The results port was used by dosep.py to deal with test results coming
form different processes. With dosep.py gone, I don't think we need this
any longer.
Differential revision: https://reviews.llvm.org/D66811
llvm-svn: 370090
pexpect gives as raw data going to a terminal. This means that if the
completed line does not fit the emulated line, the returned data will
contain line breaks. On my machine these line breaks happened to be
inside the "iohandler/completion" string that the test was searching
for.
Work around this by telling pexpect to emulate a very wide terminal.
llvm-svn: 370054
Otherwise dotest doesn't run the test and just lets it always pass.
Also update the comment to explain that we do directory and not
file completion.
llvm-svn: 370047
On the command line we usually insert a space after a completion to indicate that
the completion was successful. After the completion API refactoring, this also
happens with directories which essentially breaks file path completion (as
adding a space terminates the path and starts a new arg). This patch restores the old
behavior by again allowing partial completions. Also extends the iohandler
and SB API tests as the implementation for this is different in Editline
and SB API.
llvm-svn: 370043
Today I discovered the skipLongRunningTest decorator and to my surprise
all the tests were passing without the decorator. They don't seem to be
that expensive either, they take a few seconds but we have tests that
take much longer than that. As such I propose to remove the decorator
and enable them by default.
Differential revision: https://reviews.llvm.org/D66774
llvm-svn: 369995
We have started to see the no_binary version of this test
fail. The reason is that the binary was being removed
before the spawn actually launched the inferior. Add a
simple filesystem based synchronization to avoid this race.
llvm-svn: 369930
With this patch dotest.py will print the full invocation whenever it
fails to parse its arguments. The dotest invocation is usually build up
with different inputs, potentially coming from CMake, lldb-dotest, lit
or passed directly. This can make debugging hard, especially on CI,
where there might be another layer of indirection. This aims to make
that a bit easier.
llvm-svn: 369922
It looks like running without this argument was supported
for legacy reasons, but a Xcode 11 beta made the argument
mandatory for our usecase.
llvm-svn: 369709
the platform in the setUp/tearDown methods. I want to migrate the
re-instatement of the correct plaform to the setUp base method but
haven't had time to look at that yet, so I want to land this handful
of fixes until I get to it.
Differential revision: https://reviews.llvm.org/D66331
llvm-svn: 369484
We cannot override the DWARF version in the CFLAGS_EXTRA because they
are used by tests that explicitly build without debug info. Instead, we
pass them through the regular CFLAGS.
llvm-svn: 369477
Summary:
The test for conditional breakpoints on Windows was skipped because
there was no expression evaluation support at the time it was written.
After removing the annotation and testing it again, the test is passing.
http://lists.llvm.org/pipermail/lldb-dev/2019-August/015405.html
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Reviewers: stella.stamenova, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66499
llvm-svn: 369453
Summary:
This commit fixes some typo I found while exploring LLDB's codebase.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66452
llvm-svn: 369313
Summary:
This can help `lldb-vscode` handle launch commands associate with remote platform
attach request have field `attachCommands` to handle attach specific commands
add a corresponding one for launch request
if no launch command is provided, create a new target and launch; otherwise, execute the launch command
Differential Revision: https://reviews.llvm.org/D65363
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 369296
Instead of relying that three tabs show all completions, we should
show all remaining completions which will always stop the mode
where we show completions. Should fix this test on systems that
somehow have more completions that our normal LLDB (as they
would end up being stuck in the mode where we show completions).
llvm-svn: 369293
On the matrix bot on GreenDragon [1] we want to run the test suite
against different DWARF versions. The idea here is not to replace
targeted tests for certain DWARF features, but rather to provide an easy
way to support this configuration.
[1] http://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake-matrix/
Differential revision: https://reviews.llvm.org/D66370
llvm-svn: 369272
These tests are mostly trying to reach the different completion functions
in CommandCompletions.cpp (::ArchitectureNames, ::DiskFiles, ::Modules).
llvm-svn: 369249
There was a little bit of logic in the StopInfoBreakpoint::PerformAction
that would null out the StopInfo once we had a completed plan so that the
next call to GetStopInfo would replace it with the StopInfoThreadPlan.
But the stop-hooks check for whether a thread stopped for a reason didn't
trigger this conversion. So I added an API to do that directly, and then
called it where before we just reset the StopInfo.
