And use that to transform fsub with zero constant operands.
The integer part isn't used yet, but it is proposed for use in
D44548, so adding both enhancements here makes that
patch simpler.
llvm-svn: 343865
This fixes a case of bad index calculation when merging mismatching
vector types. This changes the existing code to just use the existing
extract_{subvector|element} and a bitcast (instead of bitcast first and
then newly created extract_xxx) so we don't need to adjust any indices
in the first place.
rdar://44584718
Differential Revision: https://reviews.llvm.org/D52681
llvm-svn: 343493
The SINT_TO_FP<->UINT_TO_FP combines for non-negative integers should only occur for legal ops once LegalOperations = true
No test case to hand, noticed when investigating PR38226 + PR38970
llvm-svn: 343405
DAGCombine will try to fold two loads that feed a SELECT or SELECT_CC
after the select, resulting in a select of an address and a single
load after.
If either of the loads depend on the other, this is not legal as it
could introduce cycles. However, it only checked this if the opcode
was a SELECT, and not for a SELECT_CC.
Unfortunately, the only reproducer I have for this is for our
downstream target. I've tried getting it to trigger on an upstream one
but haven't been successful.
Patch thanks to Bevin Hansson.
llvm-svn: 342980
This is a preliminary step towards solving PR14613:
https://bugs.llvm.org/show_bug.cgi?id=14613
If we have an 'add' instruction that sets flags, we can use that to eliminate an
explicit compare instruction or some other instruction (cmn) that sets flags for
use in the later select.
As shown in the unchanged tests that use 'icmp ugt %x, %a', we're effectively
reversing an IR icmp canonicalization that replaces a variable operand with a
constant:
https://rise4fun.com/Alive/V1Q
But we're not using 'uaddo' in those cases via DAG transforms. This happens in
CGP after D8889 without checking target lowering to see if the op is supported.
So AArch already shows 'uaddo' codegen for the i8/i16/i32/i64 test variants with
"using_cmp_sum" in the title. That's the pattern that CGP matches as an unsigned
saturated add and converts to uaddo without checking target capabilities.
This patch is gated by isOperationLegalOrCustom(ISD::UADDO, VT), so we see only
see AArch diffs for i32/i64 in the tests with "using_cmp_notval" in the title
(unlike x86 which sees improvements for all sizes because all sizes are 'custom').
But the AArch code (like x86) looks better when translated to 'uaddo' in all cases.
So someone that is involved with AArch may want to set i8/i16 to 'custom' for UADDO,
so this patch will fire on those tests.
Another possibility given the existing behavior: we could remove the legal-or-custom
check altogether because we're assuming that a UADDO sequence is canonical/optimal
before we ever reach here. But that seems like a bug to me. If the target doesn't
have an add-with-flags op, then it's not likely that we'll get optimal DAG combining
using a UADDO node. This is similar justification for why we don't canonicalize IR to
the overflow math intrinsic sibling (llvm.uadd.with.overflow) for UADDO in the first
place.
Differential Revision: https://reviews.llvm.org/D51929
llvm-svn: 342886
This code handled SCALAR_TO_VECTOR being returned by the recursion, but the code that used to return SCALAR_TO_VECTOR was removed in 2015.
llvm-svn: 342856
This comment was misleading about why we were restricting to before legalize types. The reason given would only apply to before legalize ops. But there is a before legalize types reason that should also be listed.
llvm-svn: 342851
This is an alternative to https://reviews.llvm.org/D37896. We can't decompose
multiplies generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some existing code that overlaps with
this transform.
This extends D52195 and may resolve PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
(still an open question about transforming legal vector multiplies, but we
could open another bug report for those)
llvm-svn: 342844
x86 had 2 versions of peekThroughBitcast. DAGCombiner had 1. Plus, it had a 1-off implementation for the one-use variant.
Move the x86 versions of the code to SelectionDAG, so we don't have different copies of the code.
No functional change intended.
I'm putting this next to isBitwiseNot() because I am planning to use it in there. Another option is next to the
helpers in the ISD namespace (eg, ISD::isConstantSplatVector()). But if there's no good reason for those to be
there, I'd prefer to pull other helpers over to SelectionDAG in follow-up steps.
Differential Revision: https://reviews.llvm.org/D52285
llvm-svn: 342669
The test diff in not-and-simplify.ll is from a use in SimplifyDemandedBits,
and the test diff in add.ll is from a DAGCombiner transform.
llvm-svn: 342594
This is an alternative to D37896. I don't see a way to decompose multiplies
generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some duplicate code that overlaps with
this transform.
