Given 'typename T typename U', we would correctly diagnose the missing
comma, but incorrectly disambiguate the first parameter as being a
non-type parameter and complain that the 'T' is not a qualified-id.
See also gcc.gnu.org/PR86998.
llvm-svn: 340074
information is then discarded with a warning to the user that we don't
support it.
This patch gets us one step closer by getting the info down into the
AST in most cases.
Reviewed by: rsmith
Differential Revision: https://reviews.llvm.org/D49865
llvm-svn: 339693
Recommit of r335084 after revert in r335516.
... instead of prepending it at the beginning (the original behavior
since implemented in r122535 2010-12-23). This builds up an
AttributeList in the the order in which the attributes appear in the
source.
The reverse order caused nodes for attributes in the AST (e.g. LoopHint)
to be in the reverse order, and therefore printed in the wrong order in
-ast-dump. Some TODO comments mention this. The order was explicitly
reversed for enable_if attribute overload resolution and name mangling,
which is not necessary anymore with this patch.
The change unfortunately has some secondary effect, especially on
diagnostic output. In the simplest cases, the CHECK lines or expected
diagnostic were changed to the the new output. If the kind of
error/warning changed, the attributes' order was changed instead.
This unfortunately causes some 'previous occurrence here' hints to be
textually after the main marker. This typically happens when attributes
are merged, but are incompatible to each other. Interchanging the role
of the the main and note SourceLocation will also cause the case where
two different declaration's attributes (in contrast to multiple
attributes of the same declaration) are merged to be reverse. There is
no easy fix because sometimes previous attributes are merged into a new
declaration's attribute list, sometimes new attributes are added to a
previous declaration's attribute list. Since 'previous occurrence here'
pointing to locations after the main marker is not rare, I left the
markers as-is; it is only relevant when the attributes are declared in
the same declaration anyway.
Differential Revision: https://reviews.llvm.org/D48100
llvm-svn: 338800
This adds support for the unroll_and_jam pragma, to go with the recently
added unroll and jam pass. The name of the pragma is the same as is used
in the Intel compiler, and most of the code works the same as for unroll.
#pragma clang loop unroll_and_jam has been separated into a different
patch. This part adds #pragma unroll_and_jam with an optional count, and
#pragma no_unroll_and_jam to disable the transform.
Differential Revision: https://reviews.llvm.org/D47267
llvm-svn: 338566
Summary:
This patch allows the parsing of a postfix expression involving a fold expression, which is legal as a fold-expression is a primary-expression.
See also https://llvm.org/pr38282
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D49848
llvm-svn: 338170
Clang already has L__FUNCTION__ as a workaround for dealing with
pre-processor code that expects to be able to do L##__FUNCTION__ in a
macro. This patch implements the same logic for __FUNCSIG__.
Fixes PR38295.
llvm-svn: 338083
Check each case value in turn while parsing it, performing the
conversion to the switch type within the context of the expression
itself. This will become necessary in order to properly handle cleanups
for temporaries created as part of the case label (in an upcoming
patch). For now it's just good hygiene.
This necessitates moving the checking for the switch condition itself to
earlier, so that the destination type is available when checking the
case labels.
As a nice side-effect, we get slightly improved diagnostic quality and
error recovery by separating the case expression checking from the case
statement checking and from tracking whether there are discarded case
labels.
llvm-svn: 338056
As documented here: https://software.intel.com/en-us/node/682969 and
https://software.intel.com/en-us/node/523346. cpu_dispatch multiversioning
is an ICC feature that provides for function multiversioning.
This feature is implemented with two attributes: First, cpu_specific,
which specifies the individual function versions. Second, cpu_dispatch,
which specifies the location of the resolver function and the list of
resolvable functions.
This is valuable since it provides a mechanism where the resolver's TU
can be specified in one location, and the individual implementions
each in their own translation units.
The goal of this patch is to be source-compatible with ICC, so this
implementation diverges from the ICC implementation in a few ways:
1- Linux x86/64 only: This implementation uses ifuncs in order to
properly dispatch functions. This is is a valuable performance benefit
over the ICC implementation. A future patch will be provided to enable
this feature on Windows, but it will obviously more closely fit ICC's
implementation.
2- CPU Identification functions: ICC uses a set of custom functions to identify
the feature list of the host processor. This patch uses the cpu_supports
functionality in order to better align with 'target' multiversioning.
1- cpu_dispatch function def/decl: ICC's cpu_dispatch requires that the function
marked cpu_dispatch be an empty definition. This patch supports that as well,
however declarations are also permitted, since the linker will solve the
issue of multiple emissions.
Differential Revision: https://reviews.llvm.org/D47474
llvm-svn: 337552
This diff adds a fixit to suggest removing unused lambda captures
in the appropriate diagnostic.
Patch by Andrew Comminos!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D48845
llvm-svn: 337148
Basically, "AttributeList" loses all list-like mechanisms, ParsedAttributes is
switched to use a TinyPtrVector (and a ParsedAttributesView is created to
have a non-allocating attributes list). DeclaratorChunk gets the later kind,
Declarator/DeclSpec keep ParsedAttributes.
