MSVC has a nesting limit of around 110-130. An if/else if/else if counts against this next level. The autoupgrade code consists a long chain of these checking matches against strings.
This commit moves some code to a helper function to move out a large if/else chain that was inside of one of the blocks into a separate function. There are more of these we could move or we could change some to lookup tables.
I've also merged together a few similar blocks in the outer chain. This should buy us some margin for a little bit.
llvm-svn: 350564
`CallSite`.
With this change, the remaining `CallSite` usages are just for
implementing the wrapper type itself.
This does update the C API but leaves the names of that API alone and
only updates their implementation.
Differential Revision: https://reviews.llvm.org/D56184
llvm-svn: 350509
update client code.
Also rename it to use the more generic term `call` instead of something
that could be confused with a praticular type.
Differential Revision: https://reviews.llvm.org/D56183
llvm-svn: 350508
`CallSite` wrapper.
Mostly mechanical, but I've tried to tidy up code where it made sense to
do so.
Differential Revision: https://reviews.llvm.org/D56143
llvm-svn: 350507
Motivated by the discussion in D38499, this patch updates BasicAA to support
arbitrary pointer sizes by switching most remaining non-APInt calculations to
use APInt. The size of these APInts is set to the maximum pointer size (maximum
over all address spaces described by the data layout string).
Most of this translation is straightforward, but this patch contains a fix for
a bug that revealed itself during this translation process. In order for
test/Analysis/BasicAA/gep-and-alias.ll to pass, which is run with 32-bit
pointers, the intermediate calculations must be performed using 64-bit
integers. This is because, as noted in the patch, when GetLinearExpression
decomposes an expression into C1*V+C2, and we then multiply this by Scale, and
distribute, to get (C1*Scale)*V + C2*Scale, it can be the case that, even
through C1*V+C2 does not overflow for relevant values of V, (C2*Scale) can
overflow. If this happens, later logic will draw invalid conclusions from the
(base) offset value. Thus, when initially applying the APInt conversion,
because the maximum pointer size in this test is 32 bits, it started failing.
Suspicious, I created a 64-bit version of this test (included here), and that
failed (miscompiled) on trunk for a similar reason (the multiplication can
overflow).
After fixing this overflow bug, the first test case (at least) in
Analysis/BasicAA/q.bad.ll started failing. This is also a 32-bit test, and was
relying on having 64-bit intermediate values to have BasicAA return an accurate
result. In order to fix this problem, and because I believe that it is not
uncommon to use i64 indexing expressions in 32-bit code (especially portable
code using int64_t), it seems reasonable to always use at least 64-bit
integers. In this way, we won't regress our analysis capabilities (and there's
a command-line option added, so experimenting with this should be easy).
As pointed out by Eli during the review, there are other potential overflow
conditions that this patch does not address. Fixing those is left to follow-up
work.
Patch by me with contributions from Michael Ferguson (mferguson@cray.com).
Differential Revision: https://reviews.llvm.org/D38662
llvm-svn: 350220
GlobalVariable
Summary:
Extend Module::getOrInsertGlobal to accept a callback for creating a new
GlobalVariable if necessary instead of calling the GV constructor
directly using default arguments. Additionally overload
getOrInsertGlobal for the previous default behavior.
Reviewers: chandlerc
Subscribers: hiraditya, llvm-commits, bollu
Differential Revision: https://reviews.llvm.org/D56130
llvm-svn: 350219
Summary: Add accessors so the performance improvement from this setting is accessible to third parties.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56179
llvm-svn: 350196
Summary:
This will make migrating code easier and generally seems like a good collection
of API improvements.
Some of these APIs seem like more consistent / better naming of existing
ones. I've retained the old names for migration simplicit and am just
adding the new ones in this commit. I'll try to garbage collect these
once CallSite is gone.
Subscribers: sanjoy, mcrosier, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D55638
llvm-svn: 350109
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
llvm-svn: 349973
Instruction::isLifetimeStartOrEnd() checks whether an Instruction is an
llvm.lifetime.start or an llvm.lifetime.end intrinsic.
This was suggested as a cleanup in D55967.
Differential Revision: https://reviews.llvm.org/D56019
llvm-svn: 349964
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
This is to address post-commit feedback from Paul Robinson on r348954.
The original commit misinterprets count and upper bound as the same thing (I thought I saw GCC producing an upper bound the same as Clang's count, but GCC correctly produces an upper bound that's one less than the count (in C, that is, where arrays are zero indexed)).
I want to preserve the C-like output for the common case, so in the absence of a lower bound the count (or one greater than the upper bound) is rendered between []. In the trickier cases, where a lower bound is specified, a half-open range is used (eg: lower bound 1, count 2 would be "[1, 3)" and an unknown parts use a '?' (eg: "[1, ?)" or "[?, 7)" or "[?, ? + 3)").
