If you pass an invalid compiler/debugger path on the cmdline to `dotest.py` this is what you get.
Traceback (most recent call last):
[...]
File "dotest.py", line 7, in <module>
lldbsuite.test.run_suite()
[...]
And with the patch applied:
/home/davide/work/build-lldb/bin/clandasfasg is not a valid path, exiting
Differential Revision: https://reviews.llvm.org/D39199
llvm-svn: 316393
Since the ipv6 patch, we've experienced occasional flakyness in
lldb-server tests. This was due to the fact that lldb-server was trying
to listen on both v4 and v6 localhost sockets (and consider it a success
if at least one of them succeeded), while the test framework was only
trying to connect to the v4 one.
This change makes sure lldb-server only listens on the v4 socket.
llvm-svn: 316391
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
Summary:
Test was skipped because -data-evaluate-expression was thought
to not work on globals. This is not the case - the issue was clang
removes debug info for globals in cpp files that are not used.
Add a reference to the globals in question, and fix memory patter in
test to match memory pattern in testcase.
Reviewers: ki.stfu, abidh
Reviewed By: ki.stfu
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D37533
llvm-svn: 312726
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
The Linux xfail decorator was removed in r272326 with the claim that the
test "runs reliably on the linux x86 buildbot." It also runs reliably on
FreeBSD for me.
llvm.org/pr25925
llvm-svn: 310644
This test is consistently reporting unexpected pass for me on FreeBSD
10 and 12. It was failing on the old FreeBSD buildbot which has now been
retired for some time. Will investigate further if this fails once a new
buildbot is configured and running tests.
llvm.org/pr17807
llvm-svn: 310626
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
This reapplies https://reviews.llvm.org/D35740 with a tweak to find
the section by name rather than type. Section types don't distinguish
between regular sections and their DWO counterparts.
llvm-svn: 308905
The DWO handling code can get confused by clang modules which also use
skeleton CUs to point to the object file with the full debug
info. This patch detects whether an object is a "real" DWO or a clang
module and prevents LLDB from interpreting clang modules as DWO. This
fixes the regression in TestWithModuleDebugging.
http://llvm.org/bugs/show_bug.cgi?id=33875
Differential Revision: https://reviews.llvm.org/D35740
llvm-svn: 308850
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Starting with android ndk r15, clang much more tests are affected by the
-mstackrealign bugl (now nearly all functions are affected, and not just
the ones requiring 16-byte alignment). Due to their numbers, Xfailing
all of them is not a viable option, so we will just have to declare this
configuration unsupported, and wait until ndk ships a clang version that
has this bug fixed.
llvm-svn: 307252
to make a target, set a source regex breakpoint, run to
the breakpoint and find the thread that hit the breakpoint.
Start the process of replacing the boiler plate with this
routine.
llvm-svn: 307234
This adds a simple testcase for MainThreadCheckerRuntime. The tool (Main Thread Checker) is only available on Darwin, so the test also detects the presence of libMainThreadChecker.dylib and is skipped if the tool is not available.
llvm-svn: 307170
All android builds systems have switched to -mstackrealign for building
x86 binaries, so follow their cue with our mini build system.
This presently breaks just one test (TestReturnValue), and this is due
to a compiler bug, which has already been fixed in clang, but it hasn't
made it yet into the official NDK compiler. While I'm touching that
test, I also remove an android-specific XFAIL, which is not relevant
anymore.
llvm-svn: 306683
components to not depend on "." characters in the fileanme
(e.g. "Foundation.framework") but instead to just use path
separators. The names of the files themselves may have dots
in them ("com.apple.sbd") which would break the old scheme.
Also add a test case for this (macosx/find-dsym/bundle-with-dot-in-filename)
as well as a test case for r304520 (macosx/find-dsym/deep-bundle)
which needed a similar setup to test correctly on a single machine.
(both of these are really testing remote debug session situations
where the binary can't be found on the system where lldb is running,
complicating the test case a bit.)
<rdar://problem/31825940>
llvm-svn: 305441
NSString is loaded from the DWARF, which doesn't have the concept of protocols.
When this is used with the NSMutableDictionary type from Objective-C modules,
this produces errors of the form
error: cannot initialize a parameter of type 'id<NSCopying> _Nonnull' with an rvalue of type 'NSString *'
We're aware of these problems and have an internal bug report filed
(<rdar://problem/32777981>)
llvm-svn: 305424
The step count depends on code generated by compiler (GCC/Clang).
It will also vary for different MIPS arch variant. Hence skipping these test for MIPS.
Subscribers: jaydeep, bhushan, lldb-commits, slthakur
llvm-svn: 305383
Clang does not accept regparm attribute on these platforms.
Fortunately, the default calling convention passes arguments
in registers any way
Subscribers: jaydeep, bhushan, lldb-commits, slthakur
llvm-svn: 305378
This test started being flaky since r303848 (RunThreadPlan: Fix halting
logic in IgnoreBreakpoints = false). I am not reverting that, as I am
confident that actually fixed a problem. A more likely explanation is
that there is still one corner case that is not handled correctly there.
