・ウォッチドッグタイマ有効。→割り込みに追加

・RESET1時にCODECのレジスタクリア


git-svn-id: file:///Volumes/Transfer/gigaleak_20231201/2020-05-23%20-%20ctr.7z%20+%20svn_v1.068.zip/ctr/svn/ctr_mcu@93 013db118-44a6-b54f-8bf7-843cb86687b1

trunk/loader.c

@@ -69,12 +69,17 @@ void main(  )
 {
     while( 1 )
     {
-
         WDT_Restart(  );
         if( RTCEN )
         {
            system_status.reboot = 1;
         }
+        else if( ( RESF & 0x10 ) != 0)   // WDRF 
+        {
+           system_status.reboot = 1;
+           vreg_ctr[ VREG_C_MCU_STATUS ] |= REG_BIT_WDT_RESET;
+           hdwinit2(  );
+        }
         else
         {
             u8      pwup_delay0 = 0;
@@ -175,16 +180,33 @@ void hdwinit( void )
 void hdwinit2(  )
 {
     // ポート設定
+    if( system_status.reboot )  // リセットピンだけはすぐにセットする
+    {
+#ifdef _MODEL_TS0_
+        P3 = 0b00000111;           // 簡易I2Cは出力ラッチを1にする
+        P14 = 0b00000000;
+#else
+        P3 = 0b00000110;           // 簡易I2Cは出力ラッチを1にする
+        P14 = 0b00000001;
+#endif
+    }
+    else
+    {
+        P3 = 0b00000110;           // 簡易I2Cは出力ラッチを1にする
+        P14 = 0b00000000;
+    }
+    
+    PM3 = 0b11110000;          // P31,32は簡易I2C
+    PM14 = 0b11111100;         // debugger[1] とりあえず出力
+
     P0 = 0b00000000;
     P1 = 0b00000000;
     P2 = 0b00000000;
-    P3 = 0b00000110;           // 簡易I2Cは出力ラッチを1にする
     P4 = 0b00000000;
     P5 = 0b00000000;
     P6 = 0b00000000;
     P7 = 0b01000000;
     P12 = 0b00000000;
-    P14 = 0b00000000;
 
 #ifdef _MCU_BSR_
     P20 = 0b00000000;
@@ -213,7 +235,7 @@ void hdwinit2(  )
 #endif
 
 #ifdef _MCU_BSR_
-    PM0 = 0b11111101;          // BSRマイコンでは、reset1は監視のみになる。
+    PM0 = 0b11111111;          // BSRマイコンでは、reset1は監視のみになる。
 #else
     PM0 = 0b00000000;          // 0で出力
 #endif
@@ -224,7 +246,6 @@ void hdwinit2(  )
 #else
     PM2 = 0b11101111;
 #endif
-    PM3 = 0b11110000;          // P31,32は簡易I2C
 
 #ifdef _PMIC_CTR_
     PM4 = 0b11110111;
@@ -236,7 +257,6 @@ void hdwinit2(  )
     PM6 = 0b11111100;          // I2CのラインがL出力になってしまうが、システムがOFFなのでかまわない
     PM7 = 0b00011111;
     PM12 = 0b11111111;         // 32kHzクロックのピン設定はどっちでもよい
-    PM14 = 0b11111100;         // debugger[1] とりあえず出力
     PM15 = 0b11111111;
 
 #ifdef _MCU_BSR_

trunk/main.c

@@ -40,8 +40,7 @@ void main_loop( void )
     iic_mcu_start(  );
     PM_init();
 
-    system_status.pwr_state = OFF_TRIG;
+    if( system_status.reboot )
-    if( system_status.reboot == 1 )
     {
         // システムの電源が入りっぱなしだったら、
         // マイコンだけが再起動したのだ
@@ -59,6 +58,7 @@ void main_loop( void )
     else
     {
         // リブート時は実行されない
+        system_status.pwr_state = OFF_TRIG;
     }
 
