As discussed on D55511, this caused an issue if the inner node deletes a node that the outer node depends upon. As it doesn't affect any lit-tests and I've only been able to expose this with the D55511 change I'm committing this now.
llvm-svn: 348781
This should really be generalized to allow increment and/or
we should replace it by using ISD::matchUnaryPredicate().
See D55515 for context.
llvm-svn: 348776
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, for the Exynos processors.
Differential revision: https://reviews.llvm.org/D55345
llvm-svn: 348774
This commit changes which l1 flush instruction is used for AMDPAL and
MESA3d workloads to flush the entire l1 cache instead of just the
volatile lines.
Differential Revision: https://reviews.llvm.org/D55367
llvm-svn: 348771
Refactor the scheduling predicates based on `MCInstPredicate`. Augment the
number of helper predicates used by processor specific predicates.
Differential revision: https://reviews.llvm.org/D55375
llvm-svn: 348768
Record the stack protector index in MachineFrameInfo when translating
Intrinsic::stackprotector similarly as is done by SelectionDAG when
processing the same intrinsic.
Setting this index allows the Prologue/Epilogue Insertion to recognize
that the stack protection is enabled. The pass can then make sure that
the stack protector comes before local variables on the stack and
assigns potentially vulnerable objects first so they are close to the
stack protector slot.
Differential Revision: https://reviews.llvm.org/D55418
llvm-svn: 348761
When replacing jal with jalr, also emit '.reloc R_MIPS_JALR' (R_MICROMIPS_JALR
for micromips). The linker might then be able to turn jalr into a direct
call.
Add '-mips-jalr-reloc' to enable/disable this feature (default is true).
Differential revision: https://reviews.llvm.org/D55292
llvm-svn: 348760
This triggers an assert when combining concat_vectors of a bitcast of
merge_values.
With asserts disabled, it fails to select:
fatal error: error in backend: Cannot select: 0x7ff19d000e90: i32 = any_extend 0x7ff19d000ae8
0x7ff19d000ae8: f64,ch = CopyFromReg 0x7ff19d000c20:1, Register:f64 %1
0x7ff19d000b50: f64 = Register %1
In function: d
Differential Revision: https://reviews.llvm.org/D55507
llvm-svn: 348759
A new pass to manage the Mode register.
Currently this just manages the floating point double precision
rounding requirements, but is intended to be easily extended to
encompass all Mode register settings.
The immediate motivation comes from the requirement to use the
round-to-zero rounding mode for the 16 bit interpolation
instructions, where the rounding mode setting is shared between
16 and 64 bit operations.
llvm-svn: 348754
Currently, dbg.value's of "nullptr" are dropped when entering a SelectionDAG --
apparently just because of an oversight when recognising Values that are
constant (see PR39787). This patch adds ConstantPointerNull to the list of
constants that can be turned into DBG_VALUEs.
The matter of what bit-value a null pointer constant in LLVM has was raised
in this mailing list thread:
http://lists.llvm.org/pipermail/llvm-dev/2018-December/128234.html
Where it transpires LLVM relies on (IR) null pointers being zero valued,
thus I've baked this assumption into the patch.
Differential Revision: https://reviews.llvm.org/D55227
llvm-svn: 348753
This is a fix for PR39896, where dbg.value's of SDNodes that have been
optimised out do not lead to "DBG_VALUE undef" instructions being created.
Such undef instructions are necessary to terminate earlier variable
ranges, otherwise variable values leak past the point where they're valid.
The "invalidated" flag of SDDbgValue is currently being abused to mean two
things:
* The corresponding SDNode is now invalid
* This SDDbgValue should not be emitted
Of which there are several legitimate combinations of meaning:
* The SDNode has been invalidated and we should emit "DBG_VALUE undef"
* The SDNode has been invalidated but the debug data was salvaged, don't
emit anything for this SDDbgValue
* This SDDbgValue has been emitted
This patch introduces distinct "Emitted" and "Invalidated" fields to the
SDDbgValue class, updates users accordingly, and generates "undef"
DBG_VALUEs for invalidated records. Awkwardly, there are circumstances
where we emit SDDbgValue's twice, specifically DebugInfo/X86/dbg-addr-dse.ll
which I've preserved.
Differential Revision: https://reviews.llvm.org/D55372
llvm-svn: 348751
Fixes https://bugs.llvm.org/show_bug.cgi?id=39926.
The size of the first copy was computed as
std::abs(std::abs(LdDisp2) - std::abs(LdDisp1)), which results in
skipped bytes if the signs of LdDisp2 and LdDisp1 differ. As far as
I can see, this should just be LdDisp2 - LdDisp1. The case where
LdDisp1 > LdDisp2 is already handled in the code above, in which case
LdDisp2 is set to LdDisp1 and this subtraction will evaluate to
Size1 = 0, which is the correct value to skip an overlapping copy.
Differential Revision: https://reviews.llvm.org/D55485
llvm-svn: 348750
Both intrinsics do the exact same thing so we really only need one.
Earlier in the 8.0 cycle we changed the signature of this intrinsic without renaming it. But it looks difficult to get the autoupgrade code to allow me to merge the intrinsics and change the signature at the same time. So I've renamed the intrinsic slightly for the new merged intrinsic. I'm skipping autoupgrading from the previous new to 8.0 signature. I've also renamed the subborrow for consistency.
llvm-svn: 348737
Since TBEHandler doesn't maintain state or otherwise have any need to be
a class right now, the read and write functions have been moved out and
turned into standalone functions. Additionally, the TBE read function
has been updated to return an Expected value for better error handling.
Tests have been updated to reflect these changes.
Differential Revision: https://reviews.llvm.org/D55450
llvm-svn: 348735
Summary:
`llvm::AttributeList` and `llvm::AttributeSet` are immutable, and so methods
defined on these classes, such as `addAttribute`, return a new immutable
object with the attribute added. In https://reviews.llvm.org/D55217 I attempted
to annotate methods such as `addAttribute` with `LLVM_NODISCARD`, since
calling these methods has no side-effects, and so ignoring the result
that is returned is almost certainly a programmer error.
However, committing the change resulted in new warnings in the AMDGPU target.
The AMDGPU simplify libcalls pass added in https://reviews.llvm.org/D36436
attempts to add the readonly and nounwind attributes to simplified
library functions, but instead calls the `addAttribute` methods and
ignores the result.
Modify the simplify libcalls pass to actually add the nounwind and
readonly attributes. Also update the simplify libcalls test to assert
that these attributes are actually being set.
Reviewers: rampitec, vpykhtin, rnk
Reviewed By: rampitec
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D55435
llvm-svn: 348732
Someday we'd like to remove old autoupgrade code so it helps to annotate how long its been there so we don't have to go digging through commit history.
llvm-svn: 348728
Previously we had to take the carry in and add -1 to it to set the carry flag so we could use it with ADC/SBB. But if we know its 0 then we don't need to bother.
This should go a long way towards fixing PR24545.
llvm-svn: 348727
The dependency was added in r213995 in response to r213986 which did make
X86/Utils depend on IR, but r256680 later removed that dependency again.
llvm-svn: 348724
The existing code tries to handle an undef operand while transforming an add to an LEA,
but it's incomplete because we will crash on the i16 test with the debug output shown below.
It's better to just give up instead. Really, GlobalIsel should have folded these before we
could get into trouble.
# Machine code for function add_undef_i16: NoPHIs, TracksLiveness, Legalized, RegBankSelected, Selected
bb.0 (%ir-block.0):
liveins: $edi
%1:gr32 = COPY killed $edi
%0:gr16 = COPY %1.sub_16bit:gr32
%5:gr64_nosp = IMPLICIT_DEF
%5.sub_16bit:gr64_nosp = COPY %0:gr16
%6:gr64_nosp = IMPLICIT_DEF
%6.sub_16bit:gr64_nosp = COPY %2:gr16
%4:gr32 = LEA64_32r killed %5:gr64_nosp, 1, killed %6:gr64_nosp, 0, $noreg
%3:gr16 = COPY killed %4.sub_16bit:gr32
$ax = COPY killed %3:gr16
RET 0, implicit killed $ax
# End machine code for function add_undef_i16.
*** Bad machine code: Reading virtual register without a def ***
- function: add_undef_i16
- basic block: %bb.0 (0x7fe6cd83d940)
- instruction: %6.sub_16bit:gr64_nosp = COPY %2:gr16
- operand 1: %2:gr16
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D54710
llvm-svn: 348722
Extension to rL348617, turns out llvm-exegesis doesn't need to match the perf counter name against a scheduler model resource name - so I've added a few more counters that I could find in the libpfm4 source code (and fix a typo in the knl/knm retired_uops counter - which uses 'all' instead of 'any').
llvm-svn: 348721
PE/COFF sections can have section names truncated to 8 chars, in order to
have the name available at runtime. (The string table, where long untruncated
names are stored, isn't loaded at runtime.)
This allows various llvm tools to dump the .eh_frame section from such
executables.
Patch by Peiyuan Song!
Differential Revision: https://reviews.llvm.org/D55407
llvm-svn: 348708
This is effectively re-committing the changes from:
rL347917 (D54640)
rL348195 (D55126)
...which were effectively reverted here:
rL348604
...because the code had a bug that could induce infinite looping
or eventual out-of-memory compilation.
The bug was that this code did not guard against transforming
opaque constants. More details are in the post-commit mailing
list thread for r347917. A reduced test for that is included
in the x86 bool-math.ll file. (I wasn't able to reduce a PPC
backend test for this, but it was almost the same pattern.)
Original commit message for r347917:
The motivating case for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=32023
and the corresponding rot16.ll regression tests.
Because x86 scalar shift amounts are i8 values, we can end up with trunc-binop-trunc
sequences that don't get folded in IR.
As the TODO comments suggest, there will be regressions if we extend this (for x86,
we mostly seem to be missing LEA opportunities, but there are likely vector folds
missing too). I think those should be considered existing bugs because this is the
same transform that we do as an IR canonicalization in instcombine. We just need
more tests to make those visible independent of this patch.
llvm-svn: 348706
Summary:
WasmSignature used to use its `WasmSignature` member variable only for
function types, but now it also can be used for events as well.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55247
llvm-svn: 348702
These nodes should have two results. A real VT and a Glue. But this code would have returned Undef which would only be a single result. But we're in the single result version of getNode so these opcodes should never be seen by this function anyway.
llvm-svn: 348670
We were still using the rounded down offset and alignment even though
they aren't handled because you can't trivially bitcast the loaded
value.
llvm-svn: 348658
`Saver` is a StringSaver, which has a few overloads of `save` that all
ultimately just call `StringRef save(StringRef)`. Just take a StringRef
here instead of building up a std::string to convert it to a StringRef.
llvm-svn: 348650
Summary:
- LLVM clang-format style doesn't allow one-line ifs.
- LLVM clang-tidy style says method names should start with a lowercase
letter. But currently WebAssemblyAsmParser's parent class
MCTargetAsmParser is mixing lowercase and uppercase method names
itself so overridden methods cannot be renamed now.
- Changed else ifs after returns to ifs.
- Added some newlines for readability.
Reviewers: aardappel, sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55350
llvm-svn: 348648
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
For the implementation, I'm reusing a bit of code for a similar existing
optimization (direct memcpy of undef). I've also added memset support to
MemDepAnalysis GetLocation -- Instead, getPointerDependencyFrom could be
used, but it seems to make more sense to add this to GetLocation and thus
make the computation cachable.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 348645
The splitting pass uses its 'unlikelyExecuted' predicate to statically
decide which blocks are cold.
- Do not treat noreturn calls as if they are cold unless they are actually
marked cold. This is motivated by functions like exit() and longjmp(), which
are not beneficial to outline.
- Do not treat inline asm as an outlining barrier. In practice asm("") is
frequently used to inhibit basic block merging; enabling outlining in this case
results in substantial memory savings.
- Treat invokes of cold functions as cold.
As a drive-by, remove the 'exceptionHandlingFunctions' predicate, because it's
no longer needed. The pass can identify & outline blocks dominated by EH pads,
so there's no need to special-case __cxa_begin_catch etc.
Differential Revision: https://reviews.llvm.org/D54244
llvm-svn: 348640
Algorithm: Identify maximal cold regions and put them in a worklist. If
a candidate region overlaps with another, discard it. While the worklist
is full, remove a single-entry sub-region from the worklist and attempt
to outline it. By the non-overlap property, this should not invalidate
parts of the domtree pertaining to other outlining regions.
Testing: LNT results on X86 are clean. With test-suite + externals, llvm
outlines 134KB pre-patch, and 352KB post-patch (+ ~2.6x). The file
483.xalancbmk/src/Constants.cpp stands out as an extreme case where llvm
outlines over 100 times in some functions (mostly EH paths). There was
not a significant performance impact pre vs. post-patch.
Differential Revision: https://reviews.llvm.org/D53887
llvm-svn: 348639
Previously we would create an lldb::Function object for each function
parsed, but we would not add these to the clang AST. This is a first
step towards getting local variable support working, as we first need an
AST decl so that when we create local variable entries, they have the
proper DeclContext.
Differential Revision: https://reviews.llvm.org/D55384
llvm-svn: 348631
To make X86CondBrFoldingPass can be run with --run-pass option, this can test one wrong assertion on analyzeCompare function for SUB32ri when its operand is not imm
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D55412
llvm-svn: 348620
This patch attempts to improve pfm perf counter coverage for all the x86 CPUs that libpfm4 supports.
Intel/AMD CPU families tend to share names for cycle/uops counters so even if they don't have a scheduler model yet they can at least use the default values (checked against the libpfm4 source code).
The remaining CPUs (where their port/pipe resource counters are known) I've tried to add to the existing model mappings.
These are untested but don't represent a regression to current llvm-exegesis behaviour for these CPUs.
Differential Revision: https://reviews.llvm.org/D55432
llvm-svn: 348617
As discussed in the post-commit thread of r347917, this
transform is fighting with an existing transform causing
an infinite loop or out-of-memory, so this is effectively
reverting r347917 and its follow-up r348195 while we
investigate the bug.
llvm-svn: 348604
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
Unlike the previous iteration of this patch, getDemandedBits() can now
again be called on arbirary (sized) instructions, even if they don't
have integer or vector of integer type. (For vector types the size of the
returned mask will now be the scalar size in bits though.)
The added LoopVectorize test case shows a case which triggered an
assertion failure with the previous attempt, because getDemandedBits()
was called on a pointer-typed instruction.
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348602
This change attempts to shrink scalar AND, OR and XOR instructions which take an immediate that isn't inlineable.
It performs:
AND s0, s0, ~(1 << n) -> BITSET0 s0, n
OR s0, s0, (1 << n) -> BITSET1 s0, n
AND s0, s1, x -> ANDN2 s0, s1, ~x
OR s0, s1, x -> ORN2 s0, s1, ~x
XOR s0, s1, x -> XNOR s0, s1, ~x
In particular, this catches setting and clearing the sign bit for fabs (and x, 0x7ffffffff -> bitset0 x, 31 and or x, 0x80000000 -> bitset1 x, 31).
llvm-svn: 348601
This patch introduces a new instinsic `@llvm.experimental.widenable_condition`
that allows explicit representation for guards. It is an alternative to using
`@llvm.experimental.guard` intrinsic that does not contain implicit control flow.
We keep finding places where `@llvm.experimental.guard` is not supported or
treated too conservatively, and there are 2 reasons to that:
- `@llvm.experimental.guard` has memory write side effect to model implicit control flow,
and this sometimes confuses passes and analyzes that work with memory;
- Not all passes and analysis are aware of the semantics of guards. These passes treat them
as regular throwing call and have no idea that the condition of guard may be used to prove
something. One well-known place which had caused us troubles in the past is explicit loop
iteration count calculation in SCEV. Another example is new loop unswitching which is not
aware of guards. Whenever a new pass appears, we potentially have this problem there.
Rather than go and fix all these places (and commit to keep track of them and add support
in future), it seems more reasonable to leverage the existing optimizer's logic as much as possible.
The only significant difference between guards and regular explicit branches is that guard's condition
can be widened. It means that a guard contains (explicitly or implicitly) a `deopt` block successor,
and it is always legal to go there no matter what the guard condition is. The other successor is
a guarded block, and it is only legal to go there if the condition is true.
This patch introduces a new explicit form of guards alternative to `@llvm.experimental.guard`
intrinsic. Now a widenable guard can be represented in the CFG explicitly like this:
%widenable_condition = call i1 @llvm.experimental.widenable.condition()
%new_condition = and i1 %cond, %widenable_condition
br i1 %new_condition, label %guarded, label %deopt
guarded:
; Guarded instructions
deopt:
call type @llvm.experimental.deoptimize(<args...>) [ "deopt"(<deopt_args...>) ]
The new intrinsic `@llvm.experimental.widenable.condition` has semantics of an
`undef`, but the intrinsic prevents the optimizer from folding it early. This form
should exploit all optimization boons provided to `br` instuction, and it still can be
widened by replacing the result of `@llvm.experimental.widenable.condition()`
with `and` with any arbitrary boolean value (as long as the branch that is taken when
it is `false` has a deopt and has no side-effects).
For more motivation, please check llvm-dev discussion "[llvm-dev] Giving up using
implicit control flow in guards".
This patch introduces this new intrinsic with respective LangRef changes and a pass
that converts old-style guards (expressed as intrinsics) into the new form.
The naming discussion is still ungoing. Merging this to unblock further items. We can
later change the name of this intrinsic.
Reviewed By: reames, fedor.sergeev, sanjoy
Differential Revision: https://reviews.llvm.org/D51207
llvm-svn: 348593
When we had dynamic call frames (i.e. sp adjustment around each call) we
were including that adjustment into offsets calculated based on r6, even
though it's only sp that changes. This led to incorrect stack slot
accesses.
llvm-svn: 348591
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
This was approved previously https://reviews.llvm.org/D55115 (r348215)
but when committed it caused failures on the sanitizer buildbots when
building llvm with clang (containing this patch). This is now fixed
because I've added a check to see if getting the parent module returns
null if it does then set the alignment to 0.
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348571
The current algorithm that collects live/dead/inloop blocks relies on some invariants
related to RPO and PO traversals. In particular, the important fact it requires is that
the only loop's latch is the first block in PO traversal. It also relies on fact that during
RPO we visit all prececessors of a block before we visit this block (backedges ignored).
If a loop has irreducible non-loop cycle inside, both these assumptions may break.
This patch adds detection for this situation and prohibits the terminator folding
for loops with irreducible CFG.
We can in theory support this later, for this some algorithmic changes are needed.
Besides, irreducible CFG is not a frequent situation and we can just don't bother.
Thanks @uabelho for finding this!
Differential Revision: https://reviews.llvm.org/D55357
Reviewed By: skatkov
llvm-svn: 348567
Fix assert about using an undefined physical register in machine instruction verify pass.
The reason is that register flag undef is missing when doing transformation from If Conversion Pass.
