and update test cases accordingly.
This doesn't affect the output dumped using llvm-dwarfdump, but
readelf does now dump the debug_loc section.
llvm-svn: 194898
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
llvm-svn: 193779
To support ref_addr, we calculate the section offset of a DIE (i.e. offset
of a DIE from beginning of the debug info section). The Offset field in DIE
is currently CU-relative. To calculate the section offset, we add a
DebugInfoOffset field in CompileUnit to store the offset of a CU from beginning
of the debug info section. We set the value in DwarfUnits::computeSizeAndOffset
for each CompileUnit.
A helper function DIE::getCompileUnit is added to return the CU DIE that
the input DIE belongs to. We also add a map CUDieMap in DwarfDebug to help
finding the CU for a given CU DIE.
For a cross-referenced DIE, we first find the CU DIE it belongs to with
getCompileUnit, then we use CUDieMap to get the corresponding CU for the CU DIE.
Adding the section offset of the CU with the CU-relative offset of a DIE gives
us the seciton offset of the DIE.
We correctly emit ref_addr with relocation using EmitLabelPlusOffset when
doesDwarfUseRelocationsAcrossSections is true.
This commit handles the emission of DW_FORM_ref_addr when we have an attribute
with FORM_ref_addr. A follow-on patch will start using ref_addr when adding a
DIEEntry. This commit will be tested and verified in the follow-on patch.
Reviewed off-list by Eric, Thanks.
llvm-svn: 193658
after the DIE creation, we construct the context first.
Ensure that we create the context before we create a type so that we can add
the newly created type to the parent. Remove last use of addToContextOwner
now that it's not needed.
We use createAndAddDIE to wrap around "new DIE(". Now all shareable DIEs
should be added to their parents right after the creation.
Reviewed off-list by Eric, Thanks.
llvm-svn: 193657
after the DIE creation, we construct the context first.
This touches creation of namespaces and global variables. The purpose is to
handle all DIE creations similarly: constructs the context first, then creates
the DIE and immediately adds the DIE to its parent.
We use createAndAddDIE to wrap around "new DIE(".
llvm-svn: 193589
More patches will be submitted to convert "new DIE(" to use createAddAndDIE in
DwarfCompileUnit.cpp. This will simplify implementation of addDIEEntry where
we have to decide between ref4 and ref_addr, because DIEs that can be shared
across CU will be added to a CU already.
Reviewed off-list by Eric.
llvm-svn: 193567
It wraps around "new DIE(" and handles the bookkeeping part of the newly-created
DIE. It adds the DIE to its parent, and calls insertDIE if necessary. It makes
sure that bookkeeping is done at the earliest time and we should not see
parentless DIEs if all constructions of DIEs go through this helper function.
Later on, we can use an allocator for DIE allocation, and will only need to
change createAndAddDIE instead of modifying all the "new DIE(".
Reviewed off-list by Eric.
llvm-svn: 193566
Since we never insert DIE for DITemplateTypeParameter to a map, there is no need
to call getDIE in getOrCreateTemplateTypeParameterDIE. It is also renamed to
constructTemplateTypeParameterDIE to match with other construct functions
in CompileUnit.
Same applies to getOrCreateTemplateValueParameterDIE.
llvm-svn: 193287
Remove the unneeded return values from createMemberDIE, constructEnumTypeDIE,
getOrCreateTemplateTypeParameterDIE, and getOrCreateTemplateValueParameterDIE.
llvm-svn: 193285
This allows various variables to be more self-documenting and easier to
debug by being of specific types without overlapping enum values.
Precommit review by Eric Christopher.
llvm-svn: 193091
With this commit, all DIEs created in CompileUnit will be added to parents
inside the same function. Also make getOrCreateTemplateType|Value functions
private.
No functionality change.
llvm-svn: 193002
like C++ should be the fully qualified names for the type.
Add a routine that does a language specific context walk to build
up the qualified name and use it when we add types/names to the
tables. Expand the gnu pubnames testcase as it's the most complex
to make sure that qualified types are also being added.
llvm-svn: 192865
1) Make sure we emit static member variables by checking
at the end of createGlobalVariableDIE rather than piecemeal
in the function.