As a first step, we're only getting the most clear wins on the vector examples
requested in PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
As noted in the code comment, it's likely that the x86 constraints are tighter
than necessary, but it may not always be a win to replace a pmullw/pmulld.
Differential Revision: https://reviews.llvm.org/D52195
llvm-svn: 342554
This is a follow-up suggested in D51630 and originally proposed as an IR transform in D49040.
Copying the motivational statement by @evandro from that patch:
"This transformation helps some benchmarks in SPEC CPU2000 and CPU2006, such as 188.ammp,
447.dealII, 453.povray, and especially 300.twolf, as well as some proprietary benchmarks.
Otherwise, no regressions on x86-64 or A64."
I'm proposing to add only the minimum support for a DAG node here. Since we don't have an
LLVM IR intrinsic for cbrt, and there are no other DAG ways to create a FCBRT node yet, I
don't think we need to worry about DAG builder, legalization, a strict variant, etc. We
should be able to expand as needed when adding more functionality/transforms. For reference,
these are transform suggestions currently listed in SimplifyLibCalls.cpp:
// * cbrt(expN(X)) -> expN(x/3)
// * cbrt(sqrt(x)) -> pow(x,1/6)
// * cbrt(cbrt(x)) -> pow(x,1/9)
Also, given that we bail out on long double for now, there should not be any logical
differences between platforms (unless there's some platform out there that has pow()
but not cbrt()).
Differential Revision: https://reviews.llvm.org/D51753
llvm-svn: 342348
Add support for bitcasts from float type to an integer type of the same element bitwidth.
There maybe cases where we need to support different widths (e.g. as SSE __m128i is treated as v2i64) - but I haven't seen cases of this in the wild yet.
llvm-svn: 341652
This was proposed as an IR transform in D49306, but it was not clearly justifiable as a canonicalization.
Here, we only do the transform when the target tells us that sqrt can be lowered with inline code.
This is the basic case. Some potential enhancements are in the TODO comments:
1. Generalize the transform for other exponents (allow more than 2 sqrt calcs if that's really cheaper).
2. If we have less fast-math-flags, generate code to avoid -0.0 and/or INF.
3. Allow the transform when optimizing/minimizing size (might require a target hook to get that right).
Note that by default, x86 converts single-precision sqrt calcs into sqrt reciprocal estimate with
refinement. That codegen is controlled by CPU attributes and can be manually overridden. We have plenty
of test coverage for that already, so I didn't bother to include extra testing for that here. AArch uses
its full-precision ops in all cases (not sure if that's the intended behavior or not, but that should
also be covered by existing tests).
Differential Revision: https://reviews.llvm.org/D51630
llvm-svn: 341481
Summary:
I'm not sure if this patch is correct or if it needs more qualifying somehow. Bitcast shouldn't change the size of the load so it should be ok? We already do something similar for stores. We'll change the type of a volatile store if the resulting store is Legal or Custom. I'm not sure we should be allowing Custom there...
I was playing around with converting X86 atomic loads/stores(except seq_cst) into regular volatile loads and stores during lowering. This would allow some special RMW isel patterns in X86InstrCompiler.td to be removed. But there's some floating point patterns in there that didn't work because we don't fold (f64 (bitconvert (i64 volatile load))) or (f32 (bitconvert (i32 volatile load))).
Reviewers: efriedma, atanasyan, arsenm
Reviewed By: efriedma
Subscribers: jvesely, arsenm, sdardis, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, arichardson, jrtc27, atanasyan, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50491
llvm-svn: 340797
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Previously we allowed the store to be Custom. But without knowing for sure that the Custom handling won't split the store, we shouldn't convert a volatile store. We also probably shouldn't be creating a store the requires custom handling after LegalizeOps. This could lead to an infinite loop if the custom handling was to insert a bitcast. Though I guess isStoreBitCastBeneficial could be used to block such a loop.
The test changes here are due to the volatile part of this. The stores in the test are all volatile and i32 stores are marked custom, So we are no longer converting them
This is related to D50491 where I was trying to allow some bitcasting of volatile loads
Differential Revision: https://reviews.llvm.org/D50578
llvm-svn: 340626
During combining, ReduceLoadWdith is used to combine AND nodes that
mask loads into narrow loads. This patch allows the mask to be a
shifted constant. This results in a narrow load which is then left
shifted to compensate for the new offset.