```
Bad machine code: Using an undefined physical register
- function: func_65
- basic block: %bb.0 entry (0x10024740738)
- instruction: BCLR killed $cr5lt, implicit $lr8, implicit $rm, implicit undef $x3
- operand 0: killed $cr5lt
LLVM ERROR: Found 1 machine code errors.
```
There are also other existing testcases with same issue. So I add -verify-machineinstrs option to open verifying.
Differential Revision: https://reviews.llvm.org/D55408
llvm-svn: 348566
When CodeExtractor outlines values which are used by the original
function, it must store those values in some in-out parameter. This
store instruction must not be inserted in between a PHI and an EH pad
instruction, as that results in invalid IR.
This fixes the following verifier failure seen while outlining within
ObjC methods with live exit values:
The unwind destination does not have an exception handling instruction!
%call35 = invoke i8* bitcast (i8* (i8*, i8*, ...)* @objc_msgSend to i8* (i8*, i8*)*)(i8* %exn.adjusted, i8* %1)
to label %invoke.cont34 unwind label %lpad33, !dbg !4183
The unwind destination does not have an exception handling instruction!
invoke void @objc_exception_throw(i8* %call35) #12
to label %invoke.cont36 unwind label %lpad33, !dbg !4184
LandingPadInst not the first non-PHI instruction in the block.
%3 = landingpad { i8*, i32 }
catch i8* null, !dbg !1411
rdar://46540815
llvm-svn: 348562
If this is not a valid way to assign an SDLoc, then we get this
wrong all over SDAG.
I don't know enough about the SDAG to explain this. IIUC, theoretically,
debug info is not supposed to affect codegen. But here it has clearly
affected 3 different targets, and the x86 change is an actual improvement.
llvm-svn: 348552
Change the ELF YAML implementation of TextAPI so NeededLibs uses flow
sequence vector correctly instead of overriding the YAML implementation
for std::vector<std::string>>.
This should fix the test failure with the LLVM_LINK_LLVM_DYLIB build mentioned in D55381.
Still passes existing tests that cover this.
Differential Revision: https://reviews.llvm.org/D55390
llvm-svn: 348551
We shouldn't care about the debug location for a node that
we're creating, but attaching the root of the pattern should
be the best effort. (If this is not true, then we are doing
it wrong all over the SDAG).
This is no-functional-change-intended, and there are no
regression test diffs...and that's what I expected. But
there's a similar line above this diff, where those
assumptions apparently do not hold.
llvm-svn: 348550
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
The getDemandedBits() method can now only be called on instructions that
have integer or vector of integer type. Previously it could be called on
any sized instruction (even if it was not particularly useful). The size
of the return value is now always the scalar size in bits (while
previously it was the type size in bits).
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348549
This addresses a FIXME and avoids depending on an isel pattern match I think. I've remove the isel patterns too since he have no lit tests left that cover them. Hopefully that really means they are unused.
I'm trying to decide if we need SETCC_CARRY. This removes one of its usages.
Differential Revision: https://reviews.llvm.org/D55355
llvm-svn: 348536
This was probably organized as it was because bswap is a unary op.
But that's where the similarity to the other opcodes ends. We should
not limit this transform to scalars, and we should not try it if
either input has other uses. This is another step towards trying to
clean this whole function up to prevent it from causing infinite loops
and memory explosions.
Earlier commits in this series:
rL348501
rL348508
rL348518
llvm-svn: 348534
Unlike some of the folds in hoistLogicOpWithSameOpcodeHands()
above this shuffle transform, this has the expected hasOneUse()
checks in place.
llvm-svn: 348523
This patch introduces a new DAGCombiner rule to simplify concat_vectors nodes:
concat_vectors( bitcast (scalar_to_vector %A), UNDEF)
--> bitcast (scalar_to_vector %A)
This patch only partially addresses PR39257. In particular, it is enough to fix
one of the two problematic cases mentioned in PR39257. However, it is not enough
to fix the original test case posted by Craig; that particular case would
probably require a more complicated approach (and knowledge about used bits).
Before this patch, we used to generate the following code for function PR39257
(-mtriple=x86_64 , -mattr=+avx):
vmovsd (%rdi), %xmm0 # xmm0 = mem[0],zero
vxorps %xmm1, %xmm1, %xmm1
vblendps $3, %xmm0, %xmm1, %xmm0 # xmm0 = xmm0[0,1],xmm1[2,3]
vmovaps %ymm0, (%rsi)
vzeroupper
retq
Now we generate this:
vmovsd (%rdi), %xmm0 # xmm0 = mem[0],zero
vmovaps %ymm0, (%rsi)
vzeroupper
retq
As a side note: that VZEROUPPER is completely redundant...
I guess the vzeroupper insertion pass doesn't realize that the definition of
%xmm0 from vmovsd is already zeroing the upper half of %ymm0. Note that on
%-mcpu=btver2, we don't get that vzeroupper because pass vzeroupper insertion
%pass is disabled.
Differential Revision: https://reviews.llvm.org/D55274
llvm-svn: 348522
The PPC test with 2 extra uses seems clearly better by avoiding this transform.
With 1 extra use, we also prevent an extra register move (although that might
be an RA problem). The general rule should be to only make a change here if
it is always profitable. The x86 diffs are all neutral.
llvm-svn: 348518
This reverts commit r348203 and reapplies D55085 with an additional
GCOV bugfix to make the change NFC for relative file paths in .gcno files.
Thanks to Ilya Biryukov for additional testing!
Original commit message:
Update Diagnostic handling for changes in CFE.
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348512
The AVX512 diffs are neutral, but the bswap test shows a clear overreach in
hoistLogicOpWithSameOpcodeHands(). If we don't check for other uses, we can
increase the instruction count.
This could also fight with transforms trying to go in the opposite direction
and possibly blow up/infinite loop. This might be enough to solve the bug
noted here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181203/608593.html
I did not add the hasOneUse() checks to all opcodes because I see a perf
regression for at least one opcode. We may decide that's irrelevant in the
face of potential compiler crashing, but I'll see if I can salvage that first.
llvm-svn: 348508
VarStreamArray was built on the assumption that it is backed by a
StreamRef, and offset 0 of that StreamRef is the first byte of the first
record in the array.
This is a logical and intuitive assumption, but unfortunately we have
use cases where it doesn't hold. Specifically, a PDB module's symbol
stream is prefixed by 4 bytes containing a magic value, and the first
byte of record data in the array is actually at offset 4 of this byte
sequence.
Previously, we would just truncate the first 4 bytes and then construct
the VarStreamArray with the resulting StreamRef, so that offset 0 of the
underlying stream did correspond to the first byte of the first record,
but this is problematic, because symbol records reference other symbol
records by the absolute offset including that initial magic 4 bytes. So
if another record wants to refer to the first record in the array, it
would say "the record at offset 4".
This led to extremely confusing hacks and semantics in loading code, and
after spending 30 minutes trying to get some math right and failing, I
decided to fix this in the underlying implementation of VarStreamArray.
Now, we can say that a stream is skewed by a particular amount. This
way, when we access a record by absolute offset, we can use the same
values that the records themselves contain, instead of having to do
fixups.
Differential Revision: https://reviews.llvm.org/D55344
llvm-svn: 348499
Initial step towards making the function more generic (and probably move into SelectionDAG).
This is necessary to avoid massive codegen bloat for PR38243 (Add modulo rotate support to LowerRotate).
llvm-svn: 348498
Summary:
If the output of debug directives only is requested, we should drop
emission of ',debug' option from the target directive. Required for
supporting of nvprof profiler.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46061
llvm-svn: 348497
Partial Redundancy Elimination of GEPs prevents CodeGenPrepare from
sinking the addressing mode computation of memory instructions back
to its uses. The problem comes from the insertion of PHIs, which
confuse CGP and make it bail.
I've autogenerated the check lines of an existing test and added a
store instruction to demonstrate the motivation behind this change.
The store is now using the gep instead of a phi.
Differential Revision: https://reviews.llvm.org/D55009
llvm-svn: 348496
Summary:
We may end up with not emitted debug directives at the end of the module
emission. Patch fixes this problem emitting those last directives the
end of the module emission.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D54320
llvm-svn: 348495
This patch splits backend features currently
hidden behind architecture versions.
For example, currently the only way to activate
complex numbers extension is targeting an v8.3
architecture, where after the patch this extension
can be added separately.
This refactoring is required by the new command lines proposal:
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126346.html
Reviewers: DavidSpickett, olista01, t.p.northover
Subscribers: kristof.beyls, bryanpkc, javed.absar, pbarrio
Differential revision: https://reviews.llvm.org/D54633
--
It was reverted in rL348249 due a build bot failure in one of the
regression tests:
http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/14386
The problem seems to be that FileCheck behaves
different in windows and linux. This new patch
splits the test file in multiple,
and does more exact pattern matching attempting
to circumvent the issue.
llvm-svn: 348493
This reverts commit r348457.
The original commit causes clang to crash when doing an instrumented
build with a new pass manager. Reverting to unbreak our integrate.
llvm-svn: 348484
...yet!
A lot of the current code should be shared for arm and thumb mode, but
until we add tests and work out some of the details (e.g. checking the
correct subtarget feature for G_SDIV) it's safer to bail out as early as
possible for thumb targets.
This should have arguably been part of r348347, which allowed Thumb
functions to be handled by the IR Translator.
llvm-svn: 348472
I was finally able to quantify what i thought was missing in the fix,
it was vector constants. If we have a scalar (and %x, -1),
it will be instsimplified before we reach this code,
but if it is a vector, we may still have a -1 element.
Thus, we want to avoid the fold if *at least one* element is -1.
Or in other words, ignoring the undef elements, no sign bits
should be set. Thus, m_NonNegative().
A follow-up for rL348181
https://bugs.llvm.org/show_bug.cgi?id=39861
llvm-svn: 348462
This patch teaches LoopSimplifyCFG to delete loop blocks that have
become unreachable after terminator folding has been done.
Differential Revision: https://reviews.llvm.org/D54023
Reviewed By: anna
llvm-svn: 348457
The code emitting AND-subtrees used to check whether any of the operands
was an OR in order to figure out if the result needs to be negated.
However the OR could be hidden in further subtrees and not immediately
visible.
Change the code so that canEmitConjunction() determines whether the
result of the generated subtree needs to be negated. Cleanup emission
logic to use this. I also changed the code a bit to make all negation
decisions early before we actually emit the subtrees.
This fixes http://llvm.org/PR39550
Differential Revision: https://reviews.llvm.org/D54137
llvm-svn: 348444
Refactoring.
This map was only used when we used a string of integers to output the outlined
sequence. Since it's no longer used for anything, there's no reason to keep it
around.
llvm-svn: 348432
These opcodes are intended to subsume some of the capability of G_MERGE_VALUES,
as it was too powerful and thus complex to add deal with throughout the GISel
pipeline.
G_BUILD_VECTOR creates a vector value from a sequence of uniformly typed
scalar values. G_BUILD_VECTOR_TRUNC is a special opcode for handling scalar
operands which are larger than the destination vector element type, and
therefore does an implicit truncate.
G_CONCAT_VECTOR creates a vector by concatenating smaller, uniformly typed,
vectors together.
These will be used in a subsequent commit. This commit just adds the initial
infrastructure.
Differential Revision: https://reviews.llvm.org/D53594
llvm-svn: 348430
More refactoring.
Since the pruning logic has changed, and the candidate list is gone,
everything can be sunk into findCandidates.
We no longer need to keep track of the length of the longest substring, so we
can drop all of that logic as well.
After this, we just find all of the candidates and move to outlining.
llvm-svn: 348428
More refactoring.
After the changes to the pruning logic, and removing CandidateList, there's
no reason for Candiates to be shared_ptrs (or pointers at all).
std::shared_ptr<Candidate> -> Candidate.
llvm-svn: 348427
This change caused SEGVs in instcombine. (The r347934 change seems to me to be a
precipitating cause, not a root cause. Details are on the llvm-commits thread
for r347934.)
llvm-svn: 348426
Extracting from a splat constant is always handled by InstSimplify.
Move the test for this from InstCombine to InstSimplify to make
sure that stays true.
llvm-svn: 348423
Since we're now performing outlining per OutlinedFunction rather than per
Candidate, we can simply outline each candidate as it shows up.
Instead of having a pruning phase, instead, we'll outline entire functions.
Then we'll update the UnsignedVec we mapped to reflect the deletion. If any
candidate is in a space that's marked dirty, then we'll drop it.
This lets us remove the pruning logic entirely, and greatly simplifies the
code.
llvm-svn: 348420
It looks like this isn't necessary (in any tests I've done, it results
in the global being described with no location or value in the imported
side - while it's still fully described in the place it's imported from)
& results in significant/pathological debug info growth to home these
location-less global variable descriptions on the import side.
This is a rather pressing/important issue to address - this regressed
executable size for one example I'm looking at by 15%, object size is probably
similar though I haven't measured it, and a 22x increase in the number of CUs
in the cu_index in split DWARF DWP files, creating a similarly large regression
in the time it takes llvm-symbolizer to run on such binaries.
Reviewers: tejohnson, evgeny777
Differential Revision: https://reviews.llvm.org/D55309
llvm-svn: 348416
Mostly NFC, only change is the order of outlined function names.
Loop over the outlined functions instead of walking the candidate list.
This is a bit easier to understand. It's far more natural to create a function,
then replace all of its occurrences with calls than the other way around.
The functions outlined after this do not change, but their names will be
decided by their benefit. E.g, OUTLINED_FUNCTION_0 will now always be the
most beneficial function, rather than the first one seen.
This makes it easier to enforce an ordering on the outlined functions. So,
this also adds a test to make sure that the ordering works as expected.
llvm-svn: 348414
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
Treat terminators which resume exception propagation as returning instructions
(at least, for the purposes of marking outlined functions `noreturn`). This is
to avoid inserting traps after calls to outlined functions which unwind.
rdar://46129950
llvm-svn: 348404
Some gardening/refactoring.
It's cleaner to copy the instructions into the MachineFunction using the first
candidate instead of going to the mapper.
Also, by doing this we can remove the Seq member from OutlinedFunction entirely.
llvm-svn: 348390
Because we're potentially peeking through a bitcast in this transform,
we need to use overall bitwidths rather than number of elements to
determine when it's safe to proceed.
Should fix:
https://bugs.llvm.org/show_bug.cgi?id=39893
llvm-svn: 348383
Summary: debug intrinsics might be marked norecurse to enable the caller function to be norecurse and optimized if needed. This avoids code gen optimisation differences when -g is used, as in globalOpt.cpp:processInternalGlobal checks.
Reviewers: chandlerc, jmolloy, aprantl
Reviewed By: aprantl
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D55187
llvm-svn: 348381
Whenever we effectively take the address of a basic block we need to
manually update that basic block to reflect that fact or later passes
such as tail duplication and tail merging can break the invariants of
the code. =/ Sadly, there doesn't appear to be any good way of
automating this or even writing a reasonable assert to catch it early.
The change seems trivially and obviously correct, but sadly the only
really good test case I have is 1000s of basic blocks. I've tried
directly writing a test case that happens to make tail duplication do
something that crashes later on, but this appears to require an
*amazingly* complex set of conditions that I've not yet reproduced.
The change is technically covered by the tests because we mark the
blocks as having their address taken, but that doesn't really count as
properly testing the functionality.
llvm-svn: 348374
The tests here are based on the motivating cases from D54827.
More background:
1. We don't get these cases in general with SimplifyCFG because the root
of the pattern match is an icmp, not a branch. I'm not sure how often
we encounter this pattern vs. the seemingly more likely case with
branches, but I don't see evidence to leave the minimal pattern
unoptimized.
2. This has a chance of increasing compile-time because we're using a
ValueTracking call to handle the match. The motivating cases could be
handled with a simpler pair of calls to isImpliedTrueByMatchingCmp/
isImpliedFalseByMatchingCmp, but I saw that we have a more
comprehensive wrapper around those, so we might as well use it here
unless there's evidence that it's significantly slower.
3. Ideally, we'd handle the fold to constants in InstSimplify, but as
with the existing code here, we could extend this to handle cases
where the result is not a constant, but a new combined predicate.
That would mean splitting the logic across the 2 passes and possibly
duplicating the pattern-matching cost.
4. As mentioned in D54827, this seems like the kind of thing that should
be handled in Correlated Value Propagation, but that pass is currently
limited to dealing with instructions with constant operands, so extending
this bit of InstCombine is the smallest/easiest way to get these patterns
optimized.
llvm-svn: 348367
Prep work for PR38243 - mainly adding comments on where we need to add modulo support (doing so at the moment causes massive codegen regressions).
I've also consistently added support for modulo folding for uniform constants (although at the moment we have no way to trigger this) and removed the old assertions.
llvm-svn: 348366
This is an initial patch to add a minimum level of support for funnel shifts to the SelectionDAG and to begin wiring it up to the X86 SHLD/SHRD instructions.
Some partial legalization code has been added to handle the case for 'SlowSHLD' where we want to expand instead and I've added a few DAG combines so we don't get regressions from the existing DAG builder expansion code.
Differential Revision: https://reviews.llvm.org/D54698
llvm-svn: 348353
Fix potential issue with the ISD::INSERT_VECTOR_ELT case tweaking the DemandedElts mask instead of using a local copy - so later uses of the mask use the tweaked version.....
Noticed while investigating adding zero/undef folding to SimplifyDemandedVectorElts and the altered DemandedElts mask was causing mismatches.
llvm-svn: 348348
Summary:
The remaining code paths that ControlFlowHoisting introduced that were
not disabled, increased compile time by 3x for some benchmarks.
The time is spent in DominatorTree updates.
Reviewers: john.brawn, mkazantsev
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D55313
llvm-svn: 348345
Functions annotated with `__fastcall` or `__attribute__((__fastcall__))`
or `__attribute__((__swiftcall__))` may contain SEH handlers even on
Win64. This matches the behaviour of cl which allows for
`__try`/`__except` inside a `__fastcall` function. This was detected
while trying to self-host clang on Windows ARM64.
llvm-svn: 348337
It looks like MCRegAliasIterator can visit the same physical register twice. When this happens in this code in LICM we end up setting the PhysRegDef and then later in the same loop visit the register again. Now we see that PhysRegDef is set from the earlier iteration so now set PhysRegClobber.
This patch splits the loop so we have one that uses the previous value of PhysRegDef to update PhysRegClobber and second loop that updates PhysRegDef.
The X86 atomic test is an improvement. I had to add sideeffect to the two shrink wrapping tests to prevent hoisting from occurring. I'm not sure about the AMDGPU tests. It looks like the branch instruction changed at end the of the loops. And in the branch-relaxation test I think there is now "and vcc, exec, -1" instruction that wasn't there before.
