This rows back on r288120, r291801 and r292110. I apologize in advance
for the churn. All of those revisions where meant to make the wrapping
of RHS expressions more consistent. However, now that they are
consistent, we seem to be a bit too eager.
The reasoning here is that I think it is generally correct that we want
to line-wrap before multiline RHS expressions (or multiline arguments to
a function call). However, if there are only two of such operands or
arguments, there is always a clear vertical separation between them and
the additional line break seems much less desirable.
Somewhat good examples are expressions like:
EXPECT_EQ(2, someLongExpression(
orCall));
llvm-svn: 293752
Summary:
The reflower didn't measure precisely the line column of a line in the middle of
a line comment section that has a prefix that needs to be adapted.
source:
```
/// a
//b
```
format before:
```
/// a
//b
```
format after:
```
/// a
// b
```
Reviewers: djasper
Reviewed By: djasper
Subscribers: sammccall, cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D29329
llvm-svn: 293641
Summary:
The reflower was not taking into account the additional leading whitespace in block comment lines.
source:
```
{
/*
* long long long long
* long
* long long long long
*/
}
```
format (with column limit 20) before:
```
{
/*
* long long long
* long long long long
* long long
*/
}
```
format after:
```
{
/*
* long long long
* long long long
* long long long
*/
}
```
Reviewers: djasper, klimek
Reviewed By: djasper
Subscribers: cfe-commits, sammccall, klimek
Differential Revision: https://reviews.llvm.org/D29326
llvm-svn: 293633
Summary:
This fixes a regression that causes example:
```
enum A {
a, // line a
// line b
b
};
```
to be formatted as follows:
```
enum A {
a, // line a
// line b
b
};
```
Reviewers: djasper, klimek
Reviewed By: klimek
Subscribers: cfe-commits, sammccall, djasper, klimek
Differential Revision: https://reviews.llvm.org/D29322
llvm-svn: 293624
Summary:
This patch stops reflowing comment lines starting with '@', since they commonly
have a special meaning.
Reviewers: djasper
Reviewed By: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D29323
llvm-svn: 293617
Summary:
Consider formatting the following code fragment with column limit 20:
```
{
// line 1
// line 2\
// long long long line
}
```
Before this fix the output is:
```
{
// line 1
// line 2\
// long long
long line
}
```
This patch fixes a regression that breaks the last comment line without
adding the '//' prefix.
Reviewers: djasper
Reviewed By: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D29298
llvm-svn: 293548
Summary:
The following two comment lines form a single comment section:
```
if (1) { // line 1
// line 2
}
```
This is because the break of a comment section was based on the original column
of the first token of the previous line (in this case, the 'if').
This patch splits these two comment lines into different sections by taking into
account the original column of the right brace preceding the first line comment
where applicable.
Reviewers: djasper
Reviewed By: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D29291
llvm-svn: 293539
Summary:
This presents a version of the comment reflowing with less mutable state inside
the comment breakable token subclasses. The state has been pushed into the
driving breakProtrudingToken method. For this, the API of BreakableToken is enriched
by the methods getSplitBefore and getLineLengthAfterSplitBefore.
Reviewers: klimek
Reviewed By: klimek
Subscribers: djasper, klimek, mgorny, cfe-commits, ioeric
Differential Revision: https://reviews.llvm.org/D28764
llvm-svn: 293055
This fixes clang-format not formatting if fallback-style is explicitly set to
"none", and either a config file is found or YAML is passed in without a
"BasedOnStyle". With this change, passing "none" in these cases will have no
affect, and LLVM style will be used as the base style.
Differential Revision: https://reviews.llvm.org/D28844
llvm-svn: 292562
Change the contract of GetStyle so that it returns an error when an error occurs
(i.e. when it writes to stderr), and only returns the fallback style when it
can't find a configuration file.
Differential Revision: https://reviews.llvm.org/D28081
llvm-svn: 292174
Before:
aaaaaaaaaaaaaaaaaa(aaaaaaaa, aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa::
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
aaaaaaaaaaaaaaaaaaaaa);
After:
aaaaaaaaaaaaaaaaaa(aaaaaaaa,
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa::
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
aaaaaaaaaaaaaaaaaaaaa);
No new test cases, as the existing ones cover this fairly well.
llvm-svn: 292110
Here, the optimization to not line wrap when it would not lead to a
reduction in columns was overwriting and enforced break that we want to
do no matter what.
