To resolve symbol context at a particular address, we need to
determine the compiland for the address. We are able to determine
the parent compiland of PDBSymbolFunc, PDBSymbolTypeUDT,
PDBSymbolTypeEnum symbols indirectly through line information.
However no such information is availabile for PDBSymbolData,
i.e. variables.
The Section Contribution table from PDBs has information about
each compiland's contribution to sections by address. For example,
a piece of a contribution looks like,
VA RelativeVA Sect No. Offset Length Compiland
14000087B0 000087B0 0001 000077B0 000000BB exe_main.obj
So given an address, it's possible to determine its compiland with
this information.
llvm-svn: 328178
The hash table is a list of buckets, and the *value* stored in
the bucket cannot be 0 since that is reserved. However, the code
here was incorrectly skipping over the 0'th bucket entirely.
The 0'th bucket is perfectly fine, just none of these buckets
can contain the value 0.
As a result, whenever there was a string where hash(S) % Size
was equal to 0, we would write the value in the next bucket
instead. We never caught this in our tests due to *another*
bug, which is that we would iterate the entire list of buckets
looking for the value, only using the hash value as a starting
point. However, the real algorithm stops when it finds 0 in
a bucket since it takes that to mean "the item is not in the
hash table".
The unit test is updated to carefully construct a set of hash
values that will cause one item to hash to 0 mod bucket count,
and the reader is also updated to return an error indicating that
the item is not found when it encounters a 0 bucket.
llvm-svn: 328162
This is mostly just plumbing to get a DWARFDataExtractor where we
compute abbr_offset so we can use getRelocatedValue.
This is part of PR36793.
llvm-svn: 328154
Summary:
We have had at least three pieces of code (in DWARFAbbreviationDeclaration,
DWARFAcceleratorTable and DWARFDie) that have hand-rolled support for
dumping unknown dwarf enum values. While not terrible, they are a bit
distracting and enable small differences to creep in (Unknown_ffff vs.
Unknown_0xffff). I ended up needing to add a fourth place
(DWARFVerifier), so it seems it would be a good time to centralize.
This patch creates an alternative to the XXXString dumping functions in
the BinaryFormat library, which formats an unknown value as
DW_TYPE_unknown_1234, instead of just an empty string. It is based on
the formatv function, as that allows us to avoid materializing the
string for unknown values (and because this way I don't have to invent a
name for the new functions :P).
In this patch I add formatters for dwarf attributes, forms, tags, and
index attributes as these are the ones in use currently, but adding
other enums is straight-forward.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44570
llvm-svn: 328090
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
llvm-svn: 328014
The issue causing this to fail in certain configurations
should be fixed.
It was due to the fact that DIA apparently expects there to be
a null string at ID 1 in the string table. I'm not sure why this
is important but it seems to make a difference, so set it.
llvm-svn: 328002
Summary:
Redefine PDBSymbolCompiland::getSourceFileName() to return the filename (w/o directory) of the source file that is used to compile the compiland. This is because the result returned previously is ambiguous. It could be the filename, relative path or full path of the source file.
Move the implementation of SymbolFilePDB::GetSourceFileNameForPDBCompiland() into a new method PDBSymbolCompiland::getSourceFileFullPath().
Reviewers: zturner, rnk, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D44458
llvm-svn: 327910
Summary: This commit adds two methods to the PDBSymboFunc class used in parsing symbols. getLineNumbers() is used to determine a Function symbol's declaration and getCompilandId() is used to initialize the SymbolContext field sc.comp_unit.
Reviewers: zturner, rnk, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D44457
llvm-svn: 327909
Natvis is a debug language supported by Visual Studio for
specifying custom visualizers. The /NATVIS option is an
undocumented link.exe flag which will take a .natvis file
and "inject" it into the PDB. This way, you can ship the
debug visualizers for a program along with the PDB, which
is very useful for postmortem debugging.
This is implemented by adding a new "named stream" to the
PDB with a special name of /src/files/<natvis file name>
and simply copying the contents of the xml into this file.
Additionally, we need to emit a single stream named
/src/headerblock which contains a hash table of embedded
files to records describing them.
This patch adds this functionality, including the /NATVIS
option to lld-link.
Differential Revision: https://reviews.llvm.org/D44328
llvm-svn: 327895
Summary:
This patch adds more checks to the .debug_names validator. Specifically,
they check for:
- buckets claiming to be non-empty but pointing to mismatched hashes
(most consumers would interpret this as an empty bucket, but it
questionable whether the generator meant that)
- hashes that are not reachable from any bucket
- names with incorrect hashes
Together, these checks ensure that any name in the index can be reached
through the hash table using the regular lookup algorithm. We also warn
if we encounter a name index without a hash table.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44433
llvm-svn: 327699
There was some code that tried to calculate the number of 4-byte
words required to hold N bits, but it was instead computing the
number of bytes required to hold N bits. This was leading to
extraneous data being output into the hash table, which would
cause certain operations in DIA (the Microsoft PDB reader) to
fail.
llvm-svn: 327675
It previously only worked when the key and value types were
both 4 byte integers. We now have a use case for a non trivial
value type, so we need to extend it to support arbitrary value
types, which means templatizing it.
llvm-svn: 327647
Summary:
Some PDB symbols do not have a valid VA or RVA but have Addr by Section and Offset. For example, a variable in thread-local storage has the following properties:
get_addressOffset: 0
get_addressSection: 5
get_lexicalParentId: 2
get_name: g_tls
get_symIndexId: 12
get_typeId: 4
get_dataKind: 6
get_symTag: 7
get_locationType: 2
This change provides a new method to locate line numbers by Section and Offset from those symbols.
Reviewers: zturner, rnk, llvm-commits
Subscribers: asmith, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44407
llvm-svn: 327601
Summary:
This patch replaces the two switches which are deducing the size of
various forms with a single implementation. I have put the new
implementation into BinaryFormat, to avoid introducing dependencies
between the two independent libraries (DebugInfo and CodeGen) that need
this functionality.
Reviewers: aprantl, JDevlieghere, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44418
llvm-svn: 327486
Make sure that DWARF line information generated by Windows can be properly read by Posix OS and vice versa.
Differential Revision: https://reviews.llvm.org/D44290
llvm-svn: 327430
Injected sources are basically a way to add actual source file content
to your PDB. Presumably you could use this for shipping your source code
with your debug information, but in practice I can only find this being
used for embedding natvis files inside of PDBs.
In order to effectively test LLVM's natvis file injection, we need a way
to dump the injected sources of a PDB in a way that is authoritative
(i.e. based on Microsoft's understanding of the PDB format, and not
LLVM's). To this end, I've added support for dumping injected sources
via DIA. I made a PDB file that used the /natvis option to generate a
test case.
Differential Revision: https://reviews.llvm.org/D44405
llvm-svn: 327428
Summary:
Even though the getDIEOffset offset function was common for the two
accelerator table implementations, it was doing two different things:
for the Apple tables, it was returning the die offset relative to the
start of the section, whereas for DWARF v5 tables, it was relative to
the start of the CU.
I resolve this by renaming the function to getDIESectionOffset to make
it obvious what the function returns, and change the DWARF
implementation to return the section offset. I also keep the CU-relative
accessor, but only in the DWARF implementation (there is no way to get
this information for the Apple tables). This was not caught by existing
tests because the hand-written inputs also erroneously used section
offsets instead of CU-relative ones.
While looking at this, I noticed that the Apple implementation was not
fully correct either -- the header contains a DIEOffsetBase field, which
should be added to offsets encoded with the DW_FORM_ref*** family, but
this was not being used. This went unnoticed because all current writers
set this field to zero anyway. I fix this as well and add a hand-written
test which demonstrates the issue.
Reviewers: JDevlieghere, dblaikie
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D44202
llvm-svn: 327116
Move the DWARF syntax highlighting into support. This has several
advantages, most notably that this makes the WithColor RAII wrapper
available outside libDebugInfo. Furthermore, several projects all have
their own code for handling colored output. This provides a place to
centralize it.
Differential revision: https://reviews.llvm.org/D44215
llvm-svn: 327108
Adding verbose dumping to the recent implementation of dumping of v5 range list entries.
We're capturing the entries as is as they come in during extraction, including their file offset,
so we can dump them in more detail.
The offset table entries which are table-relative are shown as is (as in non-verbose mode)
and with the actual file offset they map to.
Reviewers: dblaikie, aprantl, jdevlieghere, jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43366
llvm-svn: 327059
Summary:
This patch adds basic .debug_names verification capabilities to the
DWARF verifier. Right now, it checks that the headers and abbreviation
tables of the individual name indexes can be parsed correctly, it
verifies the buckets table and the cross-checks the CU lists for
consistency. I intend to add further checks in follow-up patches.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: vleschuk, echristo, clayborg, llvm-commits
Differential Revision: https://reviews.llvm.org/D44211
llvm-svn: 327011
Whilst working on improvements to the error handling of the debug line
parsing code, I noticed that if an invalid offset were to be specified
in a call to getOrParseLineTable(), an entry in the LineTableMap would
still be created, even if the offset was not within the section range.
The immediate parsing attempt afterwards would fail (it would end up
getting a version of 0), and thereafter, any subsequent calls to
getOrParseLineTable or getLineTable would return the default-
constructed, invalid line table. In reality, we shouldn't even attempt
to parse this table, and we should always return a nullptr from these
two functions for this situation.