Differential Revision: https://reviews.llvm.org/D50432
llvm-svn: 340261
Summary:
I believe this restores the behavior we had before r339147.
Fixes PR38622.
Reviewers: RKSimon, chandlerc, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50936
llvm-svn: 340120
Add support for cases where only some c1+c2 results exceed the max bitshift, clamping accordingly.
Differential Revision: https://reviews.llvm.org/D35722
llvm-svn: 340010
When nodes are reassociated the vector-reduction flag gets lost.
The test case is here is what would happen if you had a sum of absolute differences loop that started with a non-zero but contant sum and that loop was unrolled. The vectorizer will generate a constant vector for the initial value. And DAGCombiner reassociate tries to move it down the addition tree erasing the vector-reduction flag. Interestingly this moves constants the opposite direction of the reassociate IR pass.
I've chosen to just punt on the reassociate, but I suppose we could maybe preserve the flag if both nodes have it set.
Differential Revision: https://reviews.llvm.org/D50827
llvm-svn: 339946
Intentionally excluding nodes from the DAGCombine worklist is likely to
lead to weird optimizations and infinite loops, so it's generally a bad
idea.
To avoid the infinite loops, fix DAGCombine to use the
isDesirableToCommuteWithShift target hook before performing the
transforms in question, and implement the target hook in the ARM backend
disable the transforms in question.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38530 . (I don't have a
reduced testcase for that bug. But we should have sufficient test
coverage for PerformSHLSimplify given that we're not playing weird
tricks with the worklist. I can try to bugpoint it if necessary,
though.)
Differential Revision: https://reviews.llvm.org/D50667
llvm-svn: 339734
Summary: This change provides a common optimization path for both Unsafe and FMF driven optimization for this fsub fold adding reassociation, as it the flag that most closely represents the translation
Reviewers: spatel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D50195
llvm-svn: 339357
isNegatibleForFree() should not matter here (as the test diffs show)
because it's always a win to replace an fsub+fadd with fneg. The
problem in D50195 persists because either (1) we are doing these
folds in the wrong order or (2) we're missing another fold for fadd.
llvm-svn: 339299
I don't know if it's possible to expose this diff in a test,
but we should always try simplifications (no new nodes created)
before more complicated transforms for efficiency (similar to
what we do in IR).
llvm-svn: 339298
The isConstOrConstSplat result is only used in a ISD::matchUnaryPredicate call which can perform the equivalent iteration just as quickly.
llvm-svn: 339262
Scatter could have multiple identical indices. We need to maintain sequential order. We get this right in LegalizeVectorTypes, but not in this code.
Differential Revision: https://reviews.llvm.org/D50374
llvm-svn: 339157
This was missed in D50185.
NFC until we add actual non-uniform support to BuildSDIV (similar BuildUDIV support in D49248) - for now it just early outs.
llvm-svn: 339147
This patch refactors the existing TargetLowering::BuildUDIV base implementation to support non-uniform constant vector denominators.
It also includes a fold for MULHU by pow2 constants to SRL which can now more readily occur from BuildUDIV.
Differential Revision: https://reviews.llvm.org/D49248
llvm-svn: 339121
Src0 doesn't really convey any meaning to what the operand is. Passthru matches what's used in the documentation for the intrinsic this comes from.
llvm-svn: 339101
First step towards a BuildSDIV equivalent to D49248 for non-uniform vector support - this just pushes the splat detection down into TargetLowering::BuildSDIV where its still used.
Differential Revision: https://reviews.llvm.org/D50185
llvm-svn: 338838
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
This is exchanging a sub-of-1 with add-of-minus-1:
https://rise4fun.com/Alive/plKAH
This is another step towards improving select-of-constants codegen (see D48970).
x86 is the motivating target, and those diffs all appear to be wins. PPC and AArch64 look neutral.
I've limited this to early combining (!LegalOperations) in case a target wants to reverse it, but
I think canonicalizing to 'add' is more likely to produce further transforms because we have more
folds for 'add'.
Differential Revision: https://reviews.llvm.org/D49924
llvm-svn: 338317
Thinking about it more it might be possible for the later nodes to be folded in getNode in such a way that the other created nodes are left dead. This can cause use counts to be incorrect on nodes that aren't dead.
