rvtr/ctr_mcu
1
Fork 0
mirror of https://github.com/rvtr/ctr_mcu.git synced 2025-10-31 13:51:10 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity

CODEC不具合対策I2Cライト関数追加

Browse Source 
スリープ時のLEDパターン、仕様決定
デバッグタスク削除
#ifdefのいらない分岐、ついでがあれば削除
I2C_CTR側　VOL option (0x26)　の機能追加

git-svn-id: file:///Volumes/Transfer/gigaleak_20231201/2020-05-23%20-%20ctr.7z%20+%20svn_v1.068.zip/ctr/svn/ctr_mcu@203 013db118-44a6-b54f-8bf7-843cb86687b1
This commit is contained in:
N2232 2010-07-14 08:41:03 +00:00
parent 4efe357491
commit 5df850ac96
26 changed files with 1717 additions and 1633 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
trunk/accero.c
View File

@ -172,28 +172,12 @@ task_status_immed acc_hosu_set( )
if( iic_mcu_result == ERR_NOSLAVE )
{
vreg_ctr[ VREG_C_STATUS_1 ] |= REG_BIT_ACCERO_ERR;
#ifdef _MCU_BSR_
// PMK23 = 1;
#endif
return ( ERR_FINISED ); // とりあえず、タスクは削除しなくてはならない
}else{
vreg_ctr[ VREG_C_STATUS_1 ] &= ~REG_BIT_ACCERO_ERR;
}
str_send_buf[1] = 0x00; // ctrl2 HPF:normal, filterd, HPF for IRQ : dis/dis, HPF coeff:norm
#ifdef _MODEL_WM0_
# ifdef _MODEL_WM0_TEG2_CTRC_
str_send_buf[2] = 0x02; // 回路が一部違う
# else
str_send_buf[2] = 0x10; // 3 IRQ pol :Active HI, Drive:Pushpull,
/// IRQ2flg latch: auto clear after read, IRQ2 conf: IRQ( fall,shock,...)
/// 1 : auto clear after read, conf: data ready
# endif
#else
# ifdef _MODEL_CTR_
/*
if( system_status.model == MODEL_TS_BOARD )
{
@ -206,32 +190,20 @@ if( system_status.model == MODEL_TS_BOARD )
str_send_buf[2] = 0x10; // 3 IRQ pol :Active HI, Drive:Pushpull,
}
*/
str_send_buf[2] = 0x12; // 面倒なので両方...。
# else
// TS( type T )
str_send_buf[2] = 0x02; // 3 IRQ pol :Active HI, Drive:Pushpull,
/// IRQ2flg latch: auto clear after read, IRQ2 conf: IRQ( fall,shock,...)
/// 1 : auto clear after read, conf: data ready
# endif
#endif
str_send_buf[3] = 0x80; // ctrl3 block update:enable, MSB first, scale: +-2G(default), selftest: dis
str_send_buf[2] = 0b00010010; // 面倒なので両方...。
str_send_buf[3] = 0x80; // ctrl3 block update:enable, MSB first, scale: +-2G(default), selftest: dis
if( ( vreg_ctr[VREG_C_ACC_CONFIG] &
( VREG_BITMASK_ACC_CONF_HOSU | VREG_BITMASK_ACC_CONF_ACQ ) ) == 0 )
{
#ifdef _MCU_BSR_
PMK23 = 1;
#endif
PMK23 = 1;
// 完全停止
str_send_buf[0] =
( ACC_BITS_PM_PDN << ACC_bP_PM0 | 0 << ACC_bP_DR0 | ACC_BITS_ALL_AXIS_ON );
}
else
{
#ifdef _MCU_BSR_
PMK23 = 0;
#endif
// 100Hz 自動取り込み
str_send_buf[0] =
( ACC_BITS_PM_NORM << ACC_bP_PM0

43
trunk/adc.c
View File

@ -83,7 +83,7 @@ void tsk_adc( )
static u8 sndvol_codec;
static u8 bt_temp_old;
#if 0
#ifdef _DEBUG_CODEC_POLLING_
// debug
{
static bit interval;
@ -95,31 +95,9 @@ void tsk_adc( )
return;
}
}
#endif
#if 0
{
static u16 loop;
if( system_status.pwr_state == ON )
{
loop++;
if( loop == 499 ){
}
else if( loop == 500 ){
loop = 0;
}
else
{
vol_written_ctr = slider_to_codec[ vol_data_ctr ];
}
}
renge_task_immed_add( tski_vol_update );
}
//*/
#endif
renge_task_immed_add( tski_vol_update ); // T = 2ms polling
#endif
if( task_interval-- != 0 )
{
@ -149,7 +127,7 @@ void tsk_adc( )
{
vol_changed_by_ctr = 1;
vol_old = vol_data_ctr;
// renge_task_immed_add( tski_vol_update ); 2ms後でいいでしょう...
renge_task_immed_add( tski_vol_update ); // 2ms後でいいでしょう...
}
}
@ -197,7 +175,7 @@ task_status_immed tski_vol_update()
}
// どの音量にするの？ //
if( vreg_ctr[ VREG_C_VOL_OPTION ] & REG_BIT_VOL_FORCE_SLIDER )
if( vreg_ctr[ VREG_C_VOL_OPTION ] & ( REG_BIT_VOL_FORCE_SLIDER | REG_BIT_VOL_UPDATE_TO_SLIDER ) )
{
// 最優先 スライダに上書き
sent_index = vol_data_ctr;
@ -263,17 +241,12 @@ task_status_immed tski_vol_update()
if( vreg_ctr[ VREG_C_VOL_OPTION ] & REG_BIT_VOL_BY_SPI )
{
return( ERR_FINISED );
// by SPI ならここまででおしまい //
}
// by SPI ならここまででおしまい //
// debug todo
iic_mcu_read_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL );
// codecに伝える
iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL, slider_to_codec[ sent_index ] );
// debug todo
iic_mcu_read_a_byte( IIC_SLA_CODEC, CODEC_REG_VOL );
/// 同値でも書く
iic_mcu_write_a_byte_codec( CODEC_REG_VOL, slider_to_codec[ sent_index ] );
// set_irq( VREG_C_IRQ0, REG_BIT_VR_SNDVOL_CHANGE ); // 割り込み廃止
return( ERR_FINISED );
@ -391,7 +364,6 @@ case ( ADC_SEL_AMB_BRIT ): //
if( ADS < ADC_SEL_BATT_DET )
{
ADS += 1; // 次のチャンネル
ADIF = 0; // ←これをしないと、いっこ前のチャンネルのデータの完了で直後に割り込む可能性がある
}
else
{
@ -399,6 +371,7 @@ case ( ADC_SEL_AMB_BRIT ): //
adc_updated = 1;
index = ( index == 2 ) ? 0 : ( index + 1 ); // ノイズ取りの配列インデックス
}
ADIF = 0; // ←これをしないと、いっこ前のチャンネルのデータの完了で直後に割り込む可能性がある
}

1764
trunk/bsr.hex
View File

File diff suppressed because it is too large Load Diff

BIN
trunk/bsr.lmf
View File

Binary file not shown.