I have tested this via a unit test, which required some new framework
for unit testing debug line. My plan is to add quite a few more unit
tests for the new error reporting mechanism that will follow shortly,
hence the reason why the supporting code for the tests are written the
way they are - I intend to extend the DwarfGenerator class to support
generating debug line. At that point, I'll make sure that there are a
few positive test cases for this and the parsing code too.
Differential Revision: https://reviews.llvm.org/D44200
Reviewers: JDevlieghere, aprantl
llvm-svn: 326995
Summary:
Original change was D43313 (r326932) and reverted by r326953 because it
broke an LLD test and a windows build. The LLD test was already fixed in
lld commit r326944 (thanks maskray). This is the original change with
the windows build fixed.
llvm-svn: 326970
Currently on Windows (_MSC_VER) LLVMSymbolizer supports only Microsoft mangling.
This fix just explicitly uses itaniumDemangle when mangled name starts with _Z.
Differential Revision: https://reviews.llvm.org/D44192
llvm-svn: 326959
This patch enhances DWARFDebugFrame with the capability of parsing and
printing DWARF expressions in CFI instructions. It also makes FDEs and
CIEs accessible to lib users, so they can process them in client tools
that rely on LLVM. To make it self-contained with a test case, it
teaches llvm-readobj to be able to dump EH frames and checks they are
correct in a unit test. The llvm-readobj code is Maksim Panchenko's work
(maksfb).
Reviewers: JDevlieghere, espindola
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D43313
llvm-svn: 326932
Instead of only printing the CU-relative offset in non-verbose mode, it
makes more sense to only printed the resolved address. In verbose mode
we still print both.
Differential revision: https://reviews.llvm.org/D44148
rdar://33525475
llvm-svn: 326903
Summary: This helps to determine the line number for a PDB type with definition
Reviewers: zturner, llvm-commits, rnk
Reviewed By: zturner
Subscribers: rengolin, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44119
llvm-svn: 326857
Summary:
The symbolizer was checking for .debug as a subdirectory of the
binary file itself, not of the directory containing the binary. This led to
a failure to find split debug info when it was contained in a .debug directory.
Reviewers: rnk, glider, zturner
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D44025
llvm-svn: 326630
For now this is NFC, but this small refactor opens the door to
letting us embed a hash of the PDB in the build id field of the
PDB.
Differential Revision: https://reviews.llvm.org/D43913
llvm-svn: 326453
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
Summary:
This patch implements the name lookup functionality of the .debug_names
accelerator table and hooks it up to "llvm-dwarfdump -find". To make the
interface of the two kinds of accelerator tables more consistent, I've
created an abstract "DWARFAcceleratorTable::Entry" class, which provides
a consistent interface to access the common functionality of the table
entries (such as getting the die offset, die tag, etc.). I've also
modified the apple table to vend entries conforming to this interface.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: vleschuk, clayborg, echristo, llvm-commits
Differential Revision: https://reviews.llvm.org/D43067
llvm-svn: 326003
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Verifying any DWARF file that is optimized and contains at least one tag
with a DW_AT_location with a location list offset as a
DW_AT_form_dataXXX results in dwarfdump spuriously claiming that the
location list is invalid.
Differential revision: https://reviews.llvm.org/D40199
llvm-svn: 325430
This was originally reported as a bug with the symptom being "cvdump
crashes when printing an LLD-linked PDB that has an S_FILESTATIC record
in it". After some additional investigation, I determined that this was
a symptom of a larger problem, and in fact the real problem was in the
way we emitted the global PDB string table. As evidence of this, you can
take any lld-generated PDB, run cvdump -stringtable on it, and it would
return no results.
My hypothesis was that cvdump could not *find* the string table to begin
with. Normally it would do this by looking in the "named stream map",
finding the string /names, and using its value as the stream index. If
this lookup fails, then cvdump would fail to load the string table.
To test this hypothesis, I looked at the name stream map generated by a
link.exe PDB, and I emitted exactly those bytes into an LLD-generated
PDB. Suddenly, cvdump could read our string table!
This code has always been hacky and we knew there was something we
didn't understand. After all, there were some comments to the effect of
"we have to emit strings in a specific order, otherwise things don't
work". The key to fixing this was finally understanding this.
The way it works is that it makes use of a generic serializable hash map
that maps integers to other integers. In this case, the "key" is the
offset into a buffer, and the value is the stream number. If you index
into the buffer at the offset specified by a given key, you find the
name. The underlying cause of all these problems is that we were using
the identity function for the hash. i.e. if a string's offset in the
buffer was 12, the hash value was 12. Instead, we need to hash the
string *at that offset*. There is an additional catch, in that we have
to compute the hash as a uint32 and then truncate it to uint16.
Making this work is a little bit annoying, because we use the same hash
table in other places as well, and normally just using the identity
function for the hash function is actually what's desired. I'm not
totally happy with the template goo I came up with, but it works in any
case.
The reason we never found this bug through our own testing is because we
were building a /parallel/ hash table (in the form of an
llvm::StringMap<>) and doing all of our lookups and "real" hash table
work against that. I deleted all of that code and now everything goes
through the real hash table. Then, to test it, I added a unit test which
adds 7 strings and queries the associated values. I test every possible
insertion order permutation of these 7 strings, to verify that it really
does work as expected.
Differential Revision: https://reviews.llvm.org/D43326
llvm-svn: 325386
Seeing some inlining missing in internal uses of symbolizer. I'll work
on a reproduction, tests, improvements & recommit as soon as possible.
(Chandler would like it to be known that this improvement did make
check-llvm 4x faster... - so there's certainly some fairly good
motivation to push on fixing/figuring this out & getting it back in)
This reverts commit r321345.
llvm-svn: 324981
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
The major visible difference here is that in line-table dumps,
directory and file names are wrapped in double-quotes; previously,
directory names got single quotes and file names were not quoted at
all.
The improvement in this patch is that when a DWARF v5 line table
header has indirect strings, in a verbose dump these will all have
their section[offset] printed as well as the name itself. This
matches the format used for dumping strings in the .debug_info
section.
Differential Revision: https://reviews.llvm.org/D42802
llvm-svn: 324270
This change adds support to llvm-dwarfdump for dumping DWARF5
.debug_rnglists sections in regular ELF files.
It is not complete, in that several DW_RLE_* encodings are currently
not supported, but does dump the headert and the basic ranges for
DW_RLE_start_length and DW_RLE_start_end encodings.
Obvious next steps are to add verbose dumping that dumps the raw
encodings, rather than the interpreted contents, to add -verify support
of the section (e.g. to show that the correct number of offsets are
specified), add dumping of .debug_rnglists.dwo, and to add support for
other encodings.
Reviewed by: dblaikie, JDevlieghere
Differential Revision: https://reviews.llvm.org/D42481
llvm-svn: 324077
Based on a profile, a couple of hot spots were identified in the
main type merging loop. The code was simplified, a few loops
were re-arranged, and some outlined functions were inlined. This
speeds up type merging by a decent amount, shaving around 3-4 seconds
off of a 40 second link in my test case.
Differential Revision: https://reviews.llvm.org/D42559
llvm-svn: 323790
r323476 added support for DW_FORM_line_strp, and incorrectly made that
depend on having a DWARFUnit available. We shouldn't be tracking
.debug_line_str in DWARFUnit after all. After this patch, I can do an
NFC follow up and undo a bunch of the "plumbing" part of r323476.
Differential Revision: https://reviews.llvm.org/D42609
llvm-svn: 323691
The test was failing because of an incorrect sizeof check in the name
index parsing code. This code was meant to check that we have enough
input to parse the fixed-size part of the dwarf header, which it did by
comparing the input to sizeof(Header). Originally struct Header only
contained the fixed-size part, but during review, we've moved additional
members into it, which rendered the sizeof check invalid.
I resolve this by moving the fixed-size part to a separate struct and
updating the sizeof-expression to use that.
llvm-svn: 323648
The call to ScopedPrinter::printNumber with size_t argument was
ambiguous (I think) on 32-bit builds. Explicitly cast to a 64-bit int to
avoid this.
llvm-svn: 323642
Summary:
This modifies the dwarfdump output to align it with the new .debug_names
dump. It also renames two header fields to match similar fields in the
dwarf5 header.
A couple of tests needed to be updated to match new output. The changes
were fairly straight-forward, although not really automatable.
Reviewers: JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42415
llvm-svn: 323641
Summary:
This commit renames DWARFAcceleratorTable to AppleAcceleratorTable to free up
the first name as an interface for the different accelerator tables.
Then I add a DWARFDebugNames class for the dwarf5 table.
Presently, the only common functionality of the two classes is the dump()
method, because this is the only method that was necessary to implement
dwarfdump -debug-names; and because the rest of the
AppleAcceleratorTable interface does not directly transfer to the dwarf5
tables (the main reason for that is that the present interface assumes
the tables are homogeneous, but the dwarf5 tables can have different
keys associated with each entry).
I expect to make the common interface richer as I add more functionality
to the new class (and invent a way to represent it in generic way).
In terms of sharing the implementation, I found the format of the two
tables sufficiently different to frustrate any attempts to have common
parsing or dumping code, so presently the implementations share just low
level code for formatting dwarf constants.
