加速度センサが反応しなくなったときに止める

歩数計のヒストリ周り
電源on時、スイッチ押しっぱなしだと電源が切れてしまっていた

git-svn-id: file:///Volumes/Transfer/gigaleak_20231201/2020-05-23%20-%20ctr.7z%20+%20svn_v1.068.zip/ctr/svn/ctr_mcu@53 013db118-44a6-b54f-8bf7-843cb86687b1

trunk/accero.c

@@ -54,6 +54,7 @@ extern u8 pool[];
 u16* hyst_pedometer;
 
 
+
 // ========================================================
 task_interval tsk_soft_int(  );
 static void hosu_increment();
@@ -61,6 +62,7 @@ u16 get_long_hour();
 
 
 
+
 /* ========================================================
 　・割り込みを確認してデータを吸い上げ、レジスタに書き出します
   ・本当であればコールバック関数を登録しておけばいいじゃんとなるのですが、
@@ -73,18 +75,27 @@ task_status_immed tsk_cbk_accero(  )
     if( system_status.pwr_state == ON )
     {
         // 加速度センサデータレジスタへの反映
-        iic_mcu_read( IIC_SLA_ACCEL, ( ACC_REG_X | 0x80 ), 6, &vreg_ctr[VREG_C_ACC_XL] );
+        if( iic_mcu_read( IIC_SLA_ACCEL, ( ACC_REG_X | 0x80 ), 6, &vreg_ctr[VREG_C_ACC_XL] )
-
+            == ERR_SUCCESS )
-        if( ( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_ACQ  ) != 0 )
         {
-            set_irq( VREG_C_IRQ1, REG_BIT_ACC_DAT_RDY );
+            if( ( vreg_ctr[VREG_C_ACC_CONFIG] & VREG_BITMASK_ACC_CONF_ACQ  ) != 0 )
+            {
+                set_irq( VREG_C_IRQ1, REG_BIT_ACC_DAT_RDY );
+            }
+
+            // ゴミデータのカラ読み
+            if( ACC_VALID == 1 )
+            {
+                u8 temp[6];
+                iic_mcu_read( IIC_SLA_ACCEL, ( ACC_REG_X | 0x80 ), 6, temp );
+            }
         }
-
+        else
-        // ゴミデータのカラ読み
-        if( ACC_VALID == 1 )
         {
-            u8 temp[6];
+            // 加速度センサが異常になったので止める
-            iic_mcu_read( IIC_SLA_ACCEL, ( ACC_REG_X | 0x80 ), 6, temp );
+            vreg_ctr[VREG_C_ACC_CONFIG] &= ~( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ );
+            acc_hosu_set();
+            return ( ERR_SUCCESS ); // タスクの削除は必要
         }
     }
 
@@ -105,7 +116,7 @@ task_status_immed tsk_cbk_accero(  )
 
         acc_norm[2] = acc_norm[1];
         acc_norm[1] = acc_norm[0];
-            // そのうちローコストな方法を考える、かも
+        // そのうちローコストな方法を考える、かも
         acc_norm[0] = sqrt( (long)sx16 * ( sx16 / 2 ) +
                             (long)sy16 * ( sy16 / 2 ) +
                             (long)sz16 * ( sz16 / 2 ) );
@@ -164,6 +175,7 @@ u8 p_record;
 static void hosu_increment()
 {
     static u16 last_hour;        // 履歴の最新は何時？
+    static u8  last_year;
 
     // 累積の更新 //
     // いろいろ失敗した...
@@ -181,26 +193,80 @@ static void hosu_increment()
 