(As a note, createGlobalVariableDIE needs rewriting.)
2) Make sure we use the definition rather than declaration DIE
for two things: a) determining linkage for gnu pubnames, and b)
as the address of the DIE for global variables.
(As a note, createGlobalVariableDIE really needs rewriting.)
Adjust the testcase to make sure we're checking the correct DIEs.
llvm-svn: 192761
Clean up creation of static member DIEs. We can create static member DIEs from
two places, so we call getOrCreateStaticMemberDIE from the two places.
getOrCreateStaticMemberDIE will get or create the context DIE first, then it
will check if the DIE already exists, if not, we create the static member DIE
and add it to the context.
Creation of static member DIEs are handled in a similar way as subprogram DIEs.
llvm-svn: 192618
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
llvm-svn: 192018
In the case (shown in the attached test) where a member function
definition was emitted into debug info the following could occur:
1) build the debug info for the member function definition
2) in (1), build the debug info for the member function declaration
3) construct and add the member function declaration DIE
4) add it to its context
5) build its context (the type it is a member of)
6) construct the members and add them to the type
7) except don't add member functions because "getOrCreateSubprogram"
adds the function to its parent anyway
8) except we're only partway through building this subprogram
declaration so it hasn't been added yet - but we returned the partially
constructed DIE (since it's already in the MDNode->DIE mapping to avoid
infinitely recursing trying to create the member function DIE)
9) once the type is constructed, add the member function to it
10) now the members are out of order (the member function being defined
is listed as the last member, even though it was declared as the first)
To avoid this, construct the context of the subprogram DIE before we
query to see if it exists. That way we never end up creating it before
creating its context and ending up in this situation.
Alternatively, the type construction that visits/builds all the members
could call something like getOrCreateSubprogram, but that doesn't ever
do the "add to context" step. Then the type building code would always
be responsible for adding members (and the subprogram "addToContextDIE"
would no-op because the context building would have added the subprogram
declaration to the type/context DIE already).
(the test cases updated were overly-sensitive to offsets or abbreviation
numbers. We don't have a nice way to make these tests more robust as yet
- multiline FileCheck matches would be required)
llvm-svn: 191939
DIE::addChild had a shortcircuit that silently no-op'd when a child was
readded to the same parent. This hid some quirky/redundant code in
DwarfDebug/CompileUnit. By removing that functionality and replacing it
with an assert I was able to find and cleanup those cases, mostly
centering around adding members to types in various circumstances.
1) The original oddity I noticed while working on type units (which
actually was helping me in the short term, by accident) was the
addToContextOwner call in constructTypeDIE. This call was completely
bogus (why was it only done for non-virtual types? what relevance does
that have at all) and redundant with the more uniform addToContextOwner
made in getOrCreateTypeDIE.
2) If a member function definition was visited (createSubprogramDIE), it
would attempt to build the member function declaration. The declaration
DIE would then be added to its context, but in building the context (the
type for which this function is a member) the members of the type would
be added to the type automatically, so by the time the context was
constructed, the member function was already associated with it.
3) The same as (2) but without the member function being constructed
first. Whenever a type was constructed, the members would be created and
member functions would be created by getOrCreateSubprogramDIE - this
would lead to the subprogram being added to the (incomplete) type
already, then the general member-construction code would add it again.
llvm-svn: 191928
r191052 added emitting .debug_aranges to Clang, but this
functionality is broken: it uses all MC labels added in DWARF Asm
printer, including the labels for build relocations between
different DWARF sections, like .Lsection_line or .Ldebug_loc0.
As a result, if any DIE .debug_info would contain "DW_AT_location=0x123"
attribute, .debug_aranges would also contain a range starting from 0x123,
breaking tools that rely on this section.
This patch fixes this by using only MC labels that corresponds to the
addresses in the user program.
llvm-svn: 191884
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
llvm-svn: 191800
and it is shared across CUs.