Differential Revision: https://reviews.llvm.org/D55102
llvm-svn: 348330
There's a 64k limit on the number of SDNode operands, and some very large
functions with 64k or more loads can cause crashes due to this limit being hit
when a TokenFactor with this many operands is created. To fix this, create
sub-tokenfactors if we've exceeded the limit.
No test case as it requires a very large function.
rdar://45196621
Differential Revision: https://reviews.llvm.org/D55073
llvm-svn: 348324
This breaks C and C++ semantics because it can cause the address
of the global inside the module to differ from the address outside
of the module.
Differential Revision: https://reviews.llvm.org/D55237
llvm-svn: 348321
We previously disabled this in r323371 because of a bug where we selected an
extending load, but didn't delete the old G_LOAD, resulting in two loads being
generated for volatile loads.
Since we now have dedicated G_SEXTLOAD/G_ZEXTLOAD operations, and that the
tablegen patterns should no longer be able to select (ext(load x)) patterns, it
should be safe to re-enable it.
The old test case should still work as expected.
llvm-svn: 348320
Previously these were dropped. We now understand them sufficiently
well to start emitting them. From the debugger's perspective, this
now enables us to have debug info about typedefs (both global and
function-locally scoped)
Differential Revision: https://reviews.llvm.org/D55228
llvm-svn: 348306
Currently if you use -{start,stop}-{before,after}, it picks
the first instance with the matching pass name. If you run
the same pass multiple times, there's no way to distinguish them.
Allow specifying a run index wih ,N to specify which you mean.
llvm-svn: 348285
Move it out from under the constant check, reorder
predicates, add comments. This makes it easier to
extend to handle the non-constant case.
llvm-svn: 348284
This reverts commit r348203.
Reason: this produces absolute paths in .gcno files, breaking us
internally as we rely on them being consistent with the filenames passed
in the command line.
Also reverts r348157 and r348155 to account for revert of r348154 in
clang repository.
llvm-svn: 348279
There's a potential small enhancement to this code that could
solve the cases currently under proposal in D54827 via SimplifyCFG.
Whether instcombine should be doing this kind of semi-non-local
analysis in the first place is an open question, but separating
the logic out can only help if/when we decide to move it to a
different pass.
AFAICT, any proposal to do this in SimplifyCFG could also be seen
as an overreach + it would be incomplete to start the fold from a
branch rather than an icmp.
There's another question here about the code for processUGT_ADDCST_ADD().
That part may be completely dead after rL234638 ?
llvm-svn: 348273
PR17686 demonstrates that for some targets FP exceptions can fire in cases where the FP_TO_UINT is expanded using a FP_TO_SINT instruction.
The existing code converts both the inrange and outofrange cases using FP_TO_SINT and then selects the result, this patch changes this for 'strict' cases to pre-select the FP_TO_SINT input and the offset adjustment.
The X87 cases don't need the strict flag but generates much nicer code with it....
Differential Revision: https://reviews.llvm.org/D53794
llvm-svn: 348251
Add support for ISD::*_EXTEND and ISD::*_EXTEND_VECTOR_INREG opcodes.
The extra broadcast in trunc-subvector.ll will be fixed in an upcoming patch.
llvm-svn: 348246
We only needed this because it provided really aggressive constant folding even through constant pool entries created from build_vectors. The main case was for vXi8 MULH legalization which was happening as part of legalize DAG instead of as part of legalize vector ops. Now its part of vector op legalization and we've added special handling for build vectors of all constants there. This has removed the need for this code on the list tests we have.
llvm-svn: 348237
This patch renames both methods (NotifyObjectEmitted -> notifyObjectLoaded, and
NotifyObjectFreed -> notifyObjectFreed), adds an abstract "ObjectKey" (uint64_t)
parameter to notifyObjectLoaded, and replaces the ObjectFile parameter for
notifyObjectFreed with an ObjectKey. Using an ObjectKey to track identify
events, rather than a reference to the ObjectFile, allows us to free the
ObjectFile after notifyObjectLoaded is called, saving memory.
https://reviews.llvm.org/D53773
llvm-svn: 348223
The comment was misplaced, and the code didn't do what the comment indicated,
namely ignoring the varargs portion when computing the local stack size of a
funclet in emitEpilogue. This results in incorrect offset computations within
funclets that are contained in vararg functions.
Differential Revision: https://reviews.llvm.org/D55096
llvm-svn: 348222
Summary:
--asan-use-private-alias increases binary sizes by 10% or more.
Most of this space was long names of aliases and new symbols.
These symbols are not needed for the ODC check at all.
Reviewers: eugenis
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D55146
llvm-svn: 348221
This moves the stack check logic into a lambda within getOutliningCandidateInfo.
This allows us to be less conservative with stack checks. Whether or not a
stack instruction is safe to outline is dependent on the frame variant and call
variant of the outlined function; only in cases where we modify the stack can
these be unsafe.
So, if we move that logic later, when we're looking at an individual candidate,
we can make better decisions here.
This gives some code size savings as a result.
llvm-svn: 348220
If we dropped too many candidates to be beneficial when dropping candidates
that modify the stack, there's no reason to check for other cost model
qualities.
llvm-svn: 348219
Without this, we don't consider types used by aliasees in our cache key.
This caused issues when using the same cache for thin-linking the same
TU with different sets of virtual call candidates for a virtual call
inside of a constructor. That's sort of a mouthful. :)
Differential Revision: https://reviews.llvm.org/D55060
llvm-svn: 348216
In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348215
If a PHI node out of extracted region has multiple incoming values from it,
split this PHI on two parts. First PHI has incomings only from region and
extracts with it (they are placed to the separate basic block that added to the
list of outlined), and incoming values in original PHI are replaced by first
PHI. Similar solution is already used in CodeExtractor for PHIs in entry block
(severSplitPHINodes method). It covers PR39433 bug.
Patch by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D55018
llvm-svn: 348205
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
This fixes the GCOV tests in compiler-rt that were broken by the Clang
change.
llvm-svn: 348203
This is the smallest vector enhancement I could find to D54640.
Here, we're allowing narrowing to only legal vector ops because we'll see
regressions without that. All of the test diffs are wins from what I can tell.
With AVX/AVX512, we can shrink ymm/zmm ops to xmm.
x86 vector multiplies are the problem case that we're avoiding due to the
patchwork ISA, and it's not clear to me if we can dance around those
regressions using TLI hooks or if we need preliminary patches to plug those
holes.
Differential Revision: https://reviews.llvm.org/D55126
llvm-svn: 348195
The `DIEExpr` is used in debug information entries for either TLS variables
or call sites. For now the last case is unsupported for targets with delay
slots, for MIPS in particular.
The `DIEExpr::EmitValue` method calls a virtual `EmitDebugThreadLocal`
routine which, in case of MIPS, always emits either `.dtprelword` or
`.dtpreldword` directives. That is okay for "main" code, but in unit
tests `DIEExpr` instances can be created not for TLS variables only even
on MIPS hosts. That is a reason of the `TestDWARF32Version5Addr8AllForms`
failure because handling of the `R_MIPS_TLS_DTPREL` relocation writes
incorrect value into dwarf structures. And anyway unconditional emitting
of `.dtprelword` directives will be incorrect when/if debug information
entries for call sites become supported on MIPS.
The patch solves the problem by wrapping expression created in the
`MipsTargetObjectFile::getDebugThreadLocalSymbol` method in to the
`MipsMCExpr` expression with a new `MEK_DTPREL` tag. This tag is
recognized in the `MipsAsmPrinter::EmitDebugThreadLocal` method and
`.dtprelword` directives created in this case only. In other cases the
expression saved as a regular data.
Differential Revision: http://reviews.llvm.org/D54937
llvm-svn: 348194
When we have a shuffle that extends a source vector with undefs
and then do some binop on that, we must make sure that the extra
elements remain undef with that binop if we reverse the order of
the binop and shuffle.
'or' is probably the easiest example to show the bug because
'or C, undef --> -1' (not undef). But there are other
opcode/constant combinations where this is true as shown by
the 'shl' test.
llvm-svn: 348191
Summary:
The assembler processes directives and instructions in whatever order
they are in the file, then directly emits them to the streamer. This
could cause badly written (or generated) .s files to produce
incorrect binaries.
It now has state that tracks what it has most recently seen, to
enforce they are emitted in a given order that always produces
correct wasm binaries.
Also added a new test that compares obj2yaml output from llc (the
backend) to that going via .s and the assembler to ensure both paths
generate the same binaries.
The features this test covers could be extended.
Passes all wasm Lit tests.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=39557
Reviewers: sbc100, dschuff, aheejin
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55149
llvm-svn: 348185
Making the section writable doesn't affect how windows does
base relocs in case a DLL can't be loaded at the intended base
address.
This comment dates back to SVN r79346.
Differential Revision:
llvm-svn: 348178
This improves compatibility with GCC produced object files, where
the .eh_frame sections are read only. With mixed flags for the
involved .eh_frame sections, LLD creates two separate .eh_frame
sections in the output binary, one for each flag combination,
while ld.bfd probably merges them.
The previous setup of flags can be traced back to SVN r79346.
Differential Revision: https://reviews.llvm.org/D55209
llvm-svn: 348177
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
TextAPI is a library and accompanying tool that allows conversion between binary shared object stubs and textual counterparts. The motivations and uses cases for this are explained thoroughly in the llvm-dev proposal [1]. This initial commit proposes a potential structure for the TAPI library, also including support for reading/writing text-based ELF stubs (.tbe) in addition to preliminary support for reading binary ELF files. The goal for this patch is to ensure the project architecture appropriately welcomes integration of Mach-O stubbing from Apple's TAPI [2].
Added:
- TextAPI library
- .tbe read support
- .tbe write (to raw_ostream) support
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
[2] https://github.com/ributzka/tapi
Differential Revision: https://reviews.llvm.org/D53051
llvm-svn: 348170
If it's a bigger code size win to drop candidates that require stack fixups
than to demote every candidate to that variant, the outliner should do that.
This happens if the number of bytes taken by calls to functions that don't
require fixups, plus the number of bytes that'd be left is less than the
number of bytes that it'd take to emit a save + restore for all candidates.
Also add tests for each possible new behaviour.
- machine-outliner-compatible-candidates shows that when we have candidates
that don't use the stack, we can use the default call variant along with the
no save/regsave variant.
- machine-outliner-all-stack shows that when it's better to fix up the stack,
we still will demote all candidates to that case
- machine-outliner-drop-stack shows that we can discard candidates that
require stack fixups when it would be beneficial to do so.
llvm-svn: 348168
Part of the patch to not build the hash map eagerly was omitted
due to a merge conflict. Add it back, which should fix the failing
tests.
llvm-svn: 348166
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348155
There are potential improvements to the structure of this API
raised by D54994, but remove some cosmetic blemishes before
making any functional changes.
llvm-svn: 348149
It appears that print-module-scope was not implemented for legacy SCC passes.
Fixed to print a whole module instead of just current SCC.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D54793
llvm-svn: 348144
A loaded value with multiple users compared with 0 will become a load and
test single instruction. The load is not folded in this case (multiple
users), but the compare instruction is eliminated.
This patch returns 0 cost for the icmp in these cases.
Review: Ulrich Weigand
https://reviews.llvm.org/D55111
llvm-svn: 348141
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SSBS, as it was previously only possible to
enable by selecting -march=armv8.5-a.
Similar patch upstream in GNU binutils:
https://sourceware.org/ml/binutils/2018-09/msg00274.html
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54629
llvm-svn: 348137
The introduction of S_{ADD|SUB}_U64_PSEUDO instructions which are decomposed
into VOP3 instruction pairs for S_ADD_U64_PSEUDO:
V_ADD_I32_e64
V_ADDC_U32_e64
and for S_SUB_U64_PSEUDO
V_SUB_I32_e64
V_SUBB_U32_e64
preclude the use of SDWA to encode a constant.
SDWA: Sub-Dword addressing is supported on VOP1 and VOP2 instructions,
but not on VOP3 instructions.
We desire to fold the bit-and operand into the instruction encoding
for the V_ADD_I32 instruction. This requires that we transform the
VOP3 into a VOP2 form of the instruction (_e32).
%19:vgpr_32 = V_AND_B32_e32 255,
killed %16:vgpr_32, implicit $exec
%47:vgpr_32, %49:sreg_64_xexec = V_ADD_I32_e64
%26.sub0:vreg_64, %19:vgpr_32, implicit $exec
%48:vgpr_32, dead %50:sreg_64_xexec = V_ADDC_U32_e64
%26.sub1:vreg_64, %54:vgpr_32, killed %49:sreg_64_xexec, implicit $exec
which then allows the SDWA encoding and becomes
%47:vgpr_32 = V_ADD_I32_sdwa
0, %26.sub0:vreg_64, 0, killed %16:vgpr_32, 0, 6, 0, 6, 0,
implicit-def $vcc, implicit $exec
%48:vgpr_32 = V_ADDC_U32_e32
0, %26.sub1:vreg_64, implicit-def $vcc, implicit $vcc, implicit $exec
Differential Revision: https://reviews.llvm.org/D54882
llvm-svn: 348132
This has two positive effects. First, using a custom node prevents
recombination leading to an infinite loop since the output DAG is notionally a
little more complex than the input one. Using a flag-setting instruction also
allows the subtraction to be folded with the related comparison more easily.
https://reviews.llvm.org/D53190
llvm-svn: 348122
This patch splits backend features currently
hidden behind architecture versions.
For example, currently the only way to activate
complex numbers extension is targeting an v8.3
architecture, where after the patch this extension
can be added separately.
This refactoring is required by the new command lines proposal:
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126346.html
Reviewers: DavidSpickett, olista01, t.p.northover
Subscribers: kristof.beyls, bryanpkc, javed.absar, pbarrio
Differential revision: https://reviews.llvm.org/D54633
llvm-svn: 348121
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
In the Arm assembly parser, we first match an instruction, then call
processInstruction to possibly change it to a different encoding, to
match rules in the architecture manual which can't be expressed by the
table-generated matcher.
This adds debug printing so that this process is visible when using the
-debug option.
To support this, I've added a new overload of MCInst::dump_pretty which
takes the opcode name as a StringRef, since we don't have an InstPrinter
instance in the assembly parser. Instead, we can get the same
information directly from the MCInstrInfo.
Differential revision: https://reviews.llvm.org/D54852
llvm-svn: 348113
This change enables conservative assembly instrumentation in KMSAN builds
by default.
It's still possible to disable it with -msan-handle-asm-conservative=0
if something breaks. It's now impossible to enable conservative
instrumentation for userspace builds, but it's not used anyway.
llvm-svn: 348112
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 348109
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
If the shift amount is known, we can determine the known bits of the
output based on the known bits of two inputs.
This is essentially the same functionality as implemented in D54869,
but for ValueTracking rather than InstCombine SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D55140
llvm-svn: 348091
This makes the SDAG behavior consistent with the way we do this in IR.
It's possible that we were getting the wrong answer before. For example,
'xor undef, undef --> 0' but 'xor undef, C' --> undef.
But the most practical improvement is likely as shown in the tests here -
for FP, we were overconstraining undef lanes to NaN, and that can prevent
vector simplifications/narrowing (see D51553).
llvm-svn: 348090
This change prevents the crash noted in the post-commit comments
for rL347478 :
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181119/605166.html
We can't guarantee that an oversized shift amount is folded away,
so we have to check for it.
Note that I committed an incomplete fix for that crash with:
rL347502
But as discussed here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181126/605679.html
...we have to try harder.
So I'm not sure how to expose the bug now (and apparently no fuzzers have found
a way yet either).
On the plus side, we have discovered that we're missing real optimizations by
not simplifying nodes sooner, so the earlier fix still has value, and there's
likely more value in extending that so we can simplify more opcodes and simplify
when doing RAUW and/or putting nodes on the combiner worklist.
Differential Revision: https://reviews.llvm.org/D54954
llvm-svn: 348089
We were duplicating code around the existing isImpliedCondition() that
checks for a predecessor block/dominating condition, so make that a
wrapper call.
llvm-svn: 348088
Previously this code generated its own extracts and build_vector. But we can use a simpler concat_vectors or scalar_to_vector operation and let type legalization do additional legalization of those operations.
llvm-svn: 348087
The generic legalizer will fall back to a stack spill that uses a truncating store. That store will get expanded into a shuffle and non-truncating store on pre-avx512 targets. Once that happens the stack store/load pair will be combined away leaving behind the shuffle and bitcasts. On avx512 targets the truncating store is legal so doesn't get folded away.
By custom legalizing it we can avoid this churn and maybe produce better code.
llvm-svn: 348085
If we know that we'll definitely save LR to a register, there's no reason to
pre-check whether or not a stack instruction is unsafe to fix up.
This makes it so that we check for that condition before mapping instructions.
This allows us to outline more, since we don't pessimise as many instructions.
Also update some tests, since we outline more.
llvm-svn: 348081
Summary: With sse4.1 we use two zero_extend_vector_inreg and a pshufd to expand the v16i8 input into two v8i16 vectors for the multiply. That's 3 shuffles to extend one operand. The other operand is usually constant as this is mostly used by division by constant optimization. Pre sse4.1 we use a punpckhbw and a punpcklbw with a zero vector. That's two shuffles and an xor and a copy due to tied register constraints. That seems maybe better than the 3 shuffles. With AVX we avoid the copy so that's obviously better.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55138
llvm-svn: 348079
The identity ~(x ^ y) == (~x ^ y) == (x ^ ~y) allows XNOR (XOR/NOT) to turn into NOT/XOR. Handling this case with its own split means we can make the NOT remain in the scalar unit. Previously, we split 64-bit XNOR into two 32-bit XNOR, then lowered. Now, we get three instructions (s_not, v_xor, v_xor) rather than four in the case where either of the sources is a scalar 64-bit.
Add test cases to xnor.ll to attempt XNOR Vx, Sy and XNOR Sx, Vy. Also adding test that uses the opposite identity such that (~x ^ y) on the scalar unit (or vector for gfx906) can generate XNOR. This already worked, but I didn't see a test for it.
Differential: https://reviews.llvm.org/D55071
llvm-svn: 348075
D52935 introduced the ability for SimplifyDemandedBits to call SimplifyDemandedVectorElts through BITCASTs if the demanded bit mask entirely covered the sub element.
This patch relaxes this to demanding an element if we need any bit from it.
Differential Revision: https://reviews.llvm.org/D54761
llvm-svn: 348073
Extend ssub.sat(X, C) -> sadd.sat(X, -C) canonicalization to also
support non-splat vector constants. This is done by generalizing
the implementation of the isNotMinSignedValue() helper to return
true for constants that are non-splat, but don't contain any
signed min elements.