So its probably safer to leave this alone.
llvm-svn: 338298
Summary:
Attempt to extract a shrl from a udiv or a shl from a mul if this allows a rotate to be formed. This targets cases where the input to a rotate pattern was a mul or udiv by a constant and InstCombine merged one of the shifts with the op.
Patch by: sameconrad (Sam Conrad)
Reviewers: RKSimon, craig.topper, spatel, lebedev.ri, javed.absar
Reviewed By: lebedev.ri
Subscribers: efriedma, kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D47681
llvm-svn: 338270
The DAGCombiner has a mechanism for ensuring all nodes have been visited at least once. Every time a node is visited, it makes sure its operands have been in the worklist at least once. This ensures that when multiple nodes are created by a combine, only the last node needs to be returned. The earlier nodes can all be found Through this operand check. These means we don't need to explicitly add nodes to the worklist when a combine creates multiple nodes.
I've removed the most obvious cases here. There are probably more than can be removed.
llvm-svn: 338222
This removes the need for an assert to ensure the pointer isn't null.
Years ago we had ifs the checked the pointer was non-null before very access to the vector. These checks were removed and replaced with a single assert. But a reference seems more suitable here.
llvm-svn: 338205
This is a follow-up suggested in D48970.
Alive proofs:
https://rise4fun.com/Alive/sII
We can eliminate an instruction in the usual select-of-constants
to bit hack transform by adjusting the add/sub with constant.
This is always a win.
There are more transforms that are likely wins, but they may need
target hooks in case some targets do not benefit.
This is another step towards making up for canonicalizing to
select-of-constants in rL331486.
llvm-svn: 338132
The DAGCombiner has a system for ensuring all nodes are visited. It doesn't require an AddToWorkList for every node that is created by a combine.
llvm-svn: 338079
When merging through a TokenFactor we need to check that the
load may be ordered such that no other aliasing memory operations may
happen. It is not sufficient to just check that the load is a member
of the chain token factor as it there may be a indirect chain. Require
the load's chain has only one use.
This fixes PR37826.
Reviewers: spatel, davide, efriedma, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D49388
llvm-svn: 337560
If we are only extracting vector elements via EXTRACT_VECTOR_ELT(s) we may be able to use SimplifyDemandedVectorElts to avoid unnecessary vector ops.
Differential Revision: https://reviews.llvm.org/D49262
llvm-svn: 337258
This is almost the same as an existing IR canonicalization in instcombine,
so I'm assuming this is a good early generic DAG combine too.
The motivation comes from reduced bit-hacking for select-of-constants in IR
after rL331486. We want to restore that functionality in the DAG as noted in
the commit comments for that change and the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2018-July/124433.html
The PPC and AArch tests show that those targets are already doing something
similar. x86 will be neutral in the minimal case and generally better when
this pattern is extended with other ops as shown in the signbit-shift.ll tests.
Note the asymmetry: we don't include the (extend (ifneg X)) transform because
it already exists in SimplifySelectCC(), and that is verified in the later
unchanged tests in the signbit-shift.ll files. Without the 'not' op, the
general transform to use a shift is always a win because that's a single
instruction.
Alive proofs:
https://rise4fun.com/Alive/ysli
Name: if pos, get -1
%c = icmp sgt i16 %x, -1
%r = sext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = ashr i16 %n, 15
Name: if pos, get 1
%c = icmp sgt i16 %x, -1
%r = zext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = lshr i16 %n, 15
Differential Revision: https://reviews.llvm.org/D48970
llvm-svn: 337130
Reuse this function as to test correctness and profitability of
reducing width of either load or store operations.
Reviewsers: samparker
Differential Revision: https://reviews.llvm.org/D48624
llvm-svn: 336800
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
llvm-svn: 336779
First stage in PR38057 - support non-uniform constant vectors in the combine to reuse the division-by-constant logic.
We can definitely do better for srem pow2 remainders (and avoid that extra multiply....) but this at least helps keep everything on the vector unit.
Differential Revision: https://reviews.llvm.org/D48975
llvm-svn: 336774
As suggested by @efriedma on D48975, this patch separates the BuildDiv/Pow2 style optimizations from the rest of the visitSDIV/visitUDIV to make it easier to reuse the combines and will allow us to avoid some rather nasty node recursive combining in visitREM.
llvm-svn: 336656
Summary:
This adds a reverse transform for the instcombine canonicalizations
that were added in D47980, D47981.