<rdar://problem/54270767>
Differential Revision: https://reviews.llvm.org/D66241
llvm-svn: 369052
Summary:
Currently the heuristic used in ClangASTContext::CreateRecordType to identify an anonymous class is that there is that name is a nullptr or simply a null terminator. This heuristic is not accurate since it will also sweep up unnamed classes and lambdas. The improved heuristic relies on the requirement that an anonymous class must be contained within a class.
Differential Revision: https://reviews.llvm.org/D66175
llvm-svn: 368937
Summary:
It seems this was an unintended side-effect of D26698. AFAICT, these
functions did return an empty string before that patch, and the patch
contained code which attempted to ensure that, but those efforts were
negated by ConstString::AsCString, which by default returns a nullptr
even for empty strings.
This patch:
- fixes the GetOutput/Error methods to really return empty strings
- adds and explicit test for that
- removes a workaround in lldbtest.py, which was masking this problem
from our other tests
Reviewers: jingham, clayborg
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D65739
llvm-svn: 368806
Summary: Thanks to Hui Huang and reviewers for all the help with this patch!
Reviewers: labath, jfb, clayborg
Reviewed By: labath
Subscribers: Hui, clayborg, dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61687
llvm-svn: 368776
Summary: Thanks to Hui Huang and the reviewers for all the help with this patch.
Reviewers: labath, Hui, jfb, clayborg, amccarth
Reviewed By: labath
Subscribers: amccarth, compnerd, dexonsmith, mgorny, jfb, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63165
llvm-svn: 368759
We have no test coverage for the IOHandler code that is doing the
completion in the command line. This is adding a pexpect-based test
as a preparation for the switch to using CompletionRequest in the
whole completion machinery.
llvm-svn: 368679
Summary:
Our IR rewriting infrastructure currently fails when it encounters a variable which has no metadata associated.
This causes dynamic_cast to fail as in this case IRForTarget considers the type info pointers ('@_ZTI...') to be
variables without associated metadata. As there are no variables for these internal variables, this is actually
not an error and dynamic_cast would work fine if we didn't throw this error.
This patch fixes this by removing this diagnostics code. In case we would actually hit a variable that has no
metadata (but is supposed to have), we still have the error in the expression log so this shouldn't make it
harder to diagnose any missing metadata errors.
This patch should fix dynamic_cast and also adds a bunch of test coverage to that language feature.
Fixes rdar://10813639
Reviewers: davide, labath
Reviewed By: labath
Subscribers: friss, labath, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65932
llvm-svn: 368511
If a bitfield doesn't fit into the child_byte_size'd window at
child_byte_offset, move the window forward until it fits. The problem
here is that Value has no notion of bitfields and thus the Value's
DataExtractor is sized like the bitfields CompilerType; a sequence of
bitfields, however, can be larger than their underlying type.
This was not in the big-endian-derived DWARF 2 bitfield attributes
because their offsets were counted from the end of the window, so they
always fit.
rdar://problem/53132189
Differential Revision: https://reviews.llvm.org/D65492
llvm-svn: 368226
Summary:
The change https://reviews.llvm.org/D55575 modified ClangASTContext::CreateParameterDeclaration to call decl_ctx->addDecl(decl); this caused a regression since the existing code in DWARFASTParserClang::ParseChildParameters is called with the containing DeclContext. So when end up with cases where we are parsing a parameter for a member function and the parameter is added to the CXXRecordDecl as opposed to the CXXMethodDecl. This example is given in the regression test TestBreakpointInMemberFuncWNonPrimitiveParams.py which without this fix in a modules build leads to assert on setting a breakpoint in a member function with non primitive parameters. This scenario would be common when debugging LLDB or clang.
Differential Revision: https://reviews.llvm.org/D65414
llvm-svn: 367726
Summary: We have been seeing increased reports of performance issue around large project and formatting std::function variables especially in functions signatures in back traces. There are some possible fixes but exploring those fixes may take time and it is better to temporarily disable the formatter due to its impact and re-enable it once we have a fix.
Differential Revision: https://reviews.llvm.org/D65666
llvm-svn: 367701
For security reasons, DYLD_INSERT_LIBRARIES is not propagated to a child
process. This breaks the skipIfSanitized decorator, which checks for the
environment variable being set. Instead, always set the ASAN_OPTIONS and
make the decorator check for that.