Marking the test as flaky until I get a chance to investigate. I also
mark the test as no-debug-info-dependend -- it stresses expression
evaluation, as far as debug info goes, the test if extremely simple.
llvm-svn: 305286
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
I was over-eager to unable this test in r304976. It still fails in this
combination, at there does not seem to be anything we can do about it,
as the generated code does not preserve the link register.
llvm-svn: 305062
Summary:
When a call instruction is the last instruction in a function, the
backtrace PC will point past the end of the function. We already had
special code to handle that, but we did not handle the case where the PC
ends up outside of the bounds of the module containing the function,
which is a situation that occured in TestNoreturnUnwind on android for
some arch/compiler combinations.
I fix this by adding an argument to Address resolution code which states
that we are ok with addresses pointing to the end of a module/section to
resolve to that module/section.
I create a reproducible test case for this situation by hand-crafting an
executable which has a noreturn function at the end of a module.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32022
llvm-svn: 304976
When parsing types originating in modules, it is possible to encounter AttributedTypes
(such as the type generated for NSString *_Nonnull). Some of LLDB's ClangASTContext
methods deal with them; others do not. In particular, one function that did not was
GetTypeInfo, causing TestObjCNewSyntax to fail.
This fixes that, treating AttributedType as essentially transparent and getting the
information for the modified type.
In addition, however, TestObjCNewSyntax is a monolithic test that verifies a bunch of
different things, all of which can break independently of one another. I broke it
apart into smaller tests so that we get more precise failures when something (like
this) breaks.
Differential Revision: https://reviews.llvm.org/D33812
llvm-svn: 304510
This works on SVN but is a bit fragile on the Swift branch.
I'm adding the test to both, so we have this path covered.
<rdar://problem/32372372>
llvm-svn: 304314
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
This is a resubmit of r303732, which was reverted due to a regression.
The original patch caused a regression in TestLoadUnload, which has only showed
up when running the remote test suite. The problem there was that we interrupted
the target just as it has hit the rendezvous breakpoint in the dlopen call. This
meant that the stop reason was set to "breakpoint" even though the event would
not have been broadcast if we had not stopped the process. I fix this by
checking StopInfo->ShouldNotify() before stopping.
I also add a new test for the handling of conditional breakpoints in
expressions, which I noticed to be broken (pr33164)
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303848
Summary:
The function had logic to handle the case when the expression terminated
while we were trying to halt the process, but it failed to take into
account the possibility that the expression stopped because it hit a
breakpoint. This was caused by the fact that the handling of the stopped
events was duplicated for the "halting" and regular cases (the regular
case handled this situation correctly). I've tried to merge these two
cases into one to make sure they stay in sync.
I should call out that the two cases were checking whether the thread
plan has completed in slightly different ways. I am not sure what is the
difference between them, but I think the check should be the same in
both cases, whatever it is, so I just took the one from the regular
case, as that is probably more tested.
For the test, I modified TestUnwindExpression to run the expression with
a smaller timeout (this is how I found this bug originally). With a 1ms
one thread timeout, the test failed consistently without this patch.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303732
For remote targets we need to call registerSharedLibrariesWithTarget to
make sure they are installed alongside main executable. This also
required a small fixup in the the mentioned function as in this case
"One" was both a directory name and a library name template. I fixed it
to make sure it checks that the string refers to a file before it
assumed it was a full library path.
llvm-svn: 303248
When it resolves symbol-only variables, the expression parser
currently looks only in the global module list. It should prefer
the current module.
I've fixed that behavior by making it search the current module
first, and only search globally if it finds nothing. I've also
added a test case.
After review, I moved the core of the lookup algorithm into
SymbolContext for use by other code that needs it.
Thanks to Greg Clayton and Pavel Labath for their help.
Differential Revision: https://reviews.llvm.org/D33083
llvm-svn: 303223
ptr_refs exposed a problem in ClangASTContext's implementation: it
uses an accessor to downcast a QualType to an
ObjCObjectPointerType, but the accessor is not fully general.
getAs() is the safer way to go.
I've added a test case that uses ptr_refs in a way that would
crash before the fix.
<rdar://problem/31363513>
llvm-svn: 303110
as described in pr33042, we cannot reliably retrieve the return value on
arm64 in cases it is returned via x8 pointer. I tried to do this as
surgically as possible and disabled it only on targets I know to be
affected, as the code is still useful, even though it can only work on
best-effort basis.
llvm-svn: 303076
Templates can end in parameter packs, like this
template <class T...> struct MyStruct
{ /*...*/ };
LLDB does not currently support these parameter packs;
it does not emit them into the template argument list
at all. This causes problems when you specialize, e.g.:
template <> struct MyStruct<int>
{ /*...*/ };
template <> struct MyStruct<int, int> : MyStruct<int>
{ /*...*/ };
LLDB generates two template specializations, each with
no template arguments, and then when they are imported
by the ASTImporter into a parser's AST context we get a
single specialization that inherits from itself,
causing Clang's record layout mechanism to smash its
stack.