 #ifdef _PARRADIUM_

trunk/pm.c

@@ -500,16 +500,22 @@ err PM_sys_pow_on(  )
     {
         return ( ERR_ERR );
     }
-    PM_reset_neg(  );
+    PM_reset_neg();
     RESET2_neg;
     FCRAM_RST_neg;
 
+    wait_ms( 100 );
+    {  // CODEC 不定レジスタ初期化
+        u8 codec_reg_init[3] = { 0,0,0 };
+        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init ); 
+    }
+
 #else
     // TWL PMIC
     u8      temp;
 
     // “dŒ¹“Š“ü
-    RESET1_ast;
+    PM_reset_ast();
     RESET2_ast;
     FCRAM_RST_ast;
 
@@ -526,18 +532,22 @@ err PM_sys_pow_on(  )
     }
     vreg_ctr[VREG_C_BT_REMAIN] = temp;
 
-    RESET1_neg;
+    PM_reset_neg();
     RESET2_neg;
     FCRAM_RST_neg;
     wait_ms( 100 );
     if( !RESET1_n )
     {
         // ‹N“®Ž¸”s
-        RESET1_ast;
+        PM_reset_ast();
         RESET2_ast;
         FCRAM_RST_ast;
         return ( ERR_ERR );
     }
+    {  // CODEC 不定レジスタ初期化
+        u8 codec_reg_init[3] = { 0,0,0 };
+        iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init ); 
+    }
 
 #endif
 
@@ -571,7 +581,7 @@ err PM_sys_pow_off(  )
 
     if( RESET1_n )
     {
-        RESET1_ast;
+        PM_reset_ast();
         RESET2_ast;
         FCRAM_RST_ast;
         PM_TEG_PWSW = 1;
@@ -580,7 +590,7 @@ err PM_sys_pow_off(  )
         wait_ms( 250 );
         PM_TEG_PWSW = 0;
     }
-    RESET1_ast;
+    PM_reset_ast();
     RESET2_ast;
     FCRAM_RST_ast;
 

trunk/pm.h

@@ -145,7 +145,7 @@ task_status_immed tski_PM_BL_set();
 
 // ほか //
 #ifdef _PMIC_TWL_
-#define PM_reset_neg() { PM0.0 = 1; PU0.0 = 1; }
+#define PM_reset_neg() { PM0.0 = 1; }
 #define PM_reset_ast() { P0.0  = 0; PM0.0 = 0; }
 #define PM_chk_LDSW()  ( 1 )
 #else

trunk/rtc.c

@@ -41,8 +41,7 @@ void RTC_init( void )
 
         ALARMWW = 0x7F;
 
-        vreg_ctr[VREG_C_MCU_STATUS] = REG_BIT_RTC_BLACKOUT;
+        vreg_ctr[VREG_C_MCU_STATUS] |= REG_BIT_RTC_BLACKOUT;
-
     }
     // 割り込み設定
     RTCIF = 0;

trunk/self_flash.c

@@ -212,7 +212,7 @@ err firm_update(  )
   　■ファームをバックアップ領域からリストアします。
   　チェック後、最後の最後でブートスワップするので、
 　ここではブートスワップは不要です。
-  
+
  ======================================================== */
 err firm_restore(  )
 {

trunk/task_misc.c

@@ -147,7 +147,14 @@ task_status_immed do_command0(  )
             wait_ms( 5 );
             FCRAM_RST_neg;
             RESET2_neg;
-            PM_reset_neg(  );
+            PM_reset_neg();
+
+             // CODEC 不定レジスタ初期化
+            wait_ms( 100 );
+            {
+                u8 codec_reg_init[3] = { 0,0,0 };
+                iic_mcu_write( IIC_SLA_CODEC, CODEC_REG_PM, 3, codec_reg_init ); 
+            }
         }
     }
 

trunk/user_define.h

@@ -66,10 +66,14 @@
 
 // <20>«Œë‘ã“ü–hŽ~
 #define RESET1_n             ( P0.0 )
+
+#if 0 // PM_RESET1～を使う
 #define RESET1_ast           { P0.0 = 0; PM0.0 = 0; }
 #define RESET1_neg           { PM0.0 = 1; }
-#define RESET2_ast           { P0.1 = 0; }
+#endif
-#define RESET2_neg           { P0.1 = 1; }
+
+#define RESET2_ast           { P0.1 = 0; PM0.1 = 0; }
+#define RESET2_neg           { PM0.1 = 1; }
 