Reviewers: vleschuk, JDevlieghere, clayborg, aprantl, probinson, echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42297
llvm-svn: 323638
This patch moves the DJB hash to support. This is consistent with other
hashing algorithms living there. The hash is used by the DWARF
accelerator tables. We're doing this now because the hashing function is
needed by dsymutil and we don't want to link against libBinaryFormat.
Differential revision: https://reviews.llvm.org/D42594
llvm-svn: 323616
Move standard forms from a switch statement to the table of forms;
fill in all the missing ones defined in DWARF v5. I'm guessing at
classifications in a couple of cases where v5 forms aren't actually
supported yet, but whoever adds support for the forms can fix the
classifications as needed.
llvm-svn: 323481
This form is like DW_FORM_strp, but points to .debug_line_str instead
of .debug_str as the string section. It's intended to be used from
the line-table header, and allows string-pooling of directory and
filenames across compilation units.
Differential Revision: https://reviews.llvm.org/D42553
llvm-svn: 323476
This frees up the first name to be used as an base class for the
apple table and the dwarf5 .debug_names accel table. The rename was
split off from D42297 (adding of debug_names support), which is still
under review.
llvm-svn: 323113
The compilation directory has always been #0, but as of DWARF v5 it is
explicitly listed in the line-table section instead of implicitly
being a reference to the compile_unit DIE's DW_AT_comp_dir attribute.
This means the dumper should number the dumped array starting with 0
or 1 depending on the DWARF version of the line table.
References in the generated DWARF are correct, it's just the dumper
that was wrong. Also some assembler-coded tests were similarly
confused about directory numbers.
llvm-svn: 322884
There's some abstraction overhead in the underlying
mechanisms that were being used, and it was leading to an
abundance of small but not-free copies being made. This
showed up on a profile. Eliminating this and going back to
a low-level byte-based implementation speeds up lld with
/DEBUG between 10 and 15%.
Differential Revision: https://reviews.llvm.org/D42148
llvm-svn: 322871
Summary:
- Fix a bug in PrettyBuiltinDumper that returns "void" as the name for
an unspecified builtin type. Since the unspecified param of a variadic
function is considered a builtin of unspecified type in PDBs, we set
"..." for its name.
- Provide a method to determine if a PDBSymbolFunc is variadic in
PrettyFunctionDumper since PDBSymbolFunc::getArgument() doesn't return the
last unspecified-type param.
- Add a pretty-func-dumper.test to test pretty dumping of variadic
functions.
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41801
llvm-svn: 322608
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
llvm-svn: 321880
inlined subroutines for a given address.
This is essentially the hot path of llvm-symbolizer when extracting
inlined frames during symbolization. Previously, we would read every
subprogram and every inlined subroutine, building a std::map across the
entire PC space to the best DIE, and then do only a handful of queries
as we symbolized a backtrace. A huge fraction of the time was spent
building the map itself.
This patch changes it two a two-level system. First, we just build a map
from PC-interval to DWARF subprograms. These are required to be disjoint
and so constructing this is pretty easy. Second, we build a map *just*
for the inlined subroutines within the subprogram containing the query
address. This allows us to look at far fewer DIEs and build a *much*
smaller set of cached maps in the llvm-symbolizer case where only a few
address get symbolized during the entire run.
It also builds both interval maps in a very different way. It constructs
a single flat vector of pairs that maps from offset -> index. The
indices point into collections of DIE objects, but can also be
"tombstones" (-1) to mark gaps. In the case of subprograms, this mostly
just simplifies the data structure a bit. For inlined subroutines,
because we carefully split them as we build the map, we end up in many
cases having no holes and not having to store both start and stop
offsets.
Finally, the PC ranges for the inlined subroutines are compressed into
32-bits by making them relative to the base PC of the outer subprogram.
This means that if you have a single function body with over 2gb of
executable code in it, we will stop mapping address past the first 2gb
of that function into inlined subroutines and just give you the
subprogram. This doesn't seem like a problem. ;]
All of this combines to make llvm-symbolizer *well* over 2x faster for
symbolizing backtraces out of LLVM's unittests. Death-test heavy unit
tests are running >2x faster. I'm still going to look at completely
disabling symbolization there, but figured while I had a good benchmark
we should make symbolization a bit better.
Sadly, the logic to build the flat interval map for the inlined
subroutines is fairly complex. I'm not super happy about this and
welcome any simplifying suggestions.
Huge thanks to Dave Blaikie who helped walk me through what the various
things I needed to do in DWARF to make this work.
Differential Revision: https://reviews.llvm.org/D40987
llvm-svn: 321345
Reorganizes the DWARF consumer to derive the string offsets table
contribution's format from the contribution header instead of
(incorrectly) from the unit's format.
Reviewers: JDevliegehere, aprantl
Differential Revision: https://reviews.llvm.org/D41146
llvm-svn: 321295
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
llvm-svn: 320719
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
Previously, when linking against libcmt from the MSVC runtime,
lld-link /verbose would show "Ignoring unknown symbol record
with kind 0x1006". It turns out this was because
TypeIndexDiscovery did not handle S_REGISTER records, so these
records were not getting properly remapped.
Patch by: Alexnadre Ganea
Differential Revision: https://reviews.llvm.org/D40919
llvm-svn: 320108
Currently nothing uses this, but this at least gets the core
algorithm in, and adds some test to demonstrate correctness.
Differential Revision: https://reviews.llvm.org/D40736
llvm-svn: 319854
This was storing the hash alongside the key so that the hash
doesn't need to be re-computed every time, but in doing so it
was allocating a structure to keep the key size small in the
DenseMap. This is a noble goal, but it also leads to a pointer
indirection on every probe, and this cost of this pointer
indirection ends up being higher than the cost of having a
slightly larger entry in the hash table. Removing this not only
simplifies the code, but yields a small but noticeable
performance improvement in the type merging algorithm.
llvm-svn: 319493
This class had some code that would automatically remap type
indices before hashing and serializing. The only caller of
this method was the TypeStreamMerger anyway, and the method
doesn't make general sense, and prevents making certain future
improvements to the class. So, factoring this up one level
into the TypeStreamMerger where it belongs.
llvm-svn: 319377
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
The previous implementation would only look 1 DW_AT_specification or DW_AT_abstract_origin deep. This means DWARFDie::getName() would fail in certain cases. I ran into such a case while creating a tool that used the LLVM DWARF parser to generate a symbolication format so I have seen this in the wild.
Differential Revision: https://reviews.llvm.org/D40156
llvm-svn: 319104
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
llvm-svn: 319070
DWARF4 relative DW_AT_high_pc values are now displayed as absolute
addresses. The relative value is only shown when explicitly dumping the
forms, i.e. in show-form or verbose mode.
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x00000019)
```
becomes
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x0000000000000062)
```
Differential revision: https://reviews.llvm.org/D40317
rdar://35416943
llvm-svn: 319044
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
llvm-svn: 318489
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
Patch improves next things:
* Fixes assert/crash in getOpDesc when giving it a invalid expression op code.
* DWARFExpression::print() called DWARFExpression::Operation::getEndOffset() which
returned and used uninitialized field EndOffset. Patch fixes that.
* Teaches verifier to verify DW_AT_location and error out on broken expressions.
Differential revision: https://reviews.llvm.org/D39294
llvm-svn: 316756
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 316619
This fixes possible out of bound access in
DWARFDie::getFirstChild()
which might happen when .debug_info section is corrupted,
like shown in testcase.
Differential revision: https://reviews.llvm.org/D39185
llvm-svn: 316566
The type index is from the TPI stream, not the IPI stream. Fix the
dumper, fix type index discovery, and add a test in LLD.
Also improve the log message we emit when we fail to rewrite type
indices in LLD. That's how I found this bug.
llvm-svn: 316461
This adds type index discovery and dumper support for symbol record kind
0x1168, which is a list of inlined function ids. This symbol kind is
undocumented, but S_INLINEES is consistent with the existing
nomenclature.
Fixes PR34222
llvm-svn: 316398
Currently llvm-dwarfdump runs into llvm_unreachable when
faces DW_CFA_GNU_args_size. Patch implements the support.
Differential revision: https://reviews.llvm.org/D38879
llvm-svn: 315897
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
The test fails on Linux; see follow-up email on the llvm-commits list.
> Add the option to lookup an address in the debug information and print
> out the file, function, block and line table details.
>
> Differential revision: https://reviews.llvm.org/D38409
This also reverts the follow-up r314818:
> [test] Fix llvm-dwarfdump/cmdline.test
>
> Fixes test/tools/llvm-dwarfdump/cmdline.test
llvm-svn: 314825
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 314817
This implement the insertion operator for DWARF address ranges so they
are consistently printed as [LowPC, HighPC).
While a dump method might have felt more consistent, it is used
exclusively for printing error messages in the verifier and never used
for actual dumping. Hence this approach is more intuitive and creates
less clutter at the call sites.
Differential revision: https://reviews.llvm.org/D38395
llvm-svn: 314523
This patch introduces 3 helper functions: error(), warn() and note() to
make printing during verification more consistent. When supported, the
respective prefixes are printed in color using the same color scheme as
clang.
Differential revision: https://reviews.llvm.org/D38368
llvm-svn: 314498
This patch implements the dwarfdump option --find=<name>. This option
looks for a DIE in the accelerator tables and dumps it if found. This
initial patch only adds support for .apple_names to keep the review
small, adding the other sections and pubnames support should be
trivial though.
