Commit Graph

1454 Commits

Author SHA1 Message Date
Matt Arsenault
d0943537e1 GlobalISel: Apply target MMO flags to atomics
Unify MMO flag handling with SelectionDAG like with loads and stores.
2020-01-16 13:49:43 -05:00
Matt Arsenault
0d0fce42b0 GlobalISel: Preserve load/store metadata in IRTranslator
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.

Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
2020-01-16 13:49:43 -05:00
Ulrich Weigand
81ee484484 [FPEnv] Fix chain handling regression after 04a8696
Code in getRoot made the assumption that every node in PendingLoads
must always itself have a dependency on the current DAG root node.

After the changes in 04a8696, it turns out that this assumption no
longer holds true, causing wrong codegen in some cases (e.g. stores
after constrained FP intrinsics might get deleted).

To fix this, we now need to make sure that the TokenFactor created
by getRoot always includes the previous root, if there is no implicit
dependency already present.

The original getControlRoot code already has exactly this check,
so this patch simply reuses that code now for getRoot as well.
This fixes the regression.

NFC if no constrained FP intrinsic is present.
2020-01-14 14:10:57 +01:00
Ulrich Weigand
04a86966fb [FPEnv] Fix chain handling for fpexcept.strict nodes
We need to ensure that fpexcept.strict nodes are not optimized away even if
the result is unused. To do that, we need to chain them into the block's
terminator nodes, like already done for PendingExcepts.

This patch adds two new lists of pending chains, PendingConstrainedFP and
PendingConstrainedFPStrict to hold constrained FP intrinsic nodes without
and with fpexcept.strict markers. This allows not only to solve the above
problem, but also to relax chains a bit further by no longer flushing all
FP nodes before a store or other memory access. (They are still flushed
before nodes with other side effects.)

Reviewed By: craig.topper

Differential Revision: https://reviews.llvm.org/D72341
2020-01-13 14:38:49 +01:00
Bevin Hansson
8e2b44f7e0 [Intrinsic] Add fixed point division intrinsics.
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:

  llvm.sdiv.fix.*
  llvm.udiv.fix.*

These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.

Patch by: ebevhan

Reviewers: bjope, leonardchan, efriedma, craig.topper

Reviewed By: craig.topper

Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D70007
2020-01-08 15:17:46 +01:00
Bill Wendling
e886e762dd Revert "Allow output constraints on "asm goto""
This reverts commit 52366088a8.

I accidentally pushed this before supporting changes.
2020-01-07 13:44:08 -08:00
Bill Wendling
52366088a8 Allow output constraints on "asm goto"
Summary:
Remove the restrictions that preventing "asm goto" from returning non-void
values. The values returned by "asm goto" are only valid on the "fallthrough"
path.

Reviewers: jyknight, nickdesaulniers, hfinkel

Reviewed By: jyknight, nickdesaulniers

Subscribers: rsmith, hiraditya, llvm-commits, cfe-commits, craig.topper, rnk

Tags: #clang, #llvm

Differential Revision: https://reviews.llvm.org/D69876
2020-01-07 13:40:26 -08:00
James Henderson
d68904f957 [NFC] Fix trivial typos in comments
Reviewed By: jhenderson

Differential Revision: https://reviews.llvm.org/D72143

Patch by Kazuaki Ishizaki.
2020-01-06 10:50:26 +00:00
Reid Kleckner
9c2b72821b Move tail call disabling code to target independent code
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).

There's no major functionality change, except for targets that never
implemented this check.

This LLVM attribute was originally added in
d9699bc7bd (2015).

Reviewers: echristo, MaskRay

Differential Revision: https://reviews.llvm.org/D72118
2020-01-03 11:27:41 -08:00
Matt Arsenault
0d9f919b73 DAG: Use TargetConstant for FENCE operands 2020-01-02 17:16:10 -05:00
Fangrui Song
87fb204e8f [SelectionDAG] Simplify SelectionDAGBuilder::visitInlineAsm 2020-01-02 09:44:23 -08:00
Ulrich Weigand
63336795f0 [FPEnv] Default NoFPExcept SDNodeFlag to false
The NoFPExcept bit in SDNodeFlags currently defaults to true, unlike all
other such flags. This is a problem, because it implies that all code that
transforms SDNodes without copying flags can introduce a correctness bug,
not just a missed optimization.