We add a few maps in DwarfDebug to map MDNodes for the type system to the
corresponding DIEs: MDTypeNodeToDieMap, MDSPNodeToDieMap, and
MDStaticMemberNodeToDieMap. These DIEs can be shared across CUs, that is why we
keep the maps in DwarfDebug instead of CompileUnit.
Sometimes, when we try to add an attribute to a DIE, the DIE is not yet added
to its owner yet, so we don't know whether we should use ref_addr or ref4.
We create a worklist that will be processed during finalization to add
attributes with the correct form (ref_addr or ref4).
We add addDIEEntry to DwarfDebug to be a wrapper around DIE->addValue. It checks
whether we know the correct form, if not, we update the worklist
(DIEEntryWorklist).
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
llvm-svn: 191792
This partially reverts r190330. DIScope::getContext now returns DIScopeRef
instead of DIScope. We construct a DIScopeRef from DIScope when we are
dealing with subprogram, lexical block or name space.
llvm-svn: 190362
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
We are now able to unique a simple class as demonstrated by the added
testing case.
llvm-svn: 190334
DIScope::getContext is a wrapper function that calls the specific getContext
method on each subclass. When we switch DIType::getContext to return DIScopeRef
instead of DIScope, DIScope::getContext can no longer return a DIScope without
a type identifier map.
DIScope::getContext is only used by DwarfDebug, so we move it to DwarfDebug
to have easy access to the type identifier map.
llvm-svn: 190330
This helper function needs the type identifier map when we switch
DIType::getContext to return DIScopeRef instead of DIScope.
Since isSubprogramContext is used by DwarfDebug only, We move it to DwarfDebug
to have easy access to the map.
llvm-svn: 190325
ptr_to_member.
We introduce a new class DITypeRef that represents a reference to a DIType.
It wraps around a Value*, which can be either an identifier in MDString
or an actual MDNode. The class has a helper function "resolve" that
finds the actual MDNode for a given DITypeRef.
We specialize getFieldAs to return a field that is a reference to a
DIType. To correctly access the base type field of ptr_to_member,
getClassType now calls getFieldAs<DITypeRef> to return a DITypeRef.
Also add a typedef for DITypeIdentifierMap and a helper
generateDITypeIdentifierMap in DebugInfo.h. In DwarfDebug.cpp, we keep
a DITypeIdentifierMap and call generateDITypeIdentifierMap to actually
populate the map.
Verifier is updated accordingly.
llvm-svn: 190081
This reverts commit r189913.
Talked with Eric on IRC. I am going to XFAIL the failing test since it
is using what Eric described as "the member hack" which was needed on
that old GDB.
Sorry for the noise!
llvm-svn: 189914
when we can. Migrate from using blocks when we're adding just a
single attribute and floating point values are an unsigned, not signed,
bag of bits.
Update all test cases accordingly.
llvm-svn: 189419
We check this in many/all other cases, just missed this one it seems.
Perhaps it'd be worth unifying this so we never emit zero-length
DW_AT_names.
llvm-svn: 188649
the type exists.
Fix up cases where we weren't checking for optional types and add
an assert to addType to make sure we catch this in the future.
Fix up a testcase that was using the tag for DW_TAG_array_type
when it meant DW_TAG_enumeration_type.
llvm-svn: 187963
type units.
Initially this support is used in the computation of an ODR checker
for C++. For now we're attaching it to the DIE, but in the future
it will be attached to the type unit.
This also starts breaking out types into the separation for type
units, but without actually splitting the DIEs.
In preparation for hashing the DIEs this adds a DIEString type
that contains a StringRef with the string contained at the label.
llvm-svn: 187213
Change the informal convention of DBG_VALUE machine instructions so that
we can express a register-indirect address with an offset of 0.