Before:
int i = someFunction(
aaaaaaa,
0).aaa(aaaaaaaaaaaaa) *
aaaaaaa +
aaaaaaa;
After:
int i = someFunction(aaaaaaa, 0)
.aaa(aaaaaaaaaaaaa) *
aaaaaaa +
aaaaaaa;
llvm-svn: 291974
Specifically, wrap before them if they are multi-line so that we don't
create long hanging indents. This prevents having a lot of code
indented a lot in some cases.
Before:
someFunction(Param, {List1, List2,
List3});
After:
someFunction(Param,
{List1, List2,
List3});
llvm-svn: 291801
Modify getStyle to use vfs::FileSystem::makeAbsolute just like FS.addFile does,
rather than sys::fs::make_absolute. The latter gets the CWD from the platform,
while the former expects it to be set by the client, causing a mismatch when
converting relative paths to absolute.
Differential Revision: https://reviews.llvm.org/D27971
llvm-svn: 290319
Members that are themselves wrapped in fake parentheses would lead to
AvoidBinPacking be set on the wrong ParenState.
After:
vector<int> aaaa = {
aaaaaa.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
aaaaaa.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
aaaaaa.aaaaaaa,
aaaaaa.aaaaaaa,
aaaaaa.aaaaaaa,
aaaaaa.aaaaaaa,
};
Before we were falling back to bin-packing these.
llvm-svn: 290259
While for <<-operators often used in log statments, a single key value
pair is always on the second operator, e.g.
llvm::errs() << "aaaaa=" << aaaaa;
It is on the first operator for plus- or comma-concatenated strings:
string s = "aaaaaaaaaa: " + aaaaaaaa;
(the "=" not counting because that's a different operator precedence)
llvm-svn: 290177
Before:
SomeLongLoggingStatementOrMacro() << "Some long text "
<< some_variable << "\n";
Before:
SomeLongLoggingStatementOrMacro()
<< "Some long text " << some_variable << "\n";
Short logging statements are already special cased in a different part
of the code.
llvm-svn: 290094
We still want to try in linewrap within single elements of a 1-column
list.
After:
Type *Params[] = {PointerType::getUnqual(FunctionType::get(
Builder.getVoidTy(), Builder.getInt8PtrTy(), false)),
Builder.getInt8PtrTy(),
Builder.getInt32Ty(),
LongType,
LongType,
LongType};
Before:
No line break in the first element, so column limit violation.
llvm-svn: 290090
column limit.
Single-column layout basically means that we format the list with one
element per line. Not doing that when there is a column limit violation
doesn't change the fact that there is an item that doesn't fit within
the column limit.
Before (with a column limit of 30):
std::vector<int> a = {
aaaaaaaa, aaaaaaaa,
aaaaaaaa, aaaaaaaa,
aaaaaaaaaa, aaaaaaaa,
aaaaaaaaaaaaaaaaaaaaaaaaaaa};
After:
std::vector<int> a = {
aaaaaaaa,
aaaaaaaa,
aaaaaaaa,
aaaaaaaa,
aaaaaaaaaa,
aaaaaaaa,
aaaaaaaaaaaaaaaaaaaaaaaaaaa};
(and previously we would have formatted like "After" it wasn't for the one
item that is too long)
llvm-svn: 290084
While C(++) and ObjC are generally formatted the same way and can be
mixed, people might want to choose different styles based on the
language. This patch recognizes .m and .mm files as ObjC and also
implements a very crude detection of whether or not a .h file contains
ObjC code. This can be improved over time.
Also move most of the ObjC tests into their own test file to keep file
size maintainable.
llvm-svn: 289428
Specifically, if the RHS of a comma is a complex binary expression and
spans multiple lines, insert a line break before it. This usually is
often more readable compared to producing a hanging indent. See changes
in FormatTest.cpp for examples.
llvm-svn: 288120
Actual regression was introduced in r272668. This revision fixes JS script, but
also regress Cpp case. It manifests with spaces added when template is followed
with array. Bug 30527 mentions case of array as a nested template type
(foo<bar<baz>[]>). Fix is to detect such case and to prevent treating it as
array initialization, but as a subscript case. However, before r272668, this
case was treated simple because we were detecting it as a StartsObjCMethodExpr.
