diff --git a/trunk/adc.c b/trunk/adc.c
index 8a5adbb..502eb33 100644
--- a/trunk/adc.c
+++ b/trunk/adc.c
@@ -11,6 +11,10 @@
 
 bit     adc_updated;
 
+u8 adc_raw_vol;
+u8 adc_raw_dep;
+
+
 
 #define INTERVAL_TSK_ADC  16
 /* ========================================================
@@ -64,49 +68,49 @@ void tsk_adc(  )
         if( system_status.pwr_state == ON )
         {
             // Tune ///////////////////////////////////////
-#if 0
-            tune 変化では割り込みを入れない
-                // tune
-                if( abs( old_tune - vreg_ctr[VREG_TUNE] ) >= 4 )
             {
-                old_tune = vreg_ctr[VREG_TUNE];
-                vreg_ctr[VREG_C_IRQ0] |= REG_BIT_VR_TUNE_CHANGE;
-                if( ( vreg_ctr[VREG_C_IRQ_MASK0] & REG_BIT_VR_TUNE_CHANGE ) == 0 )
+                // 似非ヒステリシスを付けて64段
+                static u8 old_value;
+                u8        temp;
+
+                if( abs( adc_raw_dep - old_value ) >= 2 )
                 {
-                    IRQ0_ast;
-                }
-            }
+                    vreg_ctr[ VREG_C_TUNE ] = ( adc_raw_dep & 0xFC );
+                    old_value = adc_raw_dep;
+#if 0
+                    割り込み入れない;
+                    割り込みを入れるようであれば、ちゃんと変化チェックする;
+                    
+                    set_irq( VREG_C_IRQ0, REG_BIT_VR_TUNE_CHANGE );
 #endif
+                    vreg_ctr[ VREG_C_DBG1 ] = vreg_ctr[ VREG_C_TUNE ];
+                }
+                vreg_ctr[ VREG_C_DBG2 ] = adc_raw_dep;  // dbg
+            }
 
             // Volume /////////////////////////////////////
             {
+                // 似非ヒステリシスを付けて64段
                 static u8 vol_old;
-                static u8 class_old;
-                static u8 hysterisis_vol;
-                u16      class;
+                u8        temp;
 
-//                // ヒステリシスを付けておく。上に抜けた場合に閾値を少し下げることにする
-//                hysterisis_vol = ( vol_old <= vreg_ctr[VREG_C_SND_VOL] )? 2: 0;
-//                vol_old = vreg_ctr[VREG_C_SND_VOL];
+                if( abs( adc_raw_vol - vol_old ) >= 2 )
+                {
+                    temp = slider_to_codec[ adc_raw_vol / 4 ];
 
-                /*
-                class = ( vreg_ctr[VREG_C_SND_VOL] + hysterisis_vol ) / ( 256 / 8 ); // 32段の割り込み
-                if( class != class_old )
-                {
-                    class_old = class;
-                    set_irq( VREG_C_IRQ0, REG_BIT_VR_SNDVOL_CHANGE );
-                }
-*/
-                // デバイスに伝える
-                if( sndvol_codec != vreg_ctr[VREG_C_SND_VOL] )
-                {
-                    sndvol_codec = vreg_ctr[VREG_C_SND_VOL];
-                    // DCPにも伝えておく
-                    iic_mcu_write_a_byte( IIC_SLA_DCP, 0,
-                                          slider_to_codec[ sndvol_codec/4 ] );
-                    // codecに伝える
-                    iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL,
-                                          slider_to_codec[ sndvol_codec/4 ] );
+                    if( vreg_ctr[ VREG_C_SND_VOL ] != temp )
+                    {
+                        vol_old = adc_raw_vol;
+                        // レジスタ更新
+                        vreg_ctr[ VREG_C_SND_VOL ] = temp;
+                        vreg_twl[ REG_TWL_INT_ADRS_VOL ] = adc_raw_vol / ( 256 / 32 );  // ←adc値でよい
+
+                        // codecに伝える
+                        iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL, temp );
+                        iic_mcu_write_a_byte( IIC_SLA_DCP, 0, temp );  // todo
+
+                        set_irq( VREG_C_IRQ0, REG_BIT_VR_SNDVOL_CHANGE );
+                    }
                 }
             }
 
