Commit Graph

652 Commits

Author SHA1 Message Date
Simon Pilgrim
1b81064d1e Fix signed/unsigned comparison warning. NFCI.
llvm-svn: 325363
2018-02-16 17:26:59 +00:00
Simon Pilgrim
5d005a359e Fix signed/unsigned comparison warning. NFCI.
llvm-svn: 325359
2018-02-16 16:52:50 +00:00
Simon Pilgrim
ff53a4a234 [SelectionDAG] Enable SimplifyDemandedVectorElts support for simplifying shuffle masks
Based off the DemandedElts mask the and UNDEF elements returned from the SimplifyDemandedVectorElts calls to the shuffle operands, we can attempt to simplify the shuffle mask.

I had to be very conservative here as accepting post-legalized shuffle masks could cause problems for targets that legalize UNDEF mask elements back to inrange values (PowerPC), similarly combining to identity shuffle masks could cause too much UNDEF information to disappear for later combines.

llvm-svn: 325354
2018-02-16 16:22:14 +00:00
Simon Pilgrim
0ffde50f9c [SelectionDAG] Add initial SimplifyDemandedVectorElts support for simplifying VSELECT operands
This just adds a basic pass through - we can add constant selection mask handling in a future patch to fully match InstCombine.

llvm-svn: 325338
2018-02-16 12:21:08 +00:00
Simon Pilgrim
80663ee986 [SelectionDAG] Add initial implementation of TargetLowering::SimplifyDemandedVectorElts
This is mainly a move of simplifyShuffleOperands from DAGCombiner::visitVECTOR_SHUFFLE to create a more general purpose TargetLowering::SimplifyDemandedVectorElts implementation.

Further features can be moved/added in future patches.

Differential Revision: https://reviews.llvm.org/D42896

llvm-svn: 325232
2018-02-15 12:14:15 +00:00
Craig Topper
5ecea9fff5 [SelectionDAG] Remove duplicate code from TargetLowering::SimplifySetCC.
This exact code already exists a little further up.

llvm-svn: 325101
2018-02-14 06:51:57 +00:00
Sanjay Patel
eb8c408e50 [TargetLowering] try to create -1 constant operand for math ops via demanded bits
This reverses instcombine's demanded bits' transform which always tries to clear bits in constants.

As noted in PR35792 and shown in the test diffs:
https://bugs.llvm.org/show_bug.cgi?id=35792
...we can do better in codegen by trying to form -1. The x86 sub test shows a missed opportunity. 

I did investigate changing instcombine's behavior, but it would be more work to change 
canonicalization in IR. Clearing bits / shrinking constants can allow killing instructions, 
so we'd have to figure out how to not regress those cases.

Differential Revision: https://reviews.llvm.org/D42986

llvm-svn: 324839
2018-02-11 14:38:23 +00:00
Craig Topper
36f913ee80 [SelectionDAG] Remove TargetLowering::getConstTrueVal. Use SelectionDAG::getBoolConstant in the one place it was used.
SelectionDAG::getBoolConstant was recently introduced. At the time I didn't know getConstTrueVal existed, but I think getBoolConstant is better as it will use the source VT to make sure it can properly detect floating point if it is configured differently.

llvm-svn: 324832
2018-02-11 04:58:58 +00:00
Craig Topper
9b611e436f [SelectionDAG] Add a helper function for creating a boolean constant based on the target's boolean content
Many in SimplifySetCC and FoldSetCC try to create true or false constants. Some of them query getBooleanContents to figure out whether to use all ones or just 1 for true. But many places do not check and just use 1 without ensuring the VT has an i1 scalar type. Note sure if those places only trigger before type legalization so they only see an i1
type?

To cleanup the inconsistency and reduce some duplicated code, this patch adds a getBoolConstant method to SelectionDAG that takes are of querying getBooleanContents and doing the right thing.

Differential Revision: https://reviews.llvm.org/D43037

llvm-svn: 324634
2018-02-08 18:55:14 +00:00
Sanjay Patel
87ce2fd82d [TargetLowering] use local variable to reduce duplication; NFCI
llvm-svn: 324401
2018-02-06 21:09:42 +00:00
Sanjay Patel
e96a9014ab [TargetLowering] use local variables to reduce duplication; NFCI
llvm-svn: 324397
2018-02-06 20:49:28 +00:00
Jonas Paulsson
422dfbf7cc [SelectionDAG] Consider endianness in scalarizeVectorStore().
When handling vectors with non byte-sized elements, reverse the order of the
elements in the built integer if the target is Big-Endian.

SystemZ tests updated.

