This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
This was reported by the ASAN bot, and it turned out to be
a fairly fundamental problem with the design of VarStreamArray
and the way it passes context information to the extractor.
The fix was cumbersome, and I'm not entirely pleased with it,
so I plan to revisit this design in the future when I'm not
pressed to get the bots green again. For now, this fixes
the issue by storing the context information by value instead
of by reference, and introduces some impossibly-confusing
template magic to make things "work".
llvm-svn: 301999
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
In preparation for introducing writing capabilities for each of
these classes, I would like to adopt a Foo / FooRef naming
convention, where Foo indicates that the class can manipulate and
serialize Foos, and FooRef indicates that it is an immutable view of
an existing Foo. In other words, Foo is a writer and FooRef is a
reader. This patch names some existing readers to conform to the
FooRef convention, while offering no functional change.
llvm-svn: 301810
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
Previously parsing of these were all grouped together into a
single master class that could parse any type of debug info
fragment.
With writing forthcoming, the complexity of each individual
fragment is enough to warrant them having their own classes so
that reading and writing of each fragment type can be grouped
together, but isolated from the code for reading and writing
other fragment types.
In doing so, I found a place where parsing code was duplicated
for the FileChecksums fragment, across llvm-readobj and the
CodeView library, and one of the implementations had a bug.
Now that the codepaths are merged, the bug is resolved.
Differential Revision: https://reviews.llvm.org/D32547
llvm-svn: 301557
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
This assert is just trying to test that processing each record adds
exactly one entry to the index map. The assert logic was wrong when the
first record in the type stream was a field list.
I've simplified the code by moving the LF_FIELDLIST-specific logic into
the callback for that record type.
llvm-svn: 299035
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
Summary:
When dumping these records from an object file section, we should use
only one type database. However, when dumping from a PDB, we should use
two: one for the type stream and one for the IPI stream.
Certain type records that normally live in the .debug$T object file
section get moved over to the IPI stream of the PDB file and they get
new indices.
So far, I've noticed that the MSVC linker always moves these records
into IPI:
- LF_FUNC_ID
- LF_MFUNC_ID
- LF_STRING_ID
- LF_SUBSTR_LIST
- LF_BUILDINFO
- LF_UDT_MOD_SRC_LINE
These records have index fields that can point into TPI or IPI. In
particular, LF_SUBSTR_LIST and LF_BUILDINFO point to LF_STRING_ID
records to describe compilation command lines.
I've modified the dumper to have an optional pointer to the item DB, and
to do type name lookup of these fields in that DB. See printItemIndex.
The result is that our pdbdump-headers.test is more faithful to the PDB
contents and the output is less confusing.
Reviewers: ruiu
Subscribers: amccarth, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D31309
llvm-svn: 298649
Summary:
This removes the 'remapTypeIndices' method on every TypeRecord class. My
original idea was that this would be the beginning of some kind of
generic entry point that would enumerate all of the TypeIndices inside
of a TypeRecord, so that we could write generic graph algorithms for
them without duplicating the knowledge of which fields are type index
fields everywhere. This never happened, and nothing else uses this
method. I need to change the API to deal with merging into IPI streams,
so let's move it into the file that uses it first.
Reviewers: zturner, ruiu
Reviewed By: zturner, ruiu
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D31267
llvm-svn: 298564
They are structurally the same, but now we need to distinguish them
because one record lives in the IPI stream and the other lives in TPI.
llvm-svn: 298474
This was originally reported in pr32249, uncovered by PTVS-Studio.
There was no code coverage for this path because it was
difficult to construct odd-case PDB files that were not generated
by cl.
Now that we can write construct minimal PDB files from YAML,
it's easy to construct fragments that generate whatever we want.
In this patch I add a test that creates 2 type records. One
with a unique name, and one without. I verify that we can go
from PDB to Yaml with no errors. In a future patch I'd like
to add something like llvm-pdbdump raw -lookup-type that will
just dump one record and nothing else, which should make it
a bit cleaner to find this kind of thing.
llvm-svn: 298017
Previously we could round-trip type records from PDB -> Yaml ->
PDB, but for symbols we could only go from PDB -> Yaml. This
completes the round-tripping for symbols as well.
llvm-svn: 297625
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
Some PDBs or object files can contain references to other PDBs
where the real type information lives. When this happens,
all type indices in the original PDB are meaningless because
their records are not there.
