The function getMinimumVF(ElemWidth) will return the minimum VF for
a vector with elements of size ElemWidth bits. This value will only
apply to targets for which TTI::shouldMaximizeVectorBandwidth returns
true. The value of 0 indicates that there is no minimum VF.
Differential Revision: https://reviews.llvm.org/D45271
llvm-svn: 330062
Summary:
Another clean up, following D43208.
Interleaved memory access analysis/optimization has nothing to do with vectorization legality. It doesn't really belong there. On the other hand, cost model certainly has to know about it.
In principle, vectorization should proceed like Legality ==> Optimization ==> CostModel ==> CodeGen, and this change just does that,
by moving the interleaved access analysis/decision out of Legal, and run it just before CostModel object is created.
After this, I can move LoopVectorizationLegality and Hints/Requirements classes into it's own header file, making it shareable within Transform tree. I have the patch already but I don't want to mix with this change. Eventual goal is to move to Analysis tree, but I first need to move RecurrenceDescriptor/InductionDescriptor from Transform/Util/LoopUtil.* to Analysis.
Reviewers: rengolin, hfinkel, mkuper, dcaballe, sguggill, fhahn, aemerson
Reviewed By: rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45072
llvm-svn: 329645
Summary:
If the load/extractelement/extractvalue instructions are not originally
consecutive, the SLP vectorizer is unable to vectorize them. Patch
allows reordering of such instructions.
Patch does not support reordering of the repeated instruction, this must
be handled in the separate patch.
Reviewers: RKSimon, spatel, hfinkel, mkuper, Ayal, ashahid
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43776
llvm-svn: 329085
The primary issue here is that using NDEBUG alone isn't enough to guard
debug printing -- instead the DEBUG() macro needs to be used so that the
specific pass debug logging check is employed. Without this, every
asserts-enabled build was printing out information when it hit this.
I also fixed another place where we had multiple statements in a DEBUG
macro to use {}s to be a bit cleaner. And I fixed a place that used
errs() rather than dbgs().
llvm-svn: 329082
The primary issue here is that using NDEBUG alone isn't enough to guard
debug printing -- instead the DEBUG() macro needs to be used so that the
specific pass debug logging check is employed. Without this, every
asserts-enabled build was printing out information when it hit this.
I also fixed another place where we had multiple statements in a DEBUG
macro to use {}s to be a bit cleaner. And I fixed a place that used
`errs()` rather than `dbgs()`.
llvm-svn: 329046
We use two approaches for determining the minimum bitwidth.
* Demanded bits
* Value tracking
If demanded bits doesn't result in a narrower type, we then try value tracking.
We need this if we want to root SLP trees with the indices of getelementptr
instructions since all the bits of the indices are demanded.
But there is a missing piece though. We need to be able to distinguish "demanded
and shrinkable" from "demanded and not shrinkable". For example, the bits of %i
in
%i = sext i32 %e1 to i64
%gep = getelementptr inbounds i64, i64* %p, i64 %i
are demanded, but we can shrink %i's type to i32 because it won't change the
result of the getelementptr. On the other hand, in
%tmp15 = sext i32 %tmp14 to i64
%tmp16 = insertvalue { i64, i64 } undef, i64 %tmp15, 0
it doesn't make sense to shrink %tmp15 and we can skip the value tracking.
Ideas are from Matthew Simpson!
Differential Revision: https://reviews.llvm.org/D44868
llvm-svn: 329035
Summary:
If the load/extractelement/extractvalue instructions are not originally
consecutive, the SLP vectorizer is unable to vectorize them. Patch
allows reordering of such instructions.
Reviewers: RKSimon, spatel, hfinkel, mkuper, Ayal, ashahid
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43776
llvm-svn: 328980
When building the SLP tree, we look for reuse among the vectorized tree
entries. However, each gather sequence is represented by a unique tree entry,
even though the sequence may be identical to another one. This means, for
example, that a gather sequence with two uses will be counted twice when
computing the cost of the tree. We should only count the cost of the definition
of a gather sequence rather than its uses. During code generation, the
redundant gather sequences are emitted, but we optimize them away with CSE. So
it looks like this problem just affects the cost model.