     // 毎時履歴の更新
     {
-        u16 temp_hour = get_long_hour();
+        u16 now_hour;
-        if( temp_hour > last_hour )
+        u8 now_year;
+
+        // 時計を止める必要が有るので↓は一気に行って下さい
+        DI();
+        RWAIT = 1;
+        while( !RWST ){;}
+        now_year = bcdtob( YEAR );
+        now_hour = get_long_hour();
+        // RWAIT = 0;  ↑で行っています
+        // EI();             〃
+
+        // 歩数計が止まったいた時間を考慮して必要なら進める //
+        if( last_year == now_year )
         {
-            for( ; last_hour != temp_hour; last_hour += 1 )
+            if( now_hour > last_hour )
             {
-                p_record += 1;
+                fill_hosu_hist_hours( now_hour - last_hour );
-                *(hyst_pedometer + p_record) = MAGIC_PEDO_NODATA;
             }
-            *(hyst_pedometer + p_record) = 0;
+        }
+        else if( last_year == ( now_year -1 ) )
+        {
+            // 年をまたいでいるとき
+            u16 temp_hours = last_hour + now_hour - ( ( 365 + (( now_year & 0x03 ) == 1 )? 1: 0 ) * 24 );
+            fill_hosu_hist_hours( temp_hours );
+        }
+        else if( last_year < now_year )
+        {
+            // 数年放置
+            fill_hosu_hist_hours( 255 );
+        }
+        else
+        {
+            // 巻き戻るなど
+            // 知らない…
         }
 
-        *(hyst_pedometer + p_record) += 1;
+        // 実際にインクリメント
-        if( *( hyst_pedometer + p_record ) == MAGIC_PEDO_MAX )
+        *( hyst_pedometer + p_record ) += 1;
+        if( *( hyst_pedometer + p_record ) < MAGIC_PEDO_MAX )
         {
-            *hyst_pedometer = 65534;
+            *( hyst_pedometer + p_record ) = MAGIC_PEDO_MAX;
         }
+    
     }
 }
 
 
+
+void fill_hosu_hist_hours( u16 hours )
+{
+    if( hours > 255 )
+    {
+      hours = 255;
+    }
+
+    hours -= 1;
+
+    // 空白の数時間の設定
+    while( hours != 0 )
+    {
+        p_record += 1;
+        *( hyst_pedometer + p_record ) = MAGIC_PEDO_NODATA;
+        hours -= 1;
+    }
+    p_record += 1;
+    *( hyst_pedometer + p_record ) = 0;
+}
+
+
+
+
+
+
 bit hosu_read_inited;
 bit record_read_msb_lsb;
 
@@ -239,7 +305,7 @@ u8 hosu_read(  )
     else
     {
         rv = (u8)( temp & 0x00FF );
-        p_record_buffer += 1;
+        p_record_buffer -= 1;
     }
     record_read_msb_lsb += 1;
 
@@ -249,7 +315,7 @@ u8 hosu_read(  )
 
 void hosu_init()
 {
-    u8 i;
+    u8 i = 0;
 
     hyst_pedometer = (u16*)pool;
     do
@@ -390,8 +456,7 @@ __interrupt void intp23_ACC_ready(  )
 
 
 /* ========================================================
-  2000年１月１日０時からの現在時刻を返す
+  今年の元旦からの経過時間(hour)を返す。
-
   引数  無し
   返値  u16 long_hour
 ======================================================== */
@@ -401,38 +466,35 @@ static const u16 DAYS_FROM_HNY[] = {
     120+31, 151+30, 181+31, 212+31, 243+30,
     273+31, 304+30 };
 
-
 u16 get_long_hour()
 {
     u16 long_hour;
-    u8  year_hex  = bcdtob( YEAR );
+    u8  year_hex;
-    u8  month_hex = bcdtob( MONTH );
+    u8  month_hex;
-    u8  day_hex   = bcdtob( DAY );
+    u8  day_hex;
-    u8  hour_hex  = bcdtob( HOUR );
+    u8  hour_hex;
 
-    DI();
+    year_hex  = bcdtob( YEAR );
-
+    month_hex = bcdtob( MONTH );
-    RWAIT = 1;
+    day_hex   = bcdtob( DAY );
-    while( !RWST ){;}
+    hour_hex  = bcdtob( HOUR );
-
-    // まず日数の部分
-    long_hour = year_hex * 365;
-    long_hour += ( year_hex / 4 ) +1;      // 閏日の分。修正ユリウスでは2000年も閏年
-    long_hour += DAYS_FROM_HNY[ month_hex ];
-    if(( 2 <= month_hex ) && ( day_hex < 29 ))
-    {
-        // 2/29より前
-        long_hour -= 1;
-    }
-    long_hour += day_hex;
-
-    long_hour *= 24;
-    long_hour += hour_hex;
 