Review: Eli Friedman, Ulrich Weigand.
https://reviews.llvm.org/D42786

llvm-svn: 324063
2018-02-02 08:48:02 +00:00
Craig Topper
2c570eaa00 [TargetLowering] Teach TargetLowering::SimplifySetCC to simplify setcc of vXi1 vectors into logic ops.
This transform was already being done for setcc of scalar i1. This extends it to vectors.

llvm-svn: 323585
2018-01-27 09:10:58 +00:00
Jonas Paulsson
7ad28863fb [SelectionDAG] Fix codegen of vector stores with non byte-sized elements.
This was completely broken, but hopefully fixed by this patch.

In cases where it is needed, a vector with non byte-sized elements is stored
by extracting, zero-extending, shift:ing and or:ing the elements into an
integer of the same width as the vector, which is then stored.

Review: Eli Friedman, Ulrich Weigand
https://reviews.llvm.org/D42100#inline-369520
https://bugs.llvm.org/show_bug.cgi?id=35520

llvm-svn: 323042
2018-01-20 16:05:10 +00:00
Sanjay Patel
0e690b05d1 [TargetLowering] add punctuation for readability; NFC
llvm-svn: 322855
2018-01-18 15:25:32 +00:00
Simon Pilgrim
998180dad3 [DAG] Fix for Bug PR34620 - Allow SimplifyDemandedBits to look through bitcasts
Allow SimplifyDemandedBits to use TargetLoweringOpt::computeKnownBits to look through bitcasts. This can help simplifying in some cases where bitcasts of constants generated during or after legalization can't be folded away, and thus didn't get picked up by SimplifyDemandedBits. This fixes PR34620, where a redundant pand created during legalization from lowering and lshr <16xi8> wasn't being simplified due to the presence of a bitcasted build_vector as an operand.

Committed on the behalf of @sameconrad (Sam Conrad)

Differential Revision: https://reviews.llvm.org/D41643

llvm-svn: 321969
2018-01-07 19:09:40 +00:00
Craig Topper
b2368fbdf4 [SelectionDAG] Reverse the order of operands in the ISD::ADD created by TargetLowering::getVectorElementPointer so that the FrameIndex is on the left.
This seems to improve X86's ability to match this into an address computation. Otherwise the other operand gets assigned to the base register and the stack pointer + frame index ends up in the index register. But index registers can't encode ESP/RSP so we end up having to move it into another register to meet the constraint.

I could try to improve the address matcher in X86, but swapping the producer seemed easier. Several other places already have the operands in this order so this is at least consistent.

llvm-svn: 321370
2017-12-22 17:18:13 +00:00
Matthias Braun
f1caa2833f MachineFunction: Return reference from getFunction(); NFC
The Function can never be nullptr so we can return a reference.

llvm-svn: 320884
2017-12-15 22:22:58 +00:00
Yaxun Liu
494770403a CodeGen: Fix pointer info in SplitVecOp_EXTRACT_VECTOR_ELT/SplitVecRes_INSERT_VECTOR_ELT
Two issues found when doing codegen for splitting vector with non-zero alloca addr space:

DAGTypeLegalizer::SplitVecRes_INSERT_VECTOR_ELT/SplitVecOp_EXTRACT_VECTOR_ELT uses dummy pointer info for creating
SDStore. Since one pointer operand contains multiply and add, InferPointerInfo is unable to
infer the correct pointer info, which ends up with a dummy pointer info for the target to lower
store and results in isel failure. The fix is to introduce MachinePointerInfo::getUnknownStack to
represent MachinePointerInfo which is known in alloca address space but without other information.

TargetLowering::getVectorElementPointer uses value type of pointer in addr space 0 for
multiplication of index and then add it to the pointer. However the pointer may be in an addr
space which has different size than addr space 0. The fix is to use the pointer value type for
index multiplication.

Differential Revision: https://reviews.llvm.org/D39758

llvm-svn: 319622
2017-12-02 22:13:22 +00:00
Matt Arsenault
b655fa9ce2 DAG: Add nuw when splitting loads and stores
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.

llvm-svn: 319272
2017-11-29 01:25:12 +00:00
Jonas Paulsson
f0ff20f1f0 Use getStoreSize() in various places instead of 'BitSize >> 3'.
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).

Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.

There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.