Differential Revision: https://reviews.llvm.org/D44742
llvm-svn: 328316
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Summary:
It turned out to be error-prone to expect the callers to handle that - better to
leave the decision to this routine and make the required data to be explicitly
passed to the function.
This handles the case that was missed in the r322473 and fixes the assert
mentioned in PR36524.
Reviewers: dorit, mssimpso, Ayal, dcaballe
Reviewed By: dcaballe
Subscribers: Ka-Ka, hiraditya, dneilson, hsaito, llvm-commits
Differential Revision: https://reviews.llvm.org/D43812
llvm-svn: 327960
Summary:
This variable is largely going unused; aside from reporting number of instructions for in DEBUG builds.
The only use of NumInstructions is in debug output to represent the LoopSize. That value can be can be misleading as it also includes metadata instructions (e.g., DBG_VALUE) which have no real impact. If we do choose to keep this around, we probably should guard it by a DEBUG macro, as it's not used in production builds.
Reviewers: majnemer, congh, rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D44495
llvm-svn: 327589
There are six separate instances of getPointerOperand() utility.
LoopVectorize.cpp has one of them,
and I don't want to create a 7th one while I'm trying to move
LoopVectorizationLegality into a separate file
(eventual objective is to move it to Analysis tree).
See http://lists.llvm.org/pipermail/llvm-dev/2018-February/120999.html
for llvm-dev discussions
Closes D43323.
Patch by Hideki Saito <hideki.saito@intel.com>.
llvm-svn: 327173
Fixes PR36311.
See more detailed analysis in
https://bugs.llvm.org/show_bug.cgi?id=36311.
isUniform() information is recomputed after LV started transforming the
underlying IR and that triggered an assert in SCEV.
From vectorizer's architectural perspective, such information, while
still useful in vector code gen, should not be recomputed after the
start of transforming the LLVM IR. Instead, we should collect and cache
such information during the analysis phase of LV and use the cached info
during code gen.
From the symptom perspective, this assert as it stands right now is not
very useful. Legality already rejected loops that would trigger the
assert. As such, commenting out the assert is NFC from vectorizer's
functionality perspective. On top of that, just above the assertion, we
check for unit-strided load/store or
gather scatter. Addresses can't be uniform below that check.
From vectorization theory point of view, we don't have to reject all
cases of stores to uniform addresses. Eventually, we should support
safe/profitable cases.
This patch resolves the issue by removing the useless assertion that is
invoking LAA's isUniform() that requires up-to-date DomTree ---- once
vector code gen starts modifying CFG, we don't have an up-to-date
DomTree.
Patch by Hideki Saito <hideki.saito@intel.com>.
llvm-svn: 327109
Summary: GCN ISA supports instructions that can read 16 consecutive dwords from memory through the scalar data cache;
loadstoreVectorizer should take advantage of the wider vector length and pack 16/8 elements of dwords/quadwords.
Author: FarhanaAleen
Reviewed By: rampitec
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D44179
llvm-svn: 326910
The LoadStoreVectorizer thought that <1 x T> and T were the same types
when merging stores, leading to a crash later.
Patch by Erik Hogeman.
Differential Revision: https://reviews.llvm.org/D44014
llvm-svn: 326884
This patch adds support for detecting outer loops with irreducible control
flow in LV. Current detection uses SCCs and only works for innermost loops.
This patch adds a utility function that works on any CFG, given its RPO
traversal and its LoopInfoBase. This function is a generalization
of isIrreducibleCFG from lib/CodeGen/ShrinkWrap.cpp. The code in
lib/CodeGen/ShrinkWrap.cpp is also updated to use the new generic utility
function.
Patch by Diego Caballero <diego.caballero@intel.com>
Differential Revision: https://reviews.llvm.org/D40874
llvm-svn: 326568
Removes verifyDomTree, using assert(verify()) everywhere instead, and
changes verify a little to always run IsSameAsFreshTree first in order
to print good output when we find errors. Also adds verifyAnalysis for
PostDomTrees, which will allow checking of PostDomTrees it the same way
we check DomTrees and MachineDomTrees.