     RWAIT = 0;
-
     EI();
 
+    // まず日数の部分
+    long_hour = DAYS_FROM_HNY[ month_hex ];
+    if(( ( year_hex & 0x03 ) == 0 ) && ( ( 3 <= month_hex )
+                                         || (( 2 == month_hex ) && ( day_hex == 29 )) ))
+    {
+        // 閏年で、閏日より後
+        long_hour += 1;
+    }
+    long_hour += day_hex;
+    long_hour *= 24; // 日数→時間
+
+    long_hour += hour_hex;
+
     return( long_hour );
 }
 

trunk/accero.h

@@ -13,6 +13,7 @@ task_status_immed acc_hosu_set(  );
 void hosu_init();
 void hosu_read_end(  );
 u8 hosu_read(  );
+void fill_hosu_hist_hours( u16 );
 
 
 #endif

trunk/config.h

@@ -6,7 +6,7 @@
 
 
 #define MCU_VER_MAJOR    0x00;
-#define MCU_VER_MINOR    0x0C;
+#define MCU_VER_MINOR    0x0B;
 
 #define _OVERCLOCK_
 

trunk/incs.h

@@ -25,6 +25,8 @@
 
 #include "rtc.h"
 
+#include "accero.h"
+
 
 //=========================================================
 err firm_update(  );

trunk/pm.c

@@ -827,7 +827,7 @@ task_status_immed ntr_pmic_comm(  )
     {
         // CODECバグ回避
         // リセット単品でなかったら無視
-//        if( ( reg1_old ^ reg_shadow ) == REG_BIT_TWL_REQ_RST_REQ )
+        if( ( reg1_old ^ reg_shadow ) == REG_BIT_TWL_REQ_RST_REQ )
         {
             set_irq( VREG_C_IRQ2, REG_BIT_TWL_RESET_REQ );
         }

trunk/pm.h

@@ -68,6 +68,11 @@ enum BT_GAUGE_REG_ADRS
 #define PM_REG_BIT_BL_L         0x02
 
 
+// 0x05 pow save
+#define PM_REG_BIT_VDD1P_1R05   0b00001000
+#define PM_REG_BIT_VDD1P_0R90   0b00100000
+#define PM_REG_BIT_VDD_AUTO     0b00000111
+#define PM_REG_BIT_VDD_PWM      0b00000000
 
 
 #define DELAY_PM_TW_PWUP               16
@@ -126,19 +131,20 @@ task_status_immed tski_vcom_set(  );
 #else
 // 本番チップ待ち
 #ifdef _PM_BUG_
-#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, 0x00 | 0x04 ))
+#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, PM_REG_BIT_VDD1P_0R90 | PM_REG_BIT_VDD_AUTO ))
-#define PM_VDD_normMode()   ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, 0x00 | 0x03 ))
+#define PM_VDD_normMode()   ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, PM_REG_BIT_VDD1P_1R10 | PM_REG_BIT_VDD_PWM ))
 
 #else
 
 #ifdef _SAITO_
-#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, 0x00 | 0x04 ))
+// ƒXƒŠ<C692>[ƒvŽž<C5BD>A3.3‚Ì‚ÝAUTO/PFM
+#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, PM_REG_BIT_VDD1P_1R05 | 0x04 ))
 #else
 
-#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, 0x00 | 0x07 ))
+#define PM_VDD_ecoMode()    ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, PM_REG_BIT_VDD1P_1R05 | PM_REG_BIT_VDD_AUTO ))
 #endif
 
-#define PM_VDD_normMode()   ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, 0x00 | 0x00 ))
+#define PM_VDD_normMode()   ( iic_mcu_write_a_byte( IIC_SLA_PMIC, PM_REG_ADRS_POW_SAVE, PM_REG_BIT_VDD1P_1R05 | PM_REG_BIT_VDD_PWM ))
 
 #endif
 #endif

trunk/sw.c

@@ -56,16 +56,6 @@ void tsk_sw(  )
     static u8 cnt_force_off = 0;
     static u8 task_interval = 0;
 