This patch changes the default to false. This makes it necessary to move
setting the (No)FPExcept flag for constrained intrinsics from the
visitConstrainedIntrinsic routine to the generic visit routine at the
place where the other flags are set, or else the intersectFlagsWith
call would erase the NoFPExcept flag again.

In order to avoid making non-strict FP code worse, whenever
SelectionDAGISel::SelectCodeCommon matches on a set of orignal nodes
none of which can raise FP exceptions, it will preserve this property
on all results nodes generated, by setting the NoFPExcept flag on
those result nodes that would otherwise be considered as raising
an FP exception.

To check whether or not an SD node should be considered as raising
an FP exception, the following logic applies:

- For machine nodes, check the mayRaiseFPException property of
  the underlying MI instruction
- For regular nodes, check isStrictFPOpcode
- For target nodes, check a newly introduced isTargetStrictFPOpcode

The latter is implemented by reserving a range of target opcodes,
similarly to how memory opcodes are identified. (Note that there a
bit of a quirk in identifying target nodes that are both memory nodes
and strict FP nodes. To simplify the logic, right now all target memory
nodes are automatically also considered strict FP nodes -- this could
be fixed by adding one more range.)

Reviewed By: craig.topper

Differential Revision: https://reviews.llvm.org/D71841
2020-01-02 16:59:45 +01:00
Mark de Wever
8dc7b982b4 [NFC] Fixes -Wrange-loop-analysis warnings
This avoids new warnings due to D68912 adds -Wrange-loop-analysis to -Wall.

Differential Revision: https://reviews.llvm.org/D71857
2020-01-01 20:01:37 +01:00
Fangrui Song
6f9b4c6826 [SelectionDAT] Simplify SelectionDAGBuilder::visitInlineAsm
Indirect C_Immediate or C_Other constraints have been excluded.

Also simplify an unneeded change to indirect 'X' by D60942.
2019-12-29 20:53:30 -08:00
Fangrui Song
044cc919f4 Delete setjmp_undefined_for_msvc workaround after llvm.setjmp was removed 2019-12-27 18:09:22 -08:00
Fangrui Song
7a7334663c Delete llvm.{sig,}{setjmp,longjmp} remnant after r136821
Intrinsic has incorrect argument type!
  i32 (i32*)* @llvm.setjmp

*wipes tear*
2019-12-27 00:00:14 -08:00
Fangrui Song
e0d855b399 [SelectionDAG] Change SelectionDAGISel::{funcInfo,SDB} to use unique_ptr
CurDAG is referenced more than 2000 times and used in many gerated .cpp
files. Don't touch it for now.
2019-12-23 22:41:05 -08:00
Valentin Churavy
fb0ccff6e5
[SelectionDAG] Copy FP flags when visiting a binary instruction.
Summary:
We noticed in Julia that the sequence below no longer turned into
a sequence of FMA instructions in LLVM 7+, but it did in LLVM 6.

```
    %29 = fmul contract <4 x double> %wide.load, %wide.load16
    %30 = fmul contract <4 x double> %wide.load13, %wide.load17
    %31 = fmul contract <4 x double> %wide.load14, %wide.load18
    %32 = fmul contract <4 x double> %wide.load15, %wide.load19
    %33 = fadd fast <4 x double> %vec.phi, %29
    %34 = fadd fast <4 x double> %vec.phi10, %30
    %35 = fadd fast <4 x double> %vec.phi11, %31
    %36 = fadd fast <4 x double> %vec.phi12, %32
```

Unlike Clang, Julia doesn't set the `unsafe-fp-math=true` function
attribute, but rather emits more local instruction flags.

This partially undoes https://reviews.llvm.org/D46854 and if required I can try to minimize the test further.

Reviewers: spatel, mcberg2017

Reviewed By: spatel

Subscribers: chriselrod, merge_guards_bot, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D71495
2019-12-22 14:29:36 -05:00
Craig Topper
cfe316007f [SelectionDAGBuilder] Use getConstant instead of getTargetConstant to build the offset for struct types in getUniformBase.
getTargetConstant prevents any optimizations from operating on the
value and basically says its already been iseled. But since we
want the index to be in a register, this isn't true.