Differential Revision: https://reviews.llvm.org/D38282
llvm-svn: 314439
This patch adds a check to the DWARF verifier to detect CUs without a
unit DIE.
Differential revision: https://reviews.llvm.org/D38363
llvm-svn: 314426
When dsymutil generates the companion file, its strips all unnecessary
sections by omitting their body and setting the offset in their
corresponding load command to zero.
One such section is the .eh_frame section, as it contains runtime
information rather than debug information and is part of the __TEXT
segment. When reading this section, we would just read the number of
bytes specified in the load command, starting from offset 0 (i.e. the
beginning of the file).
Rather than trying to parse this obviously invalid section, dwarfdump
now skips this.
Differential revision: https://reviews.llvm.org/D38135
llvm-svn: 314208
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
llvm-svn: 313910
This is a bit ugly because we can't put Optional into a union. Hide all
of that behind a set of accessors and make accesses safer using asserts.
llvm-svn: 313884
This patch implements the Darwin dwarfdump option --recurse-depth=<N>,
which limits the recursion depth when selectively printing DIEs at an
offset.
Differential Revision: https://reviews.llvm.org/D38064
llvm-svn: 313778
When symbolizing large binaries, parsing every CU in a DWP file is a
significant performance penalty. Instead, use the index to only load the
CUs that are needed.
llvm-svn: 313659
This speeds up dumping specific DIEs by not parsing abbreviations for
units that are not used.
(this is also handy to have in eventually to speed up llvm-symbolizer
for .dwp files, where parsing most of the DWP file can be avoided by
using the index)
llvm-svn: 313635
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
This is the first of many commits that enable selectively dumping just
one record from the debug info.
This reapplies r313412 with some extra qualification to appease GCC and MSVC.
llvm-svn: 313419
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313255
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313250
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
This patches renames "brief" to "verbose" in de DIDumpOptions and
inverts the logic to match the new behavior where brief is the default.
Changing the default value uncovered some bugs related to the
DIDumpOptions not being propagated and have been fixed as well.
Differential revision: https://reviews.llvm.org/D37745
llvm-svn: 313139
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
This patch adds prologue verification, which is already present in
Apple's dwarfdump. It checks for invalid directory indices and warns
about duplicate file paths.
Differential revision: https://reviews.llvm.org/D37511
llvm-svn: 312782
It is possible for two modules to have the same name if they are
archive members with the same name, or if we are doing LTO (in which
case all modules will have the name "lto.tmp").
Differential Revision: https://reviews.llvm.org/D37589
llvm-svn: 312744
It solves issue of wrong section index evaluating for ranges when
base address is used.
Based on David Blaikie's patch D36097.
Differential revision: https://reviews.llvm.org/D37214
llvm-svn: 312477
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
llvm-svn: 312358
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
llvm-svn: 312276
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
llvm-svn: 312042
We were using a std::vector<> and resizing to MaxRecordLength,
which is ~64KB. We would then do this repeatedly often many
times in a tight loop, which was causing measurable performance
impact when linking PDBs.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36940
llvm-svn: 311375
computeAddrMap function calls std::stable_sort with a comparison
function that computes deserialized symbols every time its called.
In the result deserializeAs<PublicSym32> is called 20-30 times per
symbol. It's much faster to calculate it beforehand and pass a
pointer to it to the comparison function.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36941
llvm-svn: 311373
This adds support for dumping a summary of module symbols
and CodeView debug chunks. This option prints a table for
each module of all of the symbols that occurred in the module
and the number of times it occurred and total byte size. Then
at the end it prints the totals for the entire file.
Additionally, this patch adds the -jmc (just my code) option,
which suppresses modules which are from external libraries or
linker imports, so that you can focus only on the object files
and libraries that originate from your own source code.
llvm-svn: 311338
This patch hides the .debug_str offset and DIE reference offsets into
the CU when llvm-dwarfdump is invoked with -brief.
Differential Revision: https://reviews.llvm.org/D36835
llvm-svn: 311201
When dumping, we were treating the S_INLINESITESYM as referring
to a type record, when it actually refers to an id record. We
had this correct in TypeIndexDiscovery, so our merging algorithm
should be fine, but we had it wrong in the dumper, which means it
would appear to work most of the time, unless the index was out
of bounds in the type stream, when it would fail. Fixed this, and
audited a few other cases to make them match the behavior in
TypeIndexDiscovery.
Also, I've now observed a new symbol record with kind 0x1168 which
I have no clue what it is, so to avoid crashing we have to just
print "Unknown Symbol Kind".
llvm-svn: 311117
As was requested in D36313 thread,
with this patch section names and uniqueness calculated once,
and not every time when a range is dumped.
Differential revision: https://reviews.llvm.org/D36740
llvm-svn: 310923
Teaches llvm-dwarfdump to print section index and name of range
when it dumps .debug_info.
Differential revision: https://reviews.llvm.org/D36313
llvm-svn: 310915
Previously we were writing an empty globals stream. Windows
tools interpret this as "private symbols are not present in
this PDB", even when they are, so we need to fix this. Regardless,
without it we don't have information about global variables, so
we need to fix it anyway. This patch does that.
With this patch, the "lm" command in WinDbg correctly reports
that we have private symbols available, but the "dv" command
still refuses to display local variables.
Differential Revision: https://reviews.llvm.org/D36535
llvm-svn: 310743
In the refactor to merge the publics and globals stream, a bug
was introduced that wrote the wrong value for one of the fields
of the PublicsStreamHeader. This caused debugging in WinDbg
to break.
We had no way of dumping any of these fields, so in addition to
fixing the bug I've added dumping support for them along with a
test that verifies the correct value is written.
llvm-svn: 310439
The publics stream and globals stream are very similar. They both
contain a list of hash buckets that refer into a single shared stream,
the symbol record stream. Because of the need for each builder to manage
both an independent hash stream as well as a single shared record
stream, making the two builders be independent entities is not the right
design. This patch merges them into a single class, of which only a
single instance is needed to create all 3 streams. PublicsStreamBuilder
and GlobalsStreamBuilder are now merged into the single GSIStreamBuilder
class, which writes all 3 streams at once.
Note that this patch does not contain any functionality change. So we're
still not yet writing any records to the globals stream. All we're doing
is making it so that when we do start writing records to the globals,
this refactor won't have to be part of that patch.
Differential Revision: https://reviews.llvm.org/D36489
llvm-svn: 310438
The compiler outputs PROC32_ID symbols into the object files
for functions, and these symbols have an embedded type index
which, when copied to the PDB, refer to the IPI stream. However,
the symbols themselves are also converted into regular symbols
(e.g. S_GPROC32_ID -> S_GPROC32), and type indices in the regular
symbol records refer to the TPI stream. So this patch applies
two fixes to function records.
1. It converts ID symbols to the proper non-ID record type.
2. After remapping the type index from the object file's index
space to the PDB file/IPI stream's index space, it then
remaps that index to the TPI stream's index space by.
Besides functions, during the remapping process we were also
discarding symbol record types which we did not recognize.
In particular, we were discarding S_BPREL32 records, which is
what MSVC uses to describe local variables on the stack. So
this patch fixes that as well by copying them to the PDB.
Differential Revision: https://reviews.llvm.org/D36426
llvm-svn: 310394
These lead to tests failing spuriously as the values after being rendered to a
string were incorrect.
Reviewers: clayborg
Differential Revision: https://reviews.llvm.org/D36319
llvm-svn: 310262
This extends the native reader to enable llvm-pdbutil to list the enums in a
PDB and it includes a simple test. It does not yet list the values in the
enumerations, which requires an actual implementation of
NativeEnumSymbol::FindChildren.
To exercise this code, use a command like:
llvm-pdbutil pretty -native -enums foo.pdb
Differential Revision: https://reviews.llvm.org/D35738
llvm-svn: 310144
Summary:
PDB section contributions are supposed to use output section indices and
offsets, not input section indices and offsets.
This allows the debugger to look up the index of the module that it
should look up in the modules stream for symbol information. With this
change, windbg can now find line tables, but it still cannot print local
variables.
Fixes PR34048
Reviewers: zturner
Subscribers: hiraditya, ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D36285
llvm-svn: 309987
The PDB reserves certain blocks for the FPM that describe which
blocks in the file are allocated and which are free. We weren't
filling that out at all, and in some cases we were even stomping
it with incorrect data. This patch writes a correct FPM.
Differential Revision: https://reviews.llvm.org/D36235
llvm-svn: 309896
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
llvm-svn: 309894
Followup to r309570, fixing it slightly differently (ranges_base and
addr_base should never be read from a DWO file - so there shouldn't be
any issue with 'overriding' the values - conditionalize the code and
assert that the values aren't being overriden).
llvm-svn: 309879
We don't write any actual symbols to this stream yet, but for
now we just create the stream and hook it up to the appropriate
places and give it a valid header.
Differential Revision: https://reviews.llvm.org/D35290
llvm-svn: 309608
DIEs are lazily deserialized so it's possible that the DWO CU is created
before the DIE is parsed. DWO shares .debug_addr and .debug_ranges with the
object file so overwriting the offset with 0 will make the CU unusable.