The old convention was that a DBG_VALUE is a register-indirect value if
the offset (operand 1) is nonzero. The new convention is that a DBG_VALUE
is register-indirect if the first operand is a register and the second
operand is an immediate. For plain register values the combination reg,
reg is used. MachineInstrBuilder::BuildMI knows how to build the new
DBG_VALUES.
rdar://problem/13658587
llvm-svn: 185966
This allows getDebugThreadLocalSymbol to return a generic MCExpr
instead of just a MCSymbolRefExpr.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185460
This partially reverts r185202 and restores DIELabel to hold plain
MCSymbol references. Instead, we add a new subclass DIEExpr of
DIEValue that can hold generic MCExpr references.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185458
Based on GCC's output for TLS variables (OP_constNu, x@dtpoff,
OP_lo_user), this implements debug info support for TLS in ELF. Verified
that this output is correct/sufficient on Linux (using gold - if you're
using binutils-ld, you'll need something with the fix for
http://sourceware.org/bugzilla/show_bug.cgi?id=15685 in it).
Support on non-ELF is sort of "arbitrary" at the moment - if Apple folks
want to discuss (or just go ahead & implement) how this should work in
MachO, etc, I'm open.
llvm-svn: 185203
Fix up three tests - one that was relying on abbreviation number,
another relying on a location list in this case (& testing raw asm,
changed that to use dwarfdump on the debug_info now that that's where
the location is), and another which was added in r184368 - exposing a
bug in that fix that is exposed when we emit the location inline rather
than through a location list. Fix that bug while I'm here.
llvm-svn: 184387
Rather than using the full power of target-specific addressing modes in
DBG_VALUEs with Frame Indicies, simply use Frame Index + Offset. This
reduces the complexity of debug info handling down to two
representations of values (reg+offset and frame index+offset) rather
than three or four.
Ideally we could ensure that frame indicies had been eliminated by the
time we reached an assembly or dwarf generation, but I haven't spent the
time to figure out where the FIs are leaking through into that & whether
there's a good place to convert them. Some FI+offset=>reg+offset
conversion is done (see PrologEpilogInserter, for example) which is
necessary for some SelectionDAG assumptions about registers, I believe,
but it might be possible to make this a more thorough conversion &
ensure there are no remaining FIs no matter how instruction selection
is performed.
llvm-svn: 184066
Since the testing case uses ref_addr, which requires version 3+ to work,
we will solve the dwarf version issue first.
This patch also causes failures in one of the bots. I will update the patch
accordingly in my next attempt.
rdar://13926659
llvm-svn: 182867
from a different CU.
We used to print out an error message and fail to generate inlined_subroutine.
If we use ref_addr in the generated DWARF, the DWARF version should be 3 or
above.
rdar://13926659
llvm-svn: 182791
There were bits & pieces of code lying around that may've given the
impression that debug info metadata supported the possibility that a
subprogram's type could be specified by a non-subroutine type describing
the return type of a void function. This support was incomplete &
unnecessary. Asserts & API have been changed to make the desired usage
more clear.
llvm-svn: 182532
This is only tested for global variables at the moment (& includes tests
for the unnamed parameter case, since apparently this entire function
was completely untested previously)
llvm-svn: 181632
for constructors and destructors since the original declaration given
by the AT_specification both won't and can't.
Patch by Yacine Belkadi, I've cleaned up the testcases.
llvm-svn: 181471
belongs to a different compile unit.
DW_FORM_ref_addr should be used for cross compile-unit reference.
When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.
This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.
rdar://problem/13370501
llvm-svn: 176882
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
llvm-svn: 176838
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
llvm-svn: 176605
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
llvm-svn: 176220
definition DIE, to make old GDB happy.
We have a regression for old GDB when Clang uses DW_TAG_member to declare
static members inside a class, instead of DW_TAG_variable. This patch will fix
this regression.
rdar://problem/13291234
llvm-svn: 176143
TAG_member inside a class to the specification DIE.
Having AT_MIPS_linkage_name on TAG_member caused old gdb (GNU 6.3.50) to
error out. Also gcc 4.7 has AT_MIPS_linkage_name on the specification DIE.
rdar://problem/13291234
llvm-svn: 176120
using the DW_FORM_GNU_addr_index and a separate .debug_addr section which
stays in the executable and is fully linked.