684
trunk/bsr_k0r.map
View File

@ -1,7 +1,7 @@
78K0R Linker W1.31 Date:13 Jul 2010 Page: 1
78K0R Linker W1.31 Date:14 Jul 2010 Page: 1
Command: -yC:\Program Files\NEC Electronics Tools\DEV -_msgoff -obsr.l
mf ..\..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10
@ -24,8 +24,8 @@ Direc-file:bsr_mcu.dr
*** Link information ***
66 output segment(s)
3CE9H byte(s) real data
5453 symbol(s) defined
3D2DH byte(s) real data
5403 symbol(s) defined
*** Memory map ***
@ -48,8 +48,6 @@ Direc-file:bsr_mcu.dr
LDR_CNSL WDT 00002H 00000H
LDR_CNSL 00002H 00000H CSEG PAGE64KP
LDR_CNSL i2c_mcu 00002H 00000H
LDR_CNSL 00002H 00000H CSEG PAGE64KP
LDR_CNSL rtc 00002H 00000H
LDR_CNSL 00002H 00000H CSEG PAGE64KP
LDR_CNSL self_flash
00002H 00000H
@ -88,57 +86,55 @@ Direc-file:bsr_mcu.dr
LDR_CODL main 000C4H 00000H
LDR_CODL WDT 000C4H 00000H
LDR_CODL i2c_mcu 000C4H 00000H
LDR_CODL rtc 000C4H 00000H
LDR_CODL self_flash
000C4H 00000H
?CSEGSI 000C4H 0000AH CSEG
?OCDSTAD 000CEH 0000AH CSEG
LDR_CODE 000D8H 00912H CSEG
LDR_CODE 000D8H 0087BH CSEG
LDR_CODE loader 000D8H 001E0H
LDR_CODE main 002B8H 0006EH
LDR_CODE WDT 00326H 00000H
LDR_CODE i2c_mcu 00326H 002AAH
LDR_CODE rtc 005D0H 000E0H
LDR_CODE i2c_mcu 00326H 002F1H
LDR_CODE self_flash
006B0H 0033AH
FSL_CODE 009EAH 00322H CSEG
00617H 0033CH
FSL_CODE 00953H 00322H CSEG
FSL_CODE fsl_block_cmd
009EAH 0002BH
00953H 0002BH
FSL_CODE fsl_block_check
00A15H 00013H
0097EH 00013H
FSL_CODE fsl_common
00A28H 0014FH
00991H 0014FH
FSL_CODE fsl_reset
00B77H 00001H
00AE0H 00001H
FSL_CODE fsl_si_ibf
00B78H 00064H
00AE1H 00064H
FSL_CODE fsl_phySwap
00BDCH 0004DH
00B45H 0004DH
FSL_CODE fsl_si_common
00C29H 00061H
FSL_CODE fsl_swap 00C8AH 00030H
00B92H 00061H
FSL_CODE fsl_swap 00BF3H 00030H
FSL_CODE fsl_write
00CBAH 00052H
@@LCODE 00D0CH 002AFH CSEG
@@LCODE @cstart 00D0CH 0006DH
@@LCODE @imul 00D79H 00011H
@@LCODE @lumul 00D8AH 0002BH
@@LCODE @isdiv 00DB5H 00022H
@@LCODE @iudiv 00DD7H 0002DH
@@LCODE @isrem 00E04H 00021H
@@LCODE @iurem 00E25H 0002FH
@@LCODE @lsdiv 00E54H 00039H
@@LCODE @ludiv 00E8DH 0003FH
@@LCODE @divuw 00ECCH 00034H
@@LCODE @ladd 00F00H 0000FH
@@LCODE @llsh 00F0FH 0001BH
@@LCODE @lursh 00F2AH 0001FH
@@LCODE @iscmp 00F49H 0000CH
@@LCODE @lscmp 00F55H 00014H
@@LCODE @lband 00F69H 00014H
@@LCODE @bcdtob 00F7DH 0001AH
@@LCODE @bbcd 00F97H 00024H
* gap * 00FBBH 0003BH
00C23H 00052H
@@LCODE 00C75H 002AFH CSEG
@@LCODE @cstart 00C75H 0006DH
@@LCODE @imul 00CE2H 00011H
@@LCODE @lumul 00CF3H 0002BH
@@LCODE @isdiv 00D1EH 00022H
@@LCODE @iudiv 00D40H 0002DH
@@LCODE @isrem 00D6DH 00021H
@@LCODE @iurem 00D8EH 0002FH
@@LCODE @lsdiv 00DBDH 00039H
@@LCODE @ludiv 00DF6H 0003FH
@@LCODE @divuw 00E35H 00034H
@@LCODE @ladd 00E69H 0000FH
@@LCODE @llsh 00E78H 0001BH
@@LCODE @lursh 00E93H 0001FH
@@LCODE @iscmp 00EB2H 0000CH
@@LCODE @lscmp 00EBEH 00014H
@@LCODE @lband 00ED2H 00014H
@@LCODE @bcdtob 00EE6H 0001AH
@@LCODE @bbcd 00F00H 00024H
* gap * 00F24H 000D2H
MGC_LOAD 00FF6H 0000AH CSEG AT
MGC_LOAD magic 00FF6H 0000AH
@ -156,6 +152,8 @@ Direc-file:bsr_mcu.dr
@@CNSTL i2c_twl 02000H 00000H
@@CNSTL 02000H 00000H CSEG PAGE64KP
@@CNSTL led 02000H 00000H
@@CNSTL 02000H 00000H CSEG PAGE64KP
@@CNSTL rtc 02000H 00000H
@@CNSTL 02000H 00000H CSEG PAGE64KP
@@CNSTL vreg_ctr 02000H 00000H
@@CNSTL 02000H 00000H CSEG PAGE64KP
@ -188,7 +186,7 @@ Direc-file:bsr_mcu.dr
@@CNSTL @bcdtob 02000H 0000AH
@@CNSTL 0200AH 00010H CSEG PAGE64KP
@@CNSTL @bbcd 0200AH 00010H
@@R_INIT 0201AH 0003CH CSEG UNIT64KP
@@R_INIT 0201AH 00038H CSEG UNIT64KP
@@R_INIT @cstart 0201AH 00000H
@@R_INIT loader 0201AH 00000H
@@R_INIT pm 0201AH 00002H
@ -203,220 +201,222 @@ Direc-file:bsr_mcu.dr
@@R_INIT vreg_ctr 02024H 00000H
@@R_INIT vreg_twl 02024H 00000H
@@R_INIT adc 02024H 0000AH
@@R_INIT renge 0202EH 00018H
@@R_INIT accero 02046H 00000H
@@R_INIT renge 0202EH 00016H
@@R_INIT accero 02044H 00000H
@@R_INIT self_flash
02046H 00000H
@@R_INIT sw 02046H 00002H
02044H 00000H
@@R_INIT sw 02044H 00002H
@@R_INIT task_debug
02048H 00002H
02046H 00000H
@@R_INIT task_misc
0204AH 00000H
@@R_INIT task_sys 0204AH 00002H
02046H 00000H
@@R_INIT task_sys 02046H 00002H
@@R_INIT pedo_alg_thre_det2
0204CH 00008H
@@R_INIT ini_VECT 02054H 00000H
02048H 00008H
@@R_INIT ini_VECT 02050H 00000H
@@R_INIT task_status
02054H 00002H
@@R_INIT @rom 02056H 00000H
@@R_INIS 02056H 00000H CSEG UNIT64KP
@@R_INIS @cstart 02056H 00000H
@@R_INIS loader 02056H 00000H
@@R_INIS pm 02056H 00000H
@@R_INIS i2c_ctr 02056H 00000H
@@R_INIS main 02056H 00000H
@@R_INIS magic 02056H 00000H
@@R_INIS WDT 02056H 00000H
@@R_INIS i2c_mcu 02056H 00000H
@@R_INIS i2c_twl 02056H 00000H
@@R_INIS led 02056H 00000H
@@R_INIS rtc 02056H 00000H
@@R_INIS vreg_ctr 02056H 00000H
@@R_INIS vreg_twl 02056H 00000H
@@R_INIS adc 02056H 00000H
@@R_INIS renge 02056H 00000H
@@R_INIS accero 02056H 00000H
02050H 00002H
@@R_INIT @rom 02052H 00000H
@@R_INIS 02052H 00000H CSEG UNIT64KP
@@R_INIS @cstart 02052H 00000H
@@R_INIS loader 02052H 00000H
@@R_INIS pm 02052H 00000H
@@R_INIS i2c_ctr 02052H 00000H
@@R_INIS main 02052H 00000H
@@R_INIS magic 02052H 00000H
@@R_INIS WDT 02052H 00000H
@@R_INIS i2c_mcu 02052H 00000H
@@R_INIS i2c_twl 02052H 00000H
@@R_INIS led 02052H 00000H
@@R_INIS rtc 02052H 00000H
@@R_INIS vreg_ctr 02052H 00000H
@@R_INIS vreg_twl 02052H 00000H
@@R_INIS adc 02052H 00000H
@@R_INIS renge 02052H 00000H
@@R_INIS accero 02052H 00000H
@@R_INIS self_flash
02056H 00000H
@@R_INIS sw 02056H 00000H
02052H 00000H
@@R_INIS sw 02052H 00000H
@@R_INIS task_debug
02056H 00000H
02052H 00000H
@@R_INIS task_misc
02056H 00000H
@@R_INIS task_sys 02056H 00000H
02052H 00000H
@@R_INIS task_sys 02052H 00000H
@@R_INIS pedo_alg_thre_det2
02056H 00000H
@@R_INIS ini_VECT 02056H 00000H
02052H 00000H
@@R_INIS ini_VECT 02052H 00000H
@@R_INIS task_status
02056H 00000H
@@R_INIS @rom 02056H 00000H
@@CALT 02056H 00000H CSEG
@@CALT @cstart 02056H 00000H
@@CALT loader 02056H 00000H
@@CALT pm 02056H 00000H
@@CALT i2c_ctr 02056H 00000H
@@CALT main 02056H 00000H
@@CALT magic 02056H 00000H
@@CALT WDT 02056H 00000H
@@CALT i2c_mcu 02056H 00000H
@@CALT i2c_twl 02056H 00000H
@@CALT led 02056H 00000H
@@CALT rtc 02056H 00000H
@@CALT vreg_ctr 02056H 00000H
@@CALT vreg_twl 02056H 00000H
@@CALT adc 02056H 00000H
@@CALT renge 02056H 00000H
@@CALT accero 02056H 00000H
02052H 00000H
@@R_INIS @rom 02052H 00000H
@@CALT 02052H 00000H CSEG
@@CALT @cstart 02052H 00000H
@@CALT loader 02052H 00000H
@@CALT pm 02052H 00000H
@@CALT i2c_ctr 02052H 00000H
@@CALT main 02052H 00000H
@@CALT magic 02052H 00000H
@@CALT WDT 02052H 00000H
@@CALT i2c_mcu 02052H 00000H
@@CALT i2c_twl 02052H 00000H
@@CALT led 02052H 00000H
@@CALT rtc 02052H 00000H
@@CALT vreg_ctr 02052H 00000H
@@CALT vreg_twl 02052H 00000H
@@CALT adc 02052H 00000H
@@CALT renge 02052H 00000H
@@CALT accero 02052H 00000H
@@CALT self_flash
02056H 00000H
@@CALT sw 02056H 00000H
02052H 00000H
@@CALT sw 02052H 00000H
@@CALT task_debug
02056H 00000H
02052H 00000H
@@CALT task_misc
02056H 00000H
@@CALT task_sys 02056H 00000H
02052H 00000H
@@CALT task_sys 02052H 00000H
@@CALT pedo_alg_thre_det2
02056H 00000H
@@CALT ini_VECT 02056H 00000H
02052H 00000H
@@CALT ini_VECT 02052H 00000H
@@CALT task_status
02056H 00000H
@@RLINIT 02056H 00000H CSEG UNIT64KP
@@RLINIT loader 02056H 00000H
@@RLINIT pm 02056H 00000H
@@RLINIT i2c_ctr 02056H 00000H
@@RLINIT main 02056H 00000H
@@RLINIT magic 02056H 00000H
@@RLINIT WDT 02056H 00000H
@@RLINIT i2c_mcu 02056H 00000H
@@RLINIT i2c_twl 02056H 00000H
@@RLINIT led 02056H 00000H
@@RLINIT rtc 02056H 00000H
@@RLINIT vreg_ctr 02056H 00000H
@@RLINIT vreg_twl 02056H 00000H
@@RLINIT adc 02056H 00000H
@@RLINIT renge 02056H 00000H
@@RLINIT accero 02056H 00000H
02052H 00000H
@@RLINIT 02052H 00000H CSEG UNIT64KP
@@RLINIT loader 02052H 00000H
@@RLINIT pm 02052H 00000H
@@RLINIT i2c_ctr 02052H 00000H
@@RLINIT main 02052H 00000H
@@RLINIT magic 02052H 00000H
@@RLINIT WDT 02052H 00000H
@@RLINIT i2c_mcu 02052H 00000H
@@RLINIT i2c_twl 02052H 00000H
@@RLINIT led 02052H 00000H
@@RLINIT rtc 02052H 00000H
@@RLINIT vreg_ctr 02052H 00000H
@@RLINIT vreg_twl 02052H 00000H
@@RLINIT adc 02052H 00000H
@@RLINIT renge 02052H 00000H
@@RLINIT accero 02052H 00000H
@@RLINIT self_flash
02056H 00000H
@@RLINIT sw 02056H 00000H
02052H 00000H
@@RLINIT sw 02052H 00000H
@@RLINIT task_debug
02056H 00000H
02052H 00000H
@@RLINIT task_misc
02056H 00000H
@@RLINIT task_sys 02056H 00000H
02052H 00000H
@@RLINIT task_sys 02052H 00000H
@@RLINIT pedo_alg_thre_det2
02056H 00000H
@@RLINIT ini_VECT 02056H 00000H
02052H 00000H
@@RLINIT ini_VECT 02052H 00000H
@@RLINIT task_status
02056H 00000H
@@RLINIT @rom 02056H 00000H
@@CODEL 02056H 00000H CSEG
@@CODEL pm 02056H 00000H
@@CODEL i2c_ctr 02056H 00000H
@@CODEL magic 02056H 00000H
@@CODEL i2c_twl 02056H 00000H
@@CODEL led 02056H 00000H
@@CODEL vreg_ctr 02056H 00000H
@@CODEL vreg_twl 02056H 00000H
@@CODEL adc 02056H 00000H
@@CODEL renge 02056H 00000H
@@CODEL accero 02056H 00000H
@@CODEL sw 02056H 00000H
02052H 00000H
@@RLINIT @rom 02052H 00000H
@@CODEL 02052H 00000H CSEG
@@CODEL pm 02052H 00000H
@@CODEL i2c_ctr 02052H 00000H
@@CODEL magic 02052H 00000H
@@CODEL i2c_twl 02052H 00000H
@@CODEL led 02052H 00000H
@@CODEL rtc 02052H 00000H
@@CODEL vreg_ctr 02052H 00000H
@@CODEL vreg_twl 02052H 00000H
@@CODEL adc 02052H 00000H
@@CODEL renge 02052H 00000H
@@CODEL accero 02052H 00000H
@@CODEL sw 02052H 00000H
@@CODEL task_debug
02056H 00000H
02052H 00000H
@@CODEL task_misc
02056H 00000H
@@CODEL task_sys 02056H 00000H
02052H 00000H
@@CODEL task_sys 02052H 00000H
@@CODEL pedo_alg_thre_det2
02056H 00000H
@@CODEL ini_VECT 02056H 00000H
02052H 00000H
@@CODEL ini_VECT 02052H 00000H
@@CODEL task_status
02056H 00000H
@@LCODEL 02056H 00008H CSEG
@@LCODEL abs 02056H 00008H
* gap * 0205EH 000A2H
02052H 00000H
@@LCODEL 02052H 00008H CSEG
@@LCODEL abs 02052H 00008H
* gap * 0205AH 000A6H
MGC_MIMI 02100H 0000AH CSEG AT
MGC_MIMI magic 02100H 0000AH
@@CNST 0210AH 002AEH CSEG
@@CNST 0210AH 002BAH CSEG
@@CNST @cstart 0210AH 00000H
@@CNST loader 0210AH 00000H
@@CNST pm 0210AH 00212H
@@CNST i2c_ctr 0231CH 00000H
@@CNST main 0231CH 00000H
@@CNST magic 0231CH 00000H
@@CNST WDT 0231CH 00000H
@@CNST i2c_mcu 0231CH 00000H
@@CNST i2c_twl 0231CH 00000H
@@CNST led 0231CH 00010H
@@CNST rtc 0232CH 00000H
@@CNST vreg_ctr 0232CH 00000H
@@CNST vreg_twl 0232CH 00000H
@@CNST adc 0232CH 00040H
@@CNST renge 0236CH 00000H
@@CNST accero 0236CH 00000H
@@CNST pm 0210AH 0020EH
@@CNST i2c_ctr 02318H 00000H
@@CNST main 02318H 00000H
@@CNST magic 02318H 00000H
@@CNST WDT 02318H 00000H
@@CNST i2c_mcu 02318H 00000H