@@ -212,18 +216,17 @@ case ( ADC_SEL_AMB_BRIT ):
     case ( ADC_SEL_TUNE ):
         hist_tune[index] = ADCRH;
 #ifdef _MODEL_WM0_
-        vreg_ctr[ VREG_C_TUNE ] = 255 - getmean3( hist_tune );
+        adc_raw_dep = 255 - getmean3( hist_tune );
 #else
-        vreg_ctr[ VREG_C_TUNE ] = getmean3( hist_tune );
+        adc_raw_dep = getmean3( hist_tune );
 #endif
         break;
 
     case ( ADC_SEL_VOL ):
         hist_snd_vol[index] = ADCRH;
-        vreg_ctr[VREG_C_SND_VOL] = getmean3( hist_snd_vol );
-        // TWL用レジスタの更新
-        vreg_twl[ REG_TWL_INT_ADRS_VOL ] = vreg_ctr[VREG_C_SND_VOL] / ( 256 / 32 ); // 8段の割り込み
-        // 割り込みはHorizonを通してコマンドを発行されるのを待てばよい
+        adc_raw_vol = getmean3( hist_snd_vol );
+        // TWL用レジスタ(32段)の更新。アトミックな処理として扱わないと不都合が。
+        /// 割り込みはHorizonを通してコマンドを発行されるのを待てばよい
         break;
 
     case ( ADC_SEL_BATT_TEMP ):
@@ -240,7 +243,7 @@ case ( ADC_SEL_AMB_BRIT ):
 
 
 // もっとまともな書き方がありそうだ
-// if( ADS == ADC_SEL_BATT_DET ){b
+// if( ADS == ADC_SEL_BATT_DET ){
     if( ADS != ADC_SEL_BATT_TEMP )
     {                           // 電池判別は電源投入の一回のみ
         ADS += 1;               // 次のチャンネル
diff --git a/trunk/config.h b/trunk/config.h
index d6cec3d..33ffb13 100644
--- a/trunk/config.h
+++ b/trunk/config.h
@@ -6,7 +6,7 @@
 
 
 #define MCU_VER_MAJOR    0x00
-#define MCU_VER_MINOR    0x0D
+#define MCU_VER_MINOR    0x0E
 
 #define _OVERCLOCK_
 
@@ -17,8 +17,8 @@
 
 //#define _PARRADIUM_
 //#define _MODEL_TEG2_
-//#define _MODEL_WM0_
-#define _MODEL_TS0_
+#define _MODEL_WM0_
+//#define _MODEL_TS0_
 //#define _MODEL_CTR_
 
 //#define _SW_HOME_ENABLE_
diff --git a/trunk/pm.c b/trunk/pm.c
index dc9a76f..877de4b 100644
--- a/trunk/pm.c
+++ b/trunk/pm.c
@@ -357,17 +357,18 @@ SoC
             vreg_ctr[ VREG_C_IRQ3 ] |= ( intset & ~vreg_ctr[ VREG_C_IRQ_MASK3 ] );
             IRQ0_neg;
             tot = 0;
-            while( !IRQ0 && ( ++tot != 0 ) ){;}
+            while( !IRQ0 && ( ++tot != 0 ) ){;}  // 割り込みを入れ直す
             IRQ0_ast;
         }
     }
 
 // Write
-    wait_ms( 10 );
-    iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_BL, blset );
-    if( blset != 0x00 ){
-//        wait_ms( 10 );
+    if( blset != 0 )  // BLを付ける場合はウェイトを挟まないとPWMが来ておらず
+                      /// シャットダウンすることがある
+    {
+        wait_ms( 10 );
     }
+    iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_BL, blset );
 
     return( ERR_SUCCESS );         // ここでは異常チェック不要
 }
@@ -507,7 +508,7 @@ err PM_sys_pow_on(  )
     wait_ms( 100 );
     {  // CODEC 不定レジスタ初期化
         u8 codec_reg_init[3] = { 0,0,0 };
-        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init ); 
+        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init );
     }
 */
 #else
@@ -546,7 +547,7 @@ err PM_sys_pow_on(  )
 /*
     {  // CODEC 不定レジスタ初期化
         u8 codec_reg_init[3] = { 0,0,0 };
-        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init ); 
+        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init );
     }
 */
 #endif
@@ -780,6 +781,16 @@ task_status_immed ntr_pmic_comm(  )
         }
     }
 
+    // テストコード ↓ //
+        // バックライト設定
+        /// 今のところさらに細かくは分けないけど…
+        if( ( reg_shadow & ( REG_BIT_TWL_REQ_BL_U | REG_BIT_TWL_REQ_BL_U ) ) == 0 )
+        {
+//            vreg_ctr[ VREG_C_COMMAND2 ] = ( REG_BIT_CMD_BL_U_OFF | REG_BIT_CMD_BL_U_OFF );
+//            renge_task_immed_add( tski_PM_BL_set );
+        }
+
+
     // offリクエスト //////////////////////////////////////
     if( ( reg_shadow & REG_BIT_TWL_REQ_OFF_REQ ) != 0 )
     {
@@ -799,8 +810,11 @@ task_status_immed ntr_pmic_comm(  )
 