Differential Revision: https://reviews.llvm.org/D55011
llvm-svn: 348072
Summary:
Follow up to D54270, which allowed importing of var args functions
unless they called va_start. As pointed out in the post-commit comments
on that patch, the inliner can handle functions that call va_start in
certain situations as well. Go ahead and enable importing of all var
args functions. Measurements on a large binary show that this increases
imports and binary size by an insignificant amount.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54607
llvm-svn: 348068
As noted by Eli Friedman <https://reviews.llvm.org/D52977?id=168629#1315291>,
the RV64I shift patterns for SLLW/SRLW/SRAW make some incorrect assumptions.
SRAW assumed that (sext_inreg foo, i32) could only be produced when
sign-extended an i32. However, it can be produced by input such as:
define i64 @tricky_ashr(i64 %a, i64 %b) {
%1 = shl i64 %a, 32
%2 = ashr i64 %1, 32
%3 = ashr i64 %2, %b
ret i64 %3
}
It's important not to select sraw in the above case, because sraw only uses
bits lower 5 bits from the shift, while a shift of 32-63 would be valid.
Similarly, the patterns for srlw assumed (and foo, 0xffffffff) would only be
produced when zero-extending a value that was originally i32 in LLVM IR. This
is obviously incorrect.
This patch removes the SLLW/SRLW/SRAW shift patterns for the time being and
adds test cases that would demonstrate a miscompile if the incorrect patterns
were re-added.
llvm-svn: 348067
identify_magic does not need the file to be null terminated. Passing
true here causes the file reading code to decide not to use mmap in
some rare cases (which happen to be true 100% of the time in PDB files)
which can lead to very large files failing to load. Since it was
probably just an accident that we were passing true here (since it is
the default function parameter), this should be strictly an improvement.
llvm-svn: 348059
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 348050
Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
Summary:
This is patch #3 of the new DivergenceAnalysis
<https://lists.llvm.org/pipermail/llvm-dev/2018-May/123606.html>
The GPUDivergenceAnalysis is intended to eventually supersede the existing
LegacyDivergenceAnalysis. The existing LegacyDivergenceAnalysis produces
incorrect results on unstructured Control-Flow Graphs:
<https://bugs.llvm.org/show_bug.cgi?id=37185>
This patch adds the option -use-gpu-divergence-analysis to the
LegacyDivergenceAnalysis to turn it into a transparent wrapper for the
GPUDivergenceAnalysis.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: jholewinski, jvesely, jfb, llvm-commits, alex-t, sameerds, arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D53493
llvm-svn: 348048
Instead of treating the outlined functions for these as distinct frames, they
should be combined into one case. Neither allows for stack fixups, and both
generate the same frame. Thus, they ought to be considered one case.
This makes the code far easier to understand, for one thing. It also offers
some small code size improvements. It's fairly rare to see a class of outlined
functions that doesn't fall entirely into one variant (on CTMark anyway). It
does happen from time to time though.
This mostly offers some serious simplification.
Also update the test to show the added functionality.
llvm-svn: 348036
All that you can legitimately do with the CFI for a nounwind function
is get a backtrace, and adjusting the SCS register is not (currently)
required for this purpose.
Differential Revision: https://reviews.llvm.org/D54988
llvm-svn: 348035
Summary:
When mem2reg inserts phi nodes in blocks with unreachable predecessors,
it adds undef operands for those incoming edges. When there are
multiple such predecessors, the order is currently based on the address
of the BasicBlocks. This change fixes that by using the BBNumbers in
the sort/search predicates, as is done elsewhere in mem2reg to ensure
determinism.
Also adds a testcase with a bunch of unreachable preds, which
(nodeterministically) fails without the fix.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55077
llvm-svn: 348024
Update IR verifier to check the constraint that DIFile source is present on all
files or no files.
Differential Revision: https://reviews.llvm.org/D54953
llvm-svn: 348022
This reduces the number of shuffle operations that need to be done. The splitting strategy requires the shuffle unit for the extraction and the extension. With the unpack strategy the unpacks accomplish a splitting and extending in one operation.
llvm-svn: 348019
This does require a constant pool load instead of loading an immediate into a gpr, moving to a k register and masking. But its less instructions and more consistent with previous ISAs. It probably opens up more combine opportunities as one of the test cases demonstrates.
llvm-svn: 348018
This patch adds BPF Debug Format (BTF) as a standalone
LLVM debuginfo. The BTF related sections are directly
generated from IR. The BTF debuginfo is generated
only when the compilation target is BPF.
What is BTF?
============
First, the BPF is a linux kernel virtual machine
and widely used for tracing, networking and security.
https://www.kernel.org/doc/Documentation/networking/filter.txthttps://cilium.readthedocs.io/en/v1.2/bpf/
BTF is the debug info format for BPF, introduced in the below
linux patch
69b693f0ae (diff-06fb1c8825f653d7e539058b72c83332)
in the patch set mentioned in the below lwn article.
https://lwn.net/Articles/752047/
The BTF format is specified in the above github commit.
In summary, its layout looks like
struct btf_header
type subsection (a list of types)
string subsection (a list of strings)
With such information, the kernel and the user space is able to
pretty print a particular bpf map key/value. One possible example below:
Withtout BTF:
key: [ 0x01, 0x01, 0x00, 0x00 ]
With BTF:
key: struct t { a : 1; b : 1; c : 0}
where struct is defined as
struct t { char a; char b; short c; };
How BTF is generated?
=====================
Currently, the BTF is generated through pahole.
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=68645f7facc2eb69d0aeb2dd7d2f0cac0feb4d69
and available in pahole v1.12
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=4a21c5c8db0fcd2a279d067ecfb731596de822d4
Basically, the bpf program needs to be compiled with -g with
dwarf sections generated. The pahole is enhanced such that
a .BTF section can be generated based on dwarf. This format
of the .BTF section matches the format expected by
the kernel, so a bpf loader can just take the .BTF section
and load it into the kernel.
8a138aed4a
The .BTF section layout is also specified in this patch:
with file include/llvm/BinaryFormat/BTF.h.
What use cases this patch tries to address?
===========================================
Currently, only the bpf instruction stream is required to
pass to the kernel. The kernel verifies it, jits it if configured
to do so, attaches it to a particular kernel attachment point,
and later executes when a particular event happens.
This patch tries to expand BTF to support two more use cases below:
(1). BPF supports subroutine calls.
During performance analysis, it would be good to
differentiate which call is hot instead of just
providing a virtual address. This would require to
pass a unique identifier for each subroutine to
the kernel, the subroutine name is a natual choice.
(2). If a particular jitted instruction is hot, we want
user to know which source line this jitted instruction
belongs to. This would require the source information
is available to various profiling tools.
Note that in a single ELF file,
. there may be multiple loadable bpf programs,
. for a particular to-be-loaded bpf instruction stream,
its instructions may come from multiple PROGBITS sections,
the bpf loader needs to merge them together to a single
consecutive insn stream before loading to the kernel.
For example:
section .text: subroutines funcFoo
section _progA: calling funcFoo
section _progB: calling funcFoo
The bpf loader could construct two loadable bpf instruction
streams and load them into the kernel:
. _progA funcFoo
. _progB funcFoo
So per ELF section function offset and instruction offset
will need to be adjusted before passing to the kernel, and
the kernel essentially expect only one code section regardless
of how many in the ELF file.
What do we propose and Why?
===========================
To support the above two use cases, we propose to
add an additional section, .BTF.ext, to the ELF file
which is the input of the bpf loader. A different section
is preferred since loader may need to manipulate it before
loading part of its data to the kernel.
The .BTF.ext section has a similar header to the .BTF section
and it contains two subsections for func_info and line_info.
. the func_info maps the func insn byte offset to a func
type in the .BTF type subsection.
. the line_info maps the insn byte offset to a line info.
. both func_info and line_info subsections are organized
by ELF PROGBITS AX sections.
pahole is not a good place to implement .BTF.ext as
pahole is mostly for structure hole information and more
importantly, we want to pass the actual code to the kernel.
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical as you may not even know who
loads this bpf program.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
LLVM is a good place to implement.
. The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
. Another consideration is for JIT. The project like bcc
(https://github.com/iovisor/bcc)
use MCJIT to compile a C program into bpf insns and
load them to the kernel. The llvm generated BTF sections
will be readily available for such cases as well.
Design and implementation of emiting .BTF/.BTF.ext sections
===========================================================
The BTF debuginfo format is defined. Both .BTF and .BTF.ext
sections are generated directly from IR when both
"-target bpf" and "-g" are specified. Note that
dwarf sections are still generated as dwarf is used
by user space tools like llvm-objdump etc. for BPF target.
This patch also contains tests to verify generated
.BTF and .BTF.ext sections for all supported types, func_info
and line_info subsections. The patch is also tested
against linux kernel bpf sample tests and selftests.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D53736
llvm-svn: 347999
Summary:
If a given liveness arg of STATEPOINT is at a fixed frame index
(e.g. a function argument passed on stack), prefer to use this
fixed location even the address is also in a register. If we use
the register it will generate a spill, which is not necessary
since the fixed frame index can be directly recorded in the stack
map.
Patch by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, niravd, reames
Reviewed By: reames
Subscribers: cherryyz, reames, anna, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53889
llvm-svn: 347998
Summary:
An additional fix for PR39774. Need to update the references for the
RedcutionRoot instruction when it is replaced during the vectorization
phase to avoid compiler crash on reduction vectorization.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55017
llvm-svn: 347997
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Summary:
This simplifies writing predicates for pattern fragments that are
automatically re-associated or commuted.
For example, a followup patch adds patterns for fragments of the form
(add (shl $x, $y), $z) to the AMDGPU backend. Such patterns are
automatically commuted to (add $z, (shl $x, $y)), which makes it basically
impossible to refer to $x, $y, and $z generically in the PredicateCode.
With this change, the PredicateCode can refer to $x, $y, and $z simply
as `Operands[i]`.
Test confirmed that there are no changes to any of the generated files
when building all (non-experimental) targets.
Change-Id: I61c00ace7eed42c1d4edc4c5351174b56b77a79c
Reviewers: arsenm, rampitec, RKSimon, craig.topper, hfinkel, uweigand
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D51994
llvm-svn: 347992
This patch adds CSR instructions aliases for the cases where the instruction
takes an immediate operand but the alias doesn't have the i suffix. This is
necessary for gas/gcc compatibility.
gas doesn't do a similar conversion for fsflags or fsrm, so this should be
complete.
Differential Revision: https://reviews.llvm.org/D55008
Patch by Luís Marques.
llvm-svn: 347991
Adding a new reduction pattern match for vectorizing code similar
to TSVC s3111:
for (int i = 0; i < N; i++)
if (a[i] > b)
sum += a[i];
This patch adds support for fadd, fsub and fmull, as well as multiple
branches and different (but compatible) instructions (ex. add+sub) in
different branches.
The difference from the previous patch(https://reviews.llvm.org/D49168)
is as follows:
- Added check of fast-math property of fp-instruction to the
previous patch
- Fix/add some pattern for if-reduction.ll
Differential Revision: https://reviews.llvm.org/D54464
Patch by Takahiro Miyoshi <takahiro.miyoshi@linaro.org>
and Masakazu Ueno <masakazu.ueno@linaro.org>
llvm-svn: 347989
This patch adds support for UNIMP in both 32- and 16-bit forms. The 32-bit
form can be seen as a variant of the ECALL/EBREAK/etc. family of instructions.
The 16-bit form is just all zeroes, which isn't a valid RISC-V instruction,
but still follows the 16-bit instruction form (i.e. bits 0-1 != 11).
Until recently unimp was undocumented and supported just by binutils, which
printed unimp for either the 16 or 32-bit form. Both forms are now documented
<https://github.com/riscv/riscv-asm-manual/pull/20> and binutils now supports
c.unimp <https://sourceware.org/ml/binutils-cvs/2018-11/msg00179.html>.
Differential Revision: https://reviews.llvm.org/D54316
Patch by Luís Marques.
llvm-svn: 347988
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the result of ISD::FLT_ROUNDS_.
Differential Revision: https://reviews.llvm.org/D53820
llvm-svn: 347986
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the operands of ISD::PREFETCH.
Differential Revision: https://reviews.llvm.org/D53281
llvm-svn: 347980
Terminator folding transform lacks MemorySSA update for memory Phis,
while they exist within MemorySSA analysis. They need exactly the same
type of updates as regular Phis. Failing to update them properly ends up
with inconsistent MemorySSA and manifests in various assertion failures.
This patch adds Memory Phi updates to this transform.
Thanks to @jonpa for finding this!
Differential Revision: https://reviews.llvm.org/D55050
Reviewed By: asbirlea
llvm-svn: 347979
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the operand.
Differential Revision: https://reviews.llvm.org/D53279
llvm-svn: 347978
DAGTypeLegalizer::PromoteSetCCOperands currently prefers to zero-extend
operands when it is able to do so. For some targets this is more expensive
than a sign-extension, which is also a valid choice. Introduce the
isSExtCheaperThanZExt hook and use it in the new SExtOrZExtPromotedInteger
helper. On RISC-V, we prefer sign-extension for FromTy == MVT::i32 and ToTy ==
MVT::i64, as it can be performed using a single instruction.
Differential Revision: https://reviews.llvm.org/D52978
llvm-svn: 347977
As discussed in the RFC
<http://lists.llvm.org/pipermail/llvm-dev/2018-October/126690.html>, 64-bit
RISC-V has i64 as the only legal integer type. This patch introduces patterns
to support codegen of the new instructions
introduced in RV64I: addiw, addiw, subw, sllw, slliw, srlw, srliw, sraw,
sraiw, ld, sd.
Custom selection code is needed for srliw as SimplifyDemandedBits will remove
lower bits from the mask, meaning the obvious pattern won't work:
def : Pat<(sext_inreg (srl (and GPR:$rs1, 0xffffffff), uimm5:$shamt), i32),
(SRLIW GPR:$rs1, uimm5:$shamt)>;
This is sufficient to compile and execute all of the GCC torture suite for
RV64I other than those files using frameaddr or returnaddr intrinsics
(LegalizeDAG doesn't know how to promote the operands - a future patch
addresses this).
When promoting i32 sltu/sltiu operands, it would be more efficient to use
sign-extension rather than zero-extension for RV64. A future patch adds a hook
to allow this.
Differential Revision: https://reviews.llvm.org/D52977
llvm-svn: 347973
Previously we emitted a punpcklbw/punpckhbw to move the byte elements into the upper half of 16 bit elements then shifted right by 8 to zero the upper bits. After DAG combine we end up with punpcklbw/punpckhbw into the lower bits with zeros in the uppers bits and no shifts. So just emit that directly.
llvm-svn: 347966
Don't expand SDIV with an immediate that is a power of 2 if we optimise for
minimum code size. For example:
sdiv %1, i32 4
gets expanded to a sequence of 3 instructions, but this is suboptimal for
minimum code size so instead we just generate a MOV and a SDIV if integer
division is supported.
Differential Revision: https://reviews.llvm.org/D54546
llvm-svn: 347965
Three minor changes to these extra costs:
* For ICmp instructions, instead of adding 2 all the time for extending each
operand, this is only done if that operand is neither a load or an
immediate.
* The operands extension costs for divides removed, because we now use a high
cost already for the divide (20).
* The costs for lhsr/ashr extra costs removed as this did not seem useful.
Review: Ulrich Weigand
https://reviews.llvm.org/D55053
llvm-svn: 347961
We had a EVT variable capturing the result of getSimpleValueType which returns an MVT. Another place using EVT that could have been MVT. And an 'int' that should be 'unsigned'.
llvm-svn: 347959
Summary:
Suppressed warnings in release builds due to variable used
only in assert statement.
Subscribers: llvm-commits, eraman, mgorny
Differential Revision: https://reviews.llvm.org/D55100
llvm-svn: 347939
r320789 suppressed moving the insertion point of SCEV expressions with
dev/rem operations to the loop header in non-loop-invariant situations.
This, and similar, hoisting is also unsafe in the loop-invariant case,
since there may be a guard against a zero denominator. This is an
adjustment to the fix of r320789 to suppress the movement even in the
loop-invariant case.
This fixes PR30806.
Differential Revision: https://reviews.llvm.org/D54713
llvm-svn: 347934
Summary:
Expands for vector types all of the integer operations that are
expanded for scalars because they are not supported at all by
WebAssembly.
This CL has no tests because such tests would really be testing the
target-independent expansion, but I'm happy to add tests if reviewers
think it would be helpful.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55010
llvm-svn: 347923
Scattered ARM relocations for Mach-O's only have 24 bits available to
encode the offset. This is not checked but just truncated and can result
in corrupt binaries after linking because the relocations are applied to
the wrong offset. This patch will check and error out in those
situations instead of emitting a wrong relocation.
Patch by: Sander Bogaert (dzn)
Differential revision: https://reviews.llvm.org/D54776
llvm-svn: 347922
The motivating case for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=32023
and the corresponding rot16.ll regression tests.
Because x86 scalar shift amounts are i8 values, we can end up with trunc-binop-trunc
sequences that don't get folded in IR.
As the TODO comments suggest, there will be regressions if we extend this (for x86,
we mostly seem to be missing LEA opportunities, but there are likely vector folds
missing too). I think those should be considered existing bugs because this is the
same transform that we do as an IR canonicalization in instcombine. We just need
more tests to make those visible independent of this patch.
Differential Revision: https://reviews.llvm.org/D54640
llvm-svn: 347917
Utilise a similar ('late') lowering strategy to D47882. The changes to
AtomicExpandPass allow this strategy to be utilised by other targets which
implement shouldExpandAtomicCmpXchgInIR.
All cmpxchg are lowered as 'strong' currently and failure ordering is ignored.
This is conservative but correct.
Differential Revision: https://reviews.llvm.org/D48131
llvm-svn: 347914
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
Currently CaptureTracker gives up if it encounters a value with more than 20
uses. The motivation for this cap is to keep it relatively cheap for
BasicAliasAnalysis use case, where the results can't be cached. Although, other
clients of CaptureTracker might be ok with higher cost. This patch introduces an
argument for PointerMayBeCaptured functions to specify the max number of uses to
explore. The motivation for this change is a downstream user of CaptureTracker,
but I believe upstream clients of CaptureTracker might also benefit from more
fine grained cap.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55042
llvm-svn: 347910
It makes more sense to order FI-based memops in descending order when
the stack goes down. This allows offsets to stay "consecutive" and allow
easier pattern matching.
llvm-svn: 347906
I believe we should be legalizing these with the rest of vector binary operations. If any custom lowering is required for these nodes, this will give the DAG combine between LegalizeVectorOps and LegalizeDAG to run on the custom code before constant build_vectors are lowered in LegalizeDAG.
I've moved MULHU/MULHS handling in AArch64 from Lowering to isel. Moving the lowering earlier caused build_vector+extract_subvector simplifications to kick in which made the generated code worse.
Differential Revision: https://reviews.llvm.org/D54276
llvm-svn: 347902
This is another patch for -x86-experimental-vector-widening. This pre widens narrow division by constants so that we can get pass the legal type check in the generic DAG combiner. Otherwise we end up scalarizing.