Reviewers: aprantl, probinson, JDevlieghere
Differential Revision: https://reviews.llvm.org/D55721
llvm-svn: 349670
Now that we use the generic ISD opcodes, we can use the generic intrinsics directly as well. This fixes the poor fast-isel codegen by not expanding to an easily broken IR code sequence.
I'm intending to deal with the signed saturation equivalents as well.
Clang counterpart: https://reviews.llvm.org/D55879
Differential Revision: https://reviews.llvm.org/D55855
llvm-svn: 349630
Implement options in clang to enable recording the driver command-line
in an ELF section.
Implement a new special named metadata, llvm.commandline, to support
frontends embedding their command-line options in IR/ASM/ELF.
This differs from the GCC implementation in some key ways:
* In GCC there is only one command-line possible per compilation-unit,
in LLVM it mirrors llvm.ident and multiple are allowed.
* In GCC individual options are separated by NULL bytes, in LLVM entire
command-lines are separated by NULL bytes. The advantage of the GCC
approach is to clearly delineate options in the face of embedded
spaces. The advantage of the LLVM approach is to support merging
multiple command-lines unambiguously, while handling embedded spaces
with escaping.
Differential Revision: https://reviews.llvm.org/D54487
Clang Differential Revision: https://reviews.llvm.org/D54489
llvm-svn: 349155
build version load commands in the object file
This commit introduces a new metadata node called "SDK Version". It will be set
by the frontend to mark the platform SDK (macOS/iOS/etc) version which was used
during that particular compilation.
This node is used when machine code is emitted, by either saving the SDK version
into the appropriate macho load command (version min/build version), or by
emitting the assembly for these load commands with the SDK version specified as
well.
The assembly for both load commands is extended by allowing it to contain the
sdk_version X, Y [, Z] trailing directive to represent the SDK version
respectively.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55612
llvm-svn: 349119
Summary:
Sometimes MIR-level passes create DILocations that were not present in the
LLVM-IR. For example, it may merge two DILocations together to produce a
DILocation that points to line 0.
Previously, the address of these DILocations were printed which prevented the
MIR from being read back into LLVM. With this patch, DILocations will use
metadata references where possible and fall back on serializing them inline like so:
MOV32mr %stack.0.x.addr, 1, _, 0, _, %0, debug-location !DILocation(line: 1, scope: !15)
Reviewers: aprantl, vsk, arphaman
Reviewed By: aprantl
Subscribers: probinson, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55243
llvm-svn: 349035
Indices for getelementptr can be signed so we should use
getMinSignedBits instead of getActiveBits here. The function later calls
getSExtValue to get the int64_t value, which also checks
getMinSignedBits.
This fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11647.
Reviewers: mssimpso, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D55536
llvm-svn: 348957
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D54719
llvm-svn: 348912
Without this check, we hit an assertion in getZExtValue, if the constant
value does not fit into an uint64_t.
As getZExtValue returns an uint64_t, should we update
getAggregateElement to take an uin64_t as well?
This fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6109.
Reviewers: efriedma, craig.topper, spatel
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D55547
llvm-svn: 348906
IR-printing AfterPass instrumentation might be called on a loop
that has just been invalidated. We should skip printing it to
avoid spurious asserts.
Reviewed By: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D54740
llvm-svn: 348887
Summary: The APFloat and Constant APIs taking an APInt allow arbitrary payloads,
and that's great. There's a convenience API which takes an unsigned, and that's
silly because it then directly creates a 64-bit APInt. Just change it to 64-bits
directly.
At the same time, add ConstantFP NaN getters which match the APFloat ones (with
getQNaN / getSNaN and APInt parameters).
Improve the APFloat testing to set more payload bits.
Reviewers: scanon, rjmccall
Subscribers: jkorous, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D55460
llvm-svn: 348791
Both intrinsics do the exact same thing so we really only need one.
Earlier in the 8.0 cycle we changed the signature of this intrinsic without renaming it. But it looks difficult to get the autoupgrade code to allow me to merge the intrinsics and change the signature at the same time. So I've renamed the intrinsic slightly for the new merged intrinsic. I'm skipping autoupgrading from the previous new to 8.0 signature. I've also renamed the subborrow for consistency.
llvm-svn: 348737
Someday we'd like to remove old autoupgrade code so it helps to annotate how long its been there so we don't have to go digging through commit history.
llvm-svn: 348728
In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
This was approved previously https://reviews.llvm.org/D55115 (r348215)
but when committed it caused failures on the sanitizer buildbots when
building llvm with clang (containing this patch). This is now fixed
because I've added a check to see if getting the parent module returns
null if it does then set the alignment to 0.