No test case because I couldn't get clang to emit a non-zero range base.
llvm-svn: 309570
I was a bit lazy when I first implemented this & skipped the index
lookup - obviously for large files this becomes pretty crucial, so here
we go, do the index lookup. Speeds up large DWP symbolizing by... lots.
(20m -> 20s, actually, maybe more in a release build (that was a release
build without index lookup, compared to a debug/non-release build with
the index usage))
llvm-svn: 309507
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
With ASan, we would write about 512 bytes of malloc fill value to the
PDB, with some random bits ORed in here and there. Dumping the PDB would
always fail reliably.
llvm-svn: 309331
Summary:
MSVC link.exe records all external symbol names in the publics stream.
It provides similar functionality to an ELF .symtab.
Reviewers: zturner, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35871
llvm-svn: 309303
The PDB "symbol stream" actually contains symbol records for the publics
and the globals stream. The globals and publics streams are essentially
hash tables that point into a single stream of records. In order to
match cvdump's behavior, we need to only dump symbol records referenced
from the hash table. This patch implements that, and then implements
global stream dumping, since it's just a subset of public stream
dumping.
Now we shouldn't see S_PROCREF or S_GDATA32 records when dumping
publics, and instead we should see those record in the globals stream.
llvm-svn: 309066
Mostly just to silence a warning about an unhandled case. There don't seem to
be any tests for this operator (at least that I could find).
llvm-svn: 308901
This includes the hash table, the address map, and the thunk table and
section offset table. The last two are only used for incremental
linking, which LLD doesn't support, so they are less interesting. The
hash table is particularly important to get right, since this is the one
of the streams that debuggers use to translate addresses to symbols.
llvm-svn: 308764
SUMMARY
This patch adds a verification check on the abbreviation declarations in the .debug_abbrev section.
The check makes sure that no abbreviation declaration has more than one attributes with the same name.
Differential Revision: https://reviews.llvm.org/D35643
llvm-svn: 308579
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
llvm-svn: 308543
Summary:
This patch modifies the handleDebugInfo() function so that we verify the contents of each unit
in the .debug_info section only if its header has been successfully verified.
This change will allow for more/different verification checks depending on the type of the unit since from
dwarf5, the .debug_info section may consist of different types of units.
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D35521
llvm-svn: 308245
Summary:
This removes the CVTypeVisitor updater and verifier classes. They were
made dead by the minimal type dumping refactoring. Replace them with a
single function that takes a type record and produces a hash. Call this
from the minimal type dumper and compare the hash.
I also noticed that the microsoft-pdb reference repository uses a basic
CRC32 for records that aren't special. We already have an implementation
of that CRC ready to use, because it's used in COFF for ICF.
I'll make LLD call this hashing utility in a follow-up change. We might
also consider using this same hash in type stream merging, so that we
don't have to hash our records twice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35515
llvm-svn: 308240
Summary:
We were treating the GUIDs in TypeServer2Record as strings, and the
non-ASCII bytes in the GUID would not round-trip through YAML.
We already had the PDB_UniqueId type portably represent a Windows GUID,
but we need to hoist that up to the DebugInfo/CodeView library so that
we can use it in the TypeServer2Record as well as in PDB parsing code.
Reviewers: inglorion, amccarth
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35495
llvm-svn: 308234
Summary:
This didn't do much to speed things up, but it implements a FIXME, and I
think it's a nice simplification. We don't need the record kind switch.
We're doing that ourselves.
Reviewers: ruiu, inglorion
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35496
llvm-svn: 308213
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
This patch adds verification checks for the unit header chain in the .debug_info section.
Specifically, for each unit in the .debug_info section, the verifier checks that:
The unit length is valid (i.e. the unit can actually fit in the .debug_info section)
The dwarf version of the unit is valid
The address size is valid (4 or 8)
The unit type (if the unit is in dwarf5) is valid
The debug_abbrev_offset is valid
llvm-svn: 307975
Summary:
This fixes type indices for SDK or CRT static archives. Previously we'd
try to look next to the archive object file path, which would not exist
on the local machine.
Also error out if we can't resolve a type server record. Hypothetically
we can recover from this error by discarding debug info for this object,
but that is not yet implemented.
Reviewers: ruiu, amccarth
Subscribers: aprantl, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35369
llvm-svn: 307946
Code to convert MachO - specific section debug section names to standard DWARF v5
section names was in the wrong place.
Differential Revision: https://reviews.llvm.org/D35321
llvm-svn: 307872
Doing so is leaking an implementation detail.
I have an implementation that uses the lld infrastructure and doesn't
use a map or object::SectionRef.
llvm-svn: 307846
Summary:
There is a reserved range of type indexes for built-in types (like integers).
This will create a symbol for a built-in type if the caller askes for one by
type index. This is also plumbing for being able to recall symbols by type
index in general, but user-defined types will come in subsequent patches.
Reviewers: rnk, zturner
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35163
llvm-svn: 307834
Avoid duplicating DictScope with hand-written names everywhere. Print
the S_-prefixed symbol kind for every record. This should make it easier
to search for certain kinds of records when debugging PDB linking.
llvm-svn: 307732
I encountered these when linking LLD, which uses atls.lib. Those objects
appear to use these uncommon symbol records:
0x115E S_HEAPALLOCSITE
0x113D S_ENVBLOCK
0x1113 S_GTHREAD32
0x1153 S_FILESTATIC
llvm-svn: 307725
This is part of the continuing effort to increase parity between
LLD and MSVC PDBs. link still doesn't like our PDBs, so the most
obvious thing to check was whether adding an empty publics stream
would get it to do something else. It still fails in the same way
but at least this removes one more variable from the equation.
The next logical step would be to try creating an empty globals
stream.
Differential Revision: https://reviews.llvm.org/D35224
llvm-svn: 307598
Variable was called 'Name' and contained text
name of relocation type. Problem was that
outside of this error handling scope we already
have different 'Name' variable that contains
section name.
Change helps to avoid confusion.
llvm-svn: 307530
1) Don't write a /src/headerblock stream. This appears to be
written conditionally by MSVC, but it's not clear what the
condition is. For now, just remove it since we dont' know
what it is anyway and the particular pdb we've checked in
for the test doesn't have one.
2) Write a valid timestamp for the PDB file signature. This
leads to non-reproducible builds, but it matches the default
behavior of link, so it should be out default as well. If
we need reproducibility, we should add a separate command
line option for it that is off by default.
3) Write an empty FPO stream. MSVC seems to always write an
FPO stream. This change makes the stream directory match
up, although we still need to make the contents of the FPO
stream match.
llvm-svn: 307436
A couple of things were different about our generated PDBs.
1) We were outputting the wrong Version on the PDB Stream.
The version we were setting was newer than what MSVC is setting.
It's not clear what the implications are, but we change LLD
to use PdbImplVC70, as MSVC does.
2) For the optional debug stream indices in the DBI Stream, we
were outputting 0 to mean "the stream is not present". MSVC
outputs uint16_t(-1), which is the "correct" way to specify
that a stream is not present. So we fix that as well.
3) We were setting the PDB Stream signature to 0. This is supposed
to be the result of calling time(nullptr). Although this leads
to non-deterministic builds, a better way to solve that is by
having a command line option explicitly for generating a
reproducible build, and have the default behavior of lld-link
match the default behavior of link.
To test this, I'm making use of the new and improved `pdb diff`
sub command. To make it suitable for writing tests against, I had
to modify the diff subcommand slightly to print less verbose output.
Previously it would always print | <column> | <value1> | <value2> |
which is quite verbose, and the values are fragile. All we really
want to know is "did we produce the same value as link?" So I added
command line options to print a single character representing the
result status (different, identical, equivalent), and another to
hide the value display. Note that just inspecting the diff output
used to write the test, you can see some things that are obviously
wrong. That is just reflective of the fact that this is the state
of affairs today, not that we're asserting that this is "correct".
We can use this as a starting point to discover differences, fix
them, and update the test.
Differential Revision: https://reviews.llvm.org/D35086
llvm-svn: 307422
We're getting to the point that some MS tools (e.g. DIA) can recognize
our PDBs but others (e.g. link.exe) cannot. I think the way forward is
to improve our tooling to help us find differences more easily. For
example, if we can compile the same program with clang-cl and cl and
have a tool tell us all the places where the PDBs differ, this could
tell us what we're doing wrong. It's tricky though, because there are a
lot of "benign" differences in a PDB. For example, if the string table
in one PDB consists of "foo" followed by "bar" and in the other PDB it
consists of "bar" followed by "foo", this is not necessarily a critical
difference, as long as the uses of these strings also refer to the
correct location. On the other hand, if the second PDB doesn't even
contain the string "foo" at all, this is a critical difference.
diff mode has been in llvm-pdbutil for quite a while, but because of the
above challenge along with some others, it's been hard to make it
useful. I think this patch addresses that. It looks for all the same
things, but it now prints the output in tabular format (carefully
formatted and aligned into tables and fields), and it highlights
critical differences in red, non-critical differences in yellow, and
identical fields in green. This makes it easy to spot the places we
differ, and the general concept of outputting arbitrary fields in
tabular format can be extended to provide analysis into many of the
different types of information that show up in a PDB.
Differential Revision: https://reviews.llvm.org/D35039
llvm-svn: 307421
Based strictly on the name, this seems to have something to do
width edit & continue. The goal of this patch has nothing to do
with supporting edit and continue though. msvc link.exe writes
very basic information into this area even when *not* compiling
with support for E&C, and so the goal here is to bring lld-link
to parity. Since we cannot know what assumptions standard tools
make about the content of PDB files, we need to be as close as
possible.