This patch fixes the problem for classes and adds
tests. The tests for functions fail because Clang's
ASTImporter can't import them at the moment, so I've
xfailed that test.
Differential Revision: https://reviews.llvm.org/D33025
llvm-svn: 302833
Summary:
'arch' is a valid qHostInfo key, but the unit
test for qHostInfo did not include it in the set of possible keys.
Reviewers: tfiala, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32711
llvm-svn: 302260
Summary:
I have found a way to segfault lldb in 7 keystrokes! Steps to reproduce:
1) Launch lldb
2) Type `print` and hit enter. lldb will now prompt you to type a list of
expressions, followed by an empty line.
3) Hit enter, indicating the end of your input.
4) Segfault!
After some investigation, I've found the issue in Host/common/Editline.cpp.
Editline::MoveCursor() relies on m_input_lines not being empty when the `to`
argument is CursorPosition::BlockEnd. This scenario, as far as I can tell,
occurs in one specific instance: In Editline::EndOrAddLineCommand() when the
list of lines being processed contains exactly one string (""). Meeting this
condition is fairly simple, I have posted steps to reproduce above.
Reviewers: krytarowski, zturner, labath
Reviewed By: labath
Subscribers: scott.smith, lldb-commits
Differential Revision: https://reviews.llvm.org/D32421
Patch by Alex Langford.
llvm-svn: 302225
Summary:
Arm64 Procedure Call Standard specifies than only vectors up to 16 bytes
are stored in v0 (which makes sense, as that's the size of the
register). 32-byte vector types are passed as regular structs via x8
pointer. Treat them as such.
This fixes TestReturnValue for arm64-clang. I also split the test case
into two so I can avoid the if(gcc) line, and annotate each test
instead. (It seems the vector type tests fail with gcc only when
targetting x86 arches).
Reviewers: tberghammer, eugene
Subscribers: aemerson, omjavaid, rengolin, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32813
llvm-svn: 302220
Summary:
The existing cpp-level checks using PR_MPX_ENABLE_MANAGEMENT aren't sufficient,
as this isn't defined for linux kernel versions below 3.19.
Reviewers: valentinagiusti, zturner, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32719
llvm-svn: 302027
gnuwin32 rm does not like wildcards that match nothing even if we
specify -f (probably because the wildcard expansion happens in-process
there). We could use make $(wildcard) here, but it seems safer to
explicitly list the files here, just like the normal Makefile.rules
does.
llvm-svn: 302013
Loading a shared library can require a large amount of work; rather than do that serially for each library,
this patch will allow parallelization of the symbols and debug info name indexes.
From scott.smith@purestorage.comhttps://reviews.llvm.org/D32598
llvm-svn: 301609
Many times a user wants to access a type when there's a variable of
the same name, or a variable when there's a type of the same name.
Depending on the precise context, currently the expression parser
can fail to resolve one or the other.
This is because ClangExpressionDeclMap has logic to limit the
amount of information it searches, and that logic sometimes cuts
down the search prematurely. This patch removes some of those early
exits.
In that sense, this patch trades performance (early exit is faster)
for correctness.
I've also included two new test cases showing examples of this
behavior – as well as modifying an existing test case that gets it
wrong.
llvm-svn: 301273
LLDB uses clang::DeclContexts for lookups, and variables get put into
the DeclContext for their abstract origin. (The abstract origin is a
DWARF pointer that indicates the unique definition of inlined code.)
When the expression parser is looking for variables, it locates the
DeclContext for the current context. This needs to be done carefully,
though, e.g.:
__attribute__ ((always_inline)) void f(int a) {
{
int b = a * 2;
}
}
void g() {
f(3);
}
Here, if we're stopped in the inlined copy of f, we have to find the
DeclContext corresponding to the definition of f – its abstract
origin. Clang doesn't allow multiple functions with the same name and
arguments to exist. It also means that any variables we see must be
placed in the appropriate DeclContext.
[Bug 1]: When stopped in an inline block, the function
GetDeclContextDIEContainingDIE for that block doesn't properly
construct a DeclContext for the abstract origin for inlined
subroutines. That means we get duplicated function DeclContexts, but
function arguments only get put in the abstract origin's DeclContext,
and as a result when we try to look for them in nested contexts they
aren't found.
[Bug 2]: When stopped in an inline block, the DWARF (for space
reasons) doesn't explicitly point to the abstract origin for that
block. This means that the function GetClangDeclContextForDIE returns
a different DeclContext for each place the block is inlined. However,
any variables defined in the block have abstract origins, so they
will only get placed in the DeclContext for their abstract origin.
In this fix, I've introduced a test covering both of these issues,
and fixed them.
Bug 1 could be resolved simply by making sure we look up the abstract
origin for inlined functions when looking up their DeclContexts on
behalf of nested blocks.