 #ifndef _PARRADIUM_
 #define SLP_REQ              P12.0

trunk/vreg_ctr.c

@@ -69,7 +69,7 @@ void vreg_ctr_write( u8 adrs, u8 data )
 
     case ( VREG_C_MCU_STATUS ):
         vreg_ctr[adrs] = data;
-        vreg_twl[ REG_TWL_INT_ADRS_MODE ] = ( ( data & 0xC0 ) >> 6);
+        vreg_twl[ REG_TWL_INT_ADRS_MODE ] = ( ( data & 0xC0 ) >> 6 );
         break;
 
     case ( VREG_C_VCOM_T ):

trunk/vreg_ctr.h

@@ -4,11 +4,14 @@
 
 #include "config.h"
 
-#define REG_BIT_RTC_BLACKOUT        0b00000001
 #define REG_BIT__SYS_MODE0          0b01000000
 #define REG_BIT_MCU_FIRMBROKEN      0b10000000
 
 
+// VREG_C_MCU_STATUS
+#define REG_BIT_WDT_RESET           ( 1 << 1 )
+#define REG_BIT_RTC_BLACKOUT        ( 1 << 0 )
+
 
 //  VREG_C_STATUS,
 #define REG_BIT_LCD_POW             ( 1 << 7 )

trunk/yav_mcu_bsr.plg

@@ -1,13 +1,14 @@
 C:\WINDOWS\system32\cmd.exe /c touch magic.c
-"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no main.c
+"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no loader.c
-Compilation complete,    0 error(s) and    0 warning(s) found.
+loader.c(111) : CC78K0R warning W0401: Conversion may lose significant digits
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\main.asm
+Compilation complete,    0 error(s) and    1 warning(s) found.
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\loader.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\bin\cc78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -irenge -i"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r" -ms -quvjl3wt -sainter_asm -zp -no magic.c
 Compilation complete,    0 error(s) and    0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\ra78k0r.exe" -c9F0104 -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff inter_asm\magic.asm
 Assembly complete,     0 error(s) and     0 warning(s) found.
-"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb6EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel reboot.rel sw.rel task_debug.rel task_misc.rel task_sys.rel 
+"C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\lk78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -obsr.lmf "..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r\s0rm.rel"  -go85h,0FC00h,1024 -gi0FFFFFFFFFFFFFFFFFFFFh -pbsr_k0r.map -nkd -kp -gb7EFBFFh -b"C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib" -bcl0rdm.lib -bcl0rm.lib -bcl0rmf.lib -i"C:\Program Files\NEC Electronics Tools\CC78K0R\W2.10\lib78k0r" -dbsr_mcu.dr -s -w0  loader.rel pm.rel i2c_ctr.rel main.rel magic.rel WDT.rel i2c_mcu.rel i2c_twl.rel ini_VECT.rel led.rel rtc.rel vreg_ctr.rel vreg_twl.rel adc.rel renge.rel accero.rel self_flash.rel reboot.rel sw.rel task_debug.rel task_misc.rel task_sys.rel 
 Link complete,     0 error(s) and     0 warning(s) found.
 "C:\Program Files\NEC Electronics Tools\RA78K0R\W1.31\bin\oc78k0r.exe" -y"C:\Program Files\NEC Electronics Tools\DEV" -_msgoff -o.\bsr.hex -nu -ki  bsr.lmf
 Object Conversion Complete,      0 error(s) and     0 warning(s) found.
@@ -17,4 +18,4 @@ intel-HEX to bsr bin converter
  file converted!
 