Iterators are added to the ParsedAttribute types so that for-loops work.
llvm-svn: 336945
For some of the clauses the closing location erroneously points to the
beginning of the next clause rather than on the location of the closing
bracket of the clause.
llvm-svn: 336460
Implement support for MS-style PCH through headers.
This enables support for /Yc and /Yu where the through header is either
on the command line or included in the source. It replaces the current
support the requires the header also be specified with /FI.
This change adds a -cc1 option -pch-through-header that is used to either
start or stop compilation during PCH create or use.
When creating a PCH, the compilation ends after compilation of the through
header.
When using a PCH, tokens are skipped until after the through header is seen.
Patch By: mikerice
Differential Revision: https://reviews.llvm.org/D46652
llvm-svn: 336379
Existing code always allocates for on the declarator's attribute pool,
but sometimes adds it to the declspec. This patch ensures that the
correct pool is used.
Discovered while testing: https://reviews.llvm.org/D48788
llvm-svn: 336225
While clang allows declarations in for loop init statements in c89 and
gnu89, gcc does not. So, we should probably warn if users care about gcc
compatibility.
Differential Revision: https://reviews.llvm.org/D47840
llvm-svn: 335927
Using @import in framework headers inhibit the use of such headers
when not using modules, this is specially bad for headers that end
up in the SDK (or any other system framework). Add a warning to give
users some indication that this is discouraged.
rdar://problem/39192894
llvm-svn: 335780
binary operator.
Factor out the checking for a comma within potential angle brackets and
also call it from contexts where we parse a comma-separated list of
arguments or initializers.
llvm-svn: 335699
We track when we see a name-shaped expression followed by a '<' token
and parse the '<' as a comparison. Then:
* if we see a token sequence that cannot possibly be an expression but
can be a template argument (in particular, a type-id) that follows
either a ',' or the '<', diagnose that the '<' was supposed to start
a template argument list, and
* if we see '>()', diagnose that the '<' was supposed to start a
template argument list.
This only changes the diagnostic for error cases, and in practice
appears to catch the most common cases where a missing 'template'
keyword leads to parse errors within a template.
Differential Revision: https://reviews.llvm.org/D48571
llvm-svn: 335687
members of dependent contexts.
This permits cases where the names before and after the '::' in a
dependent inherited constructor using-declaration do not match, but
where we can nonetheless tell when parsing the template that a
constructor is being named. Under (open) core language DR 2070, such
cases will probably be ill-formed, but r335182 does not quite give
that result and didn't intend to change this, so restore the old
behavior for now.
llvm-svn: 335381
Diagnose the name of the class being shadowed by using declarations, and
improve the diagnostics for the case where the name of the class is
shadowed by a non-static data member in a class with constructors. In
the latter case, we now always give the "member with the same name as
its class" diagnostic regardless of the relative order of the member and
the constructor, rather than giving an inscrutible diagnostic if the
constructor appears second.
llvm-svn: 335182
... instead of prepending it at the beginning (the original behavior
since implemented in r122535 2010-12-23). This builds up an
AttributeList in the the order in which the attributes appear in the
source.
The reverse order caused nodes for attributes in the AST (e.g. LoopHint)
to be in the reverse, and therefore printed in the wrong order by
-ast-dump. Some TODO comments mention this. The order was explicitly
reversed for enable_if attribute overload resolution and name mangling,
which is not necessary anymore with this patch.
The change unfortunately has some secondary effects, especially for
diagnostic output. In the simplest cases, the CHECK lines or expected
diagnostic were changed to the the new output. If the kind of
error/warning changed, the attribute's order was changed instead.
It also causes some 'previous occurrence here' hints to be textually
after the main marker. This typically happens when attributes are
merged, but are incompatible. Interchanging the role of the the main
and note SourceLocation will also cause the case where two different
declaration's attributes (in contrast to multiple attributes of the
same declaration) are merged to be reversed. There is no easy fix
because sometimes previous attributes are merged into a new
declaration's attribute list, sometimes new attributes are added to a
previous declaration's attribute list. Since 'previous occurrence here'
pointing to locations after the main marker is not rare, I left the
markers as-is; it is only relevant when the attributes are declared in
the same declaration anyway, which often is on the same line.
Differential Revision: https://reviews.llvm.org/D48100
llvm-svn: 335084
This diff includes changes for the remaining _Fract and _Sat fixed point types.