This ECNames data structure is a standard PDB string hash table.
link.exe puts a single string into this hash table, which is the
full path to the PDB file on disk. It then references this string
from the module descriptor for the compiler generated `* Linker *`
module.
With this patch, lld-link will generate the exact same sequence of
bytes as MSVC link for this subsection for a given object file
input (as reported by `llvm-pdbutil bytes -ec`).
llvm-svn: 307356
Type records have a unique type index, but symbol records do
not. Instead, symbol records refer to other symbol records
by referencing their offset in the symbol stream. In a sense
this is the analogue of the TypeIndex, but we are not printing
it in the dumper. Printing it not only gives us more useful
information when manually investigating the contents of a PDB,
but also allows us to write better tests by enabling us to
verify that fields that reference other symbol records do
so correctly.
Differential Revision: https://reviews.llvm.org/D34906
llvm-svn: 306890
Previously we had the -type-index option which would dump the record of
a single, but we had no way to follow the dependency graph backwards and
also dump all dependent types.
Having this option makes test-writing better, because we can limit the
test to only those records that are of importance for the thing we're
trying to test, which allows us to use things like CHECK-NEXT to reduce
fragility.
Differential Revision: https://reviews.llvm.org/D34899
llvm-svn: 306852
This patch verifies the number of atoms, the validity of the form for each atom, as well as the validity of the
hashdata. For hashdata, we're verifying that the hashdata offset is correct and that the offset in the .debug_info for
each DIE in the hashdata is also valid.
llvm-svn: 306735
Requires callers to directly associate relocations with a DataExtractor
used to read data from a DWARF section, which helps a callee not make
assumptions about which section it is reading.
This is the next step in reducing DWARFFormValue's dependence on DWARFUnit.
Differential Revision: https://reviews.llvm.org/D34704
llvm-svn: 306699
Because of mistake introduced in r306517,
wrong variable ("name" instead of "Name") was used
in error message.
As a result it reported section name instead of
relocation name.
This file still needs cleanup to match LLVM coding style
and more tests I think.
llvm-svn: 306677
Instead of creating symbols directly in the findChildren methods of the native
symbol implementations, they will rely on the NativeSession to act as a factory
for these types. This lets NativeSession cache the NativeRawSymbols in its
new symbol cache and makes that cache the source of unique IDs for the symbols.
Right now, this affects only NativeCompilandSymbols. There's no external
change yet, so I think the existing tests are still sufficient. Coming soon
are patches to extend this to built-in types and enums.
llvm-svn: 306610
With fix in include folder character case:
#include "llvm/Codegen/AsmPrinter.h" -> #include "llvm/CodeGen/AsmPrinter.h"
Original commit message:
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306517
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306512
Some forms have sizes that depend on the DWARF version, DWARF format
(32/64-bit), or the size of an address. Collect these into a struct
to simplify passing them around. Require callers to provide one when
they query a form's size.
Differential Revision: http://reviews.llvm.org/D34570
llvm-svn: 306315
If you dump a pdb to yaml, and then round-trip it back to a pdb,
and run cvdump -l <file> on the new pdb, cvdump will generate
output such as this.
*** LINES
** Module: "d:\src\llvm\test\DebugInfo\PDB\Inputs\empty.obj"
Error: Line number corrupted: invalid file id 0
<Unknown> (MD5), 0001:00000010-0000001A, line/addr pairs = 3
5 00000010 6 00000013 7 00000018
Note the error message about the corrupted line number.
It turns out that the problem is that cvdump cannot find the
/names stream (e.g. the global string table), and the reason it
can't find the /names stream is because it doesn't understand
the NameMap that we serialize which tells pdb consumers which
stream has the string table.
Some experimentation shows that if we add items to the hash
table in a specific order before serializing it, cvdump can read
it. This suggests that either we're using the wrong hash function,
or we're serializing something incorrectly, but it will take some
deeper investigation to figure out how / why. For now, this at
least allows cvdump to read our line information (and incidentally,
produces an identical byte sequence to what Microsoft tools
produce when writing the named stream map).
Differential Revision: https://reviews.llvm.org/D34491
llvm-svn: 306233
This patch dumps the raw bytes of the pdb name map which contains
the mapping of stream name to stream index for the string table
and other reserved streams.
llvm-svn: 306148
The goal here is to make it possible to display absolute
file offsets when dumping byets from an MSF. The problem is
that when dumping bytes from an MSF, often the bytes will
cross a block boundary and encounter a discontinuity. We
can't use the normal formatBinary() function for this because
this would just treat the sequence as entirely ascending, and
not account out-of-order blocks.
This patch adds a formatMsfData() function to our printer, and
then uses this function to improve the output of the -stream-data
command line option for dumping bytes from a particular stream.
Test coverage is also expanded to make sure to include all possible
scenarios of offsets, sizes, and crossing block boundaries.
llvm-svn: 306141
All NativeRawSymbols will have a unique symbol ID (retrievable via
getSymIndexId). For now, these are initialized to 0, but soon the
NativeSession will be responsible for creating the raw symbols, and it will
assign unique IDs.
The symbol cache in the NativeSession will also require the ability to clone
raw symbols, so I've provided implementations for that as well.
llvm-svn: 306042
There doesn't seem to be a compelling reason why this method should be const
other than it was possible with the DIA implementation. The native session
is going to act as a symbol factory and cache. This could be acheived with
mutable (and the existing const_cast), but it seems cleaner to accept that
this method affects the state of the session.
This change eliminates an existing const_cast.
llvm-svn: 306041
Summary:
The main complexity in adding symbol records is that we need to
"relocate" all the type indices. Type indices do not have anything like
relocations, an opaque data structure describing where to find existing
type indices for fixups. The linker just has to "know" where the type
references are in the symbol records. I added an overload of
`discoverTypeIndices` that works on symbol records, and it seems to be
able to link the standard library.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34432
llvm-svn: 305933
There were certain fields that we didn't know how to write, as
well as various padding bytes that we would ignore. This leads
to garbage data in the PDB. While not strictly necessary, we
should initialize these bytes to something meaningful, as it
makes for easier binary comparison between PDBs.
llvm-svn: 305819
Summary:
This is a first step towards getting line info to show up in VS and
windbg. So far, only llvm-pdbutil can parse the PDBs that we produce.
cvdump doesn't like something about our file checksum tables. I'll have
to dig into that next.
This patch adds a new DebugSubsectionRecordBuilder which takes bytes
directly from some other producer, such as a linker, and sticks it into
the PDB. Line tables only need to be relocated. No data needs to be
rewritten.
File checksums and string tables, on the other hand, need to be re-done.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34257
llvm-svn: 305713
Merge the functionality into the random access type collection.
This class was only being used in 2 places, so getting rid of it
simplifies the code.
llvm-svn: 305653
Suppose we had a type index offsets array with a boundary at type index
N. Then you request the name of the type with index N+1, and that name
requires the name of index N-1 (think a parameter list, for example). We
didn't handle this, and we would print something like (<unknown UDT>,
<unknown UDT>).
The fix for this is not entirely trivial, and speaks to a larger
problem. I think we need to kill TypeDatabase, or at the very least kill
TypeDatabaseVisitor. We need a thing that doesn't do any caching
whatsoever, just given a type index it can compute the type name "the
slow way". The reason for the bug is that we don't have anything like
that. Everything goes through the type database, and if we've visited a
record, then we're "done". It doesn't know how to do the expensive thing
of re-visiting dependent records if they've not yet been visited.
What I've done here is more or less copied the code (albeit greatly
simplified) from TypeDatabaseVisitor, but wrapped it in an interface
that just returns a std::string. The logic of caching the name is now in
LazyRandomTypeCollection. Eventually I'd like to move the record
database here as well and the visited record bitfield here as well, at
which point we can actually just delete TypeDatabase. I don't see any
reason for it if a "sequential" collection is just a special case of a
random access collection with an empty partial offsets array.
Differential Revision: https://reviews.llvm.org/D34297
llvm-svn: 305612
The verifier should not output any message in such a case.
Added test case with no .apple_name section in the file to verify new functionality.
Made existing test case more specific.
llvm-svn: 305597
This resubmits commit c0c249e9f2ef83e1d1e5f166b50673d92f3579d7.
It was broken due to some weird template issues, which have
since been fixed.
llvm-svn: 305517
This reverts commit 83ea17ebf2106859a51fbc2a86031b44d33696ad.
This is failing due to some strange template problems, so reverting
until it can be straightened out.
llvm-svn: 305505
After some internal discussions, we agreed that the raw output style had
outlived its usefulness. It was originally created before we had even
thought of dumping to YAML, and it was intended to give us some insight
into the internals of a PDB file. Now we have YAML mode which does
almost exactly this but is more powerful in that it can round-trip back
to a PDB, which the raw mode could not do. So the raw mode had become
purely a maintenance burden.
One option was to just delete it. However, its original goal was to be
as readable as possible while staying close to the "metal" - i.e.
presenting the output in a way that maps directly to the underlying file
format. We don't actually need that last requirement anymore since it's
covered by the yaml mode, so we could repurpose "raw" mode to actually
just be as readable as possible.