For Bug 2, I've implemented an algorithm that makes the DeclContext
for a block be the containing DeclContext for the closest entity we
would find during lookup that has an abstract origin pointer. That
means that in the following situation:
{ // block 1
int a;
{ // block 2
int b;
}
}
if we looked up the DeclContext for block 2, we'd find the block
containing the abstract origin of b, and lookup would proceed
correctly because we'd see b and a. However, in the situation
{ // block 1
int a;
{ // block 2
}
}
since there isn't anything to look up in block 2, we can't determine
its abstract origin (and there is no such pointer in the DWARF for
blocks). However, we can walk up the parent chain and find a, and its
abstract origin lives in the abstract origin of block 1. So we simply
say that the DeclContext for block 2 is the same as the DeclContext
for block 1, which contains a. Lookups will return the same results.
Thanks to Jim Ingham for review and suggestions.
Differential revision: https://reviews.llvm.org/D32375
llvm-svn: 301263
Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
The test fails because an older clang did not emit the required debug
info (I am not sure when this got added, but clang-3.7 certainly did not
work yet). The actual platform has nothing to do with this.
llvm-svn: 300834
I thought my previous commit got the last ones but somehow I missed
these. This also resurrects TestDataFormatterLibcxxSet, which got
commented out in r263859 as a part of some seemingly unrelated change.
llvm-svn: 300833
Clang rejects __attribute__((regparm)) when targetting arm. The default
calling convention passes arguments in registers anyway, so we can just
remove them in this case.
llvm-svn: 300670
r285226 dropped the code that did these checks. I am pretty
sure that was inadvertent, so I added that back in and added
a test for it.
<rdar://problem/31661252>
llvm-svn: 300564
Summary:
The iteration list through the available data formatters was undefined,
which meant that the vector<bool> formatter kicked in only in cases
where it happened to be queried before the general vector formatter. To
fix this, I merge the two data formatter entries into one, and select
which implementation to use in the factory function.
Reviewers: jasonmolenda, tberghammer, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31880
llvm-svn: 300047
gcc emits DW_LANG_C89 even if we specify -std=c99 during compilation.
Since this isn't an lldb bug, but just the way the compiler happens to
be implemented, I teach the test to expect this situation correctly.
llvm-svn: 300046
I have put them all in their own category, and made that category disabled by default.
Differential revision: https://reviews.llvm.org/D31718
llvm-svn: 299587
look showed that the target's arch has no core / byte order and so when
AuxVector::AuxVector calls into a dataextractor and sets the byte size to 0,
it asserts. e.g.
m_arch = {
m_triple = (Data = "x86_64--linux", Arch = x86_64, SubArch = NoSubArch, Vendor = UnknownVendor, OS = Linux, Environment = UnknownEnvironment, ObjectFormat = ELF)
m_core = kCore_invalid
m_byte_order = eByteOrderInvalid
m_flags = 0x00000000
m_distribution_id = <no value available>
}
<rdar://problem/31380097>
llvm-svn: 299408
Summary:
After this change a sythetic child provider can generate a special child
named "$$dereference$$" what if present is used when "operator*" or
"operator->" used on a ValueObject. The goal of the change is to make
expressions like "up->foo" work inside the "frame variable" command.
Reviewers: labath, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31368
llvm-svn: 299251
Summary:
Displaying the object pointed by the unique_ptr can cause an infinite
recursion when we have a pointer loop so this change stops that
behavior. Additionally it makes the unique_ptr act more like a class
containing a pointer (what is the underlying truth) instead of some
"magic" class.
Reviewers: labath, jingham
Differential Revision: https://reviews.llvm.org/D31366
llvm-svn: 299249
Summary:
This aims to replace the different decorators we've had on each libc++
test with a single solution. Each libc++ will be assigned to the
"libc++" category and a single central piece of code will decide whether
we are actually able to run libc++ test in the given configuration by
enabling or disabling the category (while giving the user the
opportunity to override this).
I started this effort because I wanted to get libc++ tests running on
android, and none of the existing decorators worked for this use case:
- skipIfGcc - incorrect, we can build libc++ executables on android
with gcc (in fact, after this, we can now do it on linux as well)
- lldbutil.skip_if_library_missing - this checks whether libc++.so is
loaded in the proces, which fails in case of a statically linked
libc++ (this makes copying executables to the remote target easier to
manage).
To make this work I needed to split out the pseudo_barrier code from the
force-included file, as libc++'s atomic does not play well with gcc on
linux, and this made every test fail, even though we need the code only
in the threading tests.
So far, I am only annotating one of the tests with this category. If
this does not break anything, I'll proceed to update the rest.
Reviewers: jingham, zturner, EricWF
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30984
llvm-svn: 299028
This was added to workaround a limitation in LLVM's implementation
of getting the current user's home directory, since it would
only look at the value of $HOME, but we did not want to rely
on that being set so we would also look in the password database.
Adding the ability to look in the password database to LLVM was
a straightforward patch that was submitted in r298513, so since
that is done this test is no longer needed.
llvm-svn: 298519
This fixes a bug introduced by r291559. The Module's FindType was
passing the original name not the basename in the case where it didn't
find any separators. I also added a testcase for this.