-    if( task_interval-- != 0 )
-    {
-        return;
-    }
-    else
-    {
-        task_interval = (u8)( INTERVAL_TSK_SW / SYS_INTERVAL_TICK );
-    }
-
-
     switch ( system_status.pwr_state )
     {
     case ( OFF_TRIG ):
@@ -80,11 +70,21 @@ void tsk_sw(  )
         SW_pow_mask = 1;
         SW_home_mask = 1;
         SW_wifi_mask = 1;
-        SW_pow_count = 0;
-        SW_wifi_count = 0;
-        SW_home_count = 0;
         break;
+    }
 
+    if( task_interval-- != 0 )
+    {
+        return;
+    }
+    else
+    {
+        task_interval = (u8)( INTERVAL_TSK_SW / SYS_INTERVAL_TICK );
+    }
+
+
+    switch ( system_status.pwr_state )
+    {
     case ( ON ):
     case ( SLEEP ):
     case ( BT_CHARGE ):
@@ -150,9 +150,12 @@ void tsk_sw(  )
     }
 
     // ボタン押し時間のカウント
-    if( ( system_status.pwr_state == ON )
+/*
+if( ( system_status.pwr_state == ON )
     || ( system_status.pwr_state == OFF )
     || ( system_status.pwr_state == BT_CHARGE ) )
+    */
+
     {
         count_sw_n( SW_POW_n, SW_pow_count, SW_pow_mask );
 #ifdef _SW_HOME_ENABLE_

trunk/task_sys.c

@@ -109,8 +109,7 @@ void tsk_sys(  )
         }
         system_status.pwr_state = ON_TRIG;
         // ここまで来ると、電源投入確定
-
+        break;
-        // no break //
 
     case ON_TRIG:              //-------------------------------------------------------
 
@@ -348,4 +347,5 @@ __interrupt void intp0_slp(  )
  **********************************************************/
 task_status_immed tski_firm_update(){
     firm_update();
+    return( ERR_SUCCESS );
 }

trunk/yav_mcu_bsr.plg

@@ -1,19 +1,57 @@
 C:\WINDOWS\system32\cmd.exe /c touch magic.c
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl2wt -sainter_asm -zp -no magic.c
+"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl2wt -sainter_asm -zp -no accero.c
-accero.c(102) : CC78K0R warning W0745: Expected function prototype
-accero.c(111) : CC78K0R warning W0401: Conversion may lose significant digits
-Compilation complete,    0 error(s) and    2 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\accero.asm
-Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb6EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel reboot.rel sw.rel task_debug.rel task_misc.rel task_sys.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex -nu -ki  bsr.lmf
 Object Conversion Complete,      0 error(s) and     0 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rloader.rel -lbsr.lmf -ointer_asm  loader.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rpm.rel -lbsr.lmf -ointer_asm  pm.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -ri2c_ctr.rel -lbsr.lmf -ointer_asm  i2c_ctr.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rmain.rel -lbsr.lmf -ointer_asm  main.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rmagic.rel -lbsr.lmf -ointer_asm  magic.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rWDT.rel -lbsr.lmf -ointer_asm  WDT.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -ri2c_mcu.rel -lbsr.lmf -ointer_asm  i2c_mcu.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -ri2c_twl.rel -lbsr.lmf -ointer_asm  i2c_twl.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rini_VECT.rel -lbsr.lmf -ointer_asm  ini_VECT.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rled.rel -lbsr.lmf -ointer_asm  led.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rrtc.rel -lbsr.lmf -ointer_asm  rtc.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rvreg_ctr.rel -lbsr.lmf -ointer_asm  vreg_ctr.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rvreg_twl.rel -lbsr.lmf -ointer_asm  vreg_twl.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -radc.rel -lbsr.lmf -ointer_asm  adc.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rrenge.rel -lbsr.lmf -ointer_asm  renge.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -raccero.rel -lbsr.lmf -ointer_asm  accero.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rself_flash.rel -lbsr.lmf -ointer_asm  self_flash.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rreboot.rel -lbsr.lmf -ointer_asm  reboot.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rsw.rel -lbsr.lmf -ointer_asm  sw.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rtask_debug.rel -lbsr.lmf -ointer_asm  task_debug.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rtask_misc.rel -lbsr.lmf -ointer_asm  task_misc.prn
+Conversion complete.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lc78k0r.exe" -_msgoff -rtask_sys.rel -lbsr.lmf -ointer_asm  task_sys.prn
+Conversion complete.
 C:\WINDOWS\system32\cmd.exe /c ruby C:\Cygwin\home\fujita_ryohei\ctr\nec_s_2_bsrbin.rb bsr.hex
 C:/Cygwin/home/fujita_ryohei/ctr/nec_s_2_bsrbin.rb:2: warning: variable $KCODE is no longer effective; ignored
 