@@CNST i2c_twl 02318H 00000H
@@CNST led 02318H 00020H
@@CNST rtc 02338H 00000H
@@CNST vreg_ctr 02338H 00000H
@@CNST vreg_twl 02338H 00000H
@@CNST adc 02338H 00040H
@@CNST renge 02378H 00000H
@@CNST accero 02378H 00000H
@@CNST self_flash
0236CH 00002H
@@CNST sw 0236EH 00000H
02378H 00002H
@@CNST sw 0237AH 00000H
@@CNST task_debug
0236EH 00000H
0237AH 00000H
@@CNST task_misc
0236EH 00000H
@@CNST task_sys 0236EH 00000H
0237AH 00000H
@@CNST task_sys 0237AH 00000H
@@CNST pedo_alg_thre_det2
0236EH 0004AH
@@CNST ini_VECT 023B8H 00000H
0237AH 0004AH
@@CNST ini_VECT 023C4H 00000H
@@CNST task_status
023B8H 00000H
ROM_CODE 023B8H 025C1H CSEG
ROM_CODE pm 023B8H 009C6H
ROM_CODE i2c_ctr 02D7EH 00060H
ROM_CODE i2c_twl 02DDEH 0005EH
ROM_CODE led 02E3CH 004BAH
ROM_CODE vreg_ctr 032F6H 00444H
ROM_CODE vreg_twl 0373AH 00163H
ROM_CODE adc 0389DH 002B5H
ROM_CODE renge 03B52H 001C3H
ROM_CODE accero 03D15H 0013DH
ROM_CODE sw 03E52H 000F3H
023C4H 00000H
ROM_CODE 023C4H 02694H CSEG
ROM_CODE pm 023C4H 009AAH
ROM_CODE i2c_ctr 02D6EH 00060H
ROM_CODE i2c_twl 02DCEH 0005EH
ROM_CODE led 02E2CH 004F3H
ROM_CODE rtc 0331FH 000E0H
ROM_CODE vreg_ctr 033FFH 00444H
ROM_CODE vreg_twl 03843H 00163H
ROM_CODE adc 039A6H 0029FH
ROM_CODE renge 03C45H 001C3H
ROM_CODE accero 03E08H 0013DH
ROM_CODE sw 03F45H 000F3H
ROM_CODE task_debug
03F45H 0001BH
04038H 00001H
ROM_CODE task_misc
03F60H 001BAH
ROM_CODE task_sys 0411AH 00305H
04039H 001BAH
ROM_CODE task_sys 041F3H 0030BH
ROM_CODE pedo_alg_thre_det2
0441FH 004D5H
044FEH 004D5H
ROM_CODE task_status
048F4H 00085H
@@BASE 04979H 004E7H CSEG BASE
@@BASE loader 04979H 00000H
@@BASE pm 04979H 00043H
@@BASE i2c_ctr 049BCH 00183H
@@BASE main 04B3FH 00000H
@@BASE magic 04B3FH 00000H
@@BASE WDT 04B3FH 00000H
@@BASE i2c_mcu 04B3FH 000D9H
@@BASE i2c_twl 04C18H 000CDH
@@BASE led 04CE5H 00000H
@@BASE rtc 04CE5H 00043H
@@BASE vreg_ctr 04D28H 00000H
@@BASE vreg_twl 04D28H 00000H
@@BASE adc 04D28H 000B3H
@@BASE renge 04DDBH 00000H
@@BASE accero 04DDBH 0004AH
049D3H 00085H
@@BASE 04A58H 004E7H CSEG BASE
@@BASE loader 04A58H 00000H
@@BASE pm 04A58H 00043H
@@BASE i2c_ctr 04A9BH 00183H
@@BASE main 04C1EH 00000H
@@BASE magic 04C1EH 00000H
@@BASE WDT 04C1EH 00000H
@@BASE i2c_mcu 04C1EH 000D9H
@@BASE i2c_twl 04CF7H 000CDH
@@BASE led 04DC4H 00000H
@@BASE rtc 04DC4H 00043H
@@BASE vreg_ctr 04E07H 00000H
@@BASE vreg_twl 04E07H 00000H
@@BASE adc 04E07H 000B3H
@@BASE renge 04EBAH 00000H
@@BASE accero 04EBAH 0004AH
@@BASE self_flash
04E25H 00000H
@@BASE sw 04E25H 00000H
04F04H 00000H
@@BASE sw 04F04H 00000H
@@BASE task_debug
04E25H 00000H
04F04H 00000H
@@BASE task_misc
04E25H 00000H
@@BASE task_sys 04E25H 00000H
04F04H 00000H
@@BASE task_sys 04F04H 00000H
@@BASE pedo_alg_thre_det2
04E25H 00000H
@@BASE ini_VECT 04E25H 0003BH
04F04H 00000H
@@BASE ini_VECT 04F04H 0003BH
@@BASE task_status
04E60H 00000H
* gap * 04E60H 00196H
04F3FH 00000H
* gap * 04F3FH 000B7H
MGC_TAIL 04FF6H 0000AH CSEG AT
MGC_TAIL magic 04FF6H 0000AH
@ -432,20 +432,20 @@ Direc-file:bsr_mcu.dr
@@DATA main FF91CH 0021EH
@@DATA magic FFB3AH 00000H
@@DATA WDT FFB3AH 00000H
@@DATA i2c_mcu FFB3AH 00008H
@@DATA i2c_twl FFB42H 00000H
@@DATA led FFB42H 00088H
@@DATA rtc FFBCAH 00008H
@@DATA vreg_ctr FFBD2H 00056H
@@DATA vreg_twl FFC28H 00010H
@@DATA adc FFC38H 00016H
@@DATA renge FFC4EH 00016H
@@DATA accero FFC64H 00002H
@@DATA i2c_mcu FFB3AH 0000AH
@@DATA i2c_twl FFB44H 00000H
@@DATA led FFB44H 00088H
@@DATA rtc FFBCCH 00008H
@@DATA vreg_ctr FFBD4H 00056H
@@DATA vreg_twl FFC2AH 00010H
@@DATA adc FFC3AH 00016H
@@DATA renge FFC50H 00016H
@@DATA accero FFC66H 00002H
@@DATA self_flash
FFC66H 00002H
@@DATA sw FFC68H 00004H
FFC68H 00002H
@@DATA sw FFC6AH 00004H
@@DATA task_debug
FFC6CH 00002H
FFC6EH 00000H
@@DATA task_misc
FFC6EH 00002H
@@DATA task_sys FFC70H 00002H
@ -455,7 +455,7 @@ Direc-file:bsr_mcu.dr
@@DATA task_status
FFD04H 00002H
@@DATA @rom FFD06H 00000H
@@INIT FFD06H 0003CH DSEG BASEP
@@INIT FFD06H 00038H DSEG BASEP
@@INIT @cstart FFD06H 00000H
@@INIT loader FFD06H 00000H
@@INIT pm FFD06H 00002H
@ -470,148 +470,148 @@ Direc-file:bsr_mcu.dr
@@INIT vreg_ctr FFD10H 00000H
@@INIT vreg_twl FFD10H 00000H
@@INIT adc FFD10H 0000AH
@@INIT renge FFD1AH 00018H
@@INIT accero FFD32H 00000H
@@INIT renge FFD1AH 00016H
@@INIT accero FFD30H 00000H
@@INIT self_flash
FFD32H 00000H
@@INIT sw FFD32H 00002H
FFD30H 00000H
@@INIT sw FFD30H 00002H
@@INIT task_debug
FFD34H 00002H
FFD32H 00000H
@@INIT task_misc
FFD36H 00000H
@@INIT task_sys FFD36H 00002H
FFD32H 00000H
@@INIT task_sys FFD32H 00002H
@@INIT pedo_alg_thre_det2
FFD38H 00008H
@@INIT ini_VECT FFD40H 00000H
FFD34H 00008H
@@INIT ini_VECT FFD3CH 00000H
@@INIT task_status
FFD40H 00002H
@@INIT @rom FFD42H 00000H
@@INIS FFD42H 00000H DSEG UNITP
@@INIS @cstart FFD42H 00000H
@@INIS loader FFD42H 00000H
@@INIS pm FFD42H 00000H
@@INIS i2c_ctr FFD42H 00000H
@@INIS main FFD42H 00000H
@@INIS magic FFD42H 00000H
@@INIS WDT FFD42H 00000H
@@INIS i2c_mcu FFD42H 00000H
@@INIS i2c_twl FFD42H 00000H
@@INIS led FFD42H 00000H
@@INIS rtc FFD42H 00000H
@@INIS vreg_ctr FFD42H 00000H
@@INIS vreg_twl FFD42H 00000H
@@INIS adc FFD42H 00000H
@@INIS renge FFD42H 00000H
@@INIS accero FFD42H 00000H
FFD3CH 00002H
@@INIT @rom FFD3EH 00000H
@@INIS FFD3EH 00000H DSEG UNITP
@@INIS @cstart FFD3EH 00000H
@@INIS loader FFD3EH 00000H
@@INIS pm FFD3EH 00000H
@@INIS i2c_ctr FFD3EH 00000H
@@INIS main FFD3EH 00000H
@@INIS magic FFD3EH 00000H
@@INIS WDT FFD3EH 00000H
@@INIS i2c_mcu FFD3EH 00000H
@@INIS i2c_twl FFD3EH 00000H
@@INIS led FFD3EH 00000H
@@INIS rtc FFD3EH 00000H
@@INIS vreg_ctr FFD3EH 00000H
@@INIS vreg_twl FFD3EH 00000H
@@INIS adc FFD3EH 00000H
@@INIS renge FFD3EH 00000H
@@INIS accero FFD3EH 00000H
@@INIS self_flash
FFD42H 00000H
@@INIS sw FFD42H 00000H
FFD3EH 00000H
@@INIS sw FFD3EH 00000H
@@INIS task_debug
FFD42H 00000H
FFD3EH 00000H
@@INIS task_misc
FFD42H 00000H
@@INIS task_sys FFD42H 00000H
FFD3EH 00000H
@@INIS task_sys FFD3EH 00000H
@@INIS pedo_alg_thre_det2
FFD42H 00000H
@@INIS ini_VECT FFD42H 00000H
FFD3EH 00000H
@@INIS ini_VECT FFD3EH 00000H
@@INIS task_status
FFD42H 00000H
@@INIS @rom FFD42H 00000H
@@DATS FFD42H 00000H DSEG UNITP
@@DATS @cstart FFD42H 00000H
@@DATS loader FFD42H 00000H
@@DATS pm FFD42H 00000H
@@DATS i2c_ctr FFD42H 00000H
@@DATS main FFD42H 00000H
@@DATS magic FFD42H 00000H
@@DATS WDT FFD42H 00000H
@@DATS i2c_mcu FFD42H 00000H
@@DATS i2c_twl FFD42H 00000H
@@DATS led FFD42H 00000H
@@DATS rtc FFD42H 00000H
@@DATS vreg_ctr FFD42H 00000H
@@DATS vreg_twl FFD42H 00000H
@@DATS adc FFD42H 00000H
@@DATS renge FFD42H 00000H
@@DATS accero FFD42H 00000H
FFD3EH 00000H
@@INIS @rom FFD3EH 00000H
@@DATS FFD3EH 00000H DSEG UNITP
@@DATS @cstart FFD3EH 00000H
@@DATS loader FFD3EH 00000H
@@DATS pm FFD3EH 00000H
@@DATS i2c_ctr FFD3EH 00000H
@@DATS main FFD3EH 00000H
@@DATS magic FFD3EH 00000H
@@DATS WDT FFD3EH 00000H
@@DATS i2c_mcu FFD3EH 00000H
@@DATS i2c_twl FFD3EH 00000H
@@DATS led FFD3EH 00000H
@@DATS rtc FFD3EH 00000H
@@DATS vreg_ctr FFD3EH 00000H
@@DATS vreg_twl FFD3EH 00000H
@@DATS adc FFD3EH 00000H
@@DATS renge FFD3EH 00000H
@@DATS accero FFD3EH 00000H
@@DATS self_flash
FFD42H 00000H
@@DATS sw FFD42H 00000H
FFD3EH 00000H
@@DATS sw FFD3EH 00000H
@@DATS task_debug
FFD42H 00000H
FFD3EH 00000H
@@DATS task_misc
FFD42H 00000H
@@DATS task_sys FFD42H 00000H
FFD3EH 00000H
@@DATS task_sys FFD3EH 00000H
@@DATS pedo_alg_thre_det2
FFD42H 00000H
@@DATS ini_VECT FFD42H 00000H
FFD3EH 00000H
@@DATS ini_VECT FFD3EH 00000H
@@DATS task_status
FFD42H 00000H
@@DATS @rom FFD42H 00000H
FSL_DATA FFD42H 00010H DSEG UNITP
FFD3EH 00000H
@@DATS @rom FFD3EH 00000H
FSL_DATA FFD3EH 00010H DSEG UNITP
FSL_DATA fsl_common
FFD42H 00010H
@@INITL FFD52H 00000H DSEG UNIT64KP
@@INITL loader FFD52H 00000H
@@INITL pm FFD52H 00000H
@@INITL i2c_ctr FFD52H 00000H
@@INITL main FFD52H 00000H
@@INITL magic FFD52H 00000H
@@INITL WDT FFD52H 00000H
@@INITL i2c_mcu FFD52H 00000H
@@INITL i2c_twl FFD52H 00000H
@@INITL led FFD52H 00000H
@@INITL rtc FFD52H 00000H
@@INITL vreg_ctr FFD52H 00000H
@@INITL vreg_twl FFD52H 00000H
@@INITL adc FFD52H 00000H
@@INITL renge FFD52H 00000H
@@INITL accero FFD52H 00000H
FFD3EH 00010H
@@INITL FFD4EH 00000H DSEG UNIT64KP
@@INITL loader FFD4EH 00000H
@@INITL pm FFD4EH 00000H
@@INITL i2c_ctr FFD4EH 00000H
@@INITL main FFD4EH 00000H
@@INITL magic FFD4EH 00000H
@@INITL WDT FFD4EH 00000H
@@INITL i2c_mcu FFD4EH 00000H
@@INITL i2c_twl FFD4EH 00000H
@@INITL led FFD4EH 00000H
@@INITL rtc FFD4EH 00000H
@@INITL vreg_ctr FFD4EH 00000H
@@INITL vreg_twl FFD4EH 00000H
@@INITL adc FFD4EH 00000H
@@INITL renge FFD4EH 00000H
@@INITL accero FFD4EH 00000H
@@INITL self_flash
FFD52H 00000H
@@INITL sw FFD52H 00000H
FFD4EH 00000H
@@INITL sw FFD4EH 00000H
@@INITL task_debug
FFD52H 00000H
FFD4EH 00000H
@@INITL task_misc
FFD52H 00000H
@@INITL task_sys FFD52H 00000H
FFD4EH 00000H
@@INITL task_sys FFD4EH 00000H
@@INITL pedo_alg_thre_det2
FFD52H 00000H
@@INITL ini_VECT FFD52H 00000H
FFD4EH 00000H
@@INITL ini_VECT FFD4EH 00000H
@@INITL task_status
FFD52H 00000H
@@INITL @rom FFD52H 00000H
@@DATAL FFD52H 00000H DSEG UNIT64KP
@@DATAL loader FFD52H 00000H
@@DATAL pm FFD52H 00000H
@@DATAL i2c_ctr FFD52H 00000H
@@DATAL main FFD52H 00000H
@@DATAL magic FFD52H 00000H
@@DATAL WDT FFD52H 00000H
@@DATAL i2c_mcu FFD52H 00000H
@@DATAL i2c_twl FFD52H 00000H
@@DATAL led FFD52H 00000H
@@DATAL rtc FFD52H 00000H
@@DATAL vreg_ctr FFD52H 00000H
@@DATAL vreg_twl FFD52H 00000H
@@DATAL adc FFD52H 00000H
@@DATAL renge FFD52H 00000H
@@DATAL accero FFD52H 00000H
FFD4EH 00000H
@@INITL @rom FFD4EH 00000H
@@DATAL FFD4EH 00000H DSEG UNIT64KP
@@DATAL loader FFD4EH 00000H
@@DATAL pm FFD4EH 00000H
@@DATAL i2c_ctr FFD4EH 00000H
@@DATAL main FFD4EH 00000H
@@DATAL magic FFD4EH 00000H
@@DATAL WDT FFD4EH 00000H
@@DATAL i2c_mcu FFD4EH 00000H
@@DATAL i2c_twl FFD4EH 00000H
@@DATAL led FFD4EH 00000H
@@DATAL rtc FFD4EH 00000H
@@DATAL vreg_ctr FFD4EH 00000H
@@DATAL vreg_twl FFD4EH 00000H
@@DATAL adc FFD4EH 00000H
@@DATAL renge FFD4EH 00000H
@@DATAL accero FFD4EH 00000H
@@DATAL self_flash
FFD52H 00000H
@@DATAL sw FFD52H 00000H
FFD4EH 00000H
@@DATAL sw FFD4EH 00000H
@@DATAL task_debug
FFD52H 00000H
FFD4EH 00000H
@@DATAL task_misc
FFD52H 00000H
@@DATAL task_sys FFD52H 00000H
FFD4EH 00000H
@@DATAL task_sys FFD4EH 00000H
@@DATAL pedo_alg_thre_det2
FFD52H 00000H
@@DATAL ini_VECT FFD52H 00000H
FFD4EH 00000H
@@DATAL ini_VECT FFD4EH 00000H
@@DATAL task_status
FFD52H 00000H
@@DATAL @rom FFD52H 00000H
* gap * FFD52H 000AEH
FFD4EH 00000H
@@DATAL @rom FFD4EH 00000H
* gap * FFD4EH 000B2H
MEMORY=RAM2
BASE ADDRESS=FFE20H SIZE=000C0H