<rdar://problem/31159173>
llvm-svn: 298331
Only do this when we are debugging an executable, since we
don't have a good way to trace from an ObjectFile back to its
containing executable. Detecting pre-run libs before running
is "best effort" in lldb, but this one is pretty easy.
llvm-svn: 298290
r298203 make SBPlatform::MakeDirectory less recursive, which breaks the
test suite creation of test directory hierarchy creation on the remote
target. Since the function was never fully recursive, and the name does
not imply recursiveness, I fix the problem by modifying the test runner
to do the recursion manually.
I also make the runner complain more loudly when it fails to create the
directory -- previously it just printed the error to stdout and caused
most of the tests to hang, which is not very helpful in diagnosing the
problem.
llvm-svn: 298261
dotest.py script doesn't validate executables passed on the command line
before spawning dozens of subprocesses, all of which fail silently,
leaving an empty results file.
We should validate the lldb and compiler executables on
configuration, aborting when given invalid paths, to prevent numerous,
cryptic, and spurious failures.
<rdar://problem/31117272>
llvm-svn: 298111
Summary:
These classes existed only because of the GetName() static function,
which can be moved to a more natural place anyway. I move the linux
version to NativeProcessLinux (and get rid of ProcFileReader), the
freebsd version to ProcessFreeBSD (and fix a bug where it was using the
current process ID, instead of the inferior pid), and remove the NetBSD
version (which was probably incorrect anyway, as it assumes the current
process instead of the inferior.
I also add an llgs test to that verifies thread names are read
correctly.
Reviewers: zturner, krytarowski, emaste
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30981
llvm-svn: 298058
It seems that on darwin we are not able to resolve breakpoints in the
test shared library until the process has started. That seems
unfortunate, but it is not the purpose of this test, so work around that
by starting the process before doing the rest of our checks.
llvm-svn: 297830
Summary:
This fixes the case where a user tries to set a breakpoint on a source
line outside of any function (e.g. because that code is #ifdefed out, or
the compiler did not emit code for the function, etc.) and we would
silently move the breakpoint to the next function.
Now we check whether the line range of the resolved symbol context
function matches the original line number. We reject any breakpoint
locations that appear to move the breakpoint into a new function. This
filtering only happens if we have full debug info available (e.g. in
case of -gline-tables-only compilation, we still set the breakpoint on
the nearest source line).
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30817
llvm-svn: 297817
Summary:
This has been broken at least since the new test result framework was
added, which was over a year ago. It looks like nobody has missed it
since.
Removing this makes the gmodules handling code saner, as it already did
not know how to handle the multiple-compilers case.
My motivation for this is libc++ data formatters support on android -- I
am trying make a central way of determining whether libc++ tests can be
run, and without this, I would have to resort to similar hacks as the
gmodules code.
Reviewers: jingham, zturner
Subscribers: danalbert, tfiala, lldb-commits
Differential Revision: https://reviews.llvm.org/D30779
llvm-svn: 297811
This patch adds support to the test suite for overriding the path to debugserver, and uses the override to point to the build tree's debugserver on Darwin.
llvm-svn: 297776
Summary:
This adds support for building libc++ tests when targetting android. The
tests are still not passing due to several other problems, but this way
we can at least build them.
Reviewers: eugene, EricWF, danalbert
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30737
llvm-svn: 297616
SectionLoadList exposed by this test. Greg tried to chase it down
& got pretty far but the isn't correct so we'll disable this test
for now until I can figure that out.
<rdar://problem/30899227>
llvm-svn: 297440
The toolchain directory for arm android targets was computed
incorrectly. The architecture part should be arm, and the environment
part androideabi. This fixes that.
llvm-svn: 297279
it fails, but it works on the local workstations. I'll
need to figure out what the difference is between these.
<rdar://problem/30915340>
llvm-svn: 297259
Currently on remote platforms the lldb-mi tests fail, which means they time out.
Given how many of the lldb-mi tests there are, this means a long wait.
llvm-svn: 296951
Prior to MSVC 2015 we had to manually include this header any
time we were going to include <thread> or <future> due to a
bug in MSVC's STL implementation. This has been fixed in MSVC
for some time now, and we require VS 2015 minimum, so we can
remove this across all subprojects.
llvm-svn: 296906
$(realpath), which I guess is a make builtin, gives strange results on
Windows. $(shell realpath) invokes the gnuwin external binary, which
works correctly.
llvm-svn: 296876
Make sure we don't generate extremely long file names for test trace log
file, as this can cause path-too-long errors. As the compilers in the
android ndk are deeply nested, it's very easy to trigger these.