This patch implements about 80% of the functionality previously in raw
mode, but in a completely different style that is more akin to what
cvdump outputs. Records are very compressed, often times appearing on
just one line. One nice thing about this is that it makes full record
matching easier, because you can grep for indices, names, and leaf types
on a single line often.
See the tests for some examples of what the new output looks like.
Note that this patch actually regresses the functionality of raw mode in
a few areas, but only because the patch was already unreasonably large
and going 100% would have been even worse. Specifically, this patch is
missing:
The ability to dump module debug subsections (checksums, lines, etc)
The ability to dump section headers
Aside from that everything is here. While goign through the tests fixing
them all up, I found many duplicate tests. They've been deleted. In
subsequent patches I will go through and re-add the missing
functionality.
Differential Revision: https://reviews.llvm.org/D34191
llvm-svn: 305495
This was originally reverted because of some non-deterministic
failures on certain buildbots. Luckily ASAN eventually caught
this as a stack-use-after-scope, so the fix is included in
this patch.
llvm-svn: 305393
This is causing failures on linux bots with an invalid stream
read. It doesn't repro in any configuration on Windows, so
reverting until I have a chance to investigate on Linux.
llvm-svn: 305371
This allows us to use yaml2obj and obj2yaml to round-trip CodeView
symbol and type information without having to manually specify the bytes
of the section. This makes for much easier to maintain tests. See the
tests under lld/COFF in this patch for example. Before they just said
SectionData: <blob> whereas now we can use meaningful record
descriptions. Note that it still supports the SectionData yaml field,
which could be useful for initializing a section to invalid bytes for
testing, for example.
Differential Revision: https://reviews.llvm.org/D34127
llvm-svn: 305366
This patch adds code which verifies that each bucket in the .apple_names
accelerator table is either empty or has a valid hash index.
Differential Revision: https://reviews.llvm.org/D34177
llvm-svn: 305344
Summary:
Expose the module descriptor index and fill it in for section
contributions.
Reviewers: zturner
Subscribers: llvm-commits, ruiu, hiraditya
Differential Revision: https://reviews.llvm.org/D34126
llvm-svn: 305296
The last fix required the user to manually add the required
feature. This caused an LLD test to fail because I failed to
update LLD. In practice we can hide this logic so it can just
be transparently added when we write the PDB.
llvm-svn: 305236
Older PDBs don't have this. Its presence is detected by using
the various "feature" flags that come at the end of the PDB
Stream. Detect this, and don't try to dump the ID stream if the
features tells us it's not present.
llvm-svn: 305235
Static data members were causing a problem because I mistakenly
assumed all members would affect a class's layout and so the
Layout member would be non-null.
llvm-svn: 305229
Previously extractors tried to be stateless with any additional
context information needed in order to parse items being passed
in via the extraction method. This led to quite cumbersome
implementation challenges and awkwardness of use. This patch
brings back support for stateful extractors, making the
implementation and usage simpler.
llvm-svn: 305093
Summary:
RelocOffset is a 32-bit value, but we previously truncated it to 16 bits.
Fixes PR33335.
Reviewers: zturner, hiraditya!
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33968
llvm-svn: 305043
This adds support for Symbols, StringTable, and FrameData subsection
types. Even though these subsections rarely if ever appear in a PDB
file (they are usually in object files), there's no theoretical reason
why they *couldn't* appear in a PDB. The real issue though is that in
order to add support for dumping and writing them (which will be useful
for object files), we need a way to test them. And since there is no
support for reading and writing them to / from object files yet, making
PDB support them is the best way to both add support for the underlying
format and add support for tests at the same time. Later, when we go
to add support for reading / writing them from object files, we'll need
only minimal changes in the underlying read/write code.
llvm-svn: 305037
This is the same change for the YAML Output style applied to the
raw output style. Previously we would queue up all subsections
until every one had been read, and then output them in a pre-
determined order. This was because some subsections need to be
read first in order to properly dump later subsections. This
patch allows them to be dumped in the order they appear.
Differential Revision: https://reviews.llvm.org/D34015
llvm-svn: 305034
Apparently support for /debug:fastlink PDBs isn't part of the
DIA SDK (!), and it was causing llvm-pdbdump to crash because
we weren't checking for a null pointer return value. This
manifests when calling findChildren on the IDiaSymbol, and
it returns E_NOTIMPL.
llvm-svn: 304982
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
llvm-svn: 304844
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
While it's not entirely clear why a compiler or linker might
put this information into an object or PDB file, one has been
spotted in the wild which was causing llvm-pdbdump to crash.
This patch adds support for reading-writing these sections.
Since I don't know how to get one of the native tools to
generate this kind of debug info, the only test here is one
in which we feed YAML into the tool to produce a PDB and
then spit out YAML from the resulting PDB and make sure that
it matches.
llvm-svn: 304738
Previously MappedBlockStream owned its own BumpPtrAllocator that
it would allocate from when a read crossed a block boundary. This
way it could still return the user a contiguous buffer of the
requested size. However, It's not uncommon to open a stream, read
some stuff, close it, and then save the information for later.
After all, since the entire file is mapped into memory, the data
should always be available as long as the file is open.
Of course, the exception to this is when the data isn't *in* the
file, but rather in some buffer that we temporarily allocated to
present this contiguous view. And this buffer would get destroyed
as soon as the strema was closed.
The fix here is to force the user to specify the allocator, this
way it can provide an allocator that has whatever lifetime it
chooses.
Differential Revision: https://reviews.llvm.org/D33858
llvm-svn: 304623
Previously we would expect certain subsections to appear
in a certain order because some subsections would reference
other subsections, but in practice we need to support
arbitrary orderings since some object file and PDB file
producers generate them this way. This also paves the
way for supporting Yaml <-> Object File conversion of
CodeView, since Object Files typically have quite a
large number of subsections in their debug info.
Differential Revision: https://reviews.llvm.org/D33807
llvm-svn: 304588
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
This commit introduces a structure that holds all the flags that
control the pretty printing of dwarf output.
Patch by Spyridoula Gravani!
Differential Revision: https://reviews.llvm.org/D33749
llvm-svn: 304446
This is the beginning of an effort to move the codeview yaml
reader / writer into ObjectYAML so that it can be shared.
Currently the only consumer / producer of CodeView YAML is
llvm-pdbdump, but CodeView can exist outside of PDB files, and
indeed is put into object files and passed to the linker to
produce PDB files. Furthermore, there are subtle differences
in the types of records that show up in object file CodeView
vs PDB file CodeView, but they are otherwise 99% the same.
By having this code in ObjectYAML, we can have llvm-pdbdump
reuse this code, while teaching obj2yaml and yaml2obj to use
this syntax for dealing with object files that can contain
CodeView.
This patch only adds support for CodeView type information
to ObjectYAML. Subsequent patches will add support for
CodeView symbol information.
llvm-svn: 304248
This adds implementations for Symbols and FrameData, and renames
the existing codeview::StringTable class to conform to the
DebugSectionStringTable convention.
llvm-svn: 304222
With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304078
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304002
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303978
Merging two type streams is one of the most time consuming
parts of generating a PDB, and as such it needs to be as
fast as possible. The visitor abstractions used for interoperating
nicely with many different types of inputs and outputs have
been used widely and help greatly for testability and implementing
tools, but the abstractions build up and get in the way of
performance.
This patch removes all of the visitation stuff from the type
stream merger, essentially re-inventing the leaf / member switch
and loop, but at a very low level. This allows us many other
optimizations, such as not actually deserializing *any* records
(even member records which don't describe their own length), as
the operation of "figure out how long this record is" is somewhat
faster than "figure out how long this record *and* get all its
fields out". Furthermore, whereas before we had to deserialize,
re-write type indices, then re-serialize, now we don't have to
do any of those 3 steps. We just find out where the type indices
are and pull them directly out of the byte stream and re-write
them.
This is worth a 50-60% performance increase. On top of all other
optimizations that have been applied this week, I now get the
following numbers when linking lld.exe and lld.pdb
MSVC: 25.67s
Before This Patch: 18.59s
After This Patch: 8.92s
So this is a huge performance win.
Differential Revision: https://reviews.llvm.org/D33564
llvm-svn: 303935
Originally this was intended to be set up so that when linking
a PDB which refers to a type server, it would only visit the
PDB once, and on subsequent visitations it would just skip it
since all the records had already been added.
Due to some C++ scoping issues, this was not occurring and it
was revisiting the type server every time, which caused every
record to end up being thrown away on all subsequent visitations.
This doesn't affect the performance of linking clang-cl generated
object files because we don't use type servers, but when linking
object files and libraries generated with /Zi via MSVC, this means
only 1 object file has to be linked instead of N object files, so
the speedup is quite large.
llvm-svn: 303920
Previously, every time we wanted to serialize a field list record, we
would create a new copy of FieldListRecordBuilder, which would in turn
create a temporary instance of TypeSerializer, which itself had a
std::vector<> that was about 128K in size. So this 128K allocation was
happening every time. We can re-use the same instance over and over, we
just have to clear its internal hash table and seen records list between
each run. This saves us from the constant re-allocations.
This is worth an ~18.5% speed increase (3.75s -> 3.05s) in my tests.
