This already worked if only one register piece was used,
but didn't if a type was split into multiple, unequal
sized pieces.
Fixes not splitting 3i16/v3f16 into two registers for
AMDGPU.
This will also allow fixing the ABI for 16-bit vectors
in a future commit so that it's the same for all subtargets.
llvm-svn: 341801
If an ABI-like value is used in a different block,
the type split used is not necessarily the same as
the call's ABI. The value is used through an intermediate
copy virtual registers from the other block. This
resulted in copies with inconsistent sizes later.
Fixes regressions since r338197 when AMDGPU started
splitting vector types for calls.
llvm-svn: 341018
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
Summary:
Catchpads and cleanuppads are not funclet entries; they are only EH
scope entries. We already dont't set `isEHFuncletEntry` for catchpads.
This patch does the same thing for cleanuppads.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50654
llvm-svn: 340330
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
Similar to rL337966 - if the DAGCombiner's rotate matching was
working as expected, I don't think we'd see any test diffs here.
AArch only goes right, and PPC only goes left.
x86 has both, so no diffs there.
Differential Revision: https://reviews.llvm.org/D50091
llvm-svn: 339359
Summary: Extend fix for PR34170 to support inline assembly with multiple output operands that do not naturally go in the register class it is constrained to (eg. double in a 32-bit GPR as in the PR).
Reviewers: bogner, t.p.northover, lattner, javed.absar, efriedma
Reviewed By: efriedma
Subscribers: efriedma, tra, eraman, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45437
llvm-svn: 339225
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
The bug is visible in the constant-folded x86 tests. We can't use the
negated shift amount when the type is not power-of-2:
https://rise4fun.com/Alive/US1r
...so in that case, use the regular lowering that includes a select
to guard against a shift-by-bitwidth. This path is improved by only
calculating the modulo shift amount once now.
Also, improve the rotate (with power-of-2 size) lowering to use
a negate rather than subtract from bitwidth. This improves the
codegen whether we have a rotate instruction or not (although
we can still see that we're not matching to a legal rotate in
all cases).
llvm-svn: 338592
Correct the address space for the inserted argument
stack slot.
AMDGPU seems to not do anything with this information,
so I don't think this was breaking anything.
llvm-svn: 338428
This reapplies commit r338206 reverted by r338214 since the bug that
r338206 uncovered has been fixed in r338268.
Add support for inline assembly with matching input operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR). Note that regular input is already handled by existing
code.
llvm-svn: 338269
Add support for inline assembly with matching input operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR). Note that regular input is already handled by existing
code.
llvm-svn: 338206
Masked loads are calling DAG.getRoot rather than calling SelectionDAGBuilder::getRoot, which means the PendingLoads weren't emptied to update the root and create any needed TokenFactor. So it would be incorrect to call setRoot for the masked load.
This patch instead adds the masked load to PendingLoads so that the root doesn't get update until a store or scatter or something happens.. Alternatively, we could call SelectionDAGBuilder::getRoot before it, but that would create unnecessary serialization.
llvm-svn: 338085
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
If the DAGCombiner's rotate matching was working as expected,
I don't think we'd see any test diffs here.
This sidesteps the issue of custom lowering for rotates raised in PR38243:
https://bugs.llvm.org/show_bug.cgi?id=38243
...by only dealing with legal operations.
llvm-svn: 337966
Add support for inline assembly with output operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR as in the PR).
llvm-svn: 337903
This is used on an extract vector element index which is most cases is going to be an i32 or i64 and the element will be a valid element number. But it is possible to construct IR with a larger type and large out of range value.
llvm-svn: 337652
As discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123292.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2018-July/124400.html
We want to add rotate intrinsics because the IR expansion of that pattern is 4+ instructions,
and we can lose pieces of the pattern before it gets to the backend. Generalizing the operation
by allowing 2 different input values (plus the 3rd shift/rotate amount) gives us a "funnel shift"
operation which may also be a single hardware instruction.
Initially, I thought we needed to define new DAG nodes for these ops, and I spent time working
on that (much larger patch), but then I concluded that we don't need it. At least as a first
step, we have all of the backend support necessary to match these ops...because it was required.
And shepherding these through the IR optimizer is the primary concern, so the IR intrinsics are
likely all that we'll ever need.
There was also a question about converting the intrinsics to the existing ROTL/ROTR DAG nodes
(along with improving the oversized shift documentation). Again, I don't think that's strictly
necessary (as the test results here prove). That can be an efficiency improvement as a small
follow-up patch.
So all we're left with is documentation, definition of the IR intrinsics, and DAG builder support.