     // バックライトをマスクして書き戻す
     EI(  );
-    reg_shadow &= ~( REG_BIT_TWL_REQ_OFF_REQ | REG_BIT_TWL_REQ_RST_REQ );
-    iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_PM, reg_shadow );
+    if( ( reg_shadow & ( REG_BIT_TWL_REQ_OFF_REQ | REG_BIT_TWL_REQ_RST_REQ )) != 0 )
+    {
+        reg_shadow &= ~( REG_BIT_TWL_REQ_OFF_REQ | REG_BIT_TWL_REQ_RST_REQ );
+        iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_PM, reg_shadow );
+    }
     return ( ERR_FINISED );
 }
 
diff --git a/trunk/task_debug.c b/trunk/task_debug.c
index 51b1b4d..935930f 100644
--- a/trunk/task_debug.c
+++ b/trunk/task_debug.c
@@ -51,7 +51,7 @@ void tsk_debug2(  )
 */
         str[3] = vreg_ctr[ VREG_C_DBG1 ];
         str[2] = vreg_ctr[ VREG_C_DBG2 ];
-        str[1] = vreg_ctr[ VREG_C_DBG3 ];
+        str[1] = vreg_ctr[ VREG_C_IRQ2 ];
 //        str[1] = MIN;
         str[0] = SEC;
 
diff --git a/trunk/vreg_ctr.h b/trunk/vreg_ctr.h
index 90b86b3..899280c 100644
--- a/trunk/vreg_ctr.h
+++ b/trunk/vreg_ctr.h
@@ -36,7 +36,7 @@
 
 
 //  VREG_C_IRQ0
-//#define REG_BIT_VR_SNDVOL_CHANGE    ( 1 << 7 )
+#define REG_BIT_VR_SNDVOL_CHANGE    ( 1 << 7 )
 #define REG_BIT_SHELL_OPEN          ( 1 << 6 )
 #define REG_BIT_SHELL_CLOSE         ( 1 << 5 )
 #define REG_BIT_SW_WIFI_CLICK       ( 1 << 4 )
diff --git a/trunk/yav_mcu_bsr.plg b/trunk/yav_mcu_bsr.plg
index f313cc8..dc61d1d 100644
--- a/trunk/yav_mcu_bsr.plg
+++ b/trunk/yav_mcu_bsr.plg
@@ -1,26 +1,8 @@
 C:\WINDOWS\system32\cmd.exe /c touch magic.c
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no pm.c
-pm.c(167) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(178) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(182) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(233) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(270) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(349) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(357) : CC78K0R warning W0401: Conversion may lose significant digits
-pm.c(839) : CC78K0R warning W0401: Conversion may lose significant digits
-Compilation complete,    0 error(s) and    8 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\pm.asm
-Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no task_misc.c
-task_misc.c(48) : CC78K0R warning W0401: Conversion may lose significant digits
-task_misc.c(34) : CC78K0R warning W0401: Conversion may lose significant digits
-Compilation complete,    0 error(s) and    2 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\task_misc.asm
-Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb7EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel reboot.rel sw.rel task_debug.rel task_misc.rel task_sys.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex -nu -ki  bsr.lmf
@@ -31,4 +13,4 @@ intel-HEX to bsr bin converter
  file converted!
 