Differential Revision: https://reviews.llvm.org/D33506
llvm-svn: 303919
Summary:
DbiStreamBuilder calculated the offset of the source file names inside
the file info substream as the size of the file info substream minus
the size of the file names. Since the file info substream is padded to
a multiple of 4 bytes, this caused the first file name to be aligned
on a 4-byte boundary. By contrast, DbiModuleList would read the file
names immediately after the file name offset table, without skipping
to the next 4-byte boundary. This change makes it so that the file
names are written to the location where DbiModuleList expects them,
and puts any necessary padding for the file info substream after the
file names instead of before it.
Reviewers: amccarth, rnk, zturner
Reviewed By: amccarth, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33475
llvm-svn: 303917
It was using the number of blocks of the entire PDB file as the number
of blocks of each stream that was created. This was only an issue in
the readLongestContiguousChunk function, which was never called prior.
This bug surfaced when I updated an algorithm to use this function and
the algorithm broke.
llvm-svn: 303916
A profile shows the majority of time doing type merging is spent
deserializing records from sequences of bytes into friendly C++ structures
that we can easily access members of in order to find the type indices to
re-write.
Records are prefixed with their length, however, and most records have
type indices that appear at fixed offsets in the record. For these
records, we can save some cycles by just looking at the right place in the
byte sequence and re-writing the value, then skipping the record in the
type stream. This saves us from the costly deserialization of examining
every field, including potentially null terminated strings which are the
slowest, even though it was unnecessary to begin with.
In addition, we apply another optimization. Previously, after
deserializing a record and re-writing its type indices, we would
unconditionally re-serialize it in order to compute the hash of the
re-written record. This would result in an alloc and memcpy for every
record. If no type indices were re-written, however, this was an
unnecessary allocation. In this patch re-writing is made two phase. The
first phase discovers the indices that need to be rewritten and their new
values. This information is passed through to the de-duplication code,
which only copies and re-writes type indices in the serialized byte
sequence if at least one type index is different.
Some records have type indices which only appear after variable length
strings, or which have lists of type indices, or various other situations
that can make it tricky to make this optimization. While I'm not giving up
on optimizing these cases as well, for now we can get the easy cases out
of the way and lay the groundwork for more complicated cases later.
This patch yields another 50% speedup on top of the already large speedups
submitted over the past 2 days. In two tests I have run, I went from 9
seconds to 3 seconds, and from 16 seconds to 8 seconds.
Differential Revision: https://reviews.llvm.org/D33480
llvm-svn: 303914
LazyRandomTypeCollection is designed for random access, and in
order to provide this it lazily indexes ranges of types. In the
case of types from an object file, there is no partial index
to build off of, so it has to index the full stream up front.
However, merging types only requires sequential access, and when
that is needed, this extra work is simply wasted. Changing the
algorithm to work on sequential arrays of types rather than
random access type collections eliminates this up front scan.
llvm-svn: 303707
When writing field list records, we would construct a temporary
type serializer that shared a bump ptr allocator with the rest
of the application, so anything allocated from here would live
forever. Furthermore, this temporary serializer had all the
properties of a full blown serializer including record hashing
and de-duplication.
These features are required when you're merging multiple type
streams into each other, because different streams may contain
identical records, but records from the same type stream will
never collide with each other. So all of this hashing was
unnecessary.
To solve this, two fixes are made:
1) The temporary serializer keeps its own bump ptr allocator
instead of sharing a global one. When it's finished, all of
its memory is freed.
2) Instead of using the same temporary serializer for the life
of an entire type stream, we use it only for the life of a single
field list record and delete it when the field list record is
completed. This way the hash table will not grow as other
records from the same type stream get inserted. Further improvements
could eliminate hashing entirely from this codepath.
This reduces the link time by 85% in my test, from 1 minute to 9
seconds.
llvm-svn: 303676
Summary:
First, StringMap uses llvm::HashString, which is only good for short
identifiers and really bad for large blobs of binary data like type
records. Moving to `DenseMap<StringRef, TypeIndex>` with some tricks for
memory allocation fixes that.
Unfortunately, that didn't buy very much performance. Profiling showed
that we spend a long time during DenseMap growth rehashing existing
entries. Also, in general, DenseMap is faster when the keys are small.
This change takes that to the logical conclusion by introducing a small
wrapper value type around a pointer to key data. The key data contains a
precomputed hash, the original record data (pointer and size), and the
type index, which is the "value" of our original map.
This reduces the time to produce llvm-as.exe and llvm-as.pdb from ~15s
on my machine to 3.5s, which is about a 4x improvement.
Reviewers: zturner, inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33428
llvm-svn: 303665
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
llvm-svn: 303532
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
We were using a BumpPtrAllocator to allocate stable storage for
a record, then trying to insert that into a hash table. If a
collision occurred, the bytes were never inserted and the
allocation was unnecessary. At the cost of an extra hash
computation, check first if it exists, and only if it does do
we allocate and insert.
llvm-svn: 303407
Apparently this was always broken, but previously we were more
graceful about it and we would print "unknown udt" if we couldn't
find the type index, whereas now we just segfault because we
assume it's valid. But this exposed a real bug, which is that
we weren't looking in the right place. So fix that, and also
fix this crash at the same time.
llvm-svn: 303397
Merging PDBs is a feature that will be used heavily by
the linker. The functionality already exists but does not
have deep test coverage because it's not easily exposed through
any tools. This patch aims to address that by adding the
ability to merge PDBs via llvm-pdbdump. It takes arbitrarily
many PDBs and outputs a single PDB.
Using this new functionality, a test is added for merging
type records. Future patches will add the ability to merge
symbol records, module information, etc.
llvm-svn: 303389
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
1) Until now I'd never seen a valid PDB where the DBI stream and
the PDB Stream disagreed on the "Age" field. Because of that,
we had code to assert that they matched. Recently though I was
given a PDB where they disagreed, so this assumption has proven
to be incorrect. Remove this check.
2) We were walking the entire list of hash values for types up front
and then throwing away the values. For large PDBs this was a
significant slow down. Remove this.
With this patch, I can dump the list of all compilands from a
1.5GB PDB file in just a few seconds.
llvm-svn: 303351
We do not need to store relocation width field.
Patch removes relative code, that simplifies implementation.
Differential revision: https://reviews.llvm.org/D33274
llvm-svn: 303335
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
llvm-svn: 303331
Summary:
llvm-pdbdump yaml2pdb used to fail with a misleading error
message ("An I/O error occurred on the file system") if no output file
was specified. This change adds an assert to PDBFileBuilder to check
that an output file name is specified, and makes llvm-pdbdump generate
an output file name based on the input file name if no output file
name is explicitly specified.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D33296
llvm-svn: 303299
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
llvm-svn: 303271
RelocAddrMap was a pair of <width, address>, where width is relocation size (4/8/x, x < 8),
and width field was never used in code.
Relocations proccessing loop had checks for width field. Does not look like DWARF parser
should do that. There is probably no much sense to validate relocations during proccessing
them in parser.
Patch removes relocation's width relative code from DWARFContext.
Differential revision: https://reviews.llvm.org/D33194
llvm-svn: 303251
Recommit of r303159 "[DWARF] - Use DWARFAddressRange struct instead of uint64_t pair for DWARFAddressRangesVector"
All places were shitched to use DWARFAddressRange now.
Suggested during review of D33184.
llvm-svn: 303163
I am working on a speedup of building .gdb_index in LLD and
noticed that relocations that are proccessed in DWARFContextInMemory often uses
the same symbol in a row. This patch introduces caching to reduce the relocations
proccessing time.
For benchmark,
I took debug LLC binary objects configured with -ggnu-pubnames and linked it using LLD.
Link time without --gdb-index is about 4,45s.
Link time with --gdb-index: a) Without patch: 19,16s b) With patch: 15,52s
That means time spent on --gdb-index in this configuration is
19,16s - 4,45s = 14,71s (without patch) vs 15,52s - 4,45s = 11,07s (with patch).
Differential revision: https://reviews.llvm.org/D31136
llvm-svn: 303051
This adds a visitor that is capable of accessing type
records randomly and caching intermediate results that it
learns about during partial linear scans. This yields
amortized O(1) access to a type stream even though type
streams cannot normally be indexed.
Differential Revision: https://reviews.llvm.org/D33009
llvm-svn: 302936
There is no other explanation about why this only started happening
now, even though it crashes on old code (supposedly reachable from
here).
The only common factor between the failing bots is that they use GCC
(4.9 and 5.3) to compile Clang, while the others use Clang 3.8, but the
failure is while building the tests, as an assertion, on Clang.
Commenting it out for now in hope the bots will go back green, but we
should keep looking for the real cause, and update bugzilla.
llvm-svn: 302520
Previously type visitation was done strictly sequentially, and
TypeIndexes were computed by incrementing the TypeIndex of the
last visited record. This works fine for situations like dumping,
but not when you want to visit types in random order. For example,
in a debug session someone might lookup a symbol by name, find that
it has TypeIndex 10,000 and then want to go straight to TypeIndex
10,000.
In order to make this work, the visitation framework needs a mode
where it can plumb TypeIndices through the callback pipeline. This
patch adds such a mode. In doing so, it is necessary to provide
an alternative implementation of TypeDatabase that supports random
access, so that is done as well.
Nothing actually uses these random access capabilities yet, but
this will be done in subsequent patches.
Differential Revision: https://reviews.llvm.org/D32928
llvm-svn: 302454