I chose to output at most 4 path components -- this should keep the full
path for common cases like /usr/bin/gcc with room to spare, and should
be enough to uniquely identify the compiler for more deeply nested
cases.
llvm-svn: 296870
Summary:
This teaches the test makefiles about the Android NDK, so we are able to
run the tests without first going through the make_standalone_toolchain
script. The motivation for this is the ability to run both libc++ and
libstdc++ tests together, which previously was not possible because
make_standalone_toolchain bakes in the STL to use during toolchain
creation time. The support for this is not present yet -- this change
only make sure we don't regress for existing funcionality (gcc w/
libstdc++). Clang and libc++ support will be added later.
I've checked that the mips android targets compile after this change,
but I have no way of checking whether this breaks anything. If you are
reading this and it broke you, let me know.
Reviewers: tberghammer, danalbert
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30410
llvm-svn: 296869
this test was using the VPATH hack to avoid having a copy of the
inferior source code. This makes the test fail if in happens to run
concurrently with a test in the parent folder. Fix that by moving it up
to the parent.
llvm-svn: 296741
Summary:
Native Thread ID is retrieved with _lwp_self() on NetBSD.
The returned value is of type int32_t, but for consistency with other Operating Systems cast it to uint64_t.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, labath, clayborg, emaste
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30374
llvm-svn: 296360
Summary:
There is nothing we can do with the breakpoint once the associated
target becomes deleted. This will make sure we don't hold on to more
resources than we need in this case. In particular, this fixes the case
TestStepOverBreakpoint on windows, where a lingering SBBreakpoint object
causes us to nor unmap the executable file from memory.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30249
llvm-svn: 296328
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
acquired only after checking if the ivar shared pointer was already
filled in. But when I assign an UnwindPlan object to the shared
pointer, I assign an empty object and then fill it in. That leaves
a window where another thread could get the shared pointer to the
empty (but quickly being-filled-in) object and lead to a crash.
Also two changes from Greg for correctness on the TestMultipleDebuggers
test case.
<rdar://problem/30564102>
llvm-svn: 296084
Summary:
This also removes magic rename code, which caused the channel to be
called "linux" when built on a linux machine, and "freebsd" when built
on a freebsd one, which seems unnecessary - registering a new channel is
sufficiently simple now that if we wish to log something extremely
os-specific, we can just create a new channel. None of the current
categories seem very specific to one OS or another.
Reviewers: emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30250
llvm-svn: 295954
In the case we are stepping over the thread creation instruction, we
will end up calling Thread::SingleStep back-to-back twice (because of
the intermediate PTRACE_EVENT_CLONE stop). This will cause the cpu mask
to be set inappropriately (because the old SingleStepCheck object will
be destroyed after we create the new one), and the single-step will
fail.
Before the refactor the code was still incorrect in this case, but in a
different way (the thread was left with the incorrect mask after the
stepping was complete), so this was not easy to spot.
This fixes TestCreateDuringInstructionStep on the affected devices.
llvm-svn: 295440
Summary:
GCC emits also symbols for the __PRETTY_FUNCTION__ virtual variable,
which we accidentaly pick up when looking for functions for with
"unique_function_name" in the name. This makes the target.FindFunctions
call fail, as that symbol is not a function.
I also strenghten the test a bit to make sure we actually find all the
functions we are interested in. I've put a check that we find at least 6
functions, but maybe this should be *exactly* 6 ?
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29932
llvm-svn: 295170
This test is flaky on the windows->android bot. Change assertTrue to
assertEqual in the hope better error messages will direct us to the
problem.
llvm-svn: 294737
Summary:
The server was no longer sending the thread PCs the way the client
expected them.
I changed the server to send them back as a threadstop info field,
similar to the Apple version of the server.
I also changed the client to look for them there, before querying the
server.
I added a test to ensure the server doesn't stop sending them.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D28880
Author: Jason Majors
llvm-svn: 292611
We are going to turn off buffer overflow introduced by gcc by turning off
FORTIFY_SOURCE.
Differential revision: https://reviews.llvm.org/D28666
llvm-svn: 291949
Summary:
Some of the mi commands implemented in lldb-mi are incomplete/not confirming to the spec.
- `gdb-show` and `gdb-set` doesn't support getting/setting `disassembly-flavor`
- `environment-cd` should also change the working directory for inferior
- debugger CLI output should be printed as console-stream-output record, rather than being dumped directly
to stdout
- `target-select` should provide inner error message in mi response
Related bug report:
- https://llvm.org/bugs/show_bug.cgi?id=28026
- https://llvm.org/bugs/show_bug.cgi?id=28718
- https://llvm.org/bugs/show_bug.cgi?id=30265
Reviewers: ki.stfu, abidh
Subscribers: abidh, ki.stfu, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D24711
llvm-svn: 291104
r290874 enabled the s390x test, which caused the rest of the tests to start
misbehaving. This is because this test switches the selected platform and the
change persists.
This fixes it by explicitly resetting the platform in a similar way to the gcore
tests do. Potentially we should consider re-setting the platform globally
between each test run to better protect tests from each other.
llvm-svn: 290890
Summary:
This patch changes and simplifies the way notes are read from Linux Elf cores.