-Build Total error(s) : 0  Total warning(s) : 2 
+Build Total error(s) : 0  Total warning(s) : 0 

trunk/yav_mcu_bsr.pri

@@ -23,7 +23,7 @@ SubClock=None
 Count=0
 [Main]
 Geometry=66, 66, 1467, 1110
-Window=Max
+Window=Icon
 MDI_MAX=OFF
 Button=ON
 Mode=Auto
@@ -78,10 +78,10 @@ Symbol Type=OFF
 Language=C
 Kanji=SJIS
 [Source]
-Geometry=294, 80, 600, 1014
+Geometry=135, 77, 764, 1014
 Window=Normal
-DispStart=263
+DispStart=31
-CaretPos=264,0
+CaretPos=87,0
 Mode=Normal
 DispFile=
 Address1=
@@ -139,19 +139,11 @@ SaveRange=Screen
 SaveStart=
 SaveEnd=
 Accumulative=ON
-[Source1]
-Geometry=25, 25, 600, 1014
-Window=Normal
-DispStart=777
-CaretPos=778,0
-Mode=Normal
-DispFile=pm.c
-Accumulative=ON
 [Assemble]
 Geometry=605, 2, 600, 400
 Window=Normal
-DispStart=16108
+DispStart=10256
-CaretPos=16108,27
+CaretPos=10256,27
 Address1=
 Address2=
 Address3=
@@ -193,7 +185,7 @@ SaveRange=Screen
 SaveStart=
 SaveEnd=
 [Memory]
-Geometry=442, 97, 550, 1012
+Geometry=592, 111, 550, 1012
 Window=Normal
 Boundary=163
 Format=Hex
@@ -202,9 +194,9 @@ Endian=Little
 Ascii=OFF
 Idtag=OFF
 Address=
-DispStart=00000000
+DispStart=000FF8F0
-CaretPosData=0, 246
+CaretPosData=0, 65423
-CaretPosAscii=0, 246
+CaretPosAscii=0, 65423
 Address1=
 Address2=
 Address3=
@@ -259,7 +251,7 @@ Destination=0
 [I/O Port]
 Line=0
 [Stack]
-Geometry=780, 470, 400, 300
+Geometry=777, 465, 400, 300
 Window=Normal
 Boundary=13762687
 Mode=Proper
@@ -866,72 +858,68 @@ Count=0
 Geometry=1145, 8, 440, 1086
 Window=Normal
 Boundary=13762700
-0=.RTCEN,P,S,A,+,1
+0=.pool,P,N,A,+,1
-1=.tasks_immed,P,N,A,+,1
+1=.hyst_pedometer,.,N,A,+,1
-2=.system_status,.,N,A,+,1
+2=.P5.3,P,S,A,+,1
-3=.hyst_pedometer,.,N,A,+,1
+3=.PM5.3,P,S,A,+,1
-4=.pool,P,N,A,+,1
+4=.RTCEN,P,S,A,+,1
-5=.last_year,P,N,A,+,1
+5=.tasks_immed,P,N,A,+,1
-6=.last_month,P,N,A,+,1
+6=.system_status,.,N,A,+,1