I've restricted this to splats for now because it was easy to just call DAG.getConstant. Not sure what we should do for non-splat? Increase the element size?Widen the constant vector by padding with 1?
Differential Revision: https://reviews.llvm.org/D54919
llvm-svn: 347898
This is an almost direct move of the functionality from InstCombine to
InstSimplify. There's no reason not to do this in InstSimplify because
we never create a new value with this transform.
(There's a question of whether any dominance-based transform belongs in
either of these passes, but that's a separate issue.)
I've changed 1 of the conditions for the fold (1 of the blocks for the
branch must be the block we started with) into an assert because I'm not
sure how that could ever be false.
We need 1 extra check to make sure that the instruction itself is in a
basic block because passes other than InstCombine may be using InstSimplify
as an analysis on values that are not wired up yet.
The 3-way compare changes show that InstCombine has some kind of
phase-ordering hole. Otherwise, we would have already gotten the intended
final result that we now show here.
llvm-svn: 347896
This commit caused a large compile-time slowdown in some cases when NDEBUG is
off due to the dominator tree verification it added. Fix this by only doing
dominator tree and loop info verification when something has been hoisted.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347889
Summary:
We can sometimes end up with multiple copies of a local variable that
have the same GUID in the index. This happens when there are local
variables with the same name that are in different source files having the
same name/path at compile time (but compiled into different bitcode objects).
In this case make sure we import the copy in the caller's module.
This enables importing both of the variables having the same GUID
(but which will have different promoted names since the module paths,
and therefore the module hashes, will be distinct).
Importing the wrong copy is particularly problematic for read only
variables, since we must import them as a local copy whenever
referenced. Otherwise we get undefs at link time.
Note that the llvm-lto.cpp and ThinLTOCodeGenerator changes are needed
for testing the distributed index case via clang, which will be sent as
a separate clang-side patch shortly. We were previously not doing the
dead code/read only computation before computing imports when testing
distributed index generation (like it was for testing importing and
other ThinLTO mechanisms alone).
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55047
llvm-svn: 347886
This patch adds support for S_ANDN2, S_ORN2 32-bit and 64-bit instructions and adds splits to move them to the vector unit (for which there is no equivalent instruction). It modifies the way that the more complex scalar instructions are lowered to vector instructions by first breaking them down to sequences of simpler scalar instructions which are then lowered through the existing code paths. The pattern for S_XNOR has also been updated to apply inversion to one input rather than the output of the XOR as the result is equivalent and may allow leaving the NOT instruction on the scalar unit.
A new tests for NAND, NOR, ANDN2 and ORN2 have been added, and existing tests now hit the new instructions (and have been modified accordingly).
Differential: https://reviews.llvm.org/D54714
llvm-svn: 347877
My change svn-id: 347871 caused a buildbot failure due to an unused
variable def (used in an assert).
Change-Id: Ia882d18bb6fa79b4d7bbfda422b9ea5d23eab336
llvm-svn: 347876
Summary:
When splitting musttail calls, the split blocks' original terminators
get removed; inform the DTU when this happens.
Also add a testcase that fails an assertion in the DTU without this fix.
Reviewers: fhahn, junbuml
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55027
llvm-svn: 347872
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
1. The variables were confusing: 'C' typically refers to a constant, but here it was the Cmp.
2. Formatting violations.
3. Simplify code to return true/false constant.
llvm-svn: 347868
This reverts commits r347776 and r347778.
The first one, r347776, caused significant compile time regressions
for certain input files, see PR39836 for details.
llvm-svn: 347867
It causes asserts building BoringSSL. See https://crbug.com/91009#c3 for
repro.
This also reverts the follow-ups:
Revert r347724 "Do not insert prefetches with unsupported memory operands."
Revert r347606 "[X86] Add dependency from X86 to ProfileData after rL347596"
Revert r347607 "Add new passes to X86 pipeline tests"
llvm-svn: 347864
* Tell the StackProtector pass to generate the epilogue instrumentation
when GlobalISel is enabled because GISel currently does not implement
the same deferred epilogue insertion as SelectionDAG.
* Update StackProtector::InsertStackProtectors() to find a stack guard
slot by searching for the llvm.stackprotector intrinsic when the
prologue was not created by StackProtector itself but the pass still
needs to generate the epilogue instrumentation. This fixes a problem
when the pass would abort because the stack guard AllocInst pointer
was null when generating the epilogue -- test
CodeGen/AArch64/GlobalISel/arm64-irtranslator-stackprotect.ll.
Differential Revision: https://reviews.llvm.org/D54518
llvm-svn: 347862
Change meaning of TargetOptions::EnableGlobalISel. The flag was
previously set only when a target switched on GlobalISel but it is now
always set when the GlobalISel pipeline is enabled. This makes the flag
consistent with TargetOptions::EnableFastISel and allows its use in
other parts of the compiler to determine when GlobalISel is enabled.
The EnableGlobalISel flag had previouly only one use in
TargetPassConfig::isGlobalISelAbortEnabled(). The method used its value
to determine if GlobalISel was enabled by a target and returned false in
such a case. To preserve the current behaviour, a new flag
TargetOptions::GlobalISelAbort is introduced to separately record the
abort behaviour.
Differential Revision: https://reviews.llvm.org/D54518
llvm-svn: 347861
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
Summary:
MachineLoopInfo cannot be relied on for correctness, because it cannot
properly recognize loops in irreducible control flow which can be
introduced by late machine basic block optimization passes. See the new
test case for the reduced form of an example that occurred in practice.
Use a simple fixpoint iteration instead.
In order to facilitate this change, refactor WaitcntBrackets so that it
only tracks pending events and registers, rather than also maintaining
state that is relevant for the high-level algorithm. Various accessor
methods can be removed or made private as a consequence.
Affects (in radv):
- dEQP-VK.glsl.loops.special.{for,while}_uniform_iterations.select_iteration_count_{fragment,vertex}
Fixes: r345719 ("AMDGPU: Rewrite SILowerI1Copies to always stay on SALU")
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54231
llvm-svn: 347853
Summary:
There is one obsolete reference to using -1 as an indication of "unknown",
but this isn't actually used anywhere.
Using unsigned makes robust wrapping checks easier.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, llvm-commits, tpr, t-tye, hakzsam
Differential Revision: https://reviews.llvm.org/D54230
llvm-svn: 347852
Summary:
Instead of storing the "score" (last time point) of the various relevant
events, only store whether an event is pending or not.
This is sufficient, because whenever only one event of a count type is
pending, its last time point is naturally the upper bound of all time
points of this count type, and when multiple event types are pending,
the count type has gone out of order and an s_waitcnt to 0 is required
to clear any pending event type (and will then clear all pending event
types for that count type).
This also removes the special handling of GDS_GPR_LOCK and EXP_GPR_LOCK.
I do not understand what this special handling ever attempted to achieve.
It has existed ever since the original port from an internal code base,
so my best guess is that it solved a problem related to EXEC handling in
that internal code base.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54228
llvm-svn: 347850
Summary:
It hides the type casting ugliness, and I happened to have to add a new
such loop (in a later patch).
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54227
llvm-svn: 347849
Summary:
Reduce the statefulness of the algorithm in two ways:
1. More clearly split generateWaitcntInstBefore into two phases: the
first one which determines the required wait, if any, without changing
the ScoreBrackets, and the second one which actually inserts the wait
and updates the brackets.
2. Communicate pre-existing s_waitcnt instructions using an argument to
generateWaitcntInstBefore instead of through the ScoreBrackets.
To simplify these changes, a Waitcnt structure is introduced which carries
the counts of an s_waitcnt instruction in decoded form.
There are some functional changes:
1. The FIXME for the VCCZ bug workaround was implemented: we only wait for
SMEM instructions as required instead of waiting on all counters.
2. We now properly track pre-existing waitcnt's in all cases, which leads
to less conservative waitcnts being emitted in some cases.
s_load_dword ...
s_waitcnt lgkmcnt(0) <-- pre-existing wait count
ds_read_b32 v0, ...
ds_read_b32 v1, ...
s_waitcnt lgkmcnt(0) <-- this is too conservative
use(v0)
more code
use(v1)
This increases code size a bit, but the reduced latency should still be a
win in basically all cases. The worst code size regressions in my shader-db
are:
WORST REGRESSIONS - Code Size
Before After Delta Percentage
1724 1736 12 0.70 % shaders/private/f1-2015/1334.shader_test [0]
2276 2284 8 0.35 % shaders/private/f1-2015/1306.shader_test [0]
4632 4640 8 0.17 % shaders/private/ue4_elemental/62.shader_test [0]
2376 2384 8 0.34 % shaders/private/f1-2015/1308.shader_test [0]
3284 3292 8 0.24 % shaders/private/talos_principle/1955.shader_test [0]
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54226
llvm-svn: 347848
Lack of an attribute means that the function hasn't been checked for what vector width it requires. So if the caller or the callee doesn't have the attribute we should make sure the combined function after inlining does not have the attribute.
If the caller already doesn't have the attribute we can just avoid adding it. Otherwise if the callee doesn't have the attribute just remove the caller's attribute.
llvm-svn: 347841
This is a fix for PR39625 with improvement the compile time
by reducing the number of intermediate Phi nodes created.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54932
llvm-svn: 347839
Moving to PlatformType from BinaryFormat had some UB fallout when handing
unknown platforms or malformed input files.
This should fix the sanitizer bots.
llvm-svn: 347836
Add the required target triples to LLVMSupport to support Hurd
in LLVM (formally `pc-hurd-gnu`).
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54378
llvm-svn: 347832
Summary:
A signed comparison of i1 values produces the opposite result to an unsigned one if the condition code
includes less-than or greater-than. This is so because 1 is the most negative signed i1 number and the
most positive unsigned i1 number. The CR-logical operations used for such comparisons are non-commutative
so for signed comparisons vs. unsigned ones, the input operands just need to be swapped.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54825
llvm-svn: 347831
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
llvm-svn: 347823
This failed to select (which might be a separate bug) in
X86ISelDAGToDAG because we try to create a select node
that can be simplified away after rL347227.
This change avoids the problem by simplifying the SHRUNKBLEND
node sooner. In the test case, we manage to realize that the
true/false values of the select (SHRUNKBLEND) are the same thing,
so it simplifies away completely.
llvm-svn: 347818
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
llvm-svn: 347808
Packing the flags into one bitcode word will save effort in
adding new flags in the future.
Differential Revision: https://reviews.llvm.org/D54755
llvm-svn: 347806
Unlike most cost model functions this code makes a lot of table lookups without using the results from getTypeLegalizationCost. This means 512-bit vectors can be looked up even when the type isn't legal.
This patch adds a check around the two tables that contain 512-bit types to make sure that neither of the types would be split by type legalization. Meaning 512 bit types are illegal. I wanted to write this in a somewhat generic way that uses type legalization query hooks. But if prefered, I can switch to just using is512BitVector and the subtarget feature.
Differential Revision: https://reviews.llvm.org/D54984
llvm-svn: 347786
This fixes some of scalarization costs reported for sext/zext using avx512bw. This does not fix all scalarization costs being reported. Just the worst.
I've restricted this only to combinations of types that are legal with avx512bw like v32i1/v64i1/v32i16/v64i8 and conversions between vXi1 and vXi8/vXi16 with legal vXi8/vXi16 result types.
Differential Revision: https://reviews.llvm.org/D54979
llvm-svn: 347785
Expansion of SIGN_EXTEND_INREG can create a VSRAI instruction. If there is already a VSRAI after it, we should combine them into a larger VSRAI
Differential Revision: https://reviews.llvm.org/D54959
llvm-svn: 347784
In PR39807 we incorrectly handle circumstances where calls are common'd
from conditional blocks into the parent BB. Calls that can be inlined
must always have DebugLocs, however we strip them during commoning, which
the IR verifier asserts on.
Fix this by using applyMergedLocation: it will perform the same DebugLoc
stripping of conditional Locs, but will also generate an unknown location
DebugLoc that satisfies the requirement for inlinable calls to always have
locations.
Some of the prior logic for selecting a DebugLoc is now likely redundant;
I'll generate a follow-up to remove it (involves editing more regression
tests).
Differential Revision: https://reviews.llvm.org/D54997
llvm-svn: 347782
This commit caused failures because it failed to correctly handle cases where
we hoist a phi, then hoist a use of that phi, then have to rehoist that use. We
need to make sure that we rehoist the use to _after_ the hoisted phi, which we
do by always rehoisting to the immediate dominator instead of just rehoisting
everything to the original preheader.
An option is also added to control whether control flow is hoisted, which is
off in this commit but will be turned on in a subsequent commit.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347776
This adds support in the RISCVAsmParser the storing of Subtarget feature bits to a stack so that they can be pushed/popped to enable/disable multiple features at once.
Differential Revision: https://reviews.llvm.org/D46424
Patch by Lewis Revill.
llvm-svn: 347774
Combine
sat(sat(X + C1) + C2) -> sat(X + (C1+C2))
and
sat(sat(X - C1) - C2) -> sat(X - (C1+C2))
if the sign of C1 and C2 matches.
In the unsigned case we can compute C1+C2 with saturating arithmetic,
and InstSimplify will reduce this just to the saturation value. For
the signed case, we cannot perform the simplification if the result
of the addition overflows.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347773
Canonicalize ssub.sat(X, C) to ssub.sat(X, -C) if C is constant and
not signed minimum. This will help further optimizations to apply.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347772
Always-overflow was already determined for unsigned addition, but
not subtraction. This patch establishes parity.
This allows us to perform some additional simplifications for
signed saturating subtractions.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347771
If ValueTracking can determine that the add/sub can newer overflow,
replace it with the corresponding nuw/nsw add/sub.
Additionally, for the unsigned case, if ValueTracking determines
that the add/sub always overflows, replace the result with the
saturation value.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347770
If a saturating add intrinsic has one constant argument, make sure
it is on the RHS. This will simplify further transformations.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347769
Summary:
This is a NFC as we do not import non-odr vague linkage when computing
for import list for a module.
Reviewers: tejohnson, pcc
Subscribers: inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54928
llvm-svn: 347763
Summary:
If the original reduction root instruction was vectorized, it might be
removed from the tree. It means that the insertion point may become
invalidated and the whole vectorization of the reduction leads to the
incorrect output result.
The ReductionRoot instruction must be marked as externally used so it
could not be removed. Otherwise it might cause inconsistency with the
cost model and we may end up with too optimistic optimization.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54955
llvm-svn: 347759
Before this patch, the following stores in `merge_fail` would fail to be
merged, while they would get merged in `merge_ok`:
```
void use(unsigned long long *);
void merge_fail(unsigned key, unsigned index)
{
unsigned long long args[8];
args[0] = key;
args[1] = index;
use(args);
}
void merge_ok(unsigned long long *dst, unsigned a, unsigned b)
{
dst[0] = a;
dst[1] = b;
}
```
The reason is that `getMemOpBaseImmOfs` would return false for FI base
operands.
This adds support for this.
Differential Revision: https://reviews.llvm.org/D54847
llvm-svn: 347747
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
This reverts r294500. DwarfCompileUnit::addAddressExpr uses DIEExpr
for PCOffset. In that case the expression is unrelated to thread locals
and so emitting a value of the DIEExpr does not have to always mean
emit-debug-thread-local.
llvm-svn: 347744
separate files to enable future changes.
This moves ARM and AArch64 target parsing into their
own files. They are still accessible through
TargetParser.h as before.
Several functions in AArch64 which were just forwarders to ARM
have been removed. All except AArch64::getFPUName were unused,
and that was only used in a test. Which itself was overlapping
one in ARM, so it has also been removed.
Differential revision: https://reviews.llvm.org/D53980
llvm-svn: 347741
CGF/CLGF compares an i64 register with a sign/zero extended loaded i32 value
in memory.
This patch makes such a load considered foldable and so gets a 0 cost.
Review: Ulrich Weigand
https://reviews.llvm.org/D54944
llvm-svn: 347735
AH, SH and MH costs are already covered in the cases where LHS is 32 bits and
RHS is 16 bits of memory sign-extended to i32.
As these instructions are also used when LHS is i16, this patch recognizes
that the loads will get folded then as well.
Review: Ulrich Weigand
https://reviews.llvm.org/D54940
llvm-svn: 347734
Single instructions exist for i8 and i16 comparisons of memory against a
small immediate.
This patch makes sure that if the load in these cases has a single user (the
ICmp), it gets a 0 cost (folded), and also that the ICmp gets a cost of 1.
Review: Ulrich Weigand
https://reviews.llvm.org/D54897
llvm-svn: 347733
Since byte-swapping loads and stores are supported, a 'load -> bswap' or
'bswap -> store' sequence should have the cost of one.
Review: Ulrich Weigand
https://reviews.llvm.org/D54870
llvm-svn: 347732
Summary:
This speeds up linking clang.exe/pdb with /DEBUG:GHASH by 31%, from
12.9s to 9.8s.
Symbol records are typically small (16.7 bytes on average), but we
processed them one at a time. CVSymbol is a relatively "large" type. It
wraps an ArrayRef<uint8_t> with a kind an optional 32-bit hash, which we
don't need. Before this change, each DbiModuleDescriptorBuilder would
maintain an array of CVSymbols, and would write them individually with a
BinaryItemStream.
With this change, we now add symbols that happen to appear contiguously
in bulk. For each .debug$S section (roughly one per function), we
allocate two copies, one for relocation, and one for realignment
purposes. For runs of symbols that go in the module stream, which is
most symbols, we now add them as a single ArrayRef<uint8_t>, so the
vector DbiModuleDescriptorBuilder is roughly linear in the number of
.debug$S sections (O(# funcs)) instead of the number of symbol records
(very large).
Some stats on symbol sizes for the curious:
PDB size: 507M
sym bytes: 316,508,016
sym count: 18,954,971
sym byte avg: 16.7
As future work, we may be able to skip copying symbol records in the
linker for realignment purposes if we make LLVM write them aligned into
the object file. We need to double check that such symbol records are
still compatible with link.exe, but if so, it's definitely worth doing,
since my profile shows we spend 500ms in memcpy in the symbol merging
code. We could potentially cut that in half by saving a copy.
Alternatively, we could apply the relocations *after* we iterate the
symbols. This would require some careful re-engineering of the
relocation processing code, though.
Reviewers: zturner, aganea, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54554
llvm-svn: 347687
We're already mixing this APInt with other 'unsigned' variables. This allows us to use regular comparison operators instead of needing to use APInt::ult or APInt::uge. And it removes a later conversion from APInt to unsigned.
I might be adding another combine to this function and this will probably simplify the logic required for that.
llvm-svn: 347684
InlineCost also treats them as free and the current implementation
can cause assertion failures if PHI nodes are moved outside the region
from entry BBs to the region.
It also updates the code to use the instructionsWithoutDebug iterator.
Reviewers: davidxl, davide, vsk, graham-yiu-huawei
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D54748
llvm-svn: 347683
This is skylake-avx512 with the addition of avx512vnni ISA.