Differential revision: https://reviews.llvm.org/D65594
llvm-svn: 367595
This test was frequently hanging on Windows, causing a timeout after
10 minutes. The short delay (100 microsecond) in the sample program
could cause a deadlock in the Windows thread pool, as I've explained
in the test program's comments.
Now that it doesn't hang, it passes reliably, so I've removed the
Windows-specific XFAIL.
I've tried to clarify the comments in TestThreadSpecificGBreakpoint.py
by eliminating some redundancy and typos, and I simplified away a
couple unnecessary assignments.
Differential Revision: https://reviews.llvm.org/D65546
llvm-svn: 367573
I was going through some of the old bugs and came across PR21069 which I
was able to reproduce. The issue is that we match the regex `^foo`
against the `DW_AT_name` in the DWARF, which for our anonymous function
is indeed `foo`. However, when we get the function name from the symbol
context, the result is `(anonymous namespace)::foo()`. This throws off
completions, which assumes that it's appending to whatever is already
present on the input, resulting in a bogus
`b fooonymous\ namespace)::foo()`.
Bug report: https://llvm.org/PR21069
Differential revision: https://reviews.llvm.org/D65498
llvm-svn: 367455
Now that the Xcode project is removed, I want to focus on dotest as a
test framework, and remove its driver capabilities for which we already
rely on llvm's lit. Removing multiprocessing is the first step in that
direction.
Differential revision: https://reviews.llvm.org/D65311
llvm-svn: 367331
Summary:
Tab completing inside the multiline expression command can cause LLDB to crash. The easiest way
to do this is to go inside a frame with at least one local variable and then try to complete:
(lldb) expr
1. a[tab]
Reason for this was some mixup when we calculate the cursor position. Obviously we should calculate
the offset inside the string by doing 'end - start', but we are doing 'start - end' (which causes the offset to
become -1 which will lead to some out-of-bounds reading).
Fixes rdar://51754005
I don't see any way to test this as the *multiline* expression completion is completely untested at the moment
and I don't think we have any existing code for testing infrastructure for it.
Reviewers: shafik, davide, labath
Reviewed By: labath
Subscribers: abidh, lldb-commits, davide, clayborg, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64995
llvm-svn: 367308
Compare the directory paths returned by lldb-vscode against realpaths
rather than apparent paths. This matches lldb-vscode behavior
and therefore fixes test failures when one of the parent directories
of the source tree is a symlink.
Differential Revision: https://reviews.llvm.org/D65432
llvm-svn: 367291
The test was not previously run due to decorator bug (fixed in r366903).
It is not a regression and is probably related to the other failing
test, so just disable it.
llvm-svn: 367285
Summary:
This doubles the 3 tests running right now on linux by also executing each test with libraries-svr4 enabled.
Not sure if there's a better way to do this as I had to copy/paste all the decorators as well...
Reviewers: labath, clayborg, xiaobai
Reviewed By: labath
Subscribers: srhines, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65129
llvm-svn: 367247
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
We noticed that TestInferiorCrashing.py and TestRecursiveInferior.py are
the second and third slowest tests in the test suite. Splitting them up
allows lit to schedule them more effectively.
llvm-svn: 367077
Dotest contains code to clear DYLD_LIBRARY_PATH for the inferior to not
propagate sanitized builds. However, it's possible that we want to
inject a different library path with `--inferior-env`. To make that work
correctly, we need to do that *after* clearing DYLD_LIBRARY_PATH.