21
trunk/config.h
View File

@ -1,18 +1,19 @@
#ifndef __config__
#define __config__
#define _debug_led_
//#define _FORCE_OFF_1SEC_
//#define _debug_led_
//#define _ALLOW_NOBATT_
//#define _FORCE_INFO_LED_FULLCOLOR_
//#define _DEBUG_BT_IRQ_
//#define _DEBUG_BT_TEMP_
//#define _DBG_PEDO_AUTO_ENABLE_
//#define _DBG_LED_PRINT_
//#define _DEBUG_CODEC_POLLING_
//#define _PMIC_TEST_
#define MCU_VER_MAJOR 0x00
#define MCU_VER_MINOR 0x27
#define MCU_VER_MINOR 0x29
//#define PM_CCIC_TIM
@ -27,28 +28,24 @@
// <20>ªTEG2 CPU <20>{ Type-C
#define _MODEL_CTR_
// <20>ªTS board, WM1,1 TS-CTRC
// <20>ªTS board, WM1,1 TS-CTRC, ŽÀ‹@
// “ÁŽêŽd—l //
//#define _SW_HOME_ENABLE_
// ---------------------------------- //
#ifdef _MODEL_TEG2_
#define _PMIC_TWL_
#define _MCU_KE3_
unsupported!
#endif
#ifdef _MODEL_WM0_
#define _PMIC_TWL_
#define _MCU_BSR_
#define _SW_HOME_ENABLE_
unsupported!
#endif
#ifdef _MODEL_TS0_
#define _PMIC_CTR_
#define _MCU_BSR_
unsupported!
#endif
#ifdef _MODEL_CTR_

BIN
trunk/hoge.bin
View File

Binary file not shown.