 
-Build Total error(s) : 0  Total warning(s) : 0 
+Build Total error(s) : 0  Total warning(s) : 1 

trunk/yav_mcu_bsr.pri

@@ -80,8 +80,8 @@ Kanji=SJIS
 [Source]
 Geometry=155, 80, 1012, 920
 Window=Normal
-DispStart=46
+DispStart=68
-CaretPos=96,0
+CaretPos=69,0
 Mode=Normal
 DispFile=
 Address1=
@@ -142,8 +142,8 @@ Accumulative=ON
 [Assemble]
 Geometry=605, 2, 600, 400
 Window=Normal
-DispStart=655
+DispStart=1262
-CaretPos=655,27
+CaretPos=1262,27
 Address1=
 Address2=
 Address3=
@@ -251,7 +251,7 @@ Destination=0
 [I/O Port]
 Line=0
 [Stack]
-Geometry=1128, 373, 400, 300
+Geometry=1102, 382, 400, 300
 Window=Normal
 Boundary=13762687
 Mode=Proper
@@ -855,14 +855,14 @@ Detail=OFF
 Last Name=
 Count=0
 [Variable]
-Geometry=1225, 6, 354, 910
+Geometry=1232, 6, 354, 910
 Window=Normal
 Boundary=13762700
 0=.iic_mcu_busy,P,N,A,+,1
 1=.tx_buf,P,N,A,+,1
 2=.new_task,P,N,A,+,1
 3=.if2h,P,S,A,+,1
-4=.pool,P,N,A,+,1
+4=+pool,P,N,A,-,1
 5=.new_task,P,N,A,+,1
 6=.vreg_ctr,P,N,A,+,1
 7=.cmd_BL,P,N,A,+,1