-7=.last_day,P,N,A,+,1
+7=.hyst_pedometer,.,N,A,+,1
-8=.last_hour,P,N,A,+,1
+8=.pool,P,N,A,+,1
-9=.p_record,P,N,A,+,1
+9=.last_year,P,N,A,+,1
-10=.vreg_ctr[0x60],P,N,A,+,1
+10=.last_month,P,N,A,+,1
-Line=11
+11=.last_day,P,N,A,+,1
+12=.last_hour,P,N,A,+,1
+13=.p_record,P,N,A,+,1
+14=.vreg_ctr[0x60],P,N,A,+,1
+Line=15
 [Quick Watch]
 0=last_hour,P,A,1
 1=last_day,P,A,1
 2=last_month,P,A,1
 3=last_year,P,A,1
-4=pool,P,A,1
+4=p_record,P,A,1
-5=p_record,P,A,1
+5=vreg_ctr,P,A,1
-6=hyst_pedometer,P,A,1
+6=vreg_ctr[0x60],P,A,1
-7=vreg_ctr,P,A,1
+7=RTCEN,P,A,1
-8=vreg_ctr[0x60],P,A,1
+8=system_status,P,A,1
-9=RTCEN,P,A,1
+9=tasks_immed,P,A,1
-10=system_status,P,A,1
+10=PM5.3,P,A,1
-11=tasks_immed,P,A,1
+11=P5.3,P,A,1
-12=
+12=hyst_pedometer,P,A,1
-13=
+13=pool,P,A,1
 14=
 15=
 [Software Break]
-Geometry=0, 0, 0, 0
+Geometry=25, 25, 500, 428
-Window=Hide
+Window=Normal
 Width=150 30 200 100
 Name0=Swb00001
-Address0=accero.c#_pedo_increment+0x78
+Address0=accero.c#_hosu_increment+0x36
 Window0=ASM
 Status0=ON
-Name1=Swb00003
+Name1=Swb00002
-Address1=self_flash.c#_firm_update+0x0
+Address1=accero.c#_hosu_increment+0x55
 Window1=ASM
 Status1=ON
 Name2=Swb00005
-Address2=self_flash.c#_firm_update+0xfe
+Address2=accero.c#_hosu_read+0xa
 Window2=ASM
 Status2=ON
-Name3=Swb00004
+Name3=Swb00006
-Address3=self_flash.c#_firm_update+0x101
+Address3=pm.c#_PM_init+0x39
 Window3=ASM
-Status3=ON
+Status3=OFF
-Name4=Swb00006
+Name4=Swb00004
-Address4=task_misc.c#_do_command+0x15
+Address4=sw.c#_tsk_sw+0x37
 Window4=ASM
 Status4=ON
-Name5=Swb00008
+Name5=Swb00003
-Address5=task_misc.c#_do_command+0x37
+Address5=task_sys.c#_tsk_sys+0x9c
 Window5=ASM
 Status5=ON
-Name6=Swb00009
+Count=6
-Address6=task_misc.c#_do_command+0x4a
-Window6=ASM
-Status6=ON
-Name7=Swb00002
-Address7=pm.c#_ntr_pmic_comm+0x5
-Window7=ASM
-Status7=ON
-Count=8
 [Reset]
 Debugger=ON
 Symbol=OFF