47
trunk/i2c_mcu.c
View File

@ -601,3 +601,50 @@ void iic_mcu_stop( )
SAU0EN = 0;
iic_mcu_initialized = 0;
}
/* ========================================================
コーデックに 『１バイト』 ライト
iic_mcu_write_a_byte CODEC不具合ワークアラウンド
======================================================== */
err iic_mcu_write_a_byte_codec( u8 adrs, u8 dat )
{
static u8 count;
// １文字の時はDMAとか起動しないでさっさと終わらせる
if( iic_mcu_wait_free() != ERR_SUCCESS )
{
return( ERR_ERR );
}
// スタートコンディションとスレーブの呼び出し...
IICMK10 = 1;
if( iic_mcu_call_slave( IIC_SLA_CODEC ) != ERR_SUCCESS )
{
iic_mcu_busy = 0;
return ( ERR_NOSLAVE );
}
iic_mcu_send_a_byte( adrs );
iic_mcu_send_a_byte( dat );
// ワークアラウンドここから
/// リスタートにしてダミーライト
iic_mcu_send_re_st( );
iic_mcu_send_a_byte( IIC_SLA_CODEC ); // ダミーライト
iic_mcu_send_a_byte( 0x20 );
iic_mcu_send_a_byte( count );
count++;
iic_mcu_send_sp( );
iic_mcu_busy = 0;
return ( ERR_SUCCESS );
}

2
trunk/i2c_mcu.h
View File

@ -23,6 +23,8 @@ u8 iic_mcu_read_a_byte( u8 SLA, u8 adrs );
err iic_mcu_write( u8 SLA, u8 adrs, u8 len, void * src );
err iic_mcu_write_a_byte( u8 SLA, u8 adrs, u8 dat );
err iic_mcu_write_a_byte_codec( u8 adrs, u8 dat );
// ↓その通信が完了したら解除されます。
#define iic_mcu_set_wo_dma() { while( iic_mcu_busy ){;} iic_mcu_wo_dma = 1; }

167
trunk/led.c
View File

@ -25,33 +25,35 @@
// ========================================================
static void led_pow_normal( );
static void led_pow_sleep( );
static void led_pow_bt_empty();
// スリープ中明滅のテーブル。マジか。
const u8 LED_PTN_SLEEP[] = {
25, 38, 52, 68, 83, 98, 110, 119,
125, 128, 128, 125, 119, 110, 98, 83,
68, 52, 38, 25, 16, 10, 8, 8,
8, 8, 8, 8, 8, 8, 10, 16
};
#define LED_SLEEP_FRAME_LEN 71
#define LED_SLEEP_DIM_LEN 71
#define LED_SLEEP_FRAME_NUM 32
// ========================================================
// お知らせLEDのパターンデータ
uni_info_LED info_LED;
static void led_pow_normal( );
static void led_pow_sleep( );
static void led_pow_bt_empty();
static u8 led_pow_batt_low();
// ========================================================
// 赤LEDの電池残量LEDの点滅パターン
st_led_red_batt_empty led_red_batt_empty = { 0x55, 0x55, 0x55, 0x55 };
// スリープ中明滅のテーブル。マジか。
//const u8 LED_PTN_SLEEP[] = { 8,10,16,25, 36,47,56,62, 64,62,56,47, 36,25,16,10 };
//const u8 LED_PTN_SLEEP[] = { 8,12,24,42,64,86,104,116,120,116,104,86,64,42,24,12 };
//const u8 LED_PTN_SLEEP[] = { 0,5,18,39,64,89,109,123,128,123,109,89,64,39,18,5 };
const u8 LED_PTN_SLEEP[] = { 8,23,38,53,68,83,98,113,128,113,98,83,68,53,38,23 };
#define LED_SLEEP_FRAME_LEN 128
#define LED_SLEEP_DIM_LEN 128
#define LED_SLEEP_FRAME_NUM 16
// お知らせLEDのパターンデータ
uni_info_LED info_LED;
// フルカラーとの自動判別のため、一時領域としてもっておく
bit LED_pow_red_Mirror;
@ -61,6 +63,13 @@ bit info_led_override;
bit cam_led_update;
// 電源LEDのスリープパターンのステータス類
u8 time_to_next_frame_sleep = LED_SLEEP_FRAME_LEN;
u8 frame_sleep;
st_LED_dim_status LED_dim_status_sleep;
// ========================================================
#define led_fade_to( now, goal ) now = fade_to( now, goal )
@ -141,11 +150,7 @@ void LED_init( )
ISC = 0;
TOM0 = 0b0000000011111110; // 出力モード。4はPWM出力しないが1にしないとTO5以降にクロックが届かない
#ifdef _MCU_BSR_
TOL0 = 0b0000000000000000; // 出力を反転させるかフラグ
#else
TOL0 = 0b0000000000000100; // 出力を反転させるかフラグ
#endif
TO0 = 0; // タイマー動作中で、タイマー出力にしてないときのピンのラッチ。タイマー出力を使わないなら０
TOE0 = 0b0000000011101110; // TOxをタイマーモジュールが制御？
@ -159,9 +164,6 @@ void LED_init( )
system_status.info_fullcolor = 0;
if( system_status.model == MODEL_TS_BOARD )
{
#ifdef _FORCE_INFO_LED_FULLCOLOR_
system_status.info_fullcolor = 1;
#endif
}
else
{
@ -221,6 +223,7 @@ void tsk_led_pow( )
switch ( vreg_ctr[VREG_C_LED_POW] )
{
case ( LED_POW_ILM_AUTO ):
default:
led_pow_normal( );
break;
@ -229,8 +232,8 @@ void tsk_led_pow( )
break;
case ( LED_POW_ILM_ON ):
default:
led_pow_normal( );
led_fade_to( LED_duty_pow_blu, vreg_ctr[VREG_C_LED_BRIGHT] );
LED_pow_red_Mirror = 0;
break;
case ( LED_POW_ILM_OFF ):
@ -285,11 +288,74 @@ void tsk_led_pow( )
======================================================== */
static void led_pow_normal( )
{
if( vreg_ctr[VREG_C_BT_REMAIN] <= BATT_TH_EMPTY )
time_to_next_frame_sleep = LED_SLEEP_FRAME_LEN;
frame_sleep = 0;
LED_dim_status_sleep.now = (sx16)LED_duty_pow_blu * 128;
if( led_pow_batt_low() != 0 )
{
led_pow_bt_empty();
return;
// おしまい
}
else if( vreg_ctr[VREG_C_BT_REMAIN] <= BATT_TH_LO )
// 青点灯
led_fade_to( LED_duty_pow_blu, vreg_ctr[VREG_C_LED_BRIGHT] );
}
/* ========================================================
ホタルパターン
電池残量で赤→赤点滅にする
======================================================== */
static void led_pow_sleep( )
{
if( led_pow_batt_low() != 0 )
{
time_to_next_frame_sleep = LED_SLEEP_FRAME_LEN;
frame_sleep = 0;
LED_dim_status_sleep.now = (sx16)LED_duty_pow_blu * 128;
return;
// おしまい
}
LED_dim_status_sleep.to = LED_PTN_SLEEP[frame_sleep] * 128;
// グラデーションのデルタを計算
LED_dim_status_sleep.delta = (( LED_dim_status_sleep.to - LED_dim_status_sleep.now ) ) / LED_SLEEP_DIM_LEN;
led_fade_to2( LED_duty_pow_blu, &LED_dim_status_sleep );
// 次のフレームに進める？
time_to_next_frame_sleep -= 1;
if( time_to_next_frame_sleep == 0 )
{
time_to_next_frame_sleep = LED_SLEEP_FRAME_LEN;
frame_sleep += 1;
if( frame_sleep >= LED_SLEEP_FRAME_NUM -1 )
{
frame_sleep = 0;
}
}
}
/* ========================================================
電池が少ないときの共通
　返値：　0　電池が少なくなかった
　　　　　1　　　　少なかったので共通パターンにした
======================================================== */
static u8 led_pow_batt_low()
{
if( vreg_ctr[VREG_C_BT_REMAIN] > BATT_TH_LO )
{
LED_pow_red_Mirror = 0;
return 0;
// おしまい
}
if( vreg_ctr[VREG_C_BT_REMAIN] > BATT_TH_EMPTY )
{
// 赤点灯
led_fade_to( LED_duty_pow_blu, 0 );
@ -297,13 +363,19 @@ static void led_pow_normal( )
}
else
{
// 青点灯
led_fade_to( LED_duty_pow_blu, vreg_ctr[VREG_C_LED_BRIGHT] );
LED_pow_red_Mirror = 0;
led_pow_bt_empty();
}
return 1;
}
/* ========================================================
　電池がないパターン
　　指定パターンを流す
　　お知らせを上書きしたりする
======================================================== */
static void led_pow_bt_empty()
{
static u8 delay;
@ -338,35 +410,6 @@ static void led_pow_bt_empty()
}
/* ========================================================
ホタルパターン
電池残量で赤→赤点滅にする
======================================================== */
static void led_pow_sleep( )
{
static u8 time_to_next_frame;
static u8 frame;
static st_LED_dim_status LED_dim_status;
LED_dim_status.to = LED_PTN_SLEEP[frame] * 128;
// グラデーションのデルタを計算
LED_dim_status.delta = (( LED_dim_status.to - LED_dim_status.now ) ) / LED_SLEEP_DIM_LEN;
led_fade_to2( LED_duty_pow_blu, &LED_dim_status );
// 次のフレームに進める？
time_to_next_frame -= 1;
if( time_to_next_frame == 0 )
{
time_to_next_frame = LED_SLEEP_FRAME_LEN;
frame += 1;
if( frame >= LED_SLEEP_FRAME_NUM -1 )
{
frame = 0;
}
}
}