Prior to this we were generating a vbroadcast with an immediate
argument which is illegal and was flagged by the expensive checks
bot.
2019-12-18 10:44:28 -08:00
stozer
89d19d60ad Reapply: [DebugInfo] Correctly handle salvaged casts and split fragments at ISel
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.

The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
2019-12-18 16:26:42 +00:00
stozer
1f3dd83cc1 Revert "[DebugInfo] Correctly handle salvaged casts and split fragments at ISel"
Reverted due to build failure on windows bots.

This reverts commit bb1b0bc4e5.
2019-12-18 11:46:10 +00:00
stozer
bb1b0bc4e5 [DebugInfo] Correctly handle salvaged casts and split fragments at ISel
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.

There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
2019-12-18 11:09:18 +00:00
Wang, Pengfei
8cc0b58673 [X86] Add calculation for elements in structures in getting uniform base for the Gather/Scatter intrinsic.
Summary: Add calculation for elements in structures in getting uniform
base for the Gather/Scatter intrinsic.

Reviewers: craig.topper, c-rhodes, RKSimon

Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D71442
2019-12-18 12:24:58 +08:00
Alex Richardson
11448eeb72 [NFC] Use SelectionDAG::getMemBasePlusOffset() instead of getNode(ISD::ADD)
Summary:
To find potential opportunities to use getMemBasePlusOffset() I looked at
all ISD::ADD uses found with the regex getNode\(ISD::ADD,.+,.+Ptr
in lib/CodeGen/SelectionDAG. If this patch is accepted I will convert
the files in the individual backends too.

The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.

We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.

Reviewers: spatel

Reviewed By: spatel

Subscribers: merge_guards_bot, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D71207
2019-12-13 21:40:03 +00:00
stozer
e39e2b4a79 [DebugInfo] Prevent invalid fragments at ISel from dropping debug info
During SelectionDAG, if a value which is associated with a DBG_VALUE
needs to be split across multiple registers, the DBG_VALUE will be split
into a set of fragment expressions to recreate the original value.

If one or more of these fragments cannot be created, they would
previously be silently dropped, causing the old debug value to live past
its expiry date. This patch fixes this issue by keeping invalid
fragments while setting their value as Undef.

Differential revision: https://reviews.llvm.org/D70248
2019-12-12 12:28:39 +00:00
Reid Kleckner
5d986953c8 [IR] Split out target specific intrinsic enums into separate headers
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
  Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
  object file size.
- Incremental step towards decoupling target intrinsics.

The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.

Part of PR34259

Reviewers: efriedma, echristo, MaskRay

Reviewed By: echristo, MaskRay

Differential Revision: https://reviews.llvm.org/D71320
2019-12-11 18:02:14 -08:00
Ulrich Weigand
9db13b5a7d [FPEnv] Constrained FCmp intrinsics
This adds support for constrained floating-point comparison intrinsics.

Specifically, we add:

      declare <ty2>
      @llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
                                          metadata <condition code>,
                                          metadata <exception behavior>)
      declare <ty2>
      @llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
                                           metadata <condition code>,
                                           metadata <exception behavior>)

The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).

The condition code is implemented as a metadata string.  The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).

These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations.  Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes.  The patch includes support
for the common legalization operations for those nodes.

The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).

Differential Revision: https://reviews.llvm.org/D69281
2019-12-07 11:28:39 +01:00
Ulrich Weigand
daee549b17 [FPEnv][SelectionDAG] Relax chain requirements
This patch implements the following changes:

1) SelectionDAGBuilder::visitConstrainedFPIntrinsic currently treats
each constrained intrinsic like a global barrier (e.g. a function call)
and fully serializes all pending chains. This is actually not required;
it is allowed for constrained intrinsics to be reordered w.r.t one
another or (nonvolatile) memory accesses. The MI-level scheduler already
allows for that flexibility, so it makes sense to allow it at the DAG
level as well.

This patch therefore changes the way chains for constrained intrisincs
are created, and handles them basically like load operations are handled.
This has the effect that constrained intrinsics are no longer serialized
against one another or (nonvolatile) loads. They are still serialized
against stores, but that seems hard to change with the current DAG chain
setup, and it also doesn't seem to be a big problem preventing DAG

2) The OPC_CheckFoldableChainNode check requires that each of the
intermediate nodes in a multi-node pattern match only has a single use.
This check tends to fail if those intermediate nodes are strict operations
as those have a chain output that typically indeed has another use.
However, we don't really need to consider chains here at all, since they
will all be rewritten anyway by UpdateChains later. Other parts of the
matcher therefore already ignore chains, but this hasOneUse check doesn't.