As discussed later, that was worse at least for the code size,
and potentially for the performance, too.
https://rise4fun.com/Alive/Zmpl
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: spatel
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D48768
llvm-svn: 336585
As discussed on PR37989, this patch adds EXTRACT_SUBVECTOR handling to TargetLowering::SimplifyDemandedVectorElts and calls it from DAGCombiner::visitEXTRACT_SUBVECTOR.
Differential Revision: https://reviews.llvm.org/D48825
llvm-svn: 336490
D48278
Allow to reduce redundant shift masks.
For example:
x1 = x & 0xAB00
x2 = (x >> 8) & 0xAB
can be reduced to:
x1 = x & 0xAB00
x2 = x1 >> 8
It only allows folding when the masks and shift values are constants.
llvm-svn: 336426
The combine added in commit 329525 overlooked the case where one, but not all, of the divisor elements is -1, -1 is the only power of two value for which the sdiv expansion recipe breaks.
Thanks to @zvi for the original patch.
Differential Revision: https://reviews.llvm.org/D45806
llvm-svn: 336048
We could get away with it for constant folded cases, but not for rL335719.
Thanks to Krzysztof Parzyszek for noticing.
Reapply original commit rL335821 which was reverted at rL335871 due to a WebAssembly bug that was fixed at rL335884.
llvm-svn: 335886
As noted in the D44909 review, the transform from (fptosi+sitofp) to ftrunc
can produce -0.0 where the original code does not:
#include <stdio.h>
int main(int argc) {
float x;
x = -0.8 * argc;
printf("%f\n", (float)((int)x));
return 0;
}
$ clang -O0 -mavx fp.c ; ./a.out
0.000000
$ clang -O1 -mavx fp.c ; ./a.out
-0.000000
Ideally, we'd use IR/node flags to predicate the transform, but the IR parser
doesn't currently allow fast-math-flags on the cast instructions. So for now,
just use the function attribute that corresponds to clang's "-fno-signed-zeros"
option.
Differential Revision: https://reviews.llvm.org/D48085
llvm-svn: 335761
This patch has the same motivating example as D48466:
define void @foo(i64 %x, i32 %c.0282.in, i32 %d.0280, i32* %ptr0, i32* %ptr1) {
%c.0282 = and i32 %c.0282.in, 268435455
%a16 = lshr i64 32508, %x
%a17 = and i64 %a16, 1
%tobool = icmp eq i64 %a17, 0
%. = select i1 %tobool, i32 1, i32 2
%.286 = select i1 %tobool, i32 27, i32 26
%shr97 = lshr i32 %c.0282, %.
%shl98 = shl i32 %c.0282.in, %.286
%or99 = or i32 %shr97, %shl98
%shr100 = lshr i32 %d.0280, %.
%shl101 = shl i32 %d.0280, %.286
%or102 = or i32 %shr100, %shl101
store i32 %or99, i32* %ptr0
store i32 %or102, i32* %ptr1
ret void
}
...but I'm trying to kill the setcc bool math sooner rather than later.
By matching a larger pattern that includes both the low-bit mask and the trailing add/sub,
we can create a universally good fold because we always eliminate the condition code
intermediate value.
Here are Alive proofs for these (currently instcombine folds the 'add' variants, but
misses the 'sub' patterns):
https://rise4fun.com/Alive/Gsyp
Name: sub of zext cmp mask
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%z = zext i1 %c to i32
%r = sub i32 C1, %z
=>
%optional_cast = zext i8 %a to i32
%r = add i32 %optional_cast, C1-1
Name: add of zext cmp mask
%a = and i32 %x, 1
%c = icmp eq i32 %a, 0
%z = zext i1 %c to i8
%r = add i8 %z, C1
=>
%optional_cast = trunc i32 %a to i8
%r = sub i8 C1+1, %optional_cast
All of the tests look like improvements or neutral to me. But it is possible that x86
test+set+bitop is better than what we now show here. I suspect we could do better by
adding another fold for the 'sub' variants.
We start with select-of-constant in IR in the larger motivating test, so that's why I
included tests with selects. Proofs for those variants:
https://rise4fun.com/Alive/Bx1
Name: true const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C2, i64 C1
=>
%z = zext i8 %a to i64
%r = sub i64 C2, %z
Name: false const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C1, i64 C2
=>
%z = zext i8 %a to i64
%r = add i64 C1, %z
Differential Revision: https://reviews.llvm.org/D48466
llvm-svn: 335433
Allowed folding for "and/or" binops with non-constant operand if
arguments of select are 0/-1 values.