llvm-svn: 367054
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
Summary:
Due to a logic error, lldb-server ended up asserting/crashing every time
the debugged process attempted an execve(). This fixes the error, and
extends TestExec to work on other platforms too. The "extension"
consists of avoiding non-standard posix_spawn extensions and using the
classic execve() call, which should be available on any platform that
actually supports re-execing. I change the test decorator from
@skipUnlessDarwin to @skipIfWindows.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65207
llvm-svn: 366985
Summary: update some test decorates that can actually pass on andriod aarch64
Patch by Wanyi Ye <kusmour@gmail.com>
Differential Revision: https://reviews.llvm.org/D64767
llvm-svn: 366858
On slower machines the vscode testcases were sometimes hanging:
1910 ? Sl 0:00 | \_ /usr/bin/python .../llvm/tools/lldb/test/dotest.py ... -p TestVSCode_setBreakpoints.py
2649 ? Sl 0:00 | \_ .../build/bin/lldb-vscode
2690 ? S 0:00 | \_ .../build/bin/lldb-server gdbserver --fd=9 --native-regs --setsid
2708 ? t 0:00 | \_ .../build/lldb-test-build.noindex/tools/lldb-vscode/breakpoint/TestVSCode_setBreakpoints.test_functionality/a.out
A reproducer of the racy bug for send_recv():
# self.send_packet(command)
#+ import time
#+ time.sleep(1)
# done = False
I guess `request_continue` was probably originally intended to be synchronous
but then it isn't and this code has been leftover there.
Differential revision: https://reviews.llvm.org/D65163
llvm-svn: 366850
Summary:
Delete the duplicate func `skipIfTargetAndroid`
Fix the old one. It didn't work for missing an argument `bugnumber`, this somehow made the decorator failed
Differential Revision: https://reviews.llvm.org/D64583
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 366771
Summary:
We assume in LLDB that every type comes from an ASTContext with an associated ClangASTContext.
However the types inside the ClangModuleDeclVendor don't have a ClangASTContext so we end up
crashing whenever we create a CompilerType for one of these types.
Simplest way to trigger this bug is to just look up NSObject from a module:
(lldb) expr @import Foundation
(lldb) type lookup NSObject
Assertion failed: (m_type_system != nullptr), function CompilerType, file /Users/teemperor/llvm1/llvm-project/lldb/source/Symbol/CompilerType.cpp, line 39.
This patch just creates a ClangASTContext for the ASTContext used by ClangModuleDeclVendor.
Reviewers: davide, shafik
Reviewed By: davide
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64989
llvm-svn: 366653
Summary: lldb-mi has been removed, but there are still a bunch of references in the code base. This patch removes all of them.
Reviewers: JDevlieghere, jfb
Reviewed By: JDevlieghere
Subscribers: dexonsmith, ki.stfu, mgorny, abidh, jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64992
llvm-svn: 366590
Summary:
Add __kernel_rt_sigreturn to the list of trap handlers for Linux (it's
used as such on aarch64 at least), and __restore_rt as well (used on
x86_64).
Skip decrement-and-recompute for trap handlers in
InitializeNonZerothFrame, as signal dispatch may point the child frame's
return address to the start of the return trampoline.
Parse the 'S' flag for signal handlers from eh_frame augmentation, and
propagate it to the unwind plan.
Reviewers: labath, jankratochvil, compnerd, jfb, jasonmolenda
Reviewed By: jasonmolenda
Subscribers: clayborg, MaskRay, wuzish, nemanjai, kbarton, jrtc27, atanasyan, jsji, javed.absar, kristof.beyls, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63667
llvm-svn: 366580
When two .c files define a type of the same name, lldb
just picks one and uses it regardless of context. That is
not correct. When stopped in a frame in one of the .c files
that define this type, it should use that local definition.
This commit just adds a test that checks for the correct
behavior. It is currently xfailed.
llvm-svn: 366507
Summary:
We currently don't support offsetof in the expression evaluator as it is implemented as a macro
(which then calls __builtin_offsetof) in stddef.h. The best solution would be to include that
header (or even better, import Clang's builtin module), but header-parsing and
(cross-platform) importing modules is not ready yet.
Until we get this working with modules I would say we add the macro to our existing macro list
as we already do with other macros from stddef.h/stdint.h. We should be able to drop all of them
once we can import the relevant modules by default.
rdar://26040641
Reviewers: shafik, davide
Reviewed By: davide
Subscribers: clayborg, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64917
llvm-svn: 366476
If a core file has an EFI version string which includes a UUID
(similar to what it returns for the kdp KDP_KERNELVERSION packet)
in the LC_IDENT or LC_NOTE 'kern ver str' load command. In that
case, we should try to find the binary and dSYM for the UUID
listed. The dSYM may have python code which knows how to relocate
the binary to the correct address in lldb's target section load
list and loads other ancillary binaries.