The current implementation copies the bytes from the notes directly over the lldb structure for 64 bit cores and reads field by field for 32 bit cores. Reading the bytes directly only works if the endianess of the core dump and the platform that lldb are running on matches. The case statements for s390x and x86_64 would would only work on big endian systems and little endian systems respectively. That meant that x86_64 generally worked but s390x didn't unless you were on s390x or another big endian platform.
This patch just reads field by field on all platform and updates the field by field version to allow for those fields which are word size instead of fixed size. It should also slightly simplify adding support for a new Linux platform.
This patch also re-enables the s390x test case in TestLinuxCore.py on all non-s390x platforms as it now passes.
Reviewers: uweigand, clayborg
Differential Revision: https://reviews.llvm.org/D27571
llvm-svn: 290874
We're seeing some very occasional failures in these tests where the
mini-driver dies with a SIGPIPE. We don't use SIGPIPE for anything, and
the main lldb driver program already ignores SIGPIPE, so ignoring it in
the mini-driver is a good way to remove these spurious failures.
<rdar://problem/29740488>
llvm-svn: 290216
Fixed by additional completed plans detection, and applying them on breakpoint condition fail.
Thread::GetStopInfo reworked. New test added.
Review https://reviews.llvm.org/D26497
Many thanks to Jim
llvm-svn: 290168
We don't parse ObjC v1 types from the runtime metadata like we do for ObjC v2, but doing so by creating empty types was ruining the i386 v1 debugging experience.
<rdar://problem/24093343>
llvm-svn: 289233
This test links against liblldb, so it can only run when the target arch is the
same arch as liblldb. We already have a decorator for that, so apply it.
While I'm in there, also mark the test as debug-info independent.
llvm-svn: 289199
I found the race condition in:
ScriptInterpreter *CommandInterpreter::GetScriptInterpreter(bool can_create);
More than one "ScriptInterpreter *" was being returned due to the race which caused any clients with the first one to now be pointing to freed memory and we would quickly crash.
Added a test to catch this so we don't regress.
<rdar://problem/28356584>
llvm-svn: 289169
to not be set by Process::WillPublicStop() so the driver won't get
access to them. The fix is straightforward, moving the call to
WillPublicStop above the early return for the interrupt case. (the
interrupt case does an early return because the rest of the function
is concerned with running stop hooks etc and those are not applicable
when we've interrupted the process).
Also added a test case for it. The test case is a little complicated
because I needed to drive lldb asynchronously to give the program
a chance to get up and running before I interrupt it. Running to
a breakpoint was not sufficient to catch this bug.
<rdar://problem/22693778>
llvm-svn: 289026
We have a longstanding issue where the expression parser does not handle wide CFStrings (e.g., @"凸凹") correctly, producing the useless error message
Internal error [IRForTarget]: An Objective-C constant string's string initializer is not an array
error: warning: expression result unused
error: The expression could not be prepared to run in the target
This is just a side effect of the fact that we don't handle wide string constants when converting these to CFStringCreateWithBytes. That function takes the string's encoding as an argument, so I made it work and added a testcase.
https://reviews.llvm.org/D27291
<rdar://problem/13190557>
llvm-svn: 288386
The current implementation of the decorator does not skip if the android target
arch is the same as host arch (as in both cases the platform comes out as linux).
Nonetheless android x86_64 binaries are not compatible with linux ones.
Technically this should be "skip if target is android and host is *not* android",
but currently nobody runs lldb test suite on an android host, so we don't even
have a way of specifying that the host is android.
llvm-svn: 288027
The line numbers come out slightly differently when the test is run with gcc-4.9
as a compiler. The test probably should not depend on that, but that is a
different story.
llvm-svn: 287893
This test passes consistently on linux, so I am removing the overall XFAIL. If it
fails on your configuration, please put a targeted xfail instead (i'll add them
my self if I get any breakage emails).
llvm-svn: 287881
Summary:
This patch changes the way ProcessElfCore.cpp handles signal information.
The patch changes ProcessElfCore.cpp to use the signal from si_signo in SIGINFO notes in preference to the value of cursig in PRSTATUS notes. The value from SIGINFO seems to be more thread specific. The value from PRSTATUS is usually the same for all threads even if only one thread received a signal.
If it cannot find any SIGINFO blocks it reverts to the old behaviour and uses the value from cursig in PRSTATUS. If after that no thread appears to have been stopped it forces the status of the first thread to be SIGSTOP to prevent lldb hanging waiting for any thread from the core file to change state.
The order is:
- If one or more threads have a non-zero si_signo in SIGINFO that will be used.
- If no threads had a SIGINFO block with a non-zero si_signo set all threads signals to the value in cursig in their PRSTATUS notes.
- If no thread has a signal set to a non-zero value set the signal for only the first thread to SIGSTOP.
This resolves two issues. The first was identified in bug 26322, the second became apparent while investigating this problem and looking at the signal values reported for each thread via “thread list”.
Firstly lldb is able to load core dumps generated by gcore where each thread has a SIGINFO note containing a signal number but cursig in the PRSTATUS block for each thread is 0.