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D54785
llvm-svn: 347681
Summary:
This (very specialized) function was added to enable an LLDB use case.
Now that a more generic interface (overriding of parser functions -
D52992) is available, and LLDB has been converted to use that (D54074),
the function is unused and can be removed.
Reviewers: erik.pilkington, sgraenitz, rsmith
Subscribers: mgorny, hiraditya, christof, libcxx-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54893
llvm-svn: 347670
I tried to change this, not quite realising the logic behind what we
were doing. Hopefully this comment will help the next person to come
along.
llvm-svn: 347653
It fixes a bug that doesn't update Phi inputs of the only live successor that
is in the list of block's successors more than once.
Thanks @uabelho for finding this.
Differential Revision: https://reviews.llvm.org/D54849
Reviewed By: anna
llvm-svn: 347640
If we fold the bitcast into the store we'll end up creating a truncating store to vXi1 that will get scalarized. Instead allow the bitcast to be turned into a movmsk.
We probably need to do something if the store itself is a vXi1 type, but I'll leave that til a testcase appears.
llvm-svn: 347632
Summary:
IPA is implemented as module pass which produce map from Function or Alias to
StackSafetyInfo for a single function.
From prototype by Evgenii Stepanov and Vlad Tsyrklevich.
Reviewers: eugenis, vlad.tsyrklevich, pcc, glider
Subscribers: hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D54543
llvm-svn: 347611
Summary:
Removing ncompatible attributes at indirect-call promoted callsites, not removing it results in
at least a IR verification error.
Reviewers: davidxl, xur, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54913
llvm-svn: 347605
Summary:
Analysis produces StackSafetyInfo which contains information with how allocas
and parameters were used in functions.
From prototype by Evgenii Stepanov and Vlad Tsyrklevich.
Reviewers: eugenis, vlad.tsyrklevich, pcc, glider
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54504
llvm-svn: 347603
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasExtendedReg()`.
Differential revision: https://reviews.llvm.org/D54822
llvm-svn: 347599
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
Summary:
Support for profile-driven cache prefetching (X86)
This change is part of a larger system, consisting of a cache prefetches recommender, create_llvm_prof (https://github.com/google/autofdo), and LLVM.
A proof of concept recommender is DynamoRIO's cache miss analyzer. It processes memory access traces obtained from a running binary and identifies patterns in cache misses. Based on them, it produces a csv file with recommendations. The expectation is that, by leveraging such recommendations, we can reduce the amount of clock cycles spent waiting for data from memory. A microbenchmark based on the DynamoRIO analyzer is available as a proof of concept: https://goo.gl/6TM2Xp.
The recommender makes prefetch recommendations in terms of:
* the binary offset of an instruction with a memory operand;
* a delta;
* and a type (nta, t0, t1, t2)
meaning: a prefetch of that type should be inserted right before the instrution at that binary offset, and the prefetch should be for an address delta away from the memory address the instruction will access.
For example:
0x400ab2,64,nta
and assuming the instruction at 0x400ab2 is:
movzbl (%rbx,%rdx,1),%edx
means that the recommender determined it would be beneficial for a prefetchnta instruction to be inserted right before this instruction, as such:
prefetchnta 0x40(%rbx,%rdx,1)
movzbl (%rbx, %rdx, 1), %edx
The workflow for prefetch cache instrumentation is as follows (the proof of concept script details these steps as well):
1. build binary, making sure -gmlt -fdebug-info-for-profiling is passed. The latter option will enable the X86DiscriminateMemOps pass, which ensures instructions with memory operands are uniquely identifiable (this causes ~2% size increase in total binary size due to the additional debug information).
2. collect memory traces, run analysis to obtain recommendations (see above-referenced DynamoRIO demo as a proof of concept).
3. use create_llvm_prof to convert recommendations to reference insertion locations in terms of debug info locations.
4. rebuild binary, using the exact same set of arguments used initially, to which -mllvm -prefetch-hints-file=<file> needs to be added, using the afdo file obtained at step 3.
Note that if sample profiling feedback-driven optimization is also desired, that happens before step 1 above. In this case, the sample profile afdo file that was used to produce the binary at step 1 must also be included in step 4.
The data needed by the compiler in order to identify prefetch insertion points is very similar to what is needed for sample profiles. For this reason, and given that the overall approach (memory tracing-based cache recommendation mechanisms) is under active development, we use the afdo format as a syntax for capturing this information. We avoid confusing semantics with sample profile afdo data by feeding the two types of information to the compiler through separate files and compiler flags. Should the approach prove successful, we can investigate improvements to this encoding mechanism.
Reviewers: davidxl, wmi, craig.topper
Reviewed By: davidxl, wmi, craig.topper
Subscribers: davide, danielcdh, mgorny, aprantl, eraman, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54052
llvm-svn: 347596
It's possible in some cases to have a restore present
without a corresponding spill. Due to an apparent bug
in D54366 <https://reviews.llvm.org/D54366>, only the
restore for a register was emitted. It's probably
always a bug for this to happen, but due to how SGPR
spilling is implemented, this makes the issues appear
worse than it is.
llvm-svn: 347595
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
Summary:
The old legacy LTO API had a separate cache key computation, which was
a subset of the cache key computation in the new LTO API (from what I
can tell this is largely just because certain features such as CFI,
dsoLocal, etc are only utilized via the new LTO API). However, having
separate computations is unnecessary (much of the code is duplicated),
and can lead to bugs when adding new optimizations if both cache
computation algorithms aren't updated properly - it's much easier to
maintain if we have a single facility.
This patch refactors the old LTO API code to use the cache key
computation from the new LTO API. To do this, we set up an lto::Config
object and fill in the fields that the old LTO was hashing (the others
will just use the defaults).
There are two notable changes:
- I added a Freestanding flag to the LTO Config. Currently this is only
used by the legacy LTO API. In the patch that added it (D30791) I had
asked about adding it to the new LTO API, but it looks like that was not
addressed. This should probably be discussed as a follow up to this
change, as it is orthogonal.
- The legacy LTO API had some code that was hashing the GUID of all
preserved symbols defined in the module. I looked back at the history of
this (which was added with the original hashing in the legacy LTO API in
D18494), and there is a comment in the review thread that it was added
in preparation for future internalization. We now do the internalization
of course, and that is handled in the new LTO API cache key computation
by hashing the recorded linkage type of all defined globals. Therefore I
didn't try to move over and keep the preserved symbols handling.
Reviewers: steven_wu, pcc
Subscribers: mehdi_amini, inglorion, eraman, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D54635
llvm-svn: 347592
We might find a target specific node that needs to be unwrapped after we look through an add/or. Otherwise we get inconsistent results if one pointer is just X86WrapperRIP and the other is (add X86WrapperRIP, C)
Differential Revision: https://reviews.llvm.org/D54818
llvm-svn: 347591
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
ParentTy is never used other than an assignment, and since it is a
pointer, there is no side effect. Some versions of GCC notice and warn
on this.
Change-Id: I37dc1a18c7b58040419afb803621de13d8904a8f
llvm-svn: 347581
Summary:
STATEPOINT records its args' locations on stack relative to SP.
If the SP is changed, take that into account.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D53603
llvm-svn: 347569
This source file has not been needed since r346522 and was triggering diagnostics in MSVC about an object file which exports no public symbols (LNK4221).
llvm-svn: 347565
Add support for funnel shifts to the DemandedBits analysis. The
demanded bits of the first two operands can be determined if the
shift amount is constant. The demanded bits of the third operand
(shift amount) can be determined if the bitwidth is a power of two.
This is basically the same functionality as implemented in D54869
and D54478, but for DemandedBits rather than InstCombine.
Differential Revision: https://reviews.llvm.org/D54876
llvm-svn: 347561
We have these 2 "isDesirable" promotion hooks (I'm not sure why we need both of them, but that's
independent of this patch), and we can adjust them to promote "mul i8 X, C" to i32. Then, all of
our existing LEA and other multiply expansion magic happens as it would for i32 ops.
Some of the test diffs show that we could end up with an actual 32-bit mul instruction here
because we choose not to expand to simpler ops. That instruction could be slower depending on the
subtarget. On the plus side, this means we don't need a separate instruction to load the constant
operand and possibly an extra instruction to move the result. If we need to tune mul i32 further,
we could add a later transform that tries to shrink it back to i8 based on subtarget timing.
I did not bother to duplicate all of the 32-bit test file RUNs and target settings that exist to
test whether LEA expansion is cheap or not. The diffs here assume a default target, so that means
LEA is generally cheap.
Differential Revision: https://reviews.llvm.org/D54803
llvm-svn: 347557
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
Both zext and sext are currently allowed during the search for narrow
sequences and sexts operands are later added to the mac candidates.
But operands of muls are also added, without checking whether they're
sext or zext, which means we can generate a signed smlad when we
shouldn't.
Differential Revision: https://reviews.llvm.org/D54790
llvm-svn: 347542
This reverts commits r347532. Forget add the option
-mtriple powerpc64-unknown-linux-gnu. So other platform is error except
for PowerPC.
llvm-svn: 347534
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 347532
Summary:
getLastAccessedTime() and getLastModificationTime() provided times in nanoseconds but with only 1 second resolution, even when the underlying file system could provide more precise times than that.
These changes add sub-second precision for unix platforms that support improved precision.
Also add some comments to make sure people are aware that the resolution of times can vary across different file systems.
Reviewers: labath, zturner, aaron.ballman, kristina
Reviewed By: aaron.ballman, kristina
Subscribers: lebedev.ri, mgorny, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54826
llvm-svn: 347530
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
OriginalOp of a Predicate refers to the original IR value,
before renaming. While solving in IPSCCP, we have to use
the operand of the ssa_copy instead, to avoid missing
updates for nested conditions on the same IR value.
Fixes PR39772.
llvm-svn: 347524
rL347502 moved the null sibling, so we should group all of these
together. I'm not sure why these aren't methods of the SDValue
class itself, but that's another patch if that's possible.
llvm-svn: 347523
Support funnel shifts in InstCombine demanded bits simplification.
If the shift amount is constant, we can determine both the demanded
bits of the operands, as well as the known bits of the result.
If one of the operands has no demanded bits, it will be replaced
by undef and the funnel shift will be simplified into a simple shift
due to the simplifications added in D54778.
Differential Revision: https://reviews.llvm.org/D54869
llvm-svn: 347515
This changeset is modeled after Intel's submission for SVML. It enables
trigonometry functions vectorization via SLEEF: http://sleef.org/.
* A new vectorization library enum is added to TargetLibraryInfo.h: SLEEF.
* A new option is added to TargetLibraryInfoImpl - ClVectorLibrary: SLEEF.
* A comprehensive test case is included in this changeset.
* In a separate changeset (for clang), a new vectorization library argument is
added to -fveclib: -fveclib=SLEEF.
Trigonometry functions that are vectorized by sleef:
acos
asin
atan
atanh
cos
cosh
exp
exp2
exp10
lgamma
log10
log2
log
sin
sinh
sqrt
tan
tanh
tgamma
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D53927
llvm-svn: 347510
The following simplifications are implemented:
* `fshl(X, 0, C) -> shl X, C%BW`
* `fshl(X, undef, C) -> shl X, C%BW` (assuming undef = 0)
* `fshl(0, X, C) -> lshr X, BW-C%BW`
* `fshl(undef, X, C) -> lshr X, BW-C%BW` (assuming undef = 0)
* `fshr(X, 0, C) -> shl X, (BW-C%BW)`
* `fshr(X, undef, C) -> shl X, BW-C%BW` (assuming undef = 0)
* `fshr(0, X, C) -> lshr X, C%BW`
* `fshr(undef, X, C) -> lshr, X, C%BW` (assuming undef = 0)
The simplification is only performed if the shift amount C is constant,
because we can explicitly compute C%BW and BW-C%BW in this case.
Differential Revision: https://reviews.llvm.org/D54778
llvm-svn: 347505
...and use them to avoid creating obviously undef values as
discussed in the post-commit thread for r347478.
The diffs in vector div/rem show that we were missing real
optimizations by creating bogus shift nodes.
llvm-svn: 347502
In ARMOperand::print:
- Print human-readable register names, instead of numbers.
- Print the correct names for IT condition masks (these were in the wrong order
before).
- Print all parts of memory operands, not just the base register.
This makes the output of llvm-mc -show-inst-operands more readable.
Differential revision: https://reviews.llvm.org/D54850
llvm-svn: 347494
When removing edges, we also update Phi inputs and may end up removing
a Phi if it has only one input. We should not do it for edges that leave the current
loop because these Phis are LCSSA Phis and need to be preserved.
Thanks @dmgreen for finding this!
Differential Revision: https://reviews.llvm.org/D54841
llvm-svn: 347484
This code takes a truncate, fp_to_int, or int_to_fp with a legal result type and an input type that needs to be split and enlarges the elements in the result type before doing the split. Then inserts a follow up truncate or fp_round after concatenating the two halves back together.
But if the input type of the original op is being split on its way to ultimately being scalarized we're just going to end up building a vector from scalars and then truncating or rounding it in the vector register. Seems kind of silly to enlarge the result element type of the operation only to end up with scalar code and then building a vector with large elements only to make the elements smaller again in the vector register. Seems better to just try to get away producing smaller result types in the scalarized code.
The X86 test case that changes is a pretty contrived test case that exists because of a bug we used to have in our AVG matching code. I think the code is better now, but its not realistic anyway.
llvm-svn: 347482
SplitVecOp_TruncateHelper tries to introduce a multilevel truncate to avoid scalarization. But if splitting the result type would still be a legal type we don't need to do that.
The comment block at the top of the function implied that this was already implemented. I looked back through the history and it doesn't look to have ever been checked.
llvm-svn: 347479
We fail to canonicalize IR this way (prefer 'not' ops to arbitrary 'xor'),
but that would not matter without this patch because DAGCombiner was
reversing that transform. I think we need this transform in the backend
regardless of what happens in IR to catch cases where the shift-xor
is formed late from GEP or other ops.
https://rise4fun.com/Alive/NC1
Name: shl
Pre: (-1 << C2) == C1
%shl = shl i8 %x, C2
%r = xor i8 %shl, C1
=>
%not = xor i8 %x, -1
%r = shl i8 %not, C2
Name: shr
Pre: (-1 u>> C2) == C1
%sh = lshr i8 %x, C2
%r = xor i8 %sh, C1
=>
%not = xor i8 %x, -1
%r = lshr i8 %not, C2
https://bugs.llvm.org/show_bug.cgi?id=39657
llvm-svn: 347478
A consequence of r347274 is that SCALAR_TO_VECTOR can be converted into
BUILD_VECTOR by SimplifyDemandedBits, but LowerBUILD_VECTOR can turn
BUILD_VECTOR into SCALAR_TO_VECTOR so we get an infinite loop.
Fix this by making LowerBUILD_VECTOR not do this transformation for those
vectors that would get transformed back, i.e. BUILD_VECTOR of a single-element
constant vector. Doing that means we get a DUP, which we then need to recognise
in ISel as a copy.
llvm-svn: 347456
a normal base class that provides all common "call" functionality.
This merges two complex CRTP mixins for the common "call" logic and
common operand bundle logic into a single, normal base class of
`CallInst` and `InvokeInst`. Going forward, users can typically
`dyn_cast<CallBase>` and use the resulting API. No more need for the
`CallSite` wrapper. I'm planning to migrate current usage of the wrapper
to directly use the base class and then it can be removed, but those are
simpler and much more incremental steps. The big change is to introduce
this abstraction into the type system.
I've tried to do some basic simplifications of the APIs that I couldn't
really help but touch as part of this:
- I've tried to organize the attribute API and bundle API into groups to
make understanding the API of `CallBase` easier. Without this,
I wasn't able to navigate the API sanely for all of the ways I needed
to modify it.
- I've added what seem like more clear and consistent APIs for getting
at the called operand. These ended up being especially useful to
consolidate the *numerous* duplicated code paths trying to do this.
- I've largely reworked the organization and implementation of the APIs
for computing the argument operands as they needed to change to work
with the new subclass approach.
To minimize any cost associated with this abstraction, I've moved the
operand layout in memory to store the called operand last. This makes
its position relative to the end of the operand array the same,
regardless of the subclass. It should make it much cheaper to reference
from the `CallBase` abstraction, and this is likely one of the most
frequent things to query.
We do still pay one abstraction penalty here: we have to branch to
determine whether there are 0 or 2 extra operands when computing the end
of the argument operand sequence. However, that seems both rare and
should optimize well. I've implemented this in a way specifically
designed to allow it to optimize fairly well. If this shows up in
profiles, we can add overrides of the relevant methods to the subclasses
that bypass this penalty. It seems very unlikely that this will be an
issue as the code was *already* dealing with an ever present abstraction
of whether or not there are operand bundles, so this isn't the first
branch to go into the computation.
I've tried to remove as much of the obvious vestigial API surface of the
old CRTP implementation as I could, but I suspect there is further
cleanup that should now be possible, especially around the operand
bundle APIs. I'm leaving all of that for future work in this patch as
enough things are changing here as-is.
One thing that made this harder for me to reason about and debug was the
pervasive use of unsigned values in subtraction and other arithmetic
computations. I had to debug more than one unintentional wrap. I've
switched a few of these to use `int` which seems substantially simpler,
but I've held back from doing this more broadly to avoid creating
confusing divergence within a single class's API.
I also worked to remove all of the magic numbers used to index into
operands, putting them behind named constants or putting them into
a single method with a comment and strictly using the method elsewhere.
This was necessary to be able to re-layout the operands as discussed
above.
Thanks to Ben for reviewing this (somewhat large and awkward) patch!
Differential Revision: https://reviews.llvm.org/D54788
llvm-svn: 347452
Implement getIntrinsicInstrCost() and return costs reflecting that bswap can
be done with a vperm per vector register.
Review: Ulrich Weigand
https://reviews.llvm.org/D54789
llvm-svn: 347445
GCC does it this way, and we have to be consistent. This includes
stdcall and fastcall functions with suffixes. I confirmed that a
fastcall function named "foo" ends up in ".text$foo", not
".text$@foo@8".
Based on a patch by Andrew Yohn!
Fixes PR39218.
Differential Revision: https://reviews.llvm.org/D54762
llvm-svn: 347431
This is further cleanup for PPCMCCodeEmitter. The class had been contained
within the cpp file alone. Now it has been split up between a header file and
a cpp file which allows other classes to make use of the functions in this class
if required.
llvm-svn: 347428
This transform needs to be limited.
We are converting to a constant pool load very early, and we
are turning loads that are independent of the select condition
(and therefore speculatable) into a dependent non-speculatable
load.
We may also be transferring a condition code from an FP register
to integer to create that dependent load.
llvm-svn: 347424
The MergeFunctions pass was originally intended to emit aliases
instead of thunks where possible (unnamed_addr). However, for a
long time this functionality was behind a flag hardcoded to false,
bitrotted and was eventually removed in r309313.