```
signed short _Fract s_short_fract;
signed _Fract s_fract;
signed long _Fract s_long_fract;
unsigned short _Fract u_short_fract;
unsigned _Fract u_fract;
unsigned long _Fract u_long_fract;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
short _Fract short_fract;
_Fract fract;
long _Fract long_fract;
// Saturated fixed point types
_Sat signed short _Accum sat_s_short_accum;
_Sat signed _Accum sat_s_accum;
_Sat signed long _Accum sat_s_long_accum;
_Sat unsigned short _Accum sat_u_short_accum;
_Sat unsigned _Accum sat_u_accum;
_Sat unsigned long _Accum sat_u_long_accum;
_Sat signed short _Fract sat_s_short_fract;
_Sat signed _Fract sat_s_fract;
_Sat signed long _Fract sat_s_long_fract;
_Sat unsigned short _Fract sat_u_short_fract;
_Sat unsigned _Fract sat_u_fract;
_Sat unsigned long _Fract sat_u_long_fract;
// Aliased saturated fixed point types
_Sat short _Accum sat_short_accum;
_Sat _Accum sat_accum;
_Sat long _Accum sat_long_accum;
_Sat short _Fract sat_short_fract;
_Sat _Fract sat_fract;
_Sat long _Fract sat_long_fract;
```
This diff only allows for declaration of these fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches.
Differential Revision: https://reviews.llvm.org/D46911
llvm-svn: 334718
This reapplies r334224 and adds explicit triples to some tests to fix
them on Windows (where otherwise they would have run with the default
windows-msvc triple, which I'm changing the behavior for).
Original commit message:
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Differential Revision: https://reviews.llvm.org/D47564
llvm-svn: 334251
This reverts commit r334224.
This is causing buildbot failures on Windows, presumably because some
tests don't specify a triple. I'll test this on Windows locally and
recommit with the tests fixed.
llvm-svn: 334240
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Differential Revision: https://reviews.llvm.org/D47564
llvm-svn: 334224
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent _Fract types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Fixed the test that was failing by not checking for dso_local on some
targets.
Differential Revision: https://reviews.llvm.org/D46084
llvm-svn: 333923
```
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
```
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent `_Fract` types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Differential Revision: https://reviews.llvm.org/D46084
llvm-svn: 333814
Currently getting such completions requires source correction, reparsing
and calling completion again. And if it shows no results and rollback is
required then it costs one more reparse.
With this change it's possible to get all results which can be later
filtered to split changes which require correction.
Differential Revision: https://reviews.llvm.org/D41537
llvm-svn: 333272
E. g. use "10.11" instead of "10_11".
We are maintaining backward compatibility by parsing underscore-delimited version tuples but no longer keep track of the separator and using dot format for output.
Differential Revision: https://reviews.llvm.org/D46747
rdar://problem/39845032
llvm-svn: 332598
For 'x::template y', consistently give a "no member named 'y' in 'x'"
diagnostic if there is no such member, and give a 'template keyword not
followed by a template' name error if there is such a member but it's not a
template. In the latter case, add a note pointing at the non-template.
Don't suggest inserting a 'template' keyword in 'X::Y<' if X is dependent
if the lookup of X::Y was actually not a dependent lookup and found only
non-templates.
llvm-svn: 332076
Restrict the following keywords in the OpenCL C++ language mode,
according to Sections 2.2 & 2.9 of the OpenCL C++ 1.0 Specification.
- dynamic_cast
- typeid
- register (already restricted in OpenCL C, update the diagnostic)
- thread_local
- exceptions (try/catch/throw)
- access qualifiers read_only, write_only, read_write
Support the `__global`, `__local`, `__constant`, `__private`, and
`__generic` keywords in OpenCL C++. Leave the unprefixed address
space qualifiers such as global available, i.e., do not mark them as
reserved keywords in OpenCL C++. libclcxx provides explicit address
space pointer classes such as `global_ptr` and `global<T>` that are
implemented using the `__`-prefixed qualifiers.
Differential Revision: https://reviews.llvm.org/D46022
llvm-svn: 331874
This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
Generate a printable OpenCL language version number in a single place
and select between the OpenCL C or OpenCL C++ version accordingly.
Differential Revision: https://reviews.llvm.org/D46382
llvm-svn: 331766
FunctionProtoType.
We previously re-evaluated the expression each time we wanted to know whether
the type is noexcept or not. We now evaluate the expression exactly once.
This is not quite "no functional change": it fixes a crasher bug during AST
deserialization where we would try to evaluate the noexcept specification in a
situation where we have not deserialized sufficient portions of the AST to
permit such evaluation.
llvm-svn: 331428
This is not yet part of any C++ working draft, and so is controlled by the flag
-fchar8_t rather than a -std= flag. (The GCC implementation is controlled by a
flag with the same name.)
This implementation is experimental, and will be removed or revised
substantially to match the proposal as it makes its way through the C++
committee.
llvm-svn: 331244
When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
template arguments.
This fixes some cases where we'd incorrectly accept "A::template B" when B is a
kind of template that requires template arguments (in particular, a variable
template or a concept).
llvm-svn: 331013
Avoiding
error: no matching function for call to 'makeArrayRef'
at
../tools/clang/lib/Parse/ParseTemplate.cpp:373:17
By using a local C array as input to makeArrayRef.
Not sure if this is the best solution, but it makes the code
compile again.
llvm-svn: 330802