Differential Revision: https://reviews.llvm.org/D49242
llvm-svn: 337221
This is marginally helpful for removing redundant extensions, and the
code is easier to read, so it seems like an all-around win. In the new
test i8-phi-ext.ll, we used to emit an AssertSext i8; now we emit an
AssertZext i2, which allows the extension of the return value to be
eliminated.
Differential Revision: https://reviews.llvm.org/D49004
llvm-svn: 336868
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
Add NoTrapAfterNoreturn target option which skips emission of traps
behind noreturn calls even if TrapUnreachable is enabled.
Enable the feature on Mach-O to save code size; Comments suggest it is
not possible to enable it for the other users of TrapUnreachable.
rdar://41530228
DifferentialRevision: https://reviews.llvm.org/D48674
llvm-svn: 335877
Summary:
In some cases, these operands lacked the IsDebug property, which is meant to signal that
they should not affect codegen. This patch adds a check for this property in the
MachineVerifier and adds it where it was missing.
This includes refactorings to use MachineInstrBuilder construction functions instead of
manually setting up the intrinsic everywhere.
Patch by: JesperAntonsson
Reviewers: aprantl, rnk, echristo, javed.absar
Reviewed By: aprantl
Subscribers: qcolombet, sdardis, nemanjai, JDevlieghere, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D48319
llvm-svn: 335214
Summary:
If we get an error building the SelectionDAG for inline assembly we try to continue and still build the DAG.
But if the return type for the inline assembly is a struct we end up crashing because we try to create an UNDEF node with a struct type which isn't valid.
Instead we need to create an UNDEF for each element of the struct and join them with merge_values.
This patch relies on single operand merge_values being handled gracefully by getMergeValues. If the return type is void there will be no VTs returned by ComputeValueVTs and now we just return instead of calling setValue. Hopefully that's ok, I assumed nothing would need to look up the mapped value for void node.
Fixes PR37359
Reviewers: rengolin, rovka, echristo, efriedma, bogner
Reviewed By: efriedma
Subscribers: craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D46560
llvm-svn: 335093
Summary:
This lowers exception catching-related instructions:
1. Lowers `wasm.catch` intrinsic to `catch` instruction
2. Removes `catchpad` and `cleanuppad` instructions; they are not
necessary after isel phase. (`MachineBasicBlock::isEHFuncletEntry()` or
`MachineBasicBlock::isEHPad()` can be used instead.)
3. Lowers `catchret` and `cleanupret` instructions to pseudo `catchret`
and `cleanupret` instructions in isel, which will be replaced with other
instructions in `WebAssemblyExceptionPrepare` pass.
4. Adds 'WebAssemblyExceptionPrepare` pass, which is for running various
transformation for EH. Currently this pass only replaces `catchret` and
`cleanupret` instructions into appropriate wasm instructions to make
this patch successfully run until the end.
Currently this does not handle lowering of intrinsics related to LSDA
info generation (`wasm.landingpad.index` and `wasm.lsda`), because they
cannot be tested without implementing `EHStreamer`'s wasm-specific
handlers. They are marked as TODO, which is needed to make isel pass.
Also this does not generate `try` and `end_try` markers yet, which will
be handled in later patches.
This patch is based on the first wasm EH proposal.
(https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md)
Reviewers: dschuff, majnemer
Subscribers: jfb, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44090
llvm-svn: 333705
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
llvm-svn: 333440
Summary:
There are functions using the term 'funclet' to refer to both
1. an EH scopes, the structure of BBs that starts with
catchpad/cleanuppad and ends with catchret/cleanupret, and
2. a small function that gets outlined in AsmPrinter, which is the
original meaning of 'funclet'.
So far the two have been the same thing; EH scopes are always outlined
in AsmPrinter as funclets at the end of the compilation pipeline. But
now wasm also uses scope-based EH but does not outline those, so we now
need to correctly distinguish those two use cases in functions.
This patch splits `MachineBasicBlock::isFuncletEntry` into
`isFuncletEntry` and `isEHScopeEntry`, and
`MachineFunction::hasFunclets` into `hasFunclets` and `hasEHScopes`, in
order to distinguish the two different use cases. And this also changes
some uses of the term 'funclet' to 'scope' in `getFuncletMembership` and
change the function name to `getEHScopeMembership` because this function
is not about outlined funclets but about EH scope memberships.
This change is in the same vein as D45559.
Reviewers: majnemer, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D47005
llvm-svn: 333045
This is a simple hack based on what's proposed in D37686, but we can extend it if needed in follow-ups.