Sneak in two other small changes:
a) Print out the debug_str_offsets.dwo section.
b) Change form we're expecting the entries in the debug_str_offsets.dwo
section to take from ULEB128 to U32.
Add tests for all of this in the fission-cu.ll test.
llvm-svn: 172578
proposal. This leaves the strings in the skeleton die as strp,
but in all dwo files they're accessed now via DW_FORM_GNU_str_index.
Add support for dumping these sections and modify the fission-cu.ll
testcase to have the correct strings and form. Fix a small bug
in the fixed form sizes routine that involved out of array accesses
for the table and add a FIXME in the extractFast routine to fix
this up.
llvm-svn: 171779
This works fine with GDB for member variable pointers, but GDB's support for
member function pointers seems to be quite unrelated to
DW_TAG_ptr_to_member_type. (see GDB bug 14998 for details)
llvm-svn: 171698
This change essentially reverts r87069 which came without a test case. It
causes no regressions in the GDB 7.5 test suite & fixes 25 xfails (commit
to the test suite to follow). If anyone can present a test case that
demonstrates why this check is necessary I'd be happy to account for it in one
way or another.
llvm-svn: 171609
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
Some languages, e.g. Ada and Pascal, allow you to specify that the array bounds
are different from the default (1 in these cases). If we have a lower bound
that's non-default, then we emit the lower bound. We also calculate the correct
upper bound in those cases.
llvm-svn: 169484
The count attribute is more accurate with regards to the size of an array. It
also obviates the upper bound attribute in the subrange. We can also better
handle an unbound array by setting the count to -1 instead of the lower bound to
1 and upper bound to 0.
llvm-svn: 169312
The count field is necessary because there isn't a difference between the 'lo'
and 'hi' attributes for a one-element array and a zero-element array. When the
count is '0', we know that this is a zero-element array. When it's >=1, then
it's a normal constant sized array. When it's -1, then the array is unbounded.
llvm-svn: 169218
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
If we have a type 'int a[1]' and a type 'int b[0]', the generated DWARF is the
same for both of them because we use the 'upper_bound' attribute. Instead use
the 'count' attrbute, which gives the correct number of elements in the array.
<rdar://problem/12566646>
llvm-svn: 167806
Add some support for dealing with an object pointer on arguments.
Part of rdar://9797999
which now supports adding the object pointer attribute to the
subprogram as it should.
llvm-svn: 163754
output (we're emitting a specification already and the information
isn't changing) and we're not in old gdb compat mode.
Saves 1% on the debug information for a build of llvm.
Fixes rdar://11043421
llvm-svn: 162493
definition in the map before calling itself to retrieve the
DIE for the declaration. Without this change, if this causes
getOrCreateSubprogramDIE to be recursively called on the definition,
it will create multiple DIEs for that definition. Fixes PR12831.
llvm-svn: 157541
out the DW_AT_name. Older gdbs unfortunately still use it to
disambiguate member functions in templated classes (gdb.cp/templates.exp).
rdar://11043421 (which is now deferred for a bit)
llvm-svn: 152782
output (we're emitting a specification already and the information
isn't changing).
Saves 1% on the debug information for a build of llvm.
Fixes rdar://11043421
llvm-svn: 152697
the debug type accelerator tables to contain the tag and a flag
stating whether or not a compound type is a complete type.
rdar://10652330
llvm-svn: 147651
Don't assume APInt::getRawData() would hold target-aware endianness nor host-compliant endianness. rawdata[0] holds most lower i64, even on big endian host.
FIXME: Add a testcase for big endian target.
FIXME: Ditto on CompileUnit::addConstantFPValue() ?
llvm-svn: 143194
Few weeks ago, llvm completely inverted the debug info graph. Earlier each debug info node used to keep track of its compile unit, now compile unit keeps track of important nodes. One impact of this change is that the global variable's do not have any context, which should be checked before deciding to use AT_specification DIE.
llvm-svn: 140282
MDNodes graph structure such that compiler unit keeps track of important MDNodes and update dwarf writer to process mdnodes top-down instead of bottom up.
llvm-svn: 137778