Originally the functionality was first disabled in r108417 due to
lack of support for aliases in Mach-O. I believe that this is no
longer the case nowadays, but not really familiar with this area.
In the interest of being conservative, this patch reintroduces the
aliasing functionality behind a default disabled -mergefunc-use-aliases
flag.
Differential Revision: https://reviews.llvm.org/D53285
llvm-svn: 347407
R_MIPS_JALR/R_MICROMIPS_JALR can now be parsed in .s files and emitted to .o.
They are still not generated with JALR.
Differential revision: https://reviews.llvm.org/D54721
llvm-svn: 347398
Currently, expressions like
.reloc 1f, R_MIPS_JALR, foo
1: nop
are not allowed, ie. an offset in .reloc can only be absolute value.
This patch adds support for labels as offsets.
If offset is a forward declared label, MCObjectStreamer keeps the fixup locally
and adds it to the fixups vector after the label (and its offset) is defined.
label+number is not supported yet.
Differential revision: https://reviews.llvm.org/D53990
llvm-svn: 347397
Add missing linkage from Nios2CodeGen library to Nios2AsmPrinter
library. The missing dependency causes shared-lib build to fail with
the following reason:
lib/Target/Nios2/CMakeFiles/LLVMNios2CodeGen.dir/Nios2AsmPrinter.cpp.o: In function `(anonymous namespace)::Nios2AsmPrinter::PrintAsmMemoryOperand(llvm::MachineInstr const*, unsigned int, unsigned int, char const*, llvm::raw_ostream&)':
Nios2AsmPrinter.cpp:(.text._ZN12_GLOBAL__N_115Nios2AsmPrinter21PrintAsmMemoryOperandEPKN4llvm12MachineInstrEjjPKcRNS1_11raw_ostreamE+0x2b): undefined reference to `llvm::Nios2InstPrinter::getRegisterName(unsigned int)'
lib/Target/Nios2/CMakeFiles/LLVMNios2CodeGen.dir/Nios2AsmPrinter.cpp.o: In function `(anonymous namespace)::Nios2AsmPrinter::PrintAsmOperand(llvm::MachineInstr const*, unsigned int, unsigned int, char const*, llvm::raw_ostream&)':
Nios2AsmPrinter.cpp:(.text._ZN12_GLOBAL__N_115Nios2AsmPrinter15PrintAsmOperandEPKN4llvm12MachineInstrEjjPKcRNS1_11raw_ostreamE+0x97): undefined reference to `llvm::Nios2InstPrinter::getRegisterName(unsigned int)'
collect2: error: ld returned 1 exit status
Differential Revision: https://reviews.llvm.org/D47810
llvm-svn: 347387
LVI was symbolically executing binary operators only when the RHS was
constant, missing the case where we have a ConstantRange for the RHS,
but not an actual constant. Tested using check-all and by
bootstrapping. Compile time is not impacted measurably.
Differential Revision: https://reviews.llvm.org/D19859
llvm-svn: 347379
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
These are AVX2 instructions, but have been incorrectly marked in tablegen for a while. This wasn't a problem until r346784 switched the patterns to use target independent ISD opcodes. This made the patterns visible to fast isel.
Fixes PR39733
llvm-svn: 347375
We can't guarantee that demanded bits passing through the vector shuffle won't cause the AND in front of this to be removed. This would prevent the PACKUS from being matched during shuffle lowering.
Unfortunately, this adds a packuswb to one of the vector-reduce-mul.ll tests since we were removing the shuffle via SimplifyDemandedVectorElts. We appear to have similar issues with vpmovwb on the same test case on other targets.
llvm-svn: 347361
This is another step in vector narrowing - a follow-up to D53784
(and hoping to eventually squash potential regressions seen in
D51553).
The x86 test diffs are wins, but the AArch64 diff is probably not.
That problem already exists independent of this patch (see PR39722), but it
went unnoticed in the previous patch because there were no regression tests
that showed the possibility.
The x86 diff in i64-mem-copy.ll is close. Given the frequency throttling
concerns with using wider vector ops, an extra extract to reduce vector
width is the right trade-off at this level of codegen.
Differential Revision: https://reviews.llvm.org/D54392
llvm-svn: 347356
When you have a member function with a ref-qualifier, for example:
struct Foo {
void Func() &;
void Func2() &&;
};
clang-cl was not emitting this information. Doing so is a bit
awkward, because it's not a property of the LF_MFUNCTION type, which
is what you'd expect. Instead, it's a property of the this pointer
which is actually an LF_POINTER. This record has an attributes
bitmask on it, and our handling of this bitmask was all wrong. We
had some parts of the bitmask defined incorrectly, but importantly
for this bug, we didn't know about these extra 2 bits that represent
the ref qualifier at all.
Differential Revision: https://reviews.llvm.org/D54667
llvm-svn: 347354
This is for compatibility with MSVC, which also marks this pointers
as being const-qualified.
Fixes llvm.org/pr36526
Differential Revision: https://reviews.llvm.org/D54736
llvm-svn: 347353
Previously we emitted to separate shuffles, one for unpcklbw and one for unpcklwd. Instead emit a single shuffle equivalent to both of the original shuffles. Shuffle lowering seems able to handle it. This avoids a bitcast between the two shuffles which seems helpful to DAG combine.
Remove the custom type legalization for v8i8->v8i32. I had put that in to avoid some almost duplicate punpcklbw instructions I was seeing, but this lowering change seems to fix that. It also fixes some duplicate shuffles seen in vector-sext.ll
llvm-svn: 347348
Rather than assuming that `tempRet0` exists in linear memory only assume
the getter/setter functions exist. This avoids conflicting with
binaryen which declares a wasm global for this purpose and defines it's
own getter and setter for that.
The other advantage of doing things this way is that it leaving
it up to the linker/finalizer to decide how to actually store this
temporary. As it happens binaryen uses a wasm global which is more
appropriate since it is thread safe.
This also allows us to change the way this is stored in the future
(memory, TLS memory, wasm global) without modifying LLVM.
This is part of a 4 part change:
LLVM: https://reviews.llvm.org/D53240
fastcomp: https://github.com/kripken/emscripten-fastcomp/pull/237
emscripten: https://github.com/kripken/emscripten/pull/7358
binaryen: https://github.com/WebAssembly/binaryen/pull/1709
Differential Revision: https://reviews.llvm.org/D53240
llvm-svn: 347340
Support saturating add/sub in constant folding, based on the APInt methods introduced in D54332.
Patch by: @nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54531
llvm-svn: 347328
This patch fixes PR39695.
The original LoopSink only considers memory alias in loop body. But PR39695 shows that instructions following sink candidate in preheader should also be checked. This is a conservative patch, it simply adds whole preheader block to alias set. It may lose some optimization opportunity, but I think that is very rare because: 1 in the most common case st/ld to the same address, the load should already be optimized away. 2 usually preheader is not very large.
Differential Revision: https://reviews.llvm.org/D54659
llvm-svn: 347325
This adds the sadd_sat, uadd_sat, ssub_sat, usub_sat methods for performing saturating additions and subtractions to APInt.
Split out from D54237.
Patch by: nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54332
llvm-svn: 347324
This uncovered an off-by-one typo in SimplifyDemandedVectorElts's INSERT_SUBVECTOR handling as its bounds check was bailing on safe indices.
llvm-svn: 347313
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
This patch is for STWU/STWUX (IIC_LdStStoreUpd ) for P8.
Since there are already multiple IIC for store update, this patch also merge
IIC_LdStSTDU/IIC_LdStStoreUpd to IIC_LdStSTU
IIC_LdStSTDUX to IIC_LdStSTUX
and we add a new testcase in https://reviews.llvm.org/D54699 to show the difference.
Differential Revision: https://reviews.llvm.org/D54700
llvm-svn: 347311
Pull out getPackDemandedElts demanded elts remapping helper from computeKnownBitsForTargetNode and use in computeKnownBits/ComputeNumSignBits.
llvm-svn: 347303
For bitcast nodes from larger element types, add the ability for SimplifyDemandedVectorElts to call SimplifyDemandedBits by merging the elts mask to a bits mask.
I've raised https://bugs.llvm.org/show_bug.cgi?id=39689 to deal with the few places where SimplifyDemandedBits's lack of vector handling is a problem.
Differential Revision: https://reviews.llvm.org/D54679
llvm-svn: 347301
Previously if V2 was unused we ended up using V1 for both inputs as part of the code that follows the new code. By using lowerVectorShuffleWithUNPCK we keep the undef nature of V2 in the output.
As near as I can tell this makes v16i8 behavior consistent with every other VT now.
This does mean that we give the register allocator freedom to fill in random registers now and create false dependencies. But like I said we're already doing that for other types.
llvm-svn: 347296
getZeroVector produces a specifically canonicalized zero vector, but we can just let DAG legalization take care of it.
The test changes are because MULH lowering happens later than it should and this change gave us the opportunity to constant fold away a multiply during a DAG combine before the build_vector got legalized with a bitcast.
llvm-svn: 347290
The initial version of patch lacked Phi nodes updates in destinations of removed
edges. This version contains this update and tests on this situation.
Differential Revision: https://reviews.llvm.org/D54021
llvm-svn: 347289
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
Summary:
We already support this for scalars, but it was explicitly disabled for vectors. In the updated test cases this allows us to see the upper bits are zero to use less multiply instructions to emulate a 64 bit multiply.
This should help with this ispc issue that a coworker pointed me to https://github.com/ispc/ispc/issues/1362
Reviewers: spatel, efriedma, RKSimon, arsenm
Reviewed By: spatel
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D54725
llvm-svn: 347287
PointerAttributes is a bitwise-or of several other fields, each of
which is already printed on its own line with a better explanation.
So this doesn't really help much.
llvm-svn: 347275
Put 'static' on three functions in an anonymous namespace as per our
coding style.
Remove the 'namespace llvm {}' around the .cpp file and explicitly
declare the free function 'llvm::optimizeGlobalCtorsList' in 'llvm::'.
I prefer this style for free functions because the compiler will error
out if the .h and .cpp files don't agree on the function name or
prototype.
llvm-svn: 347269
This works if DAG combiner is enabled, but without combining
we cannot select scalar_to_vector of <2 x half> and <2 x i16>.
Differential Revision: https://reviews.llvm.org/D54718
llvm-svn: 347259
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
llvm-svn: 347256
Consistently use (!LegalOperations || isOperationLegalOrCustom) for all node pairs.
Differential Revision: https://reviews.llvm.org/D53478
llvm-svn: 347255
As discussed on D53794, for float types with ranges smaller than the destination integer type, then we should be able to just use a regular FP_TO_SINT opcode.
I thought we'd need to provide MSA test cases for very small integer types as well (fp16 -> i8 etc.), but it turns out that promotion will kick in so they're unnecessary.
Differential Revision: https://reviews.llvm.org/D54703
llvm-svn: 347251
We're seeing some issues internally where we sent some intrinsics into the cost model that the getTypeLegalizationCost call fails on, but X86 specific tables don't care about. Our base class implementation takes care of them. We'd just like X86 backend to ignore them.
This patch makes sure the switch returned something X86 cares about and skips the table lookups and type legalization call if not. Probably more efficient too since we don't go scanning the tables for every intrinsic we could possibly see.
Differential Revision: https://reviews.llvm.org/D54711
llvm-svn: 347248
SSE PSHUFB vector ctlz lowering works at the i4 nibble level. As detailed in PR39703, we were masking the lower nibble off but we only actually use it in the case where the upper nibble is known to be zero, making it safe to remove the mask and save an instruction.
Differential Revision: https://reviews.llvm.org/D54707
llvm-svn: 347242
Previously we split the vectors in half to allow the two halves to be any extended then concatenated the results back together.
This patch instead instead extends the v16i8 sse algorithm to extend half of each 128-bit lane using punpcklbw/punpckhbw. Multiplies all the low half lanes and high half lanes together in separate operations. Then merges the half lane results back together using packuswb.
Unfortunately, some of the cases in vector-reduce-mul.ll regress because we aren't narrowing the vector width of the multiplies as we reduce. The splitting was somewhat making up for that before by causing halves to be discarded after the split.
Differential Revision: https://reviews.llvm.org/D54668
llvm-svn: 347240
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
This allows to avoid scratch use or indirect VGPR addressing for
small vectors.
Differential Revision: https://reviews.llvm.org/D54606
llvm-svn: 347231
Summary:
This makes it easier/cleaner to generate a single signature from
this directive. Also:
- Adds the symbol name, such that we don't depend on the location
of this directive anymore.
- Actually constructs the signature in the assembler, and make the
assembler own it.
- Refactor the use of MVT vs ValType in the streamer and assembler
to require less conversions overall.
- Changed 700 or so tests to use it.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, eraman, aheejin, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D54652
llvm-svn: 347228
Summary:
AMDGPUAsmPrinter has a getSTI function that derives a GCNSubtarget from the
TM. However, this means that overridden target features are not detected and can
result in incorrect behaviour.
Switch to using STM which is a GCNSubtarget derived from the MF (used elsewhere
in the same function).
Change-Id: Ib6328ad667b7fcdc87e9c06344e59859207db9b0
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54301
llvm-svn: 347221
Summary:
Currently, when vectorizing stores to uniform addresses, the only
instance we prevent vectorization is if there are multiple stores to the
same uniform address causing an unsafe dependency.
This patch teaches LAA to avoid vectorizing loops that have an unsafe
cross-iteration dependency between a load and a store to the same uniform address.
Fixes PR39653.
Reviewers: Ayal, efriedma
Subscribers: rkruppe, llvm-commits
Differential Revision: https://reviews.llvm.org/D54538
llvm-svn: 347220
Legacy loop pass manager is issuing "Made Modification" message after each Loop Pass
run, however condition for issuing it is accumulated among all the runs.
That leads to confusing 'modification' messages as soon as the first modification is done.
Changing condition to be "current pass made modifications", similar to how
it is being done in all other pass managers.
llvm-svn: 347215
This patch defines an interleaved-load-combine pass. The pass searches
for ShuffleVector instructions that represent interleaved loads. Matches are
converted such that they will be captured by the InterleavedAccessPass.
The pass extends LLVMs capabilities to use target specific instruction
selection of interleaved load patterns (e.g.: ld4 on Aarch64
architectures).
Differential Revision: https://reviews.llvm.org/D52653
llvm-svn: 347208
Truncs are treated as sources if their produce a value of the same
type as the one we currently trying to promote. Truncs used to be
considered as a sink if their operand was the same value type.
We now allow smaller types in the search, so we should search through
truncs that produce a smaller value. These truncs can then be
converted to an AND mask.
This leaves sinks as being:
- points where the value in the register is being observed, such as
an icmp, switch or store.
- points where value types have to match, such as calls and returns.
- zext are included to ease the transformation and are generally
removed later on.
During this change, it also became apart from truncating sinks was
broken: if a sink used a source, its type information had already
been lost by the time the truncation happens. So I've changed the
method of caching the type information.
Differential Revision: https://reviews.llvm.org/D54515
llvm-svn: 347191
The general approach taken is to make note of loop invariant branches, then when
we see something conditional on that branch, such as a phi, we create a copy of
the branch and (empty versions of) its successors and hoist using that.
This has no impact by itself that I've been able to see, as LICM typically
doesn't see such phis as they will have been converted into selects by the time
LICM is run, but once we start doing phi-to-select conversion later it will be
important.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347190
There is no variable-length shifts on MSP430. Therefore
"eat" 8 bits of shift via bswap & ext.
Path by Kristina Bessonova!
Differential Revision: https://reviews.llvm.org/D54623
llvm-svn: 347187
The shift requires a copy to avoid clobbering a register. Comparing with 0 uses an xor to produce 0 that will be overwritten with the compare results. So still requires 2 instructions, but should be one byte shorter since it doesn't need to encode an immediate.
llvm-svn: 347185
This patch introduces infrastructure and the simplest case for constant-folding
of branch and switch instructions within loop into unconditional branches.
It is useful as a cleanup for such passes as loop unswitching that sometimes
produce such branches.
Only the simplest case supported in this patch: after the folding, no block
should become dead or stop being part of the loop. Support for more
sophisticated cases will go separately in follow-up patches.
Differential Revision: https://reviews.llvm.org/D54021
Reviewed By: anna
llvm-svn: 347183
Every Analysis pass has a get method that returns a reference of the Result of
the Analysis, for example, BlockFrequencyInfo
&BlockFrequencyInfoWrapperPass::getBFI(). I believe that
ProfileSummaryInfo::getPSI() is the only exception to that, as it was returning
a pointer.
Another change is renaming isHotBB and isColdBB to isHotBlock and isColdBlock,
respectively. Most methods use BB as the argument of variable names while
methods usually refer to Basic Blocks as Blocks, instead of BB. For example,
Function::getEntryBlock, Loop:getExitBlock, etc.
I also fixed one of the comments.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D54669
llvm-svn: 347182
Previously we used an arithmetic shift right by 31, but that requires a copy to preserve the input. So we might as well materialize a zero and compare to it since the comparison will overwrite the register that contains the zeros. This should be one byte shorter.
llvm-svn: 347181
Leave just the v4i8->v4i64 and v8i8->v8i64, but only enable them on pre-sse4.1 targets when 64-bit mode is enabled. In those cases we end up creating sext loads that get scalarized to code that looks better than what we get from loading into a vector register and doing a multiple step sign extend using unpacks and shifts.
llvm-svn: 347180
Pre-SSE4.1 sext_invec for v2i64 is complicated because we don't have a v2i64 sra instruction. So instead we sign extend to i32 using unpack and sra, then copy the elements and do a v4i32 sra to fill with sign bits, then interleave the i32 sign extend and the sign bits. So really we're doing to two sign extends but only using half of the v4i32 intermediate result.
When the result is more than 128 bits, default type legalization would prefer to split the destination type all the way down to v2i64 with shuffles followed by v16i8/v8i16->v2i64 sext_inreg operations. This results in more instructions than necessary because we are only utilizing the lower 2 elements of the v4i32 intermediate result. Instead we can custom split a v4i8/v4i16->v4i64 sign_extend. Then we can sign extend v4i8/v4i16->v4i32 invec producing a full v4i32 result. Create the sign bit vector as a v4i32 then split and interleave with the sign bits using an punpackldq and punpackhdq.
llvm-svn: 347176
If we widen illegal types instead of promoting, we should be able to rely on the type legalizer to create the vector_inreg operations for us with some caveats.
This patch disables combineToExtendVectorInReg when we are using widening.
I've enabled custom legalization for v8i8->v8i64 extends under avx512f since the type legalizer would want to create a vector_inreg with a v64i8 input type which isn't legal without avx512bw. So we go to v16i8 with custom code using the relaxation of rules we get from D54346.