Same was true for other similar case - array of templates (foo<int>[]). This
patch tries to address two problems: 1) fixing regression 2) making sure both
cases (array as a nested type, array of templates) which were entering
StartsObjCMethodExpr branch are handled now appropriately.
https://reviews.llvm.org/D26163
Patch from Branko Kokanovic <branko@kokanovic.org>!
llvm-svn: 286507
Summary:
During clang-format source lexing >> and << operators are split and
treated as two less/greater operators but column position of following
tokens was not adjusted accordingly.
Fixes PR26887
Patch by Paweł Żukowski.
Reviewers: djasper
Subscribers: malcolm.parsons, mprobst, klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D25439
llvm-svn: 285934
Reasoning:
- ExpressionParser uses a lot of stack for these, bad in some environments.
- Our formatting algorithm is N^3 and gets really slow.
- The resulting formatting is unlikely to be any good.
- This is probably generated code we're formatting by accident.
We treat these as unparseable, and signal incomplete formatting. 50 is
an arbitrary number, I've only seen real problems from ~150 levels.
Patch by Sam McCall. Thank you.
llvm-svn: 285570
Fixes the following:
BOOL (^aaa)(void) = ^BOOL {
};
The first BOOL's token was getting set to TT_FunctionAnnotationRParen
incorrectly, which was causing an unexpected newline after (^aaa). This
was introduced in r245846.
Patch by Kent Sutherland, thank you!
llvm-svn: 282448
Summary:
This is required for compliance with the Mozilla style guide.
This is a rebase+minor change of Birunthan Mohanathas's patch
Reviewers: djasper
Subscribers: klimek, cfe-commits, opilarium
Differential Revision: https://reviews.llvm.org/D23317
llvm-svn: 278121
Summary:
- Implement clang::tooling::Replacements as a class to provide interfaces to
control how replacements for a single file are combined and provide guarantee
on the order of replacements being applied.
- tooling::Replacements only contains replacements for the same file now.
Use std::map<std::string, tooling::Replacements> to represent multi-file
replacements.
- Error handling for the interface change will be improved in followup patches.
Reviewers: djasper, klimek
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D21748
llvm-svn: 277335
Summary:
return llvm::Expected<> to carry error status and error information.
This is the first step towards introducing "Error" into tooling::Replacements.
Reviewers: djasper, klimek
Subscribers: ioeric, klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D21601
llvm-svn: 275062
Before (when aligning & to the right):
SomeType MemberFunction(const Deleted &) const&;
After:
SomeType MemberFunction(const Deleted &) const &;
This also applies to variable declarations, e.g.:
int const * a;
However, this form is very uncommon (most people would write
"const int* a" instead) and contracting to "const*" might actually send
the wrong signal of what the const binds to.
llvm-svn: 272537
Summary:
After applying replacements, redundant code like extra commas or empty namespaces
might be introduced. Fixer can detect and remove any redundant code introduced by replacements.
The current implementation only handles redundant commas.
Reviewers: djasper, klimek
Subscribers: ioeric, mprobst, klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D18551
llvm-svn: 267416
Indentation of the last line was reset to the initial indentation of the block when reaching EOF.
Patch by Maxime Beaulieu
Differential Revision: http://reviews.llvm.org/D19065
llvm-svn: 266321
While I am not personally convinced about the usefulness of this
construct, we should break it.
Before:
if (a) label:
f();
After:
if (a)
label:
f();
llvm-svn: 265545
Summary:
formatAndApplyAllReplacements takes a set of Replacements, applies them on a
Rewriter, and reformats the changed code.
Reviewers: klimek, djasper
Subscribers: ioeric, klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D17852
llvm-svn: 264745
Summary:
Previously, format::getStyle assumes that the given file resides in
the real file system, which prevents the use of virtual file system in testing etc.
This patch adds a parameter in format::getStyle interface so that users can specify
the right file system. By default, the file system is the real file system.
Reviewers: djasper, klimek
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D18399
llvm-svn: 264253
This patch adds a regular expression to configure suffixes of an
included file to check whether it is the "main" include of the current
file. Previously, clang-format has allowed arbitrary suffixes on the
formatted file, which is still the case when no IncludeMainRegex is
specified.
llvm-svn: 263943
If a call takes a single argument, using AlwaysBreak can lead to lots
of wasted lines and additional indentation without improving the
readability in a significant way.