85
trunk/loader.c
View File

@ -125,11 +125,6 @@ void main( )
{
if( ( my_resf & 0x10 ) != 0 )
{
#ifdef _PMIC_TWL_
// 暴走してしまうので再起動させる
PM_reset_ast();
/// hdwinit2 内で解除する
#endif
vreg_ctr[ VREG_C_MCU_STATUS ] |= REG_BIT_STATUS_WDT_RESET;
// set_irq( VREG_C_IRQ0, REG_BIT_IRQ_WDT_RESET );
// ↑I2Cの初期化後に行う
@ -158,10 +153,9 @@ void hdwinit( void )
DI( ); /* マスタ割り込み禁止 */
CMC = 0b00010000; /* X1発振せず(入力ポート)、XT1使用、超低電力発振は不安定に付き通常で */
// CMC = 0b00010100; /* ↑超低電力発振（不安定に付き使うな）*/
CSC = 0b10000000; /* X1発振なし、XT1発振あり、高速内蔵発振動作 */
#ifdef _MCU_BSR_
OSMC = 0x01; /* 隠しレジスタ */
#endif
CKC = 0b00001000; /* CPU/周辺クロック=fMAIN、fMAIN=fMX、fCLK=fMX */
/*--- 低電圧検出回路の設定 ---*/
@ -178,26 +172,9 @@ void hdwinit2( )
// ポート設定 /////////////////////////////////////////
if( system_status.reboot ) // リセットピンだけはすぐにセットする
{
#ifdef _MODEL_TEG2_
P0 = 0b00000011;
P3 = 0b00000110; // 簡易I2Cは出力ラッチを1にする
P14 = 0b00000001;
#endif
#ifdef _MODEL_WM0_
P0 = 0b00000011;
P3 = 0b00000110; // 簡易I2Cは出力ラッチを1にする
P14 = 0b00000001;
#endif
#ifdef _MODEL_TS0_
P0 = 0b00000011;
P3 = 0b00000111; // 簡易I2Cは出力ラッチを1にする
P14 = 0b00000000;
#endif
#ifdef _MODEL_CTR_
P0 = 0b00000011;
P3 = 0b00000111; // 簡易I2Cは出力ラッチを1にする
P14 = 0b00000000;
#endif
}
else
{
@ -207,36 +184,13 @@ void hdwinit2( )
}
#ifdef _MCU_BSR_
PM20 = 0b11111100;
#else
PM8 = 0b11111111;
#endif
#ifdef _MCU_BSR_
P20 = 0b00000000;
#else
P8 = 0b00000000;
#endif
#ifdef _MCU_BSR_
# ifdef _MODEL_CTR_
# ifdef _SW_HOME_ENABLE_
PU20 = 0b00010001;
# else
PU20 = 0b00000001;
# endif
# else
PU20 = 0b00000000;
# endif
#endif
#ifdef _MCU_BSR_
PM0 = 0b11111111; // BSRマイコンでは、reset1は監視のみになる。
#else
PM0 = 0b00000000; // 0で出力
#endif
PM3 = 0b11110000; // P31,32は簡易I2C
PM14 = 0b11111100; // debugger[1] とりあえず出力
@ -253,18 +207,10 @@ void hdwinit2( )
PM1 = 0b00000000;
PM2 = 0b11101001;
#ifdef _PMIC_CTR_
PM4 = 0b11110011;
#else
PM4 = 0b11111011;
#endif
PM5 = 0b11110010;
PM6 = 0b11111100; // I2CのラインがL出力になってしまうが、システムがOFFなのでかまわない
#ifdef _PMIC_CTR_
PM7 = 0b01011111;
#else
PM7 = 0b00011111;
#endif
PM12 = 0b11111111; // 32kHzクロックのピン設定はどっちでもよい
PM15 = 0b11111111;
@ -295,20 +241,12 @@ void hdwinit2( )
/*--- 割り込み設定 ---------*/
IF0 = 0x0000; /* 割り込み要求フラグクリア */
IF1 = 0x0000;
#ifdef _MCU_BSR_
IF2 = 0x0000;
#else
IF2L = 0x00;
#endif
MK0 = 0xFFFF; /* 割り込み禁止 */
MK1 = 0xFFFF;
#ifdef _MCU_BSR_
MK2 = 0xFFFF;
#else
MK2L = 0xFF;
#endif
#if 0
// デフォルト値
@ -323,15 +261,11 @@ void hdwinit2( )
#endif
/*--- 外部割込の有効エッジ設定 ---*/
#ifdef _MCU_BSR_
EGP0 = 0b00110001;
EGN0 = 0b01110000;
EGP2 = 0b00001010;
EGN2 = 0b00000000;
#else
EGP0 = 0b10110001;
EGN0 = 0b01110000;
#endif
/*--- キー割り込み設定 ---*/
KRM = 0b00000000; /* 全キー割り込み信号を検出しない */
@ -344,14 +278,6 @@ void hdwinit2( )
// RTCC0 = 0b00000000; /* カウンタ動作停止 */
// 別途初期化関数
#ifndef _MCU_BSR_
/*--- コンパレータ/プログラマブル・ゲイン・アップの動作停止 ---*/
OACMPEN = 0; /* クロック供給停止 */
OAM = 0x00; /* プログラマブル・ゲイン・アップの動作停止 */
C0CTL = 0x00; /* コンパレータ0動作停止 */
C1CTL = 0x00; /* コンパレータ1動作停止 */
#endif
/*--- クロック出力/ブザー出力停止 ---*/
CKS0 = 0b00000000;
CKS1 = 0b00000000;
@ -367,19 +293,12 @@ void hdwinit2( )
SCR02 = 0x0087;
SCR03 = 0x0087;
#ifdef _MCU_BSR_
// IICの動作停止
IICA0EN = 0; /* IICA0(CTR)へのクロック供給停止 */
IICCTL00 = 0x00; /* IICA1動作停止 */
IICA1EN = 0; // IICA1(TWL)へのクロック供給停止
IICCTL01 = 0x00; // IICA1動作停止
#else
/*--- IICAの動作停止 ---*/
IICAEN = 0; /* IICAへのクロック供給停止 */
IICCTL0 = 0x00; /* IICA動作停止 */
#endif
/*--- DMAの動作停止 ---*/
DRC0 = 0b00000000; /* DMAチャネル0の動作禁止 */
DRC1 = 0b00000000; /* DMAチャネル1の動作禁止 */

10
trunk/pm.c
View File

@ -626,7 +626,7 @@ void BT_get_left(){
if( bt_remain_old != flag )
{
bt_remain_old = flag;
iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_BT, flag );
iic_mcu_write_a_byte_codec( CODEC_REG_BT, flag );
}
}
}
@ -871,11 +871,11 @@ err PM_sys_pow_on( )
RESET2_neg;
{
u8 codec_reg_init[3] = { 0,0,0 };
wait_ms( 100 );
// CODEC 不定レジスタ初期化
iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init );
iic_mcu_write_a_byte_codec( CODEC_REG_PM, 0 );
iic_mcu_write_a_byte_codec( CODEC_REG_PM+1, 0 );
iic_mcu_write_a_byte_codec( CODEC_REG_PM+2, 0 );
reg_shadow = 0; // こんなところで...
}
@ -1063,7 +1063,7 @@ task_status_immed ntr_pmic_comm( )
if( ( reg_shadow & ( REG_BIT_TWL_REQ_OFF_REQ | REG_BIT_TWL_REQ_RST_REQ )) != 0 )
{
reg_shadow &= ~( REG_BIT_TWL_REQ_OFF_REQ | REG_BIT_TWL_REQ_RST_REQ );
iic_mcu_write_a_byte( IIC_SLA_CODEC, CODEC_REG_PM, reg_shadow );
iic_mcu_write_a_byte_codec( CODEC_REG_PM, reg_shadow );
}
return ( ERR_FINISED );
}

4
trunk/renge/renge_task_intval.h
View File

@ -7,7 +7,7 @@
enum TSK
{
TSK_SW, TSK_ADC, TSK_BATT, TSK_LED_POW, TSK_LED_WIFI, TSK_LED_NOTIFY, TSK_LED_CAM, TSK_MISC, TSK_STATUS, TSK_DEBUG, TSK_DEBUG2, TSK_SYS, TSK_LAST
TSK_SW, TSK_ADC, TSK_BATT, TSK_LED_POW, TSK_LED_WIFI, TSK_LED_NOTIFY, TSK_LED_CAM, TSK_MISC, TSK_STATUS, TSK_DEBUG, TSK_SYS, TSK_LAST
};
extern void tsk_sw();
@ -20,7 +20,6 @@ extern void tsk_led_cam();
extern void tsk_misc();
extern void tsk_status();
extern void tsk_debug();
extern void tsk_debug2();
extern void tsk_sys();
const void ( *tasks[ TSK_LAST ] )() = {
@ -34,7 +33,6 @@ const void ( *tasks[ TSK_LAST ] )() = {
tsk_misc,
tsk_status,
tsk_debug,
tsk_debug2,
tsk_sys,
};

1
trunk/renge/renge_tasks.txt
View File

@ -8,5 +8,4 @@ led_cam
misc
status
debug
debug2
sys

2
trunk/rtc.c
View File

@ -5,7 +5,7 @@
#pragma inline
#include "incs_loader.h"
#include "incs.h"

10
trunk/self_flash.c
View File

@ -80,8 +80,8 @@ static err firm_duplicate( u8 block_src, u8 block_dest );
void alert( u8 );
void led_print( u8 );
#else
# define alert() ;
# define led_print() ;
# define alert( x ) ;
# define led_print( x ) ;
#endif
@ -487,10 +487,10 @@ static err firm_duplicate( u8 block_src,
( fsl_u08 ) ( SELF_UPDATE_BUFF_SIZE / SAM_WORD_SIZE ) )
!= FSL_OK )
{
// リカバリはリブート時 todo //
// リカバリはリブート時 //
FSL_Close( );
led_print(5);
while(1){}
// while(1){}
return ( ERR_ERR );
}
}
@ -501,7 +501,7 @@ static err firm_duplicate( u8 block_src,
{
// リカバリはリブート時 todo //
led_print(7);
while(1){}
// while(1){}
return ( ERR_ERR );
}
}

93
trunk/task_debug.c
View File

@ -10,59 +10,41 @@
/* ========================================================
======================================================== */
void tsk_debug( )
{
u8 temp;
static u8 count = 0;
static u8 task_interval;
if( system_status.pwr_state == ON_TRIG ){
#ifdef _MODEL_WM0_
P5.0 = 1; // /WL_RST に配線されています
#endif
#ifndef _MODEL_CTR_
iic_mcu_write_a_byte( IIC_SLA_DCP, 0x08, 0x80 ); // ACR←0x80 揮発モードへ
#endif
#ifdef _DBG_PEDO_AUTO_ENABLE_
vreg_ctr[ VREG_C_ACC_CONFIG ] = 0x03;
renge_task_immed_add( acc_hosu_set );
#endif
/*
temp = iic_mcu_read_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO );
count += 1;
iic_mcu_write_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO, count );
iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 3, count );
*/
}
return;
}
// 7セグ 4バイト版
# define IIC_SLA_DBG_MONITOR 0x44
void tsk_debug2( )
void tsk_debug( )
{
u8 str[4];
// u8 temp;
#ifdef _DBG_PEDO_AUTO_ENABLE_
if( system_status.pwr_state == ON_TRIG ){
// 歩数計を起動時にonにする
vreg_ctr[ VREG_C_ACC_CONFIG ] = 0x03;
renge_task_immed_add( acc_hosu_set );
}
#endif
/*
if( system_status.pwr_state == ON_TRIG ){
{
static u8 count = 0;
// デバッグLED（8bit）の初期化
temp = iic_mcu_read_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO );
count += 1;
iic_mcu_write_a_byte( IIC_SLA_8LEDS, IIC_8LEDS_REG_DO, count );
iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 3, count );
}
}
*/
#ifdef _PMIC_TEST_
if( ( system_status.pwr_state == ON ) || ( system_status.pwr_state == SLEEP ) )
{
/*
str[3] = vreg_ctr[ VREG_C_FREE0 ];
str[2] = vreg_ctr[ VREG_C_FREE1 ];
str[1] = vreg_ctr[ VREG_C_STATUS ];
str[0] = vreg_ctr[ VREG_C_RTC_SEC ];
str[3] = vreg_ctr[ VREG_C_SND_VOL ];
str[2] = vreg_ctr[ VREG_C_TUNE ];
str[1] = vreg_ctr[ VREG_C_ACC_CONFIG ];
str[0] = SEC;
*/
iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 0x03, 0 );
}
#endif
// iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 2, vreg_ctr[ VREG_C_IRQ1 ] );
// iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, boot_ura );
@ -74,13 +56,30 @@ void tsk_debug2( )
// iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 1, vreg_ctr[ VREG_C_STATUS ] );
// iic_mcu_write_a_byte( IIC_SLA_DBG_MONITOR, 0, vreg_ctr[ VREG_C_ACC_ZH ] );
// iic_mcu_write( IIC_SLA_DBG_MONITOR, 0, 4, &str[0] );
/*
{
u8 str[4];
if( ( system_status.pwr_state == ON ) || ( system_status.pwr_state == SLEEP ) )
{
str[3] = vreg_ctr[ VREG_C_FREE0 ];
str[2] = vreg_ctr[ VREG_C_FREE1 ];
str[1] = vreg_ctr[ VREG_C_STATUS ];
str[0] = vreg_ctr[ VREG_C_RTC_SEC ];
str[3] = vreg_ctr[ VREG_C_SND_VOL ];
str[2] = vreg_ctr[ VREG_C_TUNE ];
str[1] = vreg_ctr[ VREG_C_ACC_CONFIG ];
str[0] = SEC;
iic_mcu_write( IIC_SLA_DBG_MONITOR, 0x03, 4, &str );
}
}
return;
*/
}
#if 0
/* ========================================================
タスクひな形