Secondly if a SIGINFO note was found the “thread list” command will no longer show the same signal number for all threads. At the moment if a process crashes, for example with SIGILL, all threads will show “stop reason = signal SIGILL”. With this patch only the thread that executed the illegal instruction shows that stop reason. The other threads show “stop reason = signal 0”.
Reviewers: jingham, clayborg
Subscribers: sas, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D26676
llvm-svn: 287858
Summary:
The floating-point and SSE registers could be present in the elf-core
file in the note NT_FPREGSET for 64 bit ones, and in the note
NT_PRXFPREG for 32 bit ones.
The entire note is a binary blob matching the layout of the x87 save
area that gets generated by the FXSAVE instruction (see Intel developers
manual for more information).
This CL mainly modifies the RegisterRead function in
RegisterContextPOSIXCore_x86_64 for it to return the correct data both
for GPR and FPR/SSE registers, and return false (meaning "this register
is not available") for other registers.
I added a test to TestElfCore.py that tests reading FPR/SSE registers
both from a 32 and 64 bit elf-core file and I have inluded the source
which I used to generate the core files.
I tried to also add support for the AVX registers, because this info could
also be present in the elf-core file (note NT_X86_XSTATE - that is the result of
the newer XSAVE instruction). Parsing the contents from the file is
easy. The problem is that the ymm registers are split into two halves
and they are in different places in the note. For making this work one
would either make a "hacky" approach, because there won't be
any other way with the current state of the register contexts - they
assume that "this register is of size N and at offset M" and
don't have the notion of discontinuos registers.
Reviewers: labath
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D26300
llvm-svn: 287506
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
On Windows, where we use Python 3 for testing, we have to be more explicit about converting between binary and string representations. I believe this should still work for Python 2, but I don't have a convenient way to try it out.
Differential Revision: https://reviews.llvm.org/D26643
llvm-svn: 286909
With this patch LLDB_VERSION_STRING replaces "lldb version x.x.x" if it is set. This allows builds to not display the open source version numbers if the people making the distribution overrides the LLDB_VERSION_STRING.
Since LLDB_VERSION_STRING is always overridden on Darwin, this means the first line of lldb -version on Darwin is:
lldb-360.99.0 (<repo path> revision <revision>)
llvm-svn: 286899
Fails with all versions of arm/aarch64 gcc available on ubuntu 16.04/14.04.
Passes with Linaro GCC version >= 4.8 but fails with >= 5.0. But There are other regressions when we use Linaro GCC.
llvm-svn: 286574
Summary: This patch reworks all the @skip... lines for sanitizer libraries to be based on whether or not the compiler actually works, rather than whether or not the compiler-rt sources are present in some magically derived directory.
Reviewers: lldb-commits
Subscribers: kubabrecka, tfiala
Differential Revision: https://reviews.llvm.org/D26513
llvm-svn: 286490
The debug info emitted by clang for static variables improved by
rL286302 and it exposed an incorrect test expactation because now LLDB
able to displays more data 9thanks to better debug info) then before.
llvm-svn: 286360
Summary:
r284830 added a summary provider for unique_ptr in libstdc++, whose value printed
the value of the pointee. This is a bit unintuitive as it becomes unobvious that
the value actually is a pointer, and we lose the way to actually obtain the
pointer value.
Change that to print the pointer value instead. The pointee value can still be
obtained through the synthetic children.
Reviewers: tberghammer, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26403
llvm-svn: 286355
Summary:
This commit disables the windows-only minidump plugin and enables the new
cross-platform plugin for windows minidump files. Test decorators are adjusted to
reflect that: windows minidump tests can now run on all platforms. The exception
is the tests that create minidump files, as that functionality is not available
yet. I've checked that this works on windows and linux.
Reviewers: amccarth, zturner
Subscribers: dvlahovski, lldb-commits
Differential Revision: https://reviews.llvm.org/D26393
llvm-svn: 286352
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This renames the functionalities/postmortem/linux-core to elf-core and puts the
"linux" part into the individual names of the core files. Since the tests for
linux and freebsd core files are going to be very similar, having them close
together means they can reuse most of the plumbing.
llvm-svn: 286101
Summary:
This patch contains test for reading YMM Registers. The test basically
contains an inferior that loads the ymm registers with a bit pattern
and the python test executes register read to check if the bit pattern
is correctly written in the registers. This test is repeated twice for
each register with a different pattern for better sanity.
Reviewers: tberghammer, zturner, clayborg
Subscribers: tberghammer, danalbert, srhines
Differential Revision: https://reviews.llvm.org/D26242
llvm-svn: 285885
We really shouldn't be sending events for SB API's, dunno when we started
doing that. We don't do it for other things. But first restore the status quo.
llvm-svn: 285781
We don't have a good story for what happens to watchpoints when you don't
have a process, or if your process exits. Clearing that up will instruct
how to fix this for real.
Also added a test to make sure disable->enable works as well.
This resolves llvm.org/pr30789.
llvm-svn: 285742