Review: Björn Petterson
https://reviews.llvm.org/D40339

llvm-svn: 319173
2017-11-28 14:44:32 +00:00
David Blaikie
b3bde2ea50 Fix a bunch more layering of CodeGen headers that are in Target
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).

llvm-svn: 318490
2017-11-17 01:07:10 +00:00
Matt Arsenault
f6ee94c1c6 DAG: Add computeKnownBitsForFrameIndex
Some of the AMDGPU stack addressing modes require knowing the sign
bit is zero. We used to accomplish this by custom lowering
frame indexes, and then putting an AssertZext around a
TargetFrameIndex. This required specifically looking for
the AssextZext + frame index pattern which was moderately
disgusting. The same could probably be accomplished
with a target specific node, but would still
require special handling of frame indexes.

llvm-svn: 317671
2017-11-08 08:52:31 +00:00
Craig Topper
195dad4264 [SelectionDAG] Don't subject ISD:Constant to the depth limit in TargetLowering::SimplifyDemandedBits.
Summary:
We shouldn't recurse any further but it doesn't mean we shouldn't be able to give the known bits for a constant. The caller would probably like that we always return the right answer for a constant RHS. This matches what InstCombine does in this case.

I don't have a test case because this showed up while trying to revive D31724.

Reviewers: RKSimon, spatel

Reviewed By: RKSimon

Subscribers: arsenm, llvm-commits

Differential Revision: https://reviews.llvm.org/D38967

llvm-svn: 316255
2017-10-21 02:27:19 +00:00
Mark Searles
4e3d6160db Use the return value of UpdateNodeOperands(); in some cases, UpdateNodeOperands() modifies the node in-place and using the return value isn’t strictly necessary. However, it does not necessarily modify the node, but may return a resultant node if it already exists in the DAG. See comments in UpdateNodeOperands(). In that case, the return value must be used to avoid such scenarios as an infinite loop (node is assumed to have been updated, so added back to the worklist, and re-processed; however, node hasn’t changed so it is once again passed to UpdateNodeOperands(), assumed modified, added back to worklist; cycle infinitely repeats).
Differential Revision: https://reviews.llvm.org/D38466

llvm-svn: 315957
2017-10-16 23:38:53 +00:00
Craig Topper
6794eb8ba1 [SelectionDAG] Cleanup the SIGN_EXTEND_INREG handling in computeKnownBits. NFCI
Use less temporary APInts. Use bit counting more. Don't call getScalarSizeInBits so many places, just capture it once.

llvm-svn: 315671
2017-10-13 05:35:35 +00:00
Craig Topper
bde7abe9c9 [SelectionDAG] Fix typo in comment. NFC
llvm-svn: 315670
2017-10-13 05:35:34 +00:00
Craig Topper
0e8211ea57 [SelectionDAG] Const-correct the DemandedMask argument to one of the overloads of SimplifyDemandedBits. NFC
llvm-svn: 315641
2017-10-12 23:46:05 +00:00
Craig Topper
d52cf99f53 [SelectionDAG] Simplify the ISD::SIGN_EXTEND/ZERO_EXTEND handling to use less temporary APInts by counting bits instead. NFCI
llvm-svn: 315628
2017-10-12 21:58:25 +00:00
Yaxun Liu
b33607e5a1 CodeGen: Fix pointer info in expandUnalignedLoad/Store
Currently expandUnalignedLoad/Store uses place holder pointer info for temporary memory operand
in stack, which does not have correct address space. This causes unaligned private double16 load/store to be
lowered to flat_load instead of buffer_load for amdgcn target.

This fixes failures of OpenCL conformance test basic/vload_private/vstore_private on target amdgcn---amdgizcl.

Differential Revision: https://reviews.llvm.org/D35361

llvm-svn: 314566
2017-09-29 23:31:14 +00:00
Craig Topper
5bc10ede53 [SelectionDAG] Teach simplifyDemandedBits to handle shifts by constant splat vectors
This teach simplifyDemandedBits to handle constant splat vector shifts.

This required changing some uses of getZExtValue to getLimitedValue since we can't rely on legalization using getShiftAmountTy for the shift amount.

I believe there may have been a bug in the ((X << C1) >>u ShAmt) handling where we didn't check if the inner shift was too large. I've fixed that here.

I had to add new patterns to ARM because the zext/sext the patterns were trying to look for got turned into an any_extend with this patch. Happy to split that out too, but not sure how to test without this change.

Differential Revision: https://reviews.llvm.org/D37665

llvm-svn: 314139
2017-09-25 19:26:08 +00:00
Craig Topper
f0ba300332 [SelectionDAG] Replace a flag that can never be true with an assert.
llvm-svn: 313847
2017-09-21 00:18:46 +00:00
Craig Topper
eb0f71f232 [SelectionDAG] Use APInt::getActivebits instead of Bitwidth - leading zeros.
llvm-svn: 313839
2017-09-20 23:48:56 +00:00
Craig Topper
288b3c9e69 [SelectionDAG] Use APInt::isSubsetOf. NFC
llvm-svn: 305606
2017-06-16 23:19:14 +00:00
Craig Topper
ea5b8bc9ef [SelectionDAG] Use APInt::isNullValue/isOneValue. NFC
llvm-svn: 305605
2017-06-16 23:19:12 +00:00
Craig Topper
b681907c50 [TargetLowering] Use ConstantSDNode::isOne and getSExtValue instead of getting the underlying APInt first. NFC
llvm-svn: 305604
2017-06-16 23:19:10 +00:00
Simon Pilgrim
be8866f691 [DAG] Move SelectionDAG::isCommutativeBinOp to TargetLowering.
This will allow commutation of target-specific DAG nodes in future patches