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348571
This reverts commit r348203 and reapplies D55085 with an additional
GCOV bugfix to make the change NFC for relative file paths in .gcno files.
Thanks to Ilya Biryukov for additional testing!
Original commit message:
Update Diagnostic handling for changes in CFE.
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348512
This reverts commit r348203.
Reason: this produces absolute paths in .gcno files, breaking us
internally as we rely on them being consistent with the filenames passed
in the command line.
Also reverts r348157 and r348155 to account for revert of r348154 in
clang repository.
llvm-svn: 348279
In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348215
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348155
Extend ssub.sat(X, C) -> sadd.sat(X, -C) canonicalization to also
support non-splat vector constants. This is done by generalizing
the implementation of the isNotMinSignedValue() helper to return
true for constants that are non-splat, but don't contain any
signed min elements.
Differential Revision: https://reviews.llvm.org/D55011
llvm-svn: 348072
Update IR verifier to check the constraint that DIFile source is present on all
files or no files.
Differential Revision: https://reviews.llvm.org/D54953
llvm-svn: 348022
Lack of an attribute means that the function hasn't been checked for what vector width it requires. So if the caller or the callee doesn't have the attribute we should make sure the combined function after inlining does not have the attribute.
If the caller already doesn't have the attribute we can just avoid adding it. Otherwise if the callee doesn't have the attribute just remove the caller's attribute.
llvm-svn: 347841
Packing the flags into one bitcode word will save effort in
adding new flags in the future.
Differential Revision: https://reviews.llvm.org/D54755
llvm-svn: 347806
a normal base class that provides all common "call" functionality.
This merges two complex CRTP mixins for the common "call" logic and
common operand bundle logic into a single, normal base class of
`CallInst` and `InvokeInst`. Going forward, users can typically
`dyn_cast<CallBase>` and use the resulting API. No more need for the
`CallSite` wrapper. I'm planning to migrate current usage of the wrapper
to directly use the base class and then it can be removed, but those are
simpler and much more incremental steps. The big change is to introduce
this abstraction into the type system.
I've tried to do some basic simplifications of the APIs that I couldn't
really help but touch as part of this:
- I've tried to organize the attribute API and bundle API into groups to
make understanding the API of `CallBase` easier. Without this,
I wasn't able to navigate the API sanely for all of the ways I needed
to modify it.
- I've added what seem like more clear and consistent APIs for getting
at the called operand. These ended up being especially useful to
consolidate the *numerous* duplicated code paths trying to do this.
- I've largely reworked the organization and implementation of the APIs
for computing the argument operands as they needed to change to work
with the new subclass approach.
To minimize any cost associated with this abstraction, I've moved the
operand layout in memory to store the called operand last. This makes
its position relative to the end of the operand array the same,
regardless of the subclass. It should make it much cheaper to reference
from the `CallBase` abstraction, and this is likely one of the most
frequent things to query.
We do still pay one abstraction penalty here: we have to branch to
determine whether there are 0 or 2 extra operands when computing the end
of the argument operand sequence. However, that seems both rare and
should optimize well. I've implemented this in a way specifically
designed to allow it to optimize fairly well. If this shows up in
profiles, we can add overrides of the relevant methods to the subclasses
that bypass this penalty. It seems very unlikely that this will be an
issue as the code was *already* dealing with an ever present abstraction
of whether or not there are operand bundles, so this isn't the first
branch to go into the computation.
I've tried to remove as much of the obvious vestigial API surface of the
old CRTP implementation as I could, but I suspect there is further
cleanup that should now be possible, especially around the operand
bundle APIs. I'm leaving all of that for future work in this patch as
enough things are changing here as-is.
One thing that made this harder for me to reason about and debug was the
pervasive use of unsigned values in subtraction and other arithmetic
computations. I had to debug more than one unintentional wrap. I've
switched a few of these to use `int` which seems substantially simpler,
but I've held back from doing this more broadly to avoid creating
confusing divergence within a single class's API.
I also worked to remove all of the magic numbers used to index into
operands, putting them behind named constants or putting them into
a single method with a comment and strictly using the method elsewhere.
This was necessary to be able to re-layout the operands as discussed
above.
Thanks to Ben for reviewing this (somewhat large and awkward) patch!
Differential Revision: https://reviews.llvm.org/D54788
llvm-svn: 347452
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
llvm-svn: 347256
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
The #if check around the statistics computation gave an error about
the statistic being an unused variable. Instead, guard with
AreStatisticsEnabled().
llvm-svn: 347146
Summary:
Follow up to D49362 ([ThinLTO] Internalize read only globals). Add a
statistic on the number of read only variables (only counting live
variables since dead variables will be dropped anyway).
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54642
llvm-svn: 347145