trunk/yav_mcu_bsr.prj

@@ -246,6 +246,333 @@ Source19=sw.c
 Source20=task_debug.c
 Source21=task_misc.c
 Source22=task_sys.c
+[IncFile]
+Include1=incs_loader.h
+Include2=jhl_defs.h
+Include3=user_define.h
+Include4=config.h
+Include5=bsr_system.h
+Include6=renge\renge.h
+Include7=renge\renge_defs.h
+Include8=renge\renge_task_immediate.h
+Include9=vreg_ctr.h
+Include10=loader.h
+Include11=i2c_mcu.h
+Include12=WDT.h
+Include13=fsl.h
+Include14=fsl_user.h
+Include15=i2c_ctr.h
+Include16=pm.h
+Include17=rtc.h
+Include18=adc.h
+Include19=led.h
+Include20=incs.h
+Include21=vreg_twl.h
+Include22=accero.h
+Include23=i2c_twl_defs.h
+Include24=renge\renge_task_intval.h
+Include25=i2c_twl.h
+Include26=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
+Include27=reboot.h
+Include28=sw.h
+Include29=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
+[Options.LK78K0R 0]
+Version=100
+O0=bsr_k0r.lmf
+O1=bsr.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=1
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 1]
+Version=100
+O0=a.lmf
+G=0
+E=0
+E0=a.elk
+GO=0
+GOValue=
+GOStart=FC00
+GOSizeValue=1024
+GI=0
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=1
+MemInfoCheck=0
+P=1
+P0=a.map
+MI=0
+GB=0
+GBValue=
+KM=1
+KD=1
+KP=0
+KL=0
+LF=0
+LL=0
+S=0
+W=1
+SELFCheck=0
+SELF=0
+ZB=
+CommandFile=0
+[Options.LK78K0R 2]
+Version=100
+O0=bsr.lmf
+O1=bsr_k0r.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+OFILE=C:\78k_data\yav-mcu-basara\bsr.lmf
+[Options.LK78K0R 3]
+Version=100
+O0=bsr_bsr.lmf
+O1=bsr_k0r.lmf
+O2=bsr.lmf
+O3=flash.lmf
+O4=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_bsr.map
+P1=bsr_k0r.map
+P2=bsr.map
+P3=flash.map
+P4=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=2
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 4]
+Version=100
+O0=bsr_k0r.lmf
+O1=bsr.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=1
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 5]
+Version=100
+O0=bsr_bsr.lmf
+O1=bsr_k0r.lmf
+O2=bsr.lmf
+O3=flash.lmf
+O4=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_bsr.map
+P1=bsr_k0r.map
+P2=bsr.map
+P3=flash.map
+P4=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=2
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[ToolSet]
+ToolSetName=(•Ï<E280A2>X)78K0R Software Package V1.10
+Tool1=CC78K0R|W2.10
+Tool2=RA78K0R|W1.31
+Tool3=ID78K0R-QB|V3.60
+[Options.LCNV78K0R 0]
+Version=100
+LCNV_GO=0
+E=0
+CommandFile=0
+[Options.LCNV78K0R 1]
+Version=100
+LCNV_GO=0
+E=0
+CommandFile=0
+[Options.LCNV78K0R 2]
+Version=100
+LCNV_GO=1
+O0=inter_asm
+E=0
+CommandFile=0
+[Options.LCNV78K0R 3]
+Version=100
+LCNV_GO=0
+E=0
+CommandFile=0
+[Options.LCNV78K0R 4]
+Version=100
+LCNV_GO=0
+E=0
+CommandFile=0
+[Options.LCNV78K0R 5]
+Version=100
+LCNV_GO=0
+E=0
+CommandFile=0
+[Options.78K0R]
+BuildMode=2
+BuildMode2=K0R_dbg
+BuildMode3=BSR_dbg
+BuildMode4=BSR_rel
+BuildMode5=BSR_WM0
+DefaultMode2=1
+DefaultMode3=1
+DefaultMode4=1
+DefaultMode5=1
 [Options.CC78K0R 0]
 Version=210
 Include0=renge,C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
@@ -423,7 +750,7 @@ Usesaddrchk=0
 Autoallocationchk=1
 Jumpoptimize=1
 Librarycallchk=1
-Librarycall=1129
+Librarycall=1132
 Aggressivechk=1
 Relativebranchchk=1
 Debugoptchk=0
@@ -482,7 +809,8 @@ Undefine0=
 Include0=renge,C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
 Include1=renge,C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
 Include2=renge,C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
-Include3=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
+Include3=renge,C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
+Include4=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r
 Memorymodel=1
 Flashobj=0
 FlashStartadr=