Normally this code with "and" opcode does not get to a DAG combiner
and simplified yet in the InstCombine. However AMDGPU produces it
during lowering and InstCombine has no chance to optimize it out.
In turn the same pattern with "or" opcode can reach DAG.
Differential Revision: https://reviews.llvm.org/D48301
llvm-svn: 335250
The alignment parameter to getExtLoad is treated as a base alignment,
not the alignment of the load (base + offset). When we infer a better
alignment for a Ptr we need to ensure that it applies to the base to
prevent the alignment on the load from being wrong.
This fixes a bug where the alignment could then be used to incorrectly
prove noalias between a load and a store, leading to a miscompile.
Differential Revision: https://reviews.llvm.org/D48029
llvm-svn: 335210
Previously this folding was done only if select is a first operand.
However, for non-commutative operations constant may go before
select.
Differential Revision: https://reviews.llvm.org/D48223
llvm-svn: 335167
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47909
llvm-svn: 334996
Summary: Refactoring for all constant cases which require AllowNewConst and some staging for future fmf usage.
Reviewers: spatel, hfinkel, wristow
Reviewed By: spatel
Subscribers: nhaehnle
Differential Revision: https://reviews.llvm.org/D48289
llvm-svn: 334984
Summary: This patch originated from D47388 and is a proper subset of the originating changes, containing only the fmf optimization guard extensions.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar, rampitec, nhaehnle, nemanjai
Reviewed By: rampitec, nhaehnle
Subscribers: tpr, nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47918
llvm-svn: 334876
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47954
llvm-svn: 334862
Summary:
Here we relax the old constraint which utilized unsafe with the TargetOption flag HonorSignDependentRoundingFPMathOption, with the assertion that unsafe is no longer needed or never was required for correctness on FDIV/FMUL.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: efriedma, wdng, tpr
Differential Revision: https://reviews.llvm.org/D48057
llvm-svn: 334769
Summary: A FMF constraint is added to FADD with unsafe still available as the fallback
Reviewers: spatel, wristow, arsenm, hfinkel
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D48180
llvm-svn: 334753
We're constant folding here, so we shouldn't check uses. This matches
the IR optimizer behavior.
The x86 test shows the expected win. The AArch64 test shows something
else. This only seems to happen if the "generic" AArch64 CPU model is
used by MachineCombiner, so I'll file a bug report to follow-up.
llvm-svn: 334608
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fmul.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: nhaehnle, wdng
Differential Revision: https://reviews.llvm.org/D47911
llvm-svn: 334514
Implement default legalization of rotates: either in terms of the rotation
in the opposite direction (if legal), or in terms of shifts and ors.
Implement generating of rotate instructions for Hexagon. Hexagon only
supports rotates by an immediate value, so implement custom lowering of
ROTL/ROTR on Hexagon. If a rotate is not legal, use the default expansion.
Differential Revision: https://reviews.llvm.org/D47725
llvm-svn: 334497
This would fail before because 1x vectors aren't legal,
so instead just use the scalar type.
Avoids regressions in a future AMDGPU commit to add
v4i16/v4f16 as legal types.
Test update is just the one test that this triggers
on in tree now. It wasn't checking anything before.
The result is completely changed since the selects
are eliminated. Not sure if it's considered better
or not.
llvm-svn: 334440
This patch started off much more general and ambitious, but it's been a nightmare
seeing all the ways x86 vector codegen can go wrong.
So the code is still structured to allow extending easily, but it's currently
limited in several ways:
1. Only handle cases with an extending load.
2. Only handle cases with a zero constant compare.
3. Ignore setcc with vector bitmask (SetCCWidth != 1) - so AVX512 should be unaffected.
The motivating case from PR37427:
https://bugs.llvm.org/show_bug.cgi?id=37427
...is the 1st test, and that shows the expected win - we eliminated the unnecessary
intermediate cast.
There's a clear regression in the last test (sgt_zero_fp_select) because we longer
recognize a 'SHRUNKBLEND' opportunity. I think that general problem is also present
in sgt_zero, so I'll try to fix that in a follow-up. We need to match a sign-bit
setcc from a sign-extended operand and remove it.