Before:
caaaaaaaaaaaall(
caaaaaaaaaaaall(
caaaaaaaaaaaall(
caaaaaaaaaaaaaaaaaaaaaaall(aaaaaaaaaaaaaa, aaaaaaaaa))));
After:
caaaaaaaaaaaall(caaaaaaaaaaaall(caaaaaaaaaaaall(
caaaaaaaaaaaaaaaaaaaaaaall(aaaaaaaaaaaaaa, aaaaaaaaa))));
llvm-svn: 263709
Turns "foo" into 'foo' (or vice versa, depending on configuration).
This makes it more convenient to follow the Google JavaScript style
guide:
https://google.github.io/styleguide/javascriptguide.xml?showone=Strings#Strings
This functionality is behind the option "JavaScriptQuotes", which can be:
* "leave" (no re-quoting)
* "single" (change to single quotes)
* "double" (change to double quotes)
This also changes single quoted JavaScript string literals to be treated
as tok::string_literal, not tok::char_literal, which fixes two unrelated
tests.
Patch by Martin Probst. Thank you.
llvm-svn: 262534
This is a commonly useful feature to have, and we have implemented it
multiple times with different kinds of bugs. This implementation
centralizes the idea in a set of functions that we can then use from the various
tools.
Reverts r262234, which is a revert of r262232, and puts the functions
into FOrmat.h, as they are closely coupled to clang-format, and we
otherwise introduce a cyclic dependency between libFormat and
libTooling.
Patch by Eric Liu.
llvm-svn: 262323
In particular, make it more expensive than breaking after the return
type of a function definition/declaration.
Before:
template <typename T>
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaa<
T>::aaaaaaaaaaaaa(aaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaa);
After:
template <typename T>
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaa<T>::aaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaa);
llvm-svn: 260497
Before:
int i = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ?
/*bbbbbbbbbbbbbbbbbbbb=*/bbbbbbbbbbbbbbbbbbbbbbbbb :
ccccccccccccccccccccccccccc;
After:
int i = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ?
/*bbbbbbbbbbbbbbbbbbbb=*/bbbbbbbbbbbbbbbbbbbbbbbbb :
ccccccccccccccccccccccccccc;
llvm-svn: 259670
After reading the style guides again, they don't actually say how to
pack or not pack array literals. Based on some user reports, array
initializers can unnecessarily get quite long if they contain many
small elements. Array literals with trailing commas are still formatted
one per line so that users have a way to opt out of the packing.
Before:
var array = [
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa
];
After:
var array = [
aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa,
aaaaaa, aaaaaa
];
llvm-svn: 257615
As soon as a comment had whitespace changes inside of the token, we
couldn't identify the whole comment as a trailing comment anymore and
alignment stopped working. Add a new boolean to Change for this special
case and fix trailing comment identification to use it.
This also changes WhitespaceManager to sum the length of all Changes
inside of a token into the first Change.
Before this fix
int xy; // a
int z; //b
became
int xy; // a
int z; // b
with this patch we immediately get to:
int xy; // a
int z; // b
Differential Revision: http://reviews.llvm.org/D16058
llvm-svn: 257341
r257257 change the way clang-format enforces line breaks after a
templated type has been line-wrapped. This was to fix an incorrect line
break if BinPackParameters is set to false. However, it also leads to
an unwanted line break in a different case. Thus, for now, only do this
when BinPackParameters is false. This isn't ideal yet, but helps us
until we have a better solution.
With BinPackParameters:
Before:
void fffffffffff(aaaaaaaaaaaaaaaaaaaaaaaaaaa<aaaaaaaaaaaaaaaaaaaaaaa,
aaaaaaaaaa> aaaaaaaaaa);
After:
void fffffffffff(
aaaaaaaaaaaaaaaaaaaaaaaaaaa<aaaaaaaaaaaaaaaaaaaaaaa, aaaaaaaaaa>
aaaaaaaaaa);
llvm-svn: 257325
Before (example is JS, but also applies to C++):
return [
aaaa()
.bbbbbbbb('A'),
aaaa().bbbbbbbb('B'),
aaaa().bbbbbbbb('C'),
];
After:
return [
aaaa().bbbbbbbb('A'),
aaaa().bbbbbbbb('B'),
aaaa().bbbbbbbb('C'),
];
llvm-svn: 257079
