Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
This change implements this ticket:
http://llvm.org/bugs/show_bug.cgi?id=20899
Adds the qThreadStopInfo RSP command for llgs and includes a test that
verifies both debugserver and llgs respond with something reasonable
on a multithreaded app.
llvm-svn: 217549
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
Now that llgs supports communicating the 0-port choose-a-port
mechanism and can communicate that back to a caller via the
--named-pipe option (at parity with debugserver), we use this
mechanism to always start llgs and debugserver gdb-remote
protocol tests without needing to use some port arbitration
mechanism. This eliminates some potential intermittent failures vs. the
previous random port and collision-avoidance strategy used.
llvm-svn: 212923
With _HAS_EXCEPTIONS=0, Windows' version of <thread> will fail to
compile because it calls __uncaught_exception(), which is compiled
out due to _HAS_EXCEPTIONS=0. This just creates a stub version
of __uncaught_exception() which always fails.
llvm-svn: 212076
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
GDBProcessCommunicationServer now optionally takes a PlatformSP that
defaults to the default platform for the host.
GDBProcessCommunicationServer::LaunchProcess () now uses the platform
to launch the process.
lldb-gdbserver now takes an optional --platform={platform_plugin_name}
or -p {platform_plugin_name} command line option. If no platform is
specified, the default platform for the host is used; otherwise, if
the platform_plugin_name matches a registered platform plugin or
matches the default platform's name (which is not necessarily
registered by name in the case of 'host'), that platform is used. If
the platform name cannot be resolved, lldb-gdbserver exits after
printing all the available platform plugin names and the default
platform plugin name.
llvm-svn: 200266
This change modifies the 'A' command handler's launch code to launch
with LaunchProcess (). The net effect is that the default process
monitoring that LaunchProcess () adds will kick in, allowing the
GDBRemoteCommunicationServer to be able to reap processes started with
this facility correctly. Later, in the case of lldb-gdbserver, we'll
also have the proper process monitoring going on to really debug the
inferior process.
llvm-svn: 200246
GDBRemoteCommunicationServer::LaunchProcess () now uses the built-up
ProcessLaunchArgs rather than clearing and setting items from the
function arguments. I added setters for the arguments and launch
flags, which lldb-gdbserver uses for its specification of the
commandline-specified startup app (if one is specified).
LaunchProcess () also adds a new reaper monitor that it applies to
the launched process if no process monitor has already been applied.
This addresses an issue where the 'k' command would generate (possibly
false) warnings about not being able to positively state whether a
killed process actually terminated. GDBRemoteCommunicationServer now
definitely knows the disposition of its children.
llvm-svn: 199959
lldb-gdbserver was launching the commandline-specified launch process
directly, without GDBRemoteCommunicationServer knowing anything about
it. As GDBRemoteCommunicationServer is the piece that manages and
knows about processes that the gdb remote protocol discusses with
the client end, it is important that it know about launched processes.
This change also implements the k gdb remote protocol message, having it
kill all known spawned processes when it is received.
(Note: in lldb-gdbserver, the spawned processes are not properly
monitored yet. The response to the k packet will complain that
spawned processes do not really appear to be getting killed even if
they are. This will get addressed soon.)
llvm-svn: 199945
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
<rdar://problem/15600045>
Due to other recent changes, all connections to GDB servers that didn't support the "QStartNoAckMode" packet would cause us to fail to attach to the remote GDB server.
The problem was that SendPacket* and WaitForResponse* packets would return a size_t indicating the number of bytes sent/received. The other issue was WaitForResponse* packets would strip the leading '$' and the trailing "#CC" (checksum) bytes, so the unimplemented response packet of "$#00" would get stripped and the WaitForResponse* packets would return 0.
These new error codes give us flexibility to to more intelligent things in response to what is returned.
llvm-svn: 196610
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
Added _WIN32 guards to new platform features. Using correct SetErrorStringWithFormat within Host when LLDB_DISABLE_POSIX is defined. Also fixed an if defined block.
llvm-svn: 195766
Fixed a bunch of issues with many functions that were added for the platform host IO calls where they might not reply to the packet if the packet was malformed.
Cleaned up error codes.
Added a port offset to allow for connections across a USB mux.
llvm-svn: 195485
--gdbserver-port PORT
--min-gdbserver-port PORT
--max-gdbserver-port PORT
The --gdbserver-port option can be specified multiple times to tell lldb-platform which ports it can use when launching child GDB server processes.
The --min-gdbserver-port and --max-gdbserver-port options allow a range of ports to be specified for use when launching child GDB server processes.
Fixed the code to manage these ports correctly in GDBRemoteCommunicationServer.
Also changed GDBRemoteCommunicationClient to not set a port when sending the "qLaunchGDBServer" packet so that the remote lldb-platform can decide which ports to use. If the lldb-platform was launched with no --gdbserver-port or --min-gdbserver-port/--max-gdbserver-port options, then port 0 is always used and a unix socket is used between the lldb-platform and child GDB server process to coordinate the use of valid port.
llvm-svn: 195300
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