The test case is a little involved,
1. it compiles an inferior hello world apple (a.out),
2. it compiles a program which can create a corefile manually
with a specific binary's UUID encoded in it,
3. it gets the UUID of the a.out binary,
4. it creates a shell script, dsym-for-uuid.sh, which will
return the full path to the a.out + a.out.dSYM when called
with teh correct UUID,
5. it sets the LLDB_APPLE_DSYMFORUUID_EXECUTABLE env var before
creating the lldb target, to point to this dsym-for-uuid.sh,
6. runs the create-corefile binary we compiled in step #2,
7. loads the corefile from step #6 into lldb,
8. verifies that lldb loaded a.out by reading the LC_NOTE
load command from the corefile, calling dsym-for-uuid.sh with
that UUID, got back the path to a.out and loaded it.
whew!
<rdar://problem/47562911>
llvm-svn: 366378
In ClangASTContext::CreateFunctionTemplateSpecializationInfo a TemplateArgumentList is allocated on the stack but is treated as if it is persistent in subsequent calls. When we exit the function func_decl will still point to the stack allocated memory. We will use TemplateArgumentList::CreateCopy instead which will allocate memory out of the DeclContext.
Differential Revision: https://reviews.llvm.org/D64777
llvm-svn: 366365
Disable colors so we don't risk having unexpected ANSI codes in the test
output. Currently, the behavior of a test can change depending on
whether it's run under a color-supporting terminal, or under a dummy
terminal, for example when using lit or multiprocessing.
llvm-svn: 366356
Summary:
With LLDB we use localUncachedLookup(), however, that fails to find
Decls when a transparent context is involved and the given DC has
external lexical storage. The solution is to use noload_lookup, which
works well with transparent contexts. But, we cannot use only the
noload_lookup since the slow case of localUncachedLookup is still needed
in some other cases.
These other cases are handled in ASTImporterLookupTable, but we cannot
use that with LLDB since that traverses through the AST which initiates
the load of external decls again via DC::decls().
We must avoid loading external decls during the import becuase
ExternalASTSource is implemented with ASTImporter, so external loads
during import results in uncontrolled and faulty import.
Reviewers: shafik, teemperor, jingham, clayborg, a_sidorin, a.sidorin
Subscribers: rnkovacs, dkrupp, Szelethus, gamesh411, cfe-commits, lldb-commits
Tags: #clang, #lldb
Differential Revision: https://reviews.llvm.org/D61333
llvm-svn: 366325
Summary:
It seems that calling Popen can return to the caller before the started process has read all the needed information
from its executable. This means that in case we delete the executable while the process is still starting up,
this test will create a zombie process which in turn leads to a failing test. On my macOS system this happens quite frequently.
This patch fixes this by letting the test synchronize with the inferior after it has started up.
Reviewers: davide
Reviewed By: davide
Subscribers: labath, friss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64546
llvm-svn: 365813
It seems on Windows we don't handle the lldb_expr_result variable correctly:
```
AssertionError: False is not True : 'expr $__lldb_expr_result' returns expected result, got '(int &) $0 = 0x0000000000000000'
```
I'll disable the test until I can find a way to debug this on Windows.
llvm-svn: 365719
Summary:
Fixed `Android.rules` for running test suite on remote android
- the build configuration is not compatible with ndk structure, change it to link to static libc++
- generally clang should be able to use libc++ and will link against the right library, but some libc++ installations require the user manually link libc++abi.
- add flag `-lc++abi` to fix the test binary build failure
Added `skipIfTargetAndroid` `skipUnlessTargetAndroid` for better test support
- the `skipIfPlatform` method will ask `lldbplatformutil.getPlatform()` for platform info which is actually the os type, and //Android// is not os type but environment
- create this function to handle the android target condition
**To Run Test on Remote Android**
1 start lldb-server on your devices
2 run lldb-dotest with following configuration:
`./lldb-dotest --out-of-tree-debugserver --arch aarch64 --platform-name remote-android --platform-url connect://localhost:12345 --platform-working-dir /data/local/tmp/ --compiler your/ndk/clang`
Reviewers: xiaobai, labath
Reviewed By: labath
Subscribers: labath, javed.absar, kristof.beyls, srhines, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64118
llvm-svn: 365561
This test was originally marked as expected failure on Windows, but it is timing out instead of outright failing now. The expectedFailure attribute does not correctly track timeouts (as in, they don't count as failures), so now this is causing the test suite to fail.