It gets us most of the FMF functionality that we want without adding any state bits to the flags. It
also intentionally leaves out non-FMF flags (nsw, etc) to minimize the patch.
It should provide a superset of the functionality from D46563 - the extra tests show propagation and
codegen diffs for fcmp, vecreduce, and FP libcalls.
The PPC log2() test shows the limits of this most basic approach - we only applied 'afn' to the last
node created for the call. AFAIK, there aren't any libcall optimizations based on the flags currently,
so that shouldn't make any difference.
Differential Revision: https://reviews.llvm.org/D46854
llvm-svn: 332358
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
There's only one use of this currently, but that could
change with D46563. Either way, we shouldn't have to
update code outside of the flags struct when those
flag definitions change.
llvm-svn: 332155
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
In order to convert LLVM IR to MachineInstr, we need a new TargetOpcode,
DBG_LABEL, to ‘lower’ intrinsic llvm.dbg.label. The patch
creates this new TargetOpcode and convert intrinsic llvm.dbg.label to
MachineInstr through SelectionDAG.
In SelectionDAG, debug information is stored in SDDbgInfo. We create a
new data member of SDDbgInfo for labels and use the new data member,
SDDbgLabel, to create DBG_LABEL MachineInstr.
The new DBG_LABEL MachineInstr uses label metadata from LLVM IR as its
parameter. So, the backend could get metadata information of labels from
DBG_LABEL MachineInstr.
Differential Revision: https://reviews.llvm.org/D45341
Patch by Hsiangkai Wang.
llvm-svn: 331842
Summary: Adding support for Fast flags in the SDNode to leverage fast math sub flag usage.
Reviewers: spatel, arsenm, jbhateja, hfinkel, escha, qcolombet, echristo, wristow, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits, rampitec, nhaehnle, tstellar, FarhanaAleen, nemanjai, javed.absar, jbhateja, hfinkel, wdng
Differential Revision: https://reviews.llvm.org/D45710
llvm-svn: 331547
Summary:
Added a helper method in RegsForValue to get a list with
all the <RegNumber, RegSize> pairs that we want to iterate
over in SelectionDAGBuilder::EmitFuncArgumentDbgValue and
in SelectionDAGBuilder::visitIntrinsicCall.
Reviewers: vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46360
llvm-svn: 331510
Summary:
This reverts SVN r331441 (reapplies r331337), together with a fix
in to handle an already existing fragment expression in the
dbg.value that must be fragmented due to a split PHI node.
This should solve the problem seen in PR37321, which was the
reason for the revert of r331337.
The situation in PR37321 is that we have a PHI node like this
%u.sroa = phi i80 [ %u.sroa.x, %if.x ],
[ %u.sroa.y, %if.y ],
[ %u.sroa.z, %if.z ]
and a dbg.value like this
call void @llvm.dbg.value(metadata i80 %u.sroa,
metadata !13,
metadata !DIExpression(DW_OP_LLVM_fragment, 0, 80))
The phi node is split into three 32-bit PHI nodes
%30:gr32 = PHI %11:gr32, %bb.4, %14:gr32, %bb.5, %27:gr32, %bb.8
%31:gr32 = PHI %12:gr32, %bb.4, %15:gr32, %bb.5, %28:gr32, %bb.8
%32:gr32 = PHI %13:gr32, %bb.4, %16:gr32, %bb.5, %29:gr32, %bb.8
but since the original value only is 80 bits we need to adjust the size
of the last fragment expression, and with this patch we get
DBG_VALUE debug-use %30:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 0, 32)
DBG_VALUE debug-use %31:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 32, 32)
DBG_VALUE debug-use %32:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 64, 16)
Reviewers: vsk, aprantl, mstorsjo
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46384
llvm-svn: 331464
Summary:
This is a follow up to rL331182. A PHI node can be split up into
several MIR PHI nodes when being selected. When there is a
dbg.value intrinsic that uses the result of such a PHI node we
need to select several DBG_VALUE instructions, with fragment
expressions, in order to do a correct selection.
Reviewers: rnk, aprantl, vsk
Reviewed By: vsk
Subscribers: mattd, llvm-commits, JDevlieghere, aprantl, gbedwell, rnk
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D46329
llvm-svn: 331337
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
Summary:
This just refactors the lowering of the atomic memory intrinsics to more
closely match the code patterns used in the lowering of the non-atomic
memory intrinsics. Specifically, we encapsulate the lowering in
SelectionDAG::getAtomicMem*() functions rather than embedding
the code directly in the SelectionDAGBuilder code.
llvm-svn: 330603