Differential Revision: https://reviews.llvm.org/D41298
llvm-svn: 326315
All SIMD architectures can emulate masked load/store/gather/scatter
through element-wise condition check, scalar load/store, and
insert/extract. Therefore, bailing out of vectorization as legality
failure, when they return false, is incorrect. We should proceed to cost
model and determine profitability.
This patch is to address the vectorizer's architectural limitation
described above. As such, I tried to keep the cost model and
vectorize/don't-vectorize behavior nearly unchanged. Cost model tuning
should be done separately.
Please see
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120164.html for
RFC and the discussions.
Closes D43208.
Patch by: Hideki Saito <hideki.saito@intel.com>
llvm-svn: 326079
Summary:
Reversed loads are handled as gathering. But we can just reshuffle
these values. Patch adds support for vectorization of reversed loads.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43022
llvm-svn: 325134
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
Summary:
For better vectorization result we should take into consideration the
cost of the user insertelement instructions when we try to
vectorize sequences that build the whole vector. I.e. if we have the
following scalar code:
```
<Scalar code>
insertelement <ScalarCode>, ...
```
we should consider the cost of the last `insertelement ` instructions as
the cost of the scalar code.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42657
llvm-svn: 324893
Summary:
If -pass-remarks=loop-vectorize, atomic ops will be seen by
analyzeInterleaving(), even though canVectorizeMemory() == false. This
is because we are requesting extra analysis instead of bailing out.
In such a case, we end up with a Group in both Load- and StoreGroups,
and then we'll try to access freed memory when traversing LoadGroups after having had released the Group when iterating over StoreGroups.
The fix is to include mayWriteToMemory() when validating that two
instructions are the same kind of memory operation.
Reviewers: mssimpso, davidxl
Reviewed By: davidxl
Subscribers: hsaito, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D43064
llvm-svn: 324786
Summary:
Loops with inequality comparers, such as:
// unsigned bound
for (unsigned i = 1; i < bound; ++i) {...}
have getSmallConstantMaxTripCount report a large maximum static
trip count - in this case, 0xffff fffe. However, profiling info
may show that the trip count is much smaller, and thus
counter-recommend vectorization.
This change:
- flips loop-vectorize-with-block-frequency on by default.
- validates profiled loop frequency data supports vectorization,
when static info appears to not counter-recommend it. Absence
of profile data means we rely on static data, just as we've
done so far.
Reviewers: twoh, mkuper, davidxl, tejohnson, Ayal
Reviewed By: davidxl
Subscribers: bkramer, llvm-commits
Differential Revision: https://reviews.llvm.org/D42946
llvm-svn: 324543
The type-shrinking logic in reduction detection, although narrow in scope, is
also rather ad-hoc, which has led to bugs (e.g., PR35734). This patch modifies
the approach to rely on the demanded bits and value tracking analyses, if
available. We currently perform type-shrinking separately for reductions and
other instructions in the loop. Long-term, we should probably think about
computing minimal bit widths in a more complete way for the loops we want to
vectorize.
PR35734
Differential Revision: https://reviews.llvm.org/D42309
llvm-svn: 324195
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323662
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323530
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323441
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323430
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323348
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
llvm-svn: 323246
Summary:
If the vectorized tree has truncate to minimum required bit width and
the vector type of the cast operation after the truncation is the same
as the vector type of the cast operands, count cost of the vector cast
operation as 0, because this cast will be later removed.
Also, if the vectorization tree root operations are integer cast operations, do not consider them as candidates for truncation. It will just create extra number of the same vector/scalar operations, which will be removed by instcombiner.
Reviewers: RKSimon, spatel, mkuper, hfinkel, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41948
llvm-svn: 322946
Summary: Sometimes vectorization of insertelement instructions with extractelement operands may produce an extra shuffle operation, if these operands are in the reverse order. Patch tries to improve this situation by the reordering of the operands to remove this extra shuffle operation.
Reviewers: mkuper, hfinkel, RKSimon, spatel
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D33954
llvm-svn: 322579