Differential Revision: https://reviews.llvm.org/D33882

llvm-svn: 304911
2017-06-07 14:05:04 +00:00
Sanjay Patel
cdb5dad4cc [TargetLowering] fix formatting; NFC
llvm-svn: 304569
2017-06-02 17:35:02 +00:00
Amaury Sechet
437f7060fe nits in TargetLowering.cpp . NFC
llvm-svn: 304532
2017-06-02 09:18:18 +00:00
Craig Topper
7e0aeeb884 [KnownBits] Use !hasConflict() in asserts in place of Zero & One == 0 or similar. NFC
llvm-svn: 303614
2017-05-23 07:18:37 +00:00
Simon Pilgrim
a6ed1b2f12 Use SDValue::getOperand() helper. NFCI.
llvm-svn: 302896
2017-05-12 13:20:24 +00:00
Craig Topper
f0aeee01c3 [KnownBits] Add wrapper methods for setting and clear all bits in the underlying APInts in KnownBits.
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.

Differential Revision: https://reviews.llvm.org/D32637

llvm-svn: 302262
2017-05-05 17:36:09 +00:00
Craig Topper
d938fd1397 [KnownBits] Add zext, sext, and trunc methods to KnownBits
This patch adds zext, sext, and trunc methods to KnownBits and uses them where possible.

Differential Revision: https://reviews.llvm.org/D32784

llvm-svn: 302088
2017-05-03 22:07:25 +00:00
Sanjay Patel
e1cf61c69f [TargetLowering] use isSubsetOf in SimplifyDemandedBits; NFCI
This is the DAG equivalent of https://reviews.llvm.org/D32255 , 
which will hopefully be committed again. The functionality
(preferring a 'not' op) is already here in the DAG, so this is
just intended to be a clean-up and performance improvement.

llvm-svn: 302087
2017-05-03 21:55:34 +00:00
Amara Emerson
d28f0cd448 Generalize the specialized flag-carrying SDNodes by moving flags into SDNode.
This removes BinaryWithFlagsSDNode, and flags are now all passed by value.

Differential Revision: https://reviews.llvm.org/D32527

llvm-svn: 301803
2017-05-01 15:17:51 +00:00
Reid Kleckner
859f8b544a Make getParamAlignment use argument numbers
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.

Avoids confusing code like:
  IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
  Alignment  = CS->getParamAlignment(ArgIdx + 1);

Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.

This is a potentially breaking change for out-of-tree backends that do
their own call lowering.

llvm-svn: 301682
2017-04-28 20:34:27 +00:00
Craig Topper
d0af7e8ab8 [SelectionDAG] Use KnownBits struct in DAG's computeKnownBits and simplifyDemandedBits
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.

This is largely a mechanical transformation from KnownZero to Known.Zero.

Differential Revision: https://reviews.llvm.org/D32569

llvm-svn: 301620
2017-04-28 05:31:46 +00:00
Craig Topper
0e03e74e95 [SelectionDAG] Use various APInt methods to reduce temporary APInt creation
This patch uses various APInt methods to reduce the number of temporary APInts. These were all found while working through converting SelectionDAG's computeKnownBits to also use the KnownBits struct recently added to the ValueTracking version.

llvm-svn: 301618
2017-04-28 04:57:59 +00:00
Craig Topper
24e71017aa [APInt] Use inplace shift methods where possible. NFCI
llvm-svn: 301612
2017-04-28 03:36:24 +00:00
Sanjay Patel
e2ec05a62a [TargetLowering] fix isConstTrueVal to account for build vector truncation
Build vectors have magical truncation powers, so we have things like this:

v4i1 = BUILD_VECTOR Constant:i32<1>, Constant:i32<1>, Constant:i32<1>, Constant:i32<1>
v4i16 = BUILD_VECTOR Constant:i32<1>, Constant:i32<1>, Constant:i32<1>, Constant:i32<1>

If we don't truncate the splat node returned by getConstantSplatNode(), then we won't find 
truth when ZeroOrNegativeOneBooleanContent is the rule.

Differential Revision: https://reviews.llvm.org/D32505

llvm-svn: 301408
2017-04-26 14:05:42 +00:00