trunk/yav_mcu_bsr.prj

@@ -138,257 +138,6 @@ Source19=sw.c
 Source20=task_debug.c
 Source21=task_misc.c
 Source22=task_sys.c
-[Options.LK78K0R 0]
-Version=100
-O0=bsr_k0r.lmf
-O1=bsr.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=1
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 1]
-Version=100
-O0=a.lmf
-G=0
-E=0
-E0=a.elk
-GO=0
-GOValue=
-GOStart=FC00
-GOSizeValue=1024
-GI=0
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=1
-MemInfoCheck=0
-P=1
-P0=a.map
-MI=0
-GB=0
-GBValue=
-KM=1
-KD=1
-KP=0
-KL=0
-LF=0
-LL=0
-S=0
-W=1
-SELFCheck=0
-SELF=0
-ZB=
-CommandFile=0
-[Options.LK78K0R 2]
-Version=100
-O0=bsr.lmf
-O1=bsr_k0r.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-OFILE=C:\78k_data\yav-mcu-basara\bsr.lmf
-[Options.LK78K0R 3]
-Version=100
-O0=bsr_bsr.lmf
-O1=bsr_k0r.lmf
-O2=bsr.lmf
-O3=flash.lmf
-O4=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_bsr.map
-P1=bsr_k0r.map
-P2=bsr.map
-P3=flash.map
-P4=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=2
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 4]
-Version=100
-O0=bsr_k0r.lmf
-O1=bsr.lmf
-O2=flash.lmf
-O3=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_k0r.map
-P1=bsr.map
-P2=flash.map
-P3=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=0
-SELFCheck=1
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
-[Options.LK78K0R 5]
-Version=100
-O0=bsr_bsr.lmf
-O1=bsr_k0r.lmf
-O2=bsr.lmf
-O3=flash.lmf
-O4=a.lmf
-G=1
-E=0
-E0=flash.elk
-E1=a.elk
-GO=1
-GOValue=85
-GOStart=FC00
-GOSizeValue=1024
-GI=1
-GIValue=FFFFFFFFFFFFFFFFFFFF
-CCZA=0
-MemInfoCheck=1
-P=1
-P0=bsr_bsr.map
-P1=bsr_k0r.map
-P2=bsr.map
-P3=flash.map
-P4=a.map
-MI=0
-GB=1
-GBValue=6EFBFF
-KM=1
-KD=0
-KP=1
-KL=0
-LF=0
-LL=0
-B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
-D0=bsr_mcu.dr
-D1=user_area.dr
-S=1
-W=2
-SELFCheck=0
-SELF=0
-ZB=
-Etcetera0=
-Etcetera1=boot.lmf
-CommandFile=0
 [Options.RA78K0R 0]
 Version=100
 G=1
@@ -963,6 +712,293 @@ VfiFileBoot0=
 VfiFileBoot1=boot.vfi
 VF78K0Rchk=0
 VF78K0Rvs=
+[IncFile]
+Include1=incs_loader.h
+Include2=jhl_defs.h
+Include3=user_define.h
+Include4=config.h
+Include5=bsr_system.h
+Include6=renge\renge.h
+Include7=renge\renge_defs.h
+Include8=renge\renge_task_immediate.h
+Include9=vreg_ctr.h
+Include10=loader.h
+Include11=i2c_mcu.h
+Include12=WDT.h
+Include13=fsl.h
+Include14=fsl_user.h
+Include15=i2c_ctr.h
+Include16=pm.h
+Include17=rtc.h
+Include18=adc.h
+Include19=led.h
+Include20=incs.h
+Include21=vreg_twl.h
+Include22=accero.h
+Include23=i2c_twl_defs.h
+Include24=renge\renge_task_intval.h
+Include25=i2c_twl.h
+Include26=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
+Include27=reboot.h
+Include28=sw.h
+Include29=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
+Include30=batt_params.h
+[ToolSet]
+ToolSetName=(•Ï<E280A2>X)78K0R Software Package V1.10
+Tool1=CC78K0R|W2.10
+Tool2=RA78K0R|W1.31
+Tool3=ID78K0R-QB|V3.60
+[Options.LK78K0R 0]
+Version=100
+O0=bsr_k0r.lmf
+O1=bsr.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=1
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 1]
+Version=100
+O0=a.lmf
+G=0
+E=0
+E0=a.elk
+GO=0
+GOValue=
+GOStart=FC00
+GOSizeValue=1024
+GI=0
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=1
+MemInfoCheck=0
+P=1
+P0=a.map
+MI=0
+GB=0
+GBValue=
+KM=1
+KD=1
+KP=0
+KL=0
+LF=0
+LL=0
+S=0
+W=1
+SELFCheck=0
+SELF=0
+ZB=
+CommandFile=0
+[Options.LK78K0R 2]
+Version=100
+O0=bsr.lmf
+O1=bsr_k0r.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=7EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+OFILE=C:\78k_data\yav-mcu-basara\bsr.lmf
+[Options.LK78K0R 3]
+Version=100
+O0=bsr_bsr.lmf
+O1=bsr_k0r.lmf
+O2=bsr.lmf
+O3=flash.lmf
+O4=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_bsr.map
+P1=bsr_k0r.map
+P2=bsr.map
+P3=flash.map
+P4=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=2
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 4]
+Version=100
+O0=bsr_k0r.lmf
+O1=bsr.lmf
+O2=flash.lmf
+O3=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_k0r.map
+P1=bsr.map
+P2=flash.map
+P3=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=0
+SELFCheck=1
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
+[Options.LK78K0R 5]
+Version=100
+O0=bsr_bsr.lmf
+O1=bsr_k0r.lmf
+O2=bsr.lmf
+O3=flash.lmf
+O4=a.lmf
+G=1
+E=0
+E0=flash.elk
+E1=a.elk
+GO=1
+GOValue=85
+GOStart=FC00
+GOSizeValue=1024
+GI=1
+GIValue=FFFFFFFFFFFFFFFFFFFF
+CCZA=0
+MemInfoCheck=1
+P=1
+P0=bsr_bsr.map
+P1=bsr_k0r.map
+P2=bsr.map
+P3=flash.map
+P4=a.map
+MI=0
+GB=1
+GBValue=6EFBFF
+KM=1
+KD=0
+KP=1
+KL=0
+LF=0
+LL=0
+B0=C:\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\lib78k0r\fsl.lib
+D0=bsr_mcu.dr
+D1=user_area.dr
+S=1
+W=2
+SELFCheck=0
+SELF=0
+ZB=
+Etcetera0=
+Etcetera1=boot.lmf
+CommandFile=0
 [Options.LCNV78K0R 0]
 Version=100
 LCNV_GO=0
@@ -1004,39 +1040,3 @@ DefaultMode2=1
 DefaultMode3=1
 DefaultMode4=1
 DefaultMode5=1
-[IncFile]
-Include1=incs_loader.h
-Include2=jhl_defs.h
-Include3=user_define.h
-Include4=config.h
-Include5=bsr_system.h
-Include6=renge\renge.h
-Include7=renge\renge_defs.h
-Include8=renge\renge_task_immediate.h
-Include9=vreg_ctr.h
-Include10=loader.h
-Include11=i2c_mcu.h
-Include12=WDT.h
-Include13=fsl.h
-Include14=fsl_user.h
-Include15=i2c_ctr.h
-Include16=pm.h
-Include17=rtc.h
-Include18=adc.h
-Include19=led.h
-Include20=incs.h
-Include21=vreg_twl.h
-Include22=accero.h
-Include23=i2c_twl_defs.h
-Include24=renge\renge_task_intval.h
-Include25=i2c_twl.h
-Include26=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
-Include27=reboot.h
-Include28=sw.h
-Include29=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
-Include30=batt_params.h
-[ToolSet]
-ToolSetName=(•Ï<E280A2>X)78K0R Software Package V1.10
-Tool1=CC78K0R|W2.10
-Tool2=RA78K0R|W1.31
-Tool3=ID78K0R-QB|V3.60