This patch replaces hasOneUse by a custom test that verifies there is no
more than one use of any non-chain output value.

In theory, this change could affect code unrelated to strict FP nodes,
but at least on SystemZ I could not find any single instance of that
happening

3) The SystemZ back-end currently does not allow matching multiply-and-
extend operations (32x32 -> 64bit or 64x64 -> 128bit FP multiply) for
strict FP operations.  This was not possible in the past due to the
problems described under 1) and 2) above.

With those issues fixed, it is now possible to fully support those
instructions in strict mode as well, and this patch does so.

Differential Revision: https://reviews.llvm.org/D70913
2019-12-06 11:02:11 +01:00
David Green
b5315ae8ff [Codegen][ARM] Add addressing modes from masked loads and stores
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.

To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.

This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
   Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
   legality of masked operations as well as normal ones. This array is
   fairly small, so doubling the size still won't make it very large.
   Offset masked loads can then be controlled with
   setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
   CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
   the same way.
- The ARM backend is then adjusted to make use of these indexed masked
   loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.

Differential Revision: https://reviews.llvm.org/D70176
2019-11-26 16:21:01 +00:00
Hiroshi Yamauchi
52e377497d [PGO][PGSO] DAG.shouldOptForSize part.
Summary:
(Split of off D67120)

SelectionDAG::shouldOptForSize changes for profile guided size optimization.

Reviewers: davidxl

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D70095
2019-11-21 14:16:00 -08:00
Serge Pavlov
ea8678d1c7 Move floating point related entities to namespace level
This is recommit of commit e6584b2b7b, which was reverted in
30e7ee3c4b together with af57dbf12e.
Original message is below.

Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.

This change moves these definitioins to the namespace llvm::fp.
No functional changes.

Differential Revision: https://reviews.llvm.org/D69552
2019-11-20 19:05:46 +07:00
Serge Pavlov
0c50c0b055 [FEnv] File with properties of constrained intrinsics
Summary
In several places we need to enumerate all constrained intrinsics or IR
nodes that should be represented by them. It is easy to miss some of
the cases. To make working with these intrinsics more convenient and
robust, this change introduces file containing definitions of all
constrained intrinsics and some of their properties. This file can be
included to generate constrained intrinsics processing code.

Reviewers: kpn, andrew.w.kaylor, cameron.mcinally, uweigand

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69887
2019-11-20 13:30:07 +07:00
Matt Arsenault
b696b9dba7 DAG: Add function context to isFMAFasterThanFMulAndFAdd
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.

AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
2019-11-19 19:25:26 +05:30
Eric Christopher
30e7ee3c4b Temporarily Revert "Add support for options -frounding-math, ftrapping-math, -ffp-model=, and -ffp-exception-behavior="
and a follow-up NFC rearrangement as it's causing a crash on valid. Testcase is on the original review thread.

This reverts commits af57dbf12e and e6584b2b7b
2019-11-18 10:46:48 -08:00
Graham Hunter
3f08ad611a [SVE][CodeGen] Scalable vector MVT size queries
* Implements scalable size queries for MVTs, split out from D53137.

* Contains a fix for FindMemType to avoid using scalable vector type
  to contain non-scalable types.

* Explicit casts for several places where implicit integer sign
  changes or promotion from 32 to 64 bits caused problems.

* CodeGenDAGPatterns will treat scalable and non-scalable vector types
  as different.

Reviewers: greened, cameron.mcinally, sdesmalen, rovka

Reviewed By: rovka

Differential Revision: https://reviews.llvm.org/D66871
2019-11-18 12:30:59 +00:00
Serge Pavlov
e6584b2b7b Move floating point related entities to namespace level
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.

This change moves these definitioins to the namespace llvm::fp.
No functional changes.

Differential Revision: https://reviews.llvm.org/D69552
2019-11-15 19:56:33 +07:00
aqjune
e87d71668e [IR] Redefine Freeze instruction
Summary:
This patch redefines freeze instruction from being UnaryOperator to a subclass of UnaryInstruction.