I've also enable custom legalization of v8i64 and v16i32 operations with with AVX. When the input type is 128 bits, the default splitting legalization would extend first 128->256, then do the a split to two 128 pieces. Extend each half to 256 and then concat the result. The custom legalization I've added instead uses a 128->256 bit vector_inreg extend that only reads the lower 64-bits for the low half of the split. Then shuffles the high 64-bits to the low 64-bits and does another vector_inreg extend.
llvm-svn: 347172
Summary: This is an improvement over the two pshufbs and punpcklqdq we'd get otherwise.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54671
llvm-svn: 347171
Sadly, this duplicates (twice) the logic from InstSimplify. There
might be some way to at least share the DAG versions of the code,
but copying the folds seems to be the standard method to ensure
that we don't miss these folds.
Unlike in IR, we don't run DAGCombiner to fixpoint, so there's no
way to ensure that we do these kinds of simplifications unless the
code is repeated at node creation time and during combines.
There were other tests that would become worthless with this
improvement that I changed as pre-commits:
rL347161
rL347164
rL347165
rL347166
rL347167
I'm not sure how to salvage the remaining tests (diffs in this patch).
So the x86 tests verify that the new code is working as intended.
The AMDGPU test is actually similar to my motivating case: we have
some undef value that has survived to machine IR in an x86 test, and
then it gets folded in some weird way, or we crash if we don't transfer
the undef flag. But we would have been better off never getting to that
point by doing these simplifications.
This will lead back to PR32023 someday...
https://bugs.llvm.org/show_bug.cgi?id=32023
llvm-svn: 347170
Refactor towards making this recursive (necessary for PR38243 rotation splat detection).
IsSplatVector returns the original vector source of the splat and the splat index.
GetSplatValue returns the scalar splatted value as an extraction from IsSplatVector.
llvm-svn: 347168
We were using the 'normalized' shuffle mask from resolveTargetShuffleInputs, which replaces zero/undef inputs with sentinel values. For SimplifyDemandedVectorElts we need the raw mask so we can correctly demand those 'zero' inputs that got normalized away, this requires an extra bit of logic to locally normalize undef inputs.
llvm-svn: 347158
The zero extend will require two stages of unpacks to implement. So its better to shrink the multiply using pmullw and then extend that result back to v4i32 using a single unpack.
llvm-svn: 347149
Fix all of the missing debug location errors in CVP found by debugify.
This includes the missing-location-after-udiv-truncation case described
in llvm.org/PR38178.
llvm-svn: 347147
The #if check around the statistics computation gave an error about
the statistic being an unused variable. Instead, guard with
AreStatisticsEnabled().
llvm-svn: 347146
Summary:
Follow up to D49362 ([ThinLTO] Internalize read only globals). Add a
statistic on the number of read only variables (only counting live
variables since dead variables will be dropped anyway).
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54642
llvm-svn: 347145
Especially for symbolizer it can be efficient to have to search through
the entire index when it isn't needed - llvm-symbolizer looks up only a
few CUs & already has an index available in getUnitForEntry, once it's
passed down to DWARFUnitHeader::extract then there's no need for it to
call getFromOffset.
llvm-svn: 347134
This tries to force the result type to vXi32 followed by a truncate. This can help avoid scalarization that would otherwise occur.
There's some annoying examples of an avx512 truncate instruction followed by a packus where we should really be able to just use one truncate. But overall this is still a net improvement.
llvm-svn: 347105
We need to control exponential behavior of loop-unswitch so we do not get
run-away compilation.
Suggested solution is to introduce a multiplier for an unswitch cost that
makes cost prohibitive as soon as there are too many candidates and too
many sibling loops (meaning we have already started duplicating loops
by unswitching).
It does solve the currently known problem with compile-time degradation
(PR 39544).
Tests are built on top of a recently implemented CHECK-COUNT-<num>
FileCheck directives.
Reviewed By: chandlerc, mkazantsev
Differential Revision: https://reviews.llvm.org/D54223
llvm-svn: 347097
For example, on X86 we emit a sign_extend_vector_inreg from LowerLoad and without sse4.1 this node will need further legalization. Previously this sign_extend_vector_inreg was being custom lowered during DAG legalization instead of vector op legalization.
Unfortunately, this doesn't seem to matter for the output of any existing lit tests.
llvm-svn: 347094
When unwinding past a function that uses shadow call stack, we must
subtract 8 from the value of the x18 register. This patch causes us
to emit a call frame instruction that causes that to happen.
Differential Revision: https://reviews.llvm.org/D54609
llvm-svn: 347089
Summary:
Experience has shown that the functionality is useful. It makes linking
optimized clang with debug info for me a lot faster, 20s to 13s. The
type merging phase of PDB writing goes from 10s to 3s.
This removes the LLVM cl::opt and replaces it with a metadata flag.
After this change, users can do the following to use ghash:
- add -gcodeview-ghash to compiler flags
- replace /DEBUG with /DEBUG:GHASH in linker flags
Reviewers: zturner, hans, thakis, takuto.ikuta
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54370
llvm-svn: 347072
Summary:
StructRet attribute is not allowed in vararg calls. The statepoint
intrinsic is vararg, but the wrapped function may be not. Allow
calls of statepoint with StructRet arg, as long as the wrapped
function is not vararg.
Reviewers: thanm, anna
Reviewed By: anna
Subscribers: anna, llvm-commits
Differential Revision: https://reviews.llvm.org/D53602
llvm-svn: 347050
This is a follow-up to r346715. Use PRIx64 to formatted print of 64-bit
value in the `DWARFDebugLoclists::LocationList::dump` to escape problem
on big-endian hosts.
llvm-svn: 347049
Summary:
As discussed in previous review, and noted in the FIXME, if `X` is actually an `lshr Y, Z` (logical!),
we can fold the `Z` into 'control`, and let the `BEXTR` do this too.
We could just insert those 8 bits of shift amount into control,
but it is better to instead zero-extend them, and 'or' them in place.
We can only do this for `lshr`, not `ashr`, because we do not know that the mask cover only the bits of `Y`,
and not any of the sign-extended bits.
The obvious question is, is this actually legal to do?
I believe it is. Relevant quotes, from `Intel® 64 and IA-32 Architectures Software Developer’s Manual`, `BEXTR — Bit Field Extract`:
* `Bit 7:0 of the second source operand specifies the starting bit position of bit extraction.`
* `A START value exceeding the operand size will not extract any bits from the second source operand.`
* `Only bit positions up to (OperandSize -1) of the first source operand are extracted.`
* `All higher order bits in the destination operand (starting at bit position LENGTH) are zeroed.`
* `The destination register is cleared if no bits are extracted.`
FIXME: if we can do this, i wonder if we should prefer `BEXTR` over `BZHI` in such cases.
Reviewers: RKSimon, craig.topper, spatel, andreadb
Reviewed By: RKSimon, craig.topper, andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54095
llvm-svn: 347048
The RISC-V ISA manual was updated on 2018-11-07 (commit 00557c3) to define a
new compressed instruction format, RVC format CA (no actual instruction
encodings were changed). This patch updates the RISC-V backend to define the
new format, and to use it in the relevant instructions.
Differential Revision: https://reviews.llvm.org/D54302
Patch by Luís Marques.
llvm-svn: 347043
This commit introduces support for materialising 64-bit constants for RV64I,
making use of the RISCVMatInt::generateInstSeq helper in order to share logic
for immediate materialisation with the MC layer (where it's used for the li
pseudoinstruction).
test/CodeGen/RISCV/imm.ll is updated to test RV64, and gains new 64-bit
constant tests. It would be preferable if anyext constant returns were sign
rather than zero extended (see PR39092). This patch simply adds an explicit
signext to the returns in imm.ll.
Further optimisations for constant materialisation are possible, most notably
for mask-like values which can be generated my loading -1 and shifting right.
A future patch will standardise on the C++ codepath for immediate selection on
RV32 as well as RV64, and then add further such optimisations to
RISCVMatInt::generateInstSeq in order to benefit both RV32 and RV64 for
codegen and li expansion.
Differential Revision: https://reviews.llvm.org/D52962
llvm-svn: 347042
Introduces support for '.refsym' assembler directive.
From GCC docs (for MSP430):
'.refsym' - This directive instructs assembler to add an undefined reference
to the symbol following the directive. No relocation is created for this symbol;
it will exist purely for pulling in object files from archives.
Patch by Kristina Bessonova!
Differential Revision: https://reviews.llvm.org/D54618
llvm-svn: 347041
An attempt to recommit r346584 after failure on OSX build bot.
Fixed cache key computation in ThinLTOCodeGenerator and added
test case
llvm-svn: 347033
By early promoting the multiply to use an i16 element type we can avoid op legalization emit a second multiply for the 8 upper elements of the v16i8 type we would otherwise get.
llvm-svn: 347032
If a block had one of the _term instructions used for gluing
exec modifying instructions to the end of the block,
analyzeBranch would fail, preventing the verifier from catching
a broken successor list.
llvm-svn: 347027
We aren't going to use the upper bits of the multiply result that the extend would effect. So we don't need a specific type of extend.
This makes some reduction test cases shorter because we were previously trying to sign_extend a truncate which we can't eliminate.
llvm-svn: 347011
It fixes the case when Objective-C framework is added as a subframework
through a symlink. When parent framework infers a module map and fails
to detect a symlink, it would add a subframework as a submodule. And
when we parse module map for the subframework, we would encounter an
error like
> error: umbrella for module 'WithSubframework.Foo' already covers this directory
By implementing `getRealPath` "an egregious but useful hack" in
`ModuleMap::inferFrameworkModule` works as expected.
rdar://problem/45821279
Reviewers: bruno, benlangmuir, erik.pilkington
Reviewed By: bruno
Subscribers: hiraditya, dexonsmith, JDevlieghere, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54245
llvm-svn: 347009
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
Summary:
`throw` instruction is a terminator in wasm, but BBs were not splitted
after `throw` instructions, causing machine instruction verifier to
fail.
This patch
- Splits BBs after `throw` instructions in WasmEHPrepare and adding an
unreachable instruction after `throw`, which will be deleted in
LateEHPrepare pass
- Refactors WasmEHPrepare into two member functions
- Changes the semantics of `eraseBBsAndChildren` in LateEHPrepare pass
to match that of WasmEHPrepare pass, which is newly added. Now
`eraseBBsAndChildren` does not delete BBs with remaining predecessors.
- Fixes style nits, making static function names conform to clang-tidy
- Re-enables the test temporarily disabled by rL346840 && rL346845
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54571
llvm-svn: 347003
Removing this code doesn't affect any lit tests so it doesn't appear to be tested anymore. I assume it was when it was added, but I guess something else changed? Code coverage report also says its unused.
I mostly didn't like that it seemed to count the sign bits as if it was a sign_extend, but then set isPositive as if it was a zero_extend. It feels like we should have picked one interpretation?
Differential Revision: https://reviews.llvm.org/D54596
llvm-svn: 346995
Use unsigned to calculate the subvector index to avoid a cast.
Remove an unnecessary condition and replace it with a stronger assert.
Use the InVT variable we updated when we extracted instead of grabbing it from the In SDValue.
llvm-svn: 346983
In reduceVMULWidth, we no longer need to worry about extending the vector to 128 bits first. Regular widening of extends, muls and shuffles will take care of that for us.
In combineMulToPMADDWD, we can handle v2i32 multiplies and allow the VPMADDWD to be widened to v4i32 during type legalization by adding custom widening like we do have for AVG/ADDUS/SUBUS. I had to modify that code a little to allow different and output VTs.
Differential Revision: https://reviews.llvm.org/D54512
llvm-svn: 346980
Summary:
The old return type did not allow for correct error reporting and was
causing a compiler warning.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54586
llvm-svn: 346979
Add data structure to represent MessagePack "documents" and convert
to/from both MessagePack and YAML encodings.
Differential Revision: https://reviews.llvm.org/D48175
llvm-svn: 346978
This fixes -filetype=null support when compiling for a Win32 target and the module has a CodeView flag.
The only places changed are the uses of getTargetStreamer function - this patch guards both of them with null checks.
Committed on behalf of @eush (Eugene Sharygin)
Differential Revision: https://reviews.llvm.org/D54008
llvm-svn: 346962
This is a problem seen in common rotate idioms as noted in:
https://bugs.llvm.org/show_bug.cgi?id=34924
Note that we are not canonicalizing standard IR (shifts and logic) to the intrinsics yet.
(Although I've written this before...) I think this is the last step before we enable
that transform. Ie, we could regress code by doing that transform without this
simplification in place.
In PR34924, I questioned whether this is a valid transform for target-independent IR,
but I convinced myself this is ok. If we're speculating a funnel shift by turning cmp+br
into select, then SimplifyCFG has already determined that the transform is justified.
It's possible that SimplifyCFG is not taking into account profile or other metadata,
but if that's true, then it's a bug independent of funnel shifts.
Also, we do have CGP code to restore a guard like this around an intrinsic if it can't
be lowered cheaply. But that isn't necessary for funnel shift because the default
expansion in SelectionDAGBuilder includes this same cmp+select.
Differential Revision: https://reviews.llvm.org/D54552
llvm-svn: 346960
C.EBREAK was defined with hasSideEffects = 0, which is incorrect and
inconsistent with the non-compressed instruction form. This patch corrects
this oversight.
This wouldn't cause codegen issues, as compressed instructions are only ever
generated by converting the non-compressed form as an MCInst. But having
correct flags is still worthwhile.
Differential Revision: https://reviews.llvm.org/D54256
Patch by Luís Marques.
llvm-svn: 346959
Mark the FREM SelectionDAG node as Expand, which is necessary in order to
support the frem IR instruction on RISC-V. This is expanded into a library
call. Adds the corresponding test. Previously, this would have triggered an
assertion at instruction selection time.
Differential Revision: https://reviews.llvm.org/D54159
Patch by Luís Marques.
llvm-svn: 346958
Reapply r346374 with the fixes for modules build.
Original summary:
This change implements assembler parser, code emitter, ELF object writer
and disassembler for the MSP430 ISA. Also, more instruction forms are added
to the target description.
Patch by Michael Skvortsov!
llvm-svn: 346948
Logic to load 32-bit and 64-bit immediates is currently present in
RISCVAsmParser::emitLoadImm in order to support the li pseudoinstruction. With
the introduction of RV64 codegen, there is a greater benefit of sharing
immediate materialisation logic between the MC layer and codegen. The
generateInstSeq helper allows this by producing a vector of simple structs
representing the chosen instructions. This can then be consumed in the MC
layer to produce MCInsts or at instruction selection time to produce
appropriate SelectionDAG node. Sharing this logic means that both the li
pseudoinstruction and codegen can benefit from future optimisations, and
that this logic can be used for materialising constants during RV64 codegen.
This patch does contain a behaviour change: addi will now be produced on RV64
when no lui is necessary to materialise the constant. In that case addiw takes
x0 as the source register, so is semantically identical to addi.
Differential Revision: https://reviews.llvm.org/D52961
llvm-svn: 346937
This avoids some nasty shuffles when we have avx512. It will also prevent using zmm truncate instructions when a ymm instruction that zeroes part of an xmm register will do. Also avoid using avx512 truncate instructions when the input is 128 bits or less. These instructions are 2 uops on skx so we can probably find a better single uop shuffle like pshufb.
llvm-svn: 346936
The narrow types end up requesting widening, but generic legalization will end up scalaring and using a build_vector to do the widening.
llvm-svn: 346916
On 64-bit targets the type legalizer will use i64 to legalize these. But when i64 isn't legal, the type legalizer won't try an FP type. So do it manually instead.
There are a few regressions in here due to some v2i32 operations like mul and div now being reassembled into a full vector just to store instead of storing the pieces. But this was already occuring in 64-bit mode so its not a new issue.
llvm-svn: 346908
Using the MBB flags, we can tell if X16/X17/NZCV are unused in a block,
and also not live out.
If this holds for all MBBs, then we can avoid checking for liveness on
that candidate. Furthermore, if it holds for an individual candidate's
MBB, then we can avoid checking for liveness on that candidate.
llvm-svn: 346901
Summary:
Followup from D53596/r346891. Remove the getMDNodeFwdRefOrNull interface
to the MDLoader since it is no longer used. Also improve error messages
when the internal implementation is used within the MDLoader.
Reviewers: steven_wu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54542
llvm-svn: 346899
The machine scheduler currently biases register copies to/from
physical registers to be closer to their point of use / def to
minimize their live ranges. This change extends this to also physical
register assignments from immediate values.
This causes a reduction in reduction in overall register pressure and
minor reduction in spills and indirectly fixes an out-of-registers
assertion (PR39391).
Most test changes are from minor instruction reorderings and register
name selection changes and direct consequences of that.
Reviewers: MatzeB, qcolombet, myatsina, pcc
Subscribers: nemanjai, jvesely, nhaehnle, eraman, hiraditya,
javed.absar, arphaman, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54218
llvm-svn: 346894
This is a revised version of D41474.
When the debug location is parsed in BitcodeReader::parseFunction, the
scope and inlinedAt MDNodes are obtained via MDLoader->getMDNodeFwdRefOrNull(),
which will create a forward ref if they were not yet loaded.
Specifically, if one of these MDNodes is in the module level metadata
block, and this is during ThinLTO importing, that metadata block is
lazily loaded.
Most places in that invoke getMDNodeFwdRefOrNull have a corresponding call
to resolveForwardRefsAndPlaceholders which will take care of resolving them.
E.g. places that call getMetadataFwdRefOrLoad, or at the end of parsing a
function-level metadata block, or at the end of the initial lazy load of
module level metadata in order to handle invocations of getMDNodeFwdRefOrNull
for named metadata and global object attachments. However, the calls for
the scope/inlinedAt of debug locations are not backed by any such call to
resolveForwardRefsAndPlaceholders.
To fix this, change the scope and inlinedAt parsing to instead use
getMetadataFwdRefOrLoad, which will ensure the forward refs to lazily
loaded metadata are resolved.
Fixes PR35472.
llvm-svn: 346891
Add support for "polymorphic" types to YAMLIO.
PolymorphicTraits can dynamically switch between other traits (Scalar, Map, or
Sequence). When inputting, the PolymorphicTraits type is told which type to
become, and when outputting the PolymorphicTraits type is asked which type it
currently is.
Also add support for TaggedScalarTraits to allow dynamically differentiating
between multiple scalar types using YAML tags.
Serialize empty maps as "{}" and empty sequences as "[]", so that types
are preserved when round-tripping PolymorphicTraits. This change has
equivalent semantics, but may break e.g. tests which compare output
verbatim.
Differential Revision: https://reviews.llvm.org/D48144
llvm-svn: 346884
Summary:
Previously we marked all vararg functions as non-inlinable in the
function summary, which prevented their importing. However, the
corresponding inliner restriction was loosened in r321940/r342675
to only apply to functions calling va_start. Adjust the summary
flag computation to match.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54270
llvm-svn: 346883