 
-Build Total error(s) : 0  Total warning(s) : 10 
+Build Total error(s) : 0  Total warning(s) : 0 
diff --git a/trunk/yav_mcu_bsr.pri b/trunk/yav_mcu_bsr.pri
index 9baf85b..15f69f7 100644
--- a/trunk/yav_mcu_bsr.pri
+++ b/trunk/yav_mcu_bsr.pri
@@ -23,7 +23,7 @@ SubClock=None
 Count=0
 [Main]
 Geometry=65, 39, 1467, 1110
-Window=Max
+Window=Normal
 MDI_MAX=OFF
 Button=ON
 Mode=Auto
@@ -80,8 +80,8 @@ Kanji=SJIS
 [Source]
 Geometry=155, 80, 1012, 920
 Window=Normal
-DispStart=68
-CaretPos=69,0
+DispStart=46
+CaretPos=95,0
 Mode=Normal
 DispFile=
 Address1=
@@ -142,8 +142,8 @@ Accumulative=ON
 [Assemble]
 Geometry=605, 2, 600, 400
 Window=Normal
-DispStart=1262
-CaretPos=1262,27
+DispStart=685
+CaretPos=685,27
 Address1=
 Address2=
 Address3=
@@ -858,43 +858,34 @@ Count=0
 Geometry=1232, 6, 354, 910
 Window=Normal
 Boundary=13762700
-0=.iic_mcu_busy,P,N,A,+,1
-1=.tx_buf,P,N,A,+,1
-2=.new_task,P,N,A,+,1
-3=.if2h,P,S,A,+,1
-4=+pool,P,N,A,-,1
-5=.new_task,P,N,A,+,1
-6=.vreg_ctr,P,N,A,+,1
-7=.cmd_BL,P,N,A,+,1
-8=.P7,B,S,A,+,1
-9=.p5,B,S,A,+,1
-Line=10
+0=.adc_raw_vol,P,N,A,+,1
+1=.vol_old,P,N,A,+,1
+2=.vol,P,N,A,+,1
+3=.direction,P,N,A,+,1
+4=.temp,P,N,A,+,1
+Line=5
 [Quick Watch]
-0=vreg_twl,P,A,1
-1=pm0,P,A,1
-2=data,P,A,1
-3=P5.3,P,A,1
-4=p4.3,P,A,1
-5=pu0,P,A,1
-6=p5,B,A,1
-7=P7,B,A,1
-8=cmd_BL,P,A,1
-9=vreg_ctr,P,A,1
-10=pool,P,A,1
-11=if2,P,A,1
-12=if2h,P,A,1
-13=new_task,P,A,1
-14=tx_buf,P,A,1
-15=iic_mcu_busy,P,A,1
+0=pu0,P,A,1
+1=p5,B,A,1
+2=P7,B,A,1
+3=cmd_BL,P,A,1
+4=vreg_ctr,P,A,1
+5=pool,P,A,1
+6=if2,P,A,1
+7=if2h,P,A,1
+8=new_task,P,A,1
+9=tx_buf,P,A,1
+10=iic_mcu_busy,P,A,1
+11=adc_raw_vol,P,A,1
+12=direction,P,A,1
+13=vol,P,A,1
+14=temp,P,A,1
+15=vol_old,P,A,1
 [Software Break]
 Geometry=1204, 674, 500, 428
 Window=Normal
 Width=150 30 200 100
-Name0=Swb00001
-Address0=vreg_twl.c#_vreg_twl_read+0x6e
-Window0=ASM
-Status0=ON
-Count=1
+Count=0
 [Reset]
 Debugger=ON
 Symbol=OFF
diff --git a/trunk/yav_mcu_bsr.prj b/trunk/yav_mcu_bsr.prj
index 5b22700..407b9d4 100644
--- a/trunk/yav_mcu_bsr.prj
+++ b/trunk/yav_mcu_bsr.prj
@@ -743,11 +743,6 @@ Include27=reboot.h
 Include28=sw.h
 Include29=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
 Include30=batt_params.h
-[ToolSet]
-ToolSetName=(変更)78K0R Software Package V1.10
-Tool1=CC78K0R|W2.10
-Tool2=RA78K0R|W1.31
-Tool3=ID78K0R-QB|V3.60
 [Options.LK78K0R 0]
 Version=100
 O0=bsr_k0r.lmf
@@ -1040,3 +1035,8 @@ DefaultMode2=1
 DefaultMode3=1
 DefaultMode4=1
 DefaultMode5=1
+[ToolSet]
+ToolSetName=(変更)78K0R Software Package V1.10
+Tool1=CC78K0R|W2.10
+Tool2=RA78K0R|W1.31
+Tool3=ID78K0R-QB|V3.60
diff --git a/trunk/yav_mcu_bsr.prk b/trunk/yav_mcu_bsr.prk
index ab22c85..0f23cf5 100644
--- a/trunk/yav_mcu_bsr.prk
+++ b/trunk/yav_mcu_bsr.prk
@@ -1,14 +1,16 @@
 [ProjectManager]