@@ -505,7 +833,7 @@ Usesaddrchk=0
 Autoallocationchk=1
 Jumpoptimize=1
 Librarycallchk=0
-Librarycall=1128
+Librarycall=1132
 Aggressivechk=1
 Relativebranchchk=0
 Debugoptchk=0
@@ -794,329 +1122,3 @@ VfiFileBoot0=
 VfiFileBoot1=boot.vfi
 VF78K0Rchk=0
 VF78K0Rvs=
-[IncFile]
-Include1=incs_loader.h
-Include2=jhl_defs.h
-Include3=user_define.h
-Include4=config.h
-Include5=bsr_system.h
-Include6=renge\renge.h
-Include7=renge\renge_defs.h
-Include8=renge\renge_task_immediate.h
-Include9=vreg_ctr.h
-Include10=loader.h
-Include11=i2c_mcu.h
-Include12=WDT.h
-Include13=fsl.h
-Include14=fsl_user.h
-Include15=i2c_ctr.h
-Include16=pm.h
-Include17=rtc.h
-Include18=adc.h
-Include19=led.h
-Include20=incs.h
-Include21=vreg_twl.h
-Include22=accero.h
-Include23=i2c_twl_defs.h
-Include24=renge\renge_task_intval.h
-Include25=i2c_twl.h
-Include26=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
-Include27=reboot.h
-Include28=sw.h
-Include29=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
-[Options.LK78K0R 0]
-Version=100
-O0=bsr_k0r.lmf
-O1=bsr.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=1
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 1]
-Version=100
-O0=a.lmf
-G=0
-E=0
-E0=a.elk
-GO=0
-GOValue=
-GOStart=FC00
-GOSizeValue=1024
-GI=0
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=1
-MemInfoCheck=0
-P=1
-P0=a.map
-MI=0
-GB=0
-GBValue=
-KM=1
-KD=1
-KP=0
-KL=0
-LF=0
-LL=0
-S=0
-W=1
-SELFCheck=0
-SELF=0
-ZB=
-CommandFile=0
-[Options.LK78K0R 2]
-Version=100
-O0=bsr.lmf
-O1=bsr_k0r.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-OFILE=C:\78k_data\yav-mcu-basara\bsr.lmf
-[Options.LK78K0R 3]
-Version=100
-O0=bsr_bsr.lmf
-O1=bsr_k0r.lmf
-O2=bsr.lmf
-O3=flash.lmf
-O4=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_bsr.map
-P1=bsr_k0r.map
-P2=bsr.map
-P3=flash.map
-P4=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=2
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 4]
-Version=100
-O0=bsr_k0r.lmf
-O1=bsr.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=1
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 5]
-Version=100
-O0=bsr_bsr.lmf
-O1=bsr_k0r.lmf
-O2=bsr.lmf
-O3=flash.lmf
-O4=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_bsr.map
-P1=bsr_k0r.map
-P2=bsr.map
-P3=flash.map
-P4=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=2
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LCNV78K0R 0]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.LCNV78K0R 1]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.LCNV78K0R 2]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.LCNV78K0R 3]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.LCNV78K0R 4]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.LCNV78K0R 5]
-Version=100
-LCNV_GO=0
-E=0
-CommandFile=0
-[Options.78K0R]
-BuildMode=2
-BuildMode2=K0R_dbg
-BuildMode3=BSR_dbg
-BuildMode4=BSR_rel
-BuildMode5=BSR_WM0
-DefaultMode2=1
-DefaultMode3=1
-DefaultMode4=1
-DefaultMode5=1
-[ToolSet]
-ToolSetName=(•Ï<E280A2>X)78K0R Software Package V1.10
-Tool1=CC78K0R|W2.10
-Tool2=RA78K0R|W1.31
-Tool3=ID78K0R-QB|V3.60

trunk/yav_mcu_bsr.prk

@@ -9,12 +9,12 @@ OpenFile2=task_sys.c,0,521,328,1765,1085,25,250,25,0
 OpenFile3=bsr_mcu.dr,0,198,198,1177,834,0,54,0,0
 OpenFile4=adc.c,0,220,220,1199,856,0,112,0,0
 OpenFile5=loader.c,0,266,31,1510,788,23,43,23,0
-OpenFile6=ProjectWindow
+OpenFile6=config.h,0,286,286,1530,1043,0,19,21,0
-PrjPos=0,2,754,3,253
+OpenFile7=sw.c,0,132,132,1376,889,0,166,17,0
-OpenFile7=config.h,0,286,286,1530,1043,0,19,21,0
+OpenFile8=OutputWindow
-OpenFile8=sw.c,0,132,132,1376,889,0,166,17,0
-OpenFile9=OutputWindow
 OutputPos=0,711,1482,484,1586
+OpenFile9=ProjectWindow
+PrjPos=0,2,754,3,253
 ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
 ProjectWindowDispType=0