llvm-svn: 365527
It looks like when this test was added, it was based on TestHelloWorld and it ended up with the same class name. This is an issue because the logs associated with the tests use the class name as the identifier for the file and if two tests have the same name their logs overwrite each other. On non-windows, this just means we lose one of the logs, but on Windows this means that one of the tests will fail occasionally because the file are locked by the other test.
llvm-svn: 364860
It looks like when this test was added, it was based on TestBreakAfterJoin and it ended up with the same class name. This is an issue because the logs associated with the tests use the class name as the identifier for the file and if two tests have the same name their logs overwrite each other. On non-windows, this just means we lose one of the logs, but on Windows this means that one of the tests will fail occasionally because the file are locked by the other test.
llvm-svn: 364826
Set global enable bits (i.e. bits 1, 3, 5, 7) to enable watchpoints
on NetBSD rather than the local enable bits (0, 2, 4, 6). The former
are necessary for watchpoints to be correctly recognized by the NetBSD
kernel. The latter cause them to be reported as trace points.
Differential Revision: https://reviews.llvm.org/D63792
llvm-svn: 364781
D62502, together with D62503 have broken the builds which have XML
support enabled. Reverting D62503 (r364355) fixed that, but has broken
has left some of the tests introduced by D62502 broken more or less
nondeternimistically (it depended on whether the system happens to place
the library list near unreadable pages of memory). I attempted to make a
partial fix for this in r364748, but Jan Kratochvil pointed out that
this reintroduces the problem which reverting D62503 was trying to
solve.
So instead, I back out the whole thing so we can get back to a clean
slate that works for everyone. We can figure out a way forward from
there.
This reverts r364748, r363772 and r363707.
llvm-svn: 364751
on a thread. When talking to some older gdb-remote stubs, We were getting
a stop reason from the stop reply packet and setting it on the relevant
thread before we updated the full stop list. That would get discarded when
the full list was updated.
Also, if you already have a thread list when you go to see if there is an
Operating System plugin, and you do indeed load a new OS plugin, you have to
re-fetch the thread list or it will only show the raw threads.
Differential Revision: https://reviews.llvm.org/D62887
llvm-svn: 364666
The qemu x86_64 target returns a target.xml register definition file which
includes other xml files and they include others, etc. Also, the registers
are not put in register groups like lldb wants to see.
This patch (1) puts registers that aren't in a register group in a "general"
register group, (2) change ProcessGDBRemote::GetGDBServerRegisterInfo to
be a method that starts the parsing, asking a recurisve function to fetch
and parse target.xml, (3) adds
ProcessGDBRemote::GetGDBServerRegisterInfoXMLAndProcess which can recusively
call itself to read and parse included xml files, (4) in addition to expecting
the top-level <target> element (which only happens in the top level xml file),
also an xml file that consists of a <feature> node - read the register
defintions and includes from that <feature> element.
<rdar://problem/49537922>
Differential revision: https://reviews.llvm.org/D63802
llvm-svn: 364484
This patch adds a dotest flag for setting environment variables for the
inferior. This is different from the current --env flag, which sets
variables in the debugger's environment. This allows us to set things
like LD_LIBRARY_PATH for testing.
Differential revision: https://reviews.llvm.org/D63790
llvm-svn: 364443
Summary:
Implement the ABI for WIndows-x86_64 including register info and calling convention.
Handled nested struct returned in register (SysV doesn't have it supported)
Reviewers: xiaobai, compnerd
Reviewed By: compnerd
Subscribers: labath, jasonmolenda, fedor.sergeev, mgorny, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62213
llvm-svn: 364216
on some systems this test fails because the two methods it uses to
cross-reference the data don't match in the case of the vdso module. The
"read from /proc/%pid/maps" method returns "[vdso]", while the method
which reads it from the linker rendezvous structures returns
"linux-vdso.so.1". Neither of the two names match any actual file.
This restricts the test to only consider the libraries that we ourselves
have added to the test, minimizing the impact of system dependencies
that we cannot control.
llvm-svn: 363772
Summary:
This is the fourth patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Implement the `xfer:libraries-svr4` packet by adding a new function that generates the list and then in Handle_xfer I generate the XML for it. The XML is really simple so I'm just using string concatenation because I believe it's more readable than having to deal with a DOM api.