trunk/yav_mcu_bsr.prk

@@ -1,17 +1,15 @@
 [ProjectManager]
 FrameMax=0
-FrameX=138
+FrameX=64
-FrameY=118
+FrameY=122
 FrameCX=1299
 FrameCY=1044
-OpenFile1=task_sys.c,0,521,328,1765,1085,25,250,25,0
+OpenFile1=renge\renge.h,0,502,637,1746,1394,29,16,29,0
-OpenFile2=renge\renge.h,0,502,637,1746,1394,29,16,29,0
+OpenFile2=ProjectWindow
-OpenFile3=i2c_twl.c,0,31,261,1010,897,0,1,0,0
-OpenFile4=config.h,0,255,3,1234,639,0,21,20,0
-OpenFile5=OutputWindow
-OutputPos=0,421,829,388,1497
-OpenFile6=ProjectWindow
 PrjPos=0,2,754,3,253
+OpenFile3=config.h,0,22,22,1001,659,21,21,29,0
+OpenFile4=OutputWindow
+OutputPos=0,421,829,388,1497
 ActivePRJ=yav_mcu_bsr.prj
 [ProjectWindow]
 ProjectWindowDispType=0

trunk/yav_mcu_bsr.sdb

@@ -1,7 +1,7 @@
 [SdbInfo]
 Ver=5
 [loader.c]
-T=4b445f00
+T=4b67cfc9
 1=incs_loader.h
 2=fsl.h
 3=fsl_user.h
@@ -23,7 +23,7 @@ T=4b60e64a
 1=incs.h
 2=accero.h
 [main.c]
-T=4b66ac04
+T=4b677175
 1=incs_loader.h
 2=WDT.h
 3=rtc.h
@@ -32,7 +32,7 @@ T=4b66ac04
 6=led.h
 7=adc.h
 [magic.c]
-T=4b66b228
+T=4b67eda0
 1=config.h
 [WDT.c]
 T=4afd21ca
@@ -92,7 +92,7 @@ T=4b66b29e
 1=incs.h
 2=..\..\Program Files\NEC Electronics Tools\CC78K0R\W2.10\inc78k0r\math.h
 [self_flash.c]
-T=4b4d743c
+T=4b67e6e0
 1=incs_loader.h
 2=..\..\Program Files\NEC Electronics Tools\FSL78K0R_Type02ES\V1.20\inc78k0r\fsl.h
 3=fsl_user.h
@@ -148,7 +148,7 @@ T=4b023fdb
 [user_define.h]
 T=4b66880a
 [config.h]
-T=4b66a4e1
+T=4b67f2af
 [bsr_system.h]
 T=4b3064de
 [renge\renge.h]