 FrameMax=0
-FrameX=64
-FrameY=122
+FrameX=26
+FrameY=50
 FrameCX=1299
 FrameCY=1044
 OpenFile1=renge\renge.h,0,502,637,1746,1394,29,16,29,0
-OpenFile2=ProjectWindow
+OpenFile2=pm.c,0,154,154,1133,791,0,792,0,0
+OpenFile3=adc.c,0,132,132,1111,769,34,98,34,0
+OpenFile4=ProjectWindow
 PrjPos=0,2,754,3,253
-OpenFile3=config.h,0,22,22,1001,659,21,21,29,0
-OpenFile4=OutputWindow
+OpenFile5=config.h,0,284,54,1263,691,29,9,29,0
+OpenFile6=OutputWindow
 OutputPos=0,421,829,388,1497
 ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
diff --git a/trunk/yav_mcu_bsr.sdb b/trunk/yav_mcu_bsr.sdb
index 3378e94..67f9074 100644
--- a/trunk/yav_mcu_bsr.sdb
+++ b/trunk/yav_mcu_bsr.sdb
@@ -1,7 +1,7 @@
 [SdbInfo]
 Ver=5
 [loader.c]
-T=4b67cfc9
+T=4b68f956
 1=incs_loader.h
 2=fsl.h
 3=fsl_user.h
@@ -11,7 +11,7 @@ T=4b67cfc9
 7=rtc.h
 8=reboot.h
 [pm.c]
-T=4b667a4d
+T=4b6ba554
 1=incs.h
 2=adc.h
 3=led.h
@@ -19,11 +19,11 @@ T=4b667a4d
 5=renge\renge.h
 6=batt_params.h
 [i2c_ctr.c]
-T=4b60e64a
+T=4b690471
 1=incs.h
 2=accero.h
 [main.c]
-T=4b677175
+T=4b68d913
 1=incs_loader.h
 2=WDT.h
 3=rtc.h
@@ -32,7 +32,7 @@ T=4b677175
 6=led.h
 7=adc.h
 [magic.c]
-T=4b67eda0
+T=4b6bde17
 1=config.h
 [WDT.c]
 T=4afd21ca
@@ -42,7 +42,7 @@ T=4b0bae4b
 1=incs.h
 2=i2c_mcu.h
 [i2c_twl.c]
-T=4b60e5e8
+T=4b6a657d
 1=incs.h
 2=i2c_twl_defs.h
 [ini_VECT.c]
@@ -53,10 +53,10 @@ T=4b4438bb
 1=incs.h
 2=led.h
 [rtc.c]
-T=4b4438a1
+T=4b6a6fa4
 1=incs.h
 [vreg_ctr.c]
-T=4b66ac04
+T=4b6b8339
 1=incs.h
 2=vreg_ctr.h
 3=rtc.h
@@ -66,14 +66,14 @@ T=4b66ac04
 7=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
 8=fsl_user.h
 [vreg_twl.c]
-T=4b667aab
+T=4b6907de
 1=incs.h
 2=jhl_defs.h
 3=vreg_twl.h
 4=vreg_ctr.h
 5=renge\renge_task_intval.h
 [adc.c]
-T=4b66954e
+T=4b6bd936
 1=incs.h
 2=adc.h
 3=pm.h
@@ -88,7 +88,7 @@ T=4b5d73b9
 6=user_define.h
 7=bsr_system.h
 [accero.c]
-T=4b66b29e
+T=4b6a666a
 1=incs.h
 2=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
 [self_flash.c]
@@ -110,13 +110,13 @@ T=4b4d6c9b
 6=pm.h
 7=rtc.h
 [task_debug.c]
-T=4b663267
+T=4b6bc508
 1=incs.h
 2=renge\renge.h
 3=pm.h
 4=accero.h
 [task_misc.c]
-T=4b663267
+T=4b6a6fb1
 1=incs.h
 2=renge\renge.h
 3=pm.h
@@ -146,9 +146,9 @@ T=4b25f1a9
 T=4b023fdb
 1=config.h
 [user_define.h]
-T=4b66880a
+T=4b690aa2
 [config.h]
-T=4b67f2af
+T=4b6bde15
 [bsr_system.h]
 T=4b3064de
 [renge\renge.h]
@@ -161,7 +161,7 @@ T=4b32f836
 T=4b42ee65
 1=renge\renge_defs.h
 [vreg_ctr.h]
-T=4b667aa5
+T=4b6bc3cc
 1=config.h
 [loader.h]
 T=4afd21ca
@@ -177,9 +177,9 @@ T=4afd21cb
 [i2c_ctr.h]
 T=4afd21cb
 [pm.h]
-T=4b42e71f
+T=4b68df75
 [rtc.h]
-T=4b161be1
+T=4b6a6fa4
 [adc.h]
 T=4b25ee1e
 1=jhl_defs.h
@@ -197,7 +197,7 @@ T=4b25e780
 8=rtc.h
 9=accero.h
 [vreg_twl.h]
-T=4afd21cb
+T=4b690471
 [accero.h]
 T=4b66ac04
 1=jhl_defs.h