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: emaste, mgorny, srhines, krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62502
llvm-svn: 363707
Now that we correctly ignore ASCII escape sequences when colors are
disabled (r362240), I'd like to change the default frame and thread
format to include color in their output, in line with the syntax
highlighting that Raphael added a while ago.
This patch adds highlighting for the stop reason, the file, line and
column number. With colors disabled, this of course is a no-op.
Differential revision: https://reviews.llvm.org/D62743
llvm-svn: 363608
D55859 <https://reviews.llvm.org/D55859> has no effect for some of the
testcases so this patch extends it even for (all?) other testcases known to me.
LLDB was failing when LLDB prints errors reading system debug infos
(`*-debuginfo.rpm`, DWZ-optimized) which should never happen as LLDB testcases
should not be affected by system debug infos.
`lldb/packages/Python/lldbsuite/test/api/multithreaded/driver.cpp.template` is
using only SB API which does not expose `ModuleList` so I had to call
`HandleCommand()` there.
`lldb-test.cpp` could also use `HandleCommand` and then there would be no need
for `ModuleListProperties::SetEnableExternalLookup()` but I think it is cleaner
with API and not on based on text commands.
Differential Revision: https://reviews.llvm.org/D63339
llvm-svn: 363567
Skip watchpoint tests if security.models.extensions.user_set_dbregs
is disabled. This indicates that unprivileged processes are not allowed
to write to debug registers which is a prerequisite for using hardware
watchpoints.
Differential Revision: https://reviews.llvm.org/D63380
llvm-svn: 363536
Summary:
PersistentStateExpressions (e.g. ClangPersistentVariables) have the
ability to define types using expressions that persist throughout the
debugging session. GetCompilerTypeFromPersistentDecl is a useful
operation to have if you need to use any of those persistently declared types,
like in CommandObjectMemory.
This decouples clang from CommandObjectMemory and decouples Plugins from
Commands in general.
Differential Revision: https://reviews.llvm.org/D62797
llvm-svn: 363183
Add a function to flatten the nested aggregate type
Differential Revision: https://reviews.llvm.org/D62702
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 362543
This fixes an unintended regression introduced by
https://reviews.llvm.org/D61451 by making sure the Objective-C runtime
is also tried when the "correct" language runtime failed to return an
object description.
rdar://problem/50791055
Differential Revision: https://reviews.llvm.org/D62015
llvm-svn: 360929
Summary:
I don't think there's a good reason for this behavior to be considered
ObjC-specific. We can generalize this.
Differential Revision: https://reviews.llvm.org/D61776
llvm-svn: 360741
Replace checked-in minidumps with their yaml forms now that yaml2obj
supports the ThreadList stream. I delete the test_modules_in_mini_dump
test altogether as this functionality is covered more systematically in
TestMinidumpUUID.py.
llvm-svn: 360655
logging when the testsuite is run with trace mode enabled are leaving
the logging enabled after the tests have finished. That state
isn't cleared in a --no-multiprocess testsuite run.
llvm-svn: 360480
This can cause us to return paths to files on the local filesystem even
if we don't end up using that file (for instance because the file is not
a real module).
llvm-svn: 360432
While this fixed the windows bot failures, it also broke all other bots.
Upon closer inspection, it turns out that the windows bots were "broken"
because two tests were unexpectedly passing -- i.e., the original patch
(r360375) actually improved our stepping support on windows.
So instead, I remove the relevant XFAILs.
This reverts commit r360397.
llvm-svn: 360407
Currently when we single step over a source line, we run and stop at every branch in the source line range. We can reduce the number of times we stop when stepping over by figuring out if any of these branches are function calls, and if so, ignore these branches. Since we are stepping over we can safely ignore these calls since they will return to the next instruction. Currently the step logic would stop at those branches (1st stop), single step into the branch (2nd stop), and then set a breakpoint at the return address (3rd stop), and then continue.