Differential Revision: https://reviews.llvm.org/D47330
llvm-svn: 334378
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fsub.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D47910
llvm-svn: 334306
While trying to propagate AND masks back to loads, we currently allow
one non-load node to be included as a leaf in chain. This fix now
limits that node to produce only a single data value.
Differential Revision: https://reviews.llvm.org/D47878
llvm-svn: 334268
Summary: This change uses fmf subflags to guard fma optimizations as well as unsafe. These changes originated from D46483 and have been simplified via getNode.
Reviewers: spatel, arsenm, hfinkel, javed.absar
Reviewed By: spatel
Subscribers: nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47388
llvm-svn: 334242
This avoids regressions in a future AMDGPU change
to make v4i16/v4f16 legal. For these types, build_vector
is implemented as bitcasted operations on v2i32. This
combine was creating v4i16s out of what would have been
already been a v2i32 build_vector, creating a mess
of nodes that never get cleaned up.
I'm not sure this is the right condition to check.
I initially tried just checking for the legality of the
new build_vector. This works for my case, but breaks dozens
of x86 tests. A Mips test seems to show some improvement
or at least a neutral change. I don't want to think
about how long it would take to analyze the set of
different x86 vector operations impacted.
Test included in future commit.
llvm-svn: 334218
Summary:
This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
It contains only context for fsqrt.
Reviewers: spatel, hfinkel, arsenm
Reviewed By: spatel
Subscribers: hfinkel, wdng, andrew.w.kaylor, wristow, efriedma, nemanjai
Differential Revision: https://reviews.llvm.org/D47749
llvm-svn: 334113
Summary: This include variant for add, uaddo and addcarry. usubo and subcarry require the carry to be flipped to preserve semantic, but we chose to do the transform anyway in that case as to push the transform down the carry chain.
Reviewers: efriedma, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46505
llvm-svn: 333943
Summary: It has been deprecated in favor of SETCCCARRY for a year now and isn't used by any in tree backend.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47685
llvm-svn: 333939
Summary:
As pointed out in D46528, we errneously transform cases like `xor X, -1`,
even though we use said function.
It's because the `-1` is actually a bitcast there.
So i think we can just look through it in the function.
Differential Revision: https://reviews.llvm.org/D47156
llvm-svn: 332905
Summary:
This **appears** to be the last missing piece for the masked merge pattern handling in the backend.
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andps`+`andnps` / `bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`), and we need to make sure that they are generated.
Differential Revision: https://reviews.llvm.org/D46528
llvm-svn: 332904
SimplifyDemandedBits can remove bits from the masks for the shift amounts we need to see to detect rotates.
This patch uses zeroes from computeKnownBits to fill in some of these mask bits to make the match work.
As currently written this calls computeKnownBits even when the mask hasn't been simplified because it made the code simpler. If we're worried about compile time performance we can improve this.
I know we're talking about making a rotate intrinsic, but hopefully we can go ahead and do this change and just make sure the rotate intrinsic also handles it.
Differential Revision: https://reviews.llvm.org/D47116
llvm-svn: 332895
As part of merging stores we check that fusing the nodes does not
cause a cycle due to one candidate store being indirectly dependent on
another store (this may happen via chained memory copies). This is
done by searching if a store is a predecessor to another store's
value.
Prune the search at the candidate search's root node which is a
predecessor to all candidate stores. This reduces the
size of the subgraph searched in large basic blocks.
Reviewers: jyknight
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46955
llvm-svn: 332490
search. NFCI.
Migrate single-use and non-volatility, non-indexed requirements on
stores of immediate store values to candidate collection pass from
later stage.
llvm-svn: 332392
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).
Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.
ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.
This was suggested by Adrian in https://reviews.llvm.org/D45995.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46216
llvm-svn: 332119
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
Part of the logic for combining (zext (load ...)) and (sext (load ...))
is duplicated. This creates problems because bugs in one version have to
be fixed again in the other version.
To address this, as a first step, I've extracted the duplicate logic
into a helper. I'll fix the debug location bug in the helper and
eliminate the copy of its logic in a followup.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46157
llvm-svn: 332117
Summary:
The combine in rebuildSetCC may be combined to another
node leaving our references stale. Keep a handle on
it to avoid stale references.
Fixes PR36602.
Reviewers: dbabokin, RKSimon, eli.friedman, davide
Subscribers: hiraditya, uabelho, JesperAntonsson, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D46404
llvm-svn: 331985