ConstantExpr freeze is removed, as discussed in the previous review.
FreezeOperator is not added because there's no ConstantExpr freeze.
`freeze i8* null` test is added to `test/Bindings/llvm-c/freeze.ll` as well, because the null pointer-related bug in `tools/llvm-c/echo.cpp` is now fixed.
InstVisitor has visitFreeze now because freeze is not unaryop anymore.

Reviewers: whitequark, deadalnix, craig.topper, jdoerfert, lebedev.ri

Reviewed By: craig.topper, lebedev.ri

Subscribers: regehr, nlopes, mehdi_amini, hiraditya, steven_wu, dexonsmith, jfb, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69932
2019-11-12 10:49:00 +09:00
aqjune
58acbce3de [IR] Add Freeze instruction
Summary:
- Define Instruction::Freeze, let it be UnaryOperator
- Add support for freeze to LLLexer/LLParser/BitcodeReader/BitcodeWriter
  The format is `%x = freeze <ty> %v`
- Add support for freeze instruction to llvm-c interface.
- Add m_Freeze in PatternMatch.
- Erase freeze when lowering IR to SelDag.

Reviewers: deadalnix, hfinkel, efriedma, lebedev.ri, nlopes, jdoerfert, regehr, filcab, delcypher, whitequark

Reviewed By: lebedev.ri, jdoerfert

Subscribers: jfb, kristof.beyls, hiraditya, lebedev.ri, steven_wu, dexonsmith, xbolva00, delcypher, spatel, regehr, trentxintong, vsk, filcab, nlopes, mehdi_amini, deadalnix, llvm-commits

Differential Revision: https://reviews.llvm.org/D29011
2019-11-05 15:54:56 +09:00
Ulrich Weigand
664f84e246 [FPEnv][SelectionDAG] Refactor strict FP node construction
Small refactoring in visitConstrainedFPIntrinsic that should make
it easier to create DAG nodes requiring extra arguments.  That is
the case currently only for STRICT_FP_ROUND, but may be the case
for additional nodes (in particular compares) in the future.

Extracted from the patch for D69281.

NFC.
2019-11-04 17:45:54 +01:00
Hiroshi Yamauchi
0d987e411a [PGO][PGSO] TargetLowering/TargetTransformationInfo/SwitchLoweringUtils part.
Summary:
(Split of off D67120)

TargetLowering/TargetTransformationInfo/SwitchLoweringUtils changes for profile
guided size optimization.

Reviewers: davidxl

Subscribers: eraman, hiraditya, haicheng, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69580
2019-10-31 13:22:56 -07:00
Jeremy Morse
3137fe4d23 [DebugInfo][DAG] Distinguish different kinds of location indirection
From SelectionDAGs point of view, debug variable locations specified with
dbg.declare and dbg.addr are indirect -- they specify the address of
something. But calling conventions might mean that a Value is placed on
the stack somewhere, and this too is indirection. Previously this was
mixed up in the "IsIndirect" field of DBG_VALUE insts; this patch
separates them by encoding the indirection in a DIExpression.

If we have a dbg.declare or dbg.addr, then the expression produces an
address that then becomes a DWARF memory location. We can represent
this by putting a DW_OP_deref on the _end_ of the expression. If a Value
has been placed on the stack, then we need to put a DW_OP_deref on the
_start_ of the expression, to load the Value from the stack and have
the rest of the expression operate on it.

Differential Revision: https://reviews.llvm.org/D69028
2019-10-30 18:41:44 +00:00
Greg Bedwell
1ba72a81ca Fix some spelling mistakes in comments. NFC 2019-10-29 12:41:24 +00:00
Andrew Paverd
d157a9bc8b Add Windows Control Flow Guard checks (/guard:cf).
Summary:
A new function pass (Transforms/CFGuard/CFGuard.cpp) inserts CFGuard checks on
indirect function calls, using either the check mechanism (X86, ARM, AArch64) or
or the dispatch mechanism (X86-64). The check mechanism requires a new calling
convention for the supported targets. The dispatch mechanism adds the target as
an operand bundle, which is processed by SelectionDAG. Another pass
(CodeGen/CFGuardLongjmp.cpp) identifies and emits valid longjmp targets, as
required by /guard:cf. This feature is enabled using the `cfguard` CC1 option.