2
trunk/task_misc.c
View File

@ -213,7 +213,7 @@ task_status_immed do_command0( )
wait_ms( 100 );
{
u8 codec_reg_init[3] = { 0,0,0 };
iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init );
iic_mcu_write_codec( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init );
}
*/
}

12
trunk/task_sys.c
View File

@ -141,22 +141,13 @@ void tsk_sys( )
// ここまで来ると、電源投入確定 //
PM_LCD_vcom_set( ); // LCDの対向電圧値など書き込み
#ifdef _PMIC_TWL_
PM_TEG_LCD_dis( 0 );
#endif
break;
case ON_TRIG: //-------------------------------------------------------
PU5 = 0b00000010; // 1:PM_CHARGE
PU7 = 0b00011101; // 4:SW_WIFI 3:SW_PWSW 2:PM_IRQ 0:PM_EXTDC_n
#ifdef _MODEL_CTR_
# ifdef _SW_HOME_ENABLE_
PU20 = 0b00010000; // SW_HOME
# else
PU20 = 0b00000000;
# endif
#endif
IIC_ctr_Init( );
IIC_twl_Init( );
@ -268,6 +259,9 @@ void tsk_sys( )
vreg_ctr[ VREG_C_LED_TUNE ] = LED_TUNE_ILM_OFF;
system_status.force_off = 0;
vreg_ctr[ VREG_C_ACC_CONFIG ] = 0x00;
acc_hosu_set();
LED_stop( );
IIC_ctr_Stop( );
IIC_twl_Stop( );

1
trunk/user_define.h
View File

@ -254,7 +254,6 @@
#define INFO_LED_IS_FULLCOLOR_PU PU20.2
///////////////////////////////////////////////////////////
#define INT_MSK0_IIC_M_DMA 0b0001000000000000

11
trunk/vreg_ctr.c
View File

@ -53,8 +53,6 @@ extern task_status_immed tski_mcu_reset();
// マイコンリセット時に呼ばれます
void vreg_ctr_init( )
{
vreg_ctr[ VREG_C_LED_BRIGHT ] = 0xFF;
vreg_ctr[ VREG_C_VCOM_T ] = VCOM_DEFAULT_T;
vreg_ctr[ VREG_C_VCOM_B ] = VCOM_DEFAULT_B;
@ -73,11 +71,12 @@ void vreg_ctr_reset( )
#endif
vreg_ctr[ VREG_C_MCU_VER_MINOR ] = MCU_VER_MINOR;
vreg_ctr[ VREG_C_VOL_DIGITAL ] = 0x20;
vreg_ctr[ VREG_C_LED_BRIGHT ] = 0xFF;
vreg_ctr[ VREG_C_LED_POW ] = 0;
vreg_ctr[ VREG_C_LED_WIFI ] = 0;
vreg_ctr[ VREG_C_LED_CAM ] = 0;
vreg_ctr[ VREG_C_LED_TUNE ] = 0;
vreg_ctr[ VREG_C_VOL_DIGITAL ] = 0x20;
{
u8 i;
for( i = 0; i < sizeof( uni_info_LED ); i++ )
@ -297,17 +296,13 @@ void vreg_ctr_write( u8 adrs, u8 data )
break;
case ( VREG_C_VOL_OPTION ):
if(( vreg_ctr[ VREG_C_VOL_OPTION ] ^ data ) & REG_BIT_VOL_FORCE_SLIDER )
if(( vreg_ctr[ VREG_C_VOL_OPTION ] ^ data ) & ( REG_BIT_VOL_FORCE_SLIDER | REG_BIT_VOL_UPDATE_TO_SLIDER ))
{
renge_task_immed_add( tski_vol_update );
}
vreg_ctr[ VREG_C_VOL_OPTION ] = data;
break;
#define REG_BIT_VOL_FORCE_REG ( 1 << 2 )
#define REG_BIT_VOL_FORCE_SLIDER ( 1 << 1 )
// read only //
case ( VREG_C_MCU_VER_MAJOR ):
case ( VREG_C_MCU_VER_MINOR ):

1
trunk/vreg_ctr.h
View File

@ -113,6 +113,7 @@
#define REG_BIT_TWL_IRQ_VOL_CHANGE 0x40
// VOL option (0x26)
#define REG_BIT_VOL_UPDATE_TO_SLIDER ( 1 << 4 )
#define REG_BIT_VOL_FORCE_REG ( 1 << 2 )
#define REG_BIT_VOL_FORCE_SLIDER ( 1 << 1 )
#define REG_BIT_VOL_BY_SPI ( 1 << 0 )

164
trunk/yav_mcu_bsr.plg
View File

@ -1,15 +1,171 @@
C:\WINDOWS\system32\cmd.exe /c touch magic.c
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no loader.c
loader.c(96) : CC78K0R warning W0401: Conversion may lose significant digits
loader.c(97) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 2 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\loader.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no pm.c
pm.c(224) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
pm.c(436) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(536) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(537) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(624) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(663) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(701) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(785) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(793) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(948) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
pm.c(1015) : CC78K0R warning W0401: Conversion may lose significant digits
pm.c(1018) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(97) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(97) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(98) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(98) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(99) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(99) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(100) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(101) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(102) : CC78K0R warning W0401: Conversion may lose significant digits
batt_params.h(103) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 22 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\pm.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no i2c_ctr.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\i2c_ctr.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no main.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\main.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no magic.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no WDT.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\WDT.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no i2c_mcu.c
i2c_mcu.c(205) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 1 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\i2c_mcu.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no i2c_twl.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\i2c_twl.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no led.c
led.c(108) : CC78K0R warning W0745: Expected function prototype
led.c(235) : CC78K0R warning W0401: Conversion may lose significant digits
led.c(240) : CC78K0R warning W0401: Conversion may lose significant digits
led.c(302) : CC78K0R warning W0401: Conversion may lose significant digits
led.c(361) : CC78K0R warning W0401: Conversion may lose significant digits
led.c(387) : CC78K0R warning W0401: Conversion may lose significant digits
led.c(550) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 7 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\led.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no rtc.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\rtc.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no vreg_ctr.c
vreg_ctr.c(109) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(118) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(127) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(137) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(141) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(148) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(158) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_ctr.c(159) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_ctr.c(161) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_ctr.c(163) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_ctr.c(164) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_ctr.c(248) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(253) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(258) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(287) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(301) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_ctr.c(410) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
Compilation complete, 0 error(s) and 17 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\vreg_ctr.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no vreg_twl.c
vreg_twl.c(52) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
vreg_twl.c(61) : CC78K0R warning W0401: Conversion may lose significant digits
vreg_twl.c(65) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 3 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\vreg_twl.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no adc.c
adc.c(124) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(130) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
adc.c(210) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(237) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(329) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(353) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
adc.c(372) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(451) : CC78K0R warning W0745: Expected function prototype
adc.c(475) : CC78K0R warning W0401: Conversion may lose significant digits
adc.c(480) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 10 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\adc.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no renge\renge.c
renge\renge.c(149) : CC78K0R warning W0411: Illegal pointer combination
renge\renge.c(157) : CC78K0R warning W0412: Illegal pointer combination in conditional expression
Compilation complete, 0 error(s) and 2 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\renge.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no accero.c
accero.c(242) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
Compilation complete, 0 error(s) and 1 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\accero.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no self_flash.c
self_flash.c(219) : CC78K0R warning W0401: Conversion may lose significant digits
self_flash.c(259) : CC78K0R warning W0401: Conversion may lose significant digits
self_flash.c(260) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 3 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\self_flash.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no sw.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\sw.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no task_debug.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\task_debug.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no task_misc.c
task_misc.c(91) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
task_misc.c(105) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
task_misc.c(207) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
task_misc.c(301) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 4 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\task_misc.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no task_sys.c
task_sys.c(193) : CC78K0R warning W0401: Conversion may lose significant digits
task_sys.c(452) : CC78K0R warning W0401: Conversion may lose significant digits
task_sys.c(454) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
task_sys.c(184) : CC78K0R warning W0401: Conversion may lose significant digits
task_sys.c(446) : CC78K0R warning W0401: Conversion may lose significant digits
task_sys.c(448) : CC78K0R warning W0510: Pointer mismatch in function 'renge_task_immed_add'
Compilation complete, 0 error(s) and 3 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\task_sys.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no pedo_alg_thre_det2.c
pedo_alg_thre_det2.c(58) : CC78K0R warning W0745: Expected function prototype
pedo_alg_thre_det2.c(73) : CC78K0R warning W0401: Conversion may lose significant digits
pedo_alg_thre_det2.c(140) : CC78K0R warning W0401: Conversion may lose significant digits
pedo_alg_thre_det2.c(153) : CC78K0R warning W0401: Conversion may lose significant digits
Compilation complete, 0 error(s) and 4 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\pedo_alg_thre_det2.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -qvjl2w -sainter_asm -zpb -no task_status.c
Compilation complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\task_status.asm
Assembly complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel" -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -gb0FEFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0 loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel sw.rel task_debug.rel task_misc.rel task_sys.rel pedo_alg_thre_det2.rel ini_VECT.rel task_status.rel
Link complete, 0 error(s) and 0 warning(s) found.
"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex -nu -ki bsr.lmf
@ -20,4 +176,4 @@ intel-HEX to bsr bin converter
file converted!
Build Total error(s) : 0 Total warning(s) : 3
Build Total error(s) : 0 Total warning(s) : 79