With this patch we add the ability to pull type info from those
secondary PDBs.
Differential Revision: https://reviews.llvm.org/D29973
llvm-svn: 295382
Previously, mergeTypeStreams returns only true or false, so it was
impossible to know the reason if it failed. This patch changes the
function signature so that it returns an Error object.
Differential Revision: https://reviews.llvm.org/D29362
llvm-svn: 293820
This introduces the `analyze` subcommand. For now there is only
one option, to analyze hash collisions in the type streams. In
the future, however, we could add many more things here, such
as performing size analyses, compacting, and statistics about
the type of records etc.
llvm-svn: 293795
Previously the type dumper itself was passed around to a lot of different
places and manipulated in ways that were more appropriate on the type
database. For example, the entire TypeDumper was passed into the symbol
dumper, when all the symbol dumper wanted to do was lookup the name of a
TypeIndex so it could print it. That's what the TypeDatabase is for --
mapping type indices to names.
Another example is how if the user runs llvm-pdbdump with the option to
dump symbols but not types, we still have to visit all types so that we
can print minimal information about the type of a symbol, but just without
dumping full symbol records. The way we did this before is by hacking it
up so that we run everything through the type dumper with a null printer,
so that the output goes to /dev/null. But really, we don't need to dump
anything, all we want to do is build the type database. Since
TypeDatabaseVisitor now exists independently of TypeDumper, we can do
this. We just build a custom visitor callback pipeline that includes a
database visitor but not a dumper.
All the hackery around printers etc goes away. After this patch, we could
probably even delete the entire CVTypeDumper class since really all it is
at this point is a thin wrapper that hides the details of how to build a
useful visitation pipeline. It's not a priority though, so CVTypeDumper
remains for now.
After this patch we will be able to easily plug in a different style of
type dumper by only implementing the proper visitation methods to dump
one-line output and then sticking it on the pipeline.
Differential Revision: https://reviews.llvm.org/D28524
llvm-svn: 291724
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This creates a centralized class in which to store type records.
It stores types as an array of entries, which matches the
notion of a type stream being a topologically sorted DAG.
Logic to build up such a database was already being used in
CVTypeDumper, so CVTypeDumper is now updated to to read from
a TypeDatabase which is filled out by an earlier visitor in
the pipeline.
Differential Revision: https://reviews.llvm.org/D28486
llvm-svn: 291626
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
Previously support had been added for using CodeViewRecordIO
to read (deserialize) CodeView type records. This patch adds
support for writing those same records. With this patch,
reading and writing of CodeView type records finally uses a single
codepath.
Differential Revision: https://reviews.llvm.org/D26253
llvm-svn: 286304
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
Summary:
Fixes PR28281.
MSVC lists indirect virtual base classes in the field list of a class,
using LF_IVBCLASS records. This change makes LLVM emit such records
when processing DW_TAG_inheritance tags with the DIFlagVirtual and
(newly introduced) DIFlagIndirect tags.
Reviewers: rnk, ruiu, zturner
Differential Revision: https://reviews.llvm.org/D25578
llvm-svn: 285130
This was all using ArrayRef<>s before which presents a problem
when you want to serialize to or deserialize from an actual
PDB stream. An ArrayRef<> is really just a special case of
what can be handled with StreamInterface though (e.g. by using
a ByteStream), so changing this to use StreamInterface allows
us to plug in a PDB stream and get all the record serialization
and deserialization for free on a MappedBlockStream.
Subsequent patches will try to remove TypeTableBuilder and
TypeRecordBuilder in favor of class that operate on
Streams as well, which should allow us to completely merge
the reading and writing codepaths for both types and symbols.
Differential Revision: https://reviews.llvm.org/D25831
llvm-svn: 284762