Reviewers: thakis, rnk, theraven, pcc

Subscribers: ychen, hans, metalcanine, dmajor, tomrittervg, alex, mehdi_amini, mgorny, javed.absar, kristof.beyls, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits

Tags: #clang, #llvm

Differential Revision: https://reviews.llvm.org/D65761
2019-10-28 15:19:39 +00:00
Kerry McLaughlin
da720a38b9 [AArch64][SVE] Implement masked load intrinsics
Summary:
Adds support for codegen of masked loads, with non-extending,
zero-extending and sign-extending variants.

Reviewers: huntergr, rovka, greened, dmgreen

Reviewed By: dmgreen

Subscribers: dmgreen, samparker, tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D68877
2019-10-28 10:06:14 +00:00
Guillaume Chatelet
5df90cd71c [Alignment][NFC] TargetCallingConv::setByValAlign
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790

Reviewers: courbet

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69248

llvm-svn: 375410
2019-10-21 12:05:33 +00:00
Guillaume Chatelet
bac5f6bd21 [Alignment][NFC] TargetCallingConv::setOrigAlign and TargetLowering::getABIAlignmentForCallingConv
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790

Reviewers: courbet

Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69243

llvm-svn: 375407
2019-10-21 11:01:55 +00:00
Graham Hunter
84da2596f9 [AArch64][SVE] Add SPLAT_VECTOR ISD Node
Adds a new ISD node to replicate a scalar value across all elements of
a vector. This is needed for scalable vectors, since BUILD_VECTOR cannot
be used.

Fixes up default type legalization for scalable vectors after the
new MVT type ranges were introduced.

At present I only use this node for scalable vectors. A DAGCombine has
been added to transform a BUILD_VECTOR into a SPLAT_VECTOR if all
elements are the same, but only if the default operation action of
Expand has been overridden by the target.

I've only added result promotion legalization for scalable vector
i8/i16/i32/i64 types in AArch64 for now.

Reviewers: t.p.northover, javed.absar, greened, cameron.mcinally, jmolloy

Reviewed By: jmolloy

Differential Revision: https://reviews.llvm.org/D47775

llvm-svn: 375222
2019-10-18 11:48:35 +00:00
Jeremy Morse
ed29dbaafa [DebugInfo] Remove some users of DBG_VALUEs IsIndirect field
This patch kills off a significant user of the "IsIndirect" field of
DBG_VALUE machine insts. Brought up in in PR41675, IsIndirect is
techncally redundant as it can be expressed by the DIExpression of a
DBG_VALUE inst, and it isn't helpful to have two ways of expressing
things.

Rather than setting IsIndirect, have DBG_VALUE creators add an extra deref
to the insts DIExpression. There should now be no appearences of
IsIndirect=True from isel down to LiveDebugVariables / VirtRegRewriter,
which is ensured by an assertion in LDVImpl::handleDebugValue. This means
we also get to delete the IsIndirect handling in LiveDebugVariables. Tests
can be upgraded by for example swapping the following IsIndirect=True
DBG_VALUE:

  DBG_VALUE $somereg, 0, !123, !DIExpression(DW_OP_foo)

With one where the indirection is in the DIExpression, by _appending_
a deref:

  DBG_VALUE $somereg, $noreg, !123, !DIExpression(DW_OP_foo, DW_OP_deref)

Which both mean the same thing. 

Most of the test changes in this patch are updates of that form; also some
changes in how the textual assembly printer handles these insts.

Differential Revision: https://reviews.llvm.org/D68945

llvm-svn: 374877
2019-10-15 10:46:24 +00:00
Joerg Sonnenberger
9681ea9560 Reapply r374743 with a fix for the ocaml binding
Add a pass to lower is.constant and objectsize intrinsics

This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.

The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.

Differential Revision: https://reviews.llvm.org/D65280

llvm-svn: 374784
2019-10-14 16:15:14 +00:00
Dmitri Gribenko
1a21f98ac3 Revert "Add a pass to lower is.constant and objectsize intrinsics"
This reverts commit r374743. It broke the build with Ocaml enabled:
http://lab.llvm.org:8011/builders/clang-x86_64-debian-fast/builds/19218

llvm-svn: 374768
2019-10-14 12:22:48 +00:00