Differential Revision: https://reviews.llvm.org/D58678
llvm-svn: 360375
The test is failing sometimes because the debugger is failing to attach for lack of permissions. The fix is to call lldb_enable_attach inside the inferior main function
llvm-svn: 360371
This particular test fails once every so many runs on GreenDragon. Given
that the randomness in the inferior isn't critical to the test, I
removed it in the hopes that it is the cause of the flakiness.
llvm-svn: 359992
Ran clang-format on the added test file and use the new StringRef
comparison over the temporary ConstStrings. Also aligned the
end of one of the code string literals.
llvm-svn: 359931
This patch makes `re` an alias for `register`. Currently `re<TAB>` gives
you the choice between `register` and `reproducer`. Given that you use
`register` a lot more often, it should win for the common substring.
Differential revision: https://reviews.llvm.org/D61469
llvm-svn: 359927
Summary:
In an Objective-C context a local variable and namespace can cause an ambiguous name lookup when used in an expression. The solution involves mimicking the existing C++ solution which is to add local using declarations for local variables. This causes a different type of lookup to be used which eliminates the namespace during acceptable results filtering.
Differential Revision: https://reviews.llvm.org/D59960
llvm-svn: 359921
The part which checks whether vla_expr shows up in the variable list
does not pass on non-darwin platforms. Add the appropriate decorator.
llvm-svn: 359867
by respecting the "artificial" attribute on variables. Function
arguments that are artificial and useful to end-users are being
whitelisted by the language runtime.
<rdar://problem/45322477>
Differential Revision: https://reviews.llvm.org/D61451
llvm-svn: 359841
Two tests cannot share the same name, because they will generate an
identical trace file. When that happens, this can lead to a race
condition where dotest fails when trying to move both files into the
trace directory, because the file has already been moved. Additionally,
the trace will have been overwritten by the test that finishes last.
llvm-svn: 359807
Summary:
In r259902, LLDB started injecting all the locals in every expression
evaluation. This fixed a bunch of issues, but also caused others, mostly
performance regressions on some codebases. The regressions were bad
enough that we added a setting in r274783 to control the behavior and
we have been shipping with the setting off to avoid the perf regressions.
This patch changes the logic injecting the local variables to only inject
the ones present in the expression typed by the user. The approach is
fairly simple and just scans the typed expression for every local name.
Hopefully this gives us the best of both world as it just realizes the
types of the variables really used by the expression.
Landing this requires the 2 other issues I pointed out today to be addressed
but I wanted to gather comments right away.
Original patch by Frédéric Riss!
Reviewers: jingham, clayborg, friss, shafik
Reviewed By: jingham, clayborg
Subscribers: teemperor, labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D46551
llvm-svn: 359773
This test is flaky on GreenDragon. Since it was a pexpect test and
straightforward enough to convert, I went ahead and converted it to a
lit test.
Differential revision: https://reviews.llvm.org/D61414
llvm-svn: 359751
Summary:
This will fix a bug where during expression parsing we are not setting a CXXRecordDecl to not be passed in registers and the resulting code generation is wrong.
The DWARF attribute DW_CC_pass_by_reference tells us that we should not be passing in registers i.e. RAA_Indirect.
This change depends this clang change which fixes the fact that the ASTImporter does not copy RecordDeclBits for CXXRecordDecl: https://reviews.llvm.org/D61140
Differential Revision: https://reviews.llvm.org/D61146
llvm-svn: 359732
After multiple attempts from both Fred and Adrian, this variant of the
test is still flaky on GreenDragon. This commit disables it while we
continue investigate.
llvm-svn: 359724
Summary:
This patch is a follow-up for D58125. It implements the manual instantiation and merging of 'std' templates like
`std::vector` and `std::shared_ptr` with information from the debug info AST. This (finally) allows using these classes
in the expression evaluator like every other class (i.e. things like `vec.size()` and shared_ptr debugging now works, yay!).
The main logic is the `CxxModuleHandler` which intercept the ASTImporter import process and replaces any `std` decls
by decls from the C++ module. The decls from the C++ module are "imported" by just deserializing them directly in
the expression evaluation context. This is mostly because we don't want to rely on the ASTImporter to correctly import
these declarations, but in the future we should also move to the ASTImporter for that.
This patch doesn't contain the automatic desugaring for result variables. This means that if you call for example
`size` of `std::vector` you maybe get some very verbose typedef'd type as the variable type, e.g.
`