54,0,0
 OpenFile4=adc.c,0,220,220,1199,856,0,112,0,0
 OpenFile5=loader.c,0,266,31,1510,788,23,43,23,0
 OpenFile6=sw.c,0,132,132,1376,889,0,166,17,0
-OpenFile7=pm.c,0,421,154,1400,790,45,281,35,0
-OpenFile8=OutputWindow
-OutputPos=0,229,1000,411,1513
-OpenFile9=config.h,0,286,286,1530,1043,0,17,19,0
-OpenFile10=ProjectWindow
+OpenFile7=pm.c,0,421,154,1400,790,25,271,0,0
+OpenFile8=config.h,0,282,262,1526,1019,0,17,19,0
+OpenFile9=ProjectWindow
 PrjPos=0,2,754,3,253
+OpenFile10=OutputWindow
+OutputPos=0,229,1000,411,1513
+ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
 ProjectWindowDispType=0
diff --git a/trunk/yav_mcu_bsr.sdb b/trunk/yav_mcu_bsr.sdb
index df22438..be292b5 100644
--- a/trunk/yav_mcu_bsr.sdb
+++ b/trunk/yav_mcu_bsr.sdb
@@ -11,7 +11,7 @@ T=4b1efd24
 7=rtc.h
 8=reboot.h
 [pm.c]
-T=4b26ee13
+T=4b2f0666
 1=incs.h
 2=adc.h
 3=led.h
@@ -30,7 +30,7 @@ T=4b25f14b
 6=led.h
 7=adc.h
 [magic.c]
-T=4b261749
+T=4b2b2791
 1=config.h
 [WDT.c]
 T=4afd21ca
@@ -47,7 +47,7 @@ T=4b03aa74
 T=4afd21ca
 1=config.h
 [led.c]
-T=4b0499ab
+T=4b2f279a
 1=incs.h
 2=led.h
 [rtc.c]
@@ -113,7 +113,7 @@ T=4b14e842
 3=pm.h
 4=accero.h
 [task_misc.c]
-T=4b0b8f86
+T=4b277423
 1=incs.h
 2=renge\renge.h
 3=pm.h
@@ -146,7 +146,7 @@ T=4b023fdb
 T=4b1cdaa0
 1=config.h
 [config.h]
-T=4b2615c6
+T=4b2f27c7
 [bsr_system.h]
 T=4afd21ca
 [renge\renge.h]
@@ -159,7 +159,7 @@ T=4b024862
 T=4afa8168
 1=renge\renge_defs.h
 [vreg_ctr.h]
-T=4b25ede2
+T=4b277ab7
 1=config.h
 [loader.h]
 T=4afd21ca