138
trunk/yav_mcu_bsr.pri
View File

@ -23,7 +23,7 @@ SubClock=None
Count=0
[Main]
Geometry=-1211, 40, 1200, 882
Window=Normal
Window=Max
MDI_MAX=OFF
Button=ON
Mode=Auto
@ -78,10 +78,10 @@ Symbol Type=OFF
Language=C
Kanji=SJIS
[Source]
Geometry=86, 109, 754, 790
Geometry=25, 96, 754, 790
Window=Normal
DispStart=83
CaretPos=114,20
DispStart=247
CaretPos=283,0
Mode=Normal
DispFile=
Address1=
@ -142,27 +142,11 @@ Accumulative=ON
[Source1]
Geometry=0, 0, 754, 790
Window=Normal
DispStart=331
CaretPos=356,0
DispStart=292
CaretPos=1,0
Mode=Normal
DispFile=led.c
Accumulative=ON
[Source2]
Geometry=0, 0, 754, 790
Window=Normal
DispStart=379
CaretPos=433,0
Mode=Normal
DispFile=adc.c
Accumulative=ON
[Source3]
Geometry=25, 25, 754, 790
Window=Normal
DispStart=97
CaretPos=217,0
Mode=Normal
DispFile=pm.c
Accumulative=ON
[Assemble]
Geometry=282, 92, 968, 626
Window=Hide
@ -280,8 +264,8 @@ Window=Normal
Boundary=13762687
Mode=Proper
[Sfr]
Geometry=255, 105, 596, 915
Window=Hide
Geometry=39, -4, 596, 915
Window=Normal
Address1=
Address2=
Address3=
@ -298,8 +282,8 @@ Address13=
Address14=
Address15=
Address16=
Boundary=0, 0
Mode=Hex
Boundary=202, 89
Mode=Bin
Attribute=Show
Sort=Unsort
Pickup=OFF
@ -838,7 +822,7 @@ L529=IICWL1
L530=IICWH1
L531=SVA1
[Local Variable]
Geometry=908, 594, 353, 335
Geometry=908, 407, 353, 335
Window=Normal
Boundary=11468964
Mode=Proper
@ -898,7 +882,7 @@ Pickup=OFF
Name=Functional
Register Bank=0
RP0=1
RP1=5
RP1=1
RP2=1
RP3=1
PC=1
@ -981,72 +965,74 @@ Detail=OFF
Last Name=
Count=0
[Variable]
Geometry=854, -3, 441, 595
Geometry=835, -4, 441, 425
Window=Normal
Boundary=18088086
0=.p4.3,P,S,A,+,1
1=.P2.4,P,S,A,+,1
2=.bt_chg_ready,P,N,A,+,1
3=.temp_zone_charge_enable,P,N,A,+,1
4=.P5.1,P,S,A,+,1
5=.vreg_ctr,P,N,A,+,1
6=.P5.3,P,S,A,+,1
7=.heikinka_h,P,N,A,+,1
8=.system_status,.,N,A,+,1
9=.battery_manufacturer,P,N,A,+,1
10=.bt_comp,.,N,A,+,1
11=.raw_adc_temperature,P,N,A,+,1
12=.P1,B,S,A,+,1
13=.bt_checked,P,N,A,+,1
14=.TDR06,P,S,A,+,1
15=.LED_dim_status,P,N,A,+,1
Line=16
0=.TDR06,P,S,A,+,1
1=+LED_dim_status_sleep,.,N,A,-,1
2=.frame_sleep,P,N,A,+,1
3=.PM20,B,S,A,+,1
4=.P20,P,S,A,+,1
5=.pu20,B,S,A,+,1
6=.work_vr_vol,.,N,A,+,1
7=.vol_data_ctr_tmp,P,N,A,+,1
8=.vol_data_ctr,P,N,A,+,1
9=.last_modifyer,P,N,A,+,1
10=.sent_index,P,N,A,+,1
11=.vreg_ctr,P,N,A,+,1
12=.system_status,.,N,A,+,1
13=.battery_manufacturer,P,N,A,+,1
14=.bt_comp,.,N,A,+,1
15=.ADM,H,S,A,+,1
16=.ADCRH,P,S,A,+,1
17=.adc_data,P,N,A,+,1
18=.adc_raw_vol,P,N,A,+,1
19=.new_val,P,N,A,+,1
20=.work_vr_vol,.,N,A,+,1
21=.ADS,P,S,A,+,1
Line=22
[Quick Watch]
0=temp16,P,A,1
1=SW_pow_count,P,A,1
2=bt_checked,P,A,1
3=P1,B,A,1
4=PM1,B,A,1
5=bt_param_sent,P,A,1
6=P5.3,P,A,1
7=bt_chg_ready,P,A,1
8=temp_zone_charge_enable,P,A,1
9=heikinka_h,P,A,1
10=P2.4,P,A,1
11=P5.1,P,A,1
12=raw_adc_temperature,P,A,1
13=LED_dim_status,P,A,1
14=LED_duty_pow_blu,P,A,1
0=ADS,P,A,1
1=adc_data,P,A,1
2=work_vr_vol,P,A,1
3=vol_data_ctr_tmp,P,A,1
4=vol_data_ctr,P,A,1
5=adc_raw_vol,P,A,1
6=ADCRH,P,A,1
7=ADM0,P,A,1
8=ADM,P,A,1
9=pu20,B,A,1
10=P20,P,A,1
11=PM20,P,A,1
12=pu6,P,A,1
13=frame_sleep,P,A,1
14=LED_dim_status_sleep,P,A,1
15=TDR06,P,A,1
[Software Break]
Geometry=792, 551, 445, 260
Geometry=799, 616, 445, 260
Window=Normal
Width=150 30 200 100
Name0=Swb00002
Address0=pm.c#_BT_get_left+0x129
Address0=adc.c#_adc_filter+0x70
Window0=ASM
Status0=ON
Name1=Swb00005
Address1=pm.c#_BT_get_left+0xd0
Name1=Swb00003
Address1=adc.c#_adc_filter+0x89
Window1=ASM
Status1=ON
Name2=Swb00007
Address2=pm.c#_BT_get_left+0x10f
Name2=Swb00006
Address2=adc.c#_adc_filter+0x1f
Window2=ASM
Status2=ON
Name3=Swb00001
Address3=task_sys.c#_tsk_sys+0x222
Address3=led.c#_led_pow_sleep+0x15
Window3=ASM
Status3=ON
Name4=Swb00003
Address4=led.c#_led_pow_sleep+0x24
Status3=OFF
Name4=Swb00004
Address4=led.c#_led_pow_normal+0x7
Window4=ASM
Status4=ON
Name5=Swb00006
Address5=pm.c#_tsk_batt+0x69
Window5=ASM
Status5=ON
Count=6
Count=5
[Reset]
Debugger=ON
Symbol=OFF

16
trunk/yav_mcu_bsr.prk
View File

@ -6,14 +6,14 @@ FrameCX=1299
FrameCY=1044
OpenFile1=ProjectWindow
PrjPos=0,2,754,3,253
OpenFile2=config.h,0,294,66,1538,823,18,42,29,0
OpenFile3=main.c,0,125,195,1104,832,35,73,34,0
OpenFile4=task_sys.c,0,220,220,1464,977,0,137,31,0
OpenFile5=self_flash.c,0,176,176,1144,801,8,348,13,0
OpenFile6=task_misc.c,0,198,198,1166,823,48,91,48,0
OpenFile7=pedo_alg_thre_det2.c,0,220,220,1188,845,0,58,0,0
OpenFile8=pm.c,0,6,96,1250,853,26,208,0,0
OpenFile9=led.c,0,242,242,1210,867,0,348,0,0
OpenFile2=main.c,0,125,195,1104,832,35,73,34,0
OpenFile3=task_sys.c,0,220,220,1464,977,0,137,31,0
OpenFile4=task_misc.c,0,198,198,1166,823,48,91,48,0
OpenFile5=pedo_alg_thre_det2.c,0,220,220,1188,845,0,58,0,0
OpenFile6=led.c,0,242,242,1210,867,0,348,0,0
OpenFile7=adc.c,0,264,264,1508,1021,2,100,5,0
OpenFile8=self_flash.c,0,176,176,1144,801,0,348,0,0
OpenFile9=config.h,0,294,66,1538,823,0,37,0,0
OpenFile10=OutputWindow
OutputPos=0,36,981,694,1556
ActivePRJ=yav_mcu_bsr.prj

36
trunk/yav_mcu_bsr.sdb
View File

@ -1,7 +1,7 @@
[SdbInfo]
Ver=5
[loader.c]
T=4c3198b9
T=4c3d4c95
1=incs_loader.h
2=..\..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
3=fsl_user.h
@ -12,7 +12,7 @@ T=4c3198b9
8=reboot.h
9=magic.h
[pm.c]
T=4c3c0c4e
T=4c3cf836
1=incs.h
2=adc.h
3=led.h
@ -36,13 +36,13 @@ T=4c3c0229
7=adc.h
8=pool.h
[magic.c]
T=4c3c2c86
T=4c3d4d32
1=config.h
[WDT.c]
T=4bf0d1e1
1=incs_loader.h
[i2c_mcu.c]
T=4c2acd5a
T=4c3c5d1f
1=incs_loader.h
2=i2c_mcu.h
[i2c_twl.c]
@ -52,14 +52,14 @@ T=4c29c700
3=i2c_twl_defs.h
4=i2c_twl.h
[led.c]
T=4c3c31b3
T=4c3d4d20
1=incs.h
2=led.h
[rtc.c]
T=4c3c10bc
1=incs_loader.h
T=4c3c5fb0
1=incs.h
[vreg_ctr.c]
T=4c3afe1f
T=4c3d0fee
1=incs.h
2=vreg_ctr.h
3=rtc.h
@ -77,7 +77,7 @@ T=4c3af447
4=vreg_twl.h
5=vreg_ctr.h
[adc.c]
T=4c3b0f6d
T=4c3d4cd9
1=incs.h
2=adc.h
3=pm.h
@ -93,12 +93,12 @@ T=4c318e0f
6=user_define.h
7=bsr_system.h
[accero.c]
T=4c2aacdb
T=4c3d5398
1=config.h
2=incs.h
3=..\..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
[self_flash.c]
T=4c356ee9
T=4c3d4266
1=incs_loader.h
2=..\..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
3=fsl_user.h
@ -116,12 +116,12 @@ T=4c3ad20e
6=rtc.h
7=sw.h
[task_debug.c]
T=4c2aacdb
T=4c3d42f7
1=incs.h
2=renge\renge.h
3=pm.h
[task_misc.c]
T=4c3aede4
T=4c3c5c5b
1=incs.h
2=renge\renge.h
3=pm.h
@ -130,7 +130,7 @@ T=4c3aede4
6=i2c_mcu.h
7=led.h
[task_sys.c]
T=4c3c0229
T=4c3d1dac
1=incs.h
2=i2c_twl.h
3=i2c_ctr.h
@ -175,9 +175,9 @@ T=4c119cde
T=4c075832
1=config.h
[config.h]
T=4c3ae216
T=4c3d4d1d
[user_define.h]
T=4c2856fa
T=4c3d1d39
[bsr_system.h]
T=4c3ac965
[renge\renge.h]
@ -197,7 +197,7 @@ T=4c072cf1
[loader.h]
T=4c318e0f
[i2c_mcu.h]
T=4c2aacdb
T=4c3c5d1f
[WDT.h]
T=4c319dfc
[fsl_user.h]
@ -243,7 +243,7 @@ T=4c36b4fc
[i2c_twl_defs.h]
T=4bf0d1e1
[renge\renge_task_intval.h]
T=4c072cf1
T=4c3d4113
1=renge\renge_defs.h
[i2c_twl.h]
T=4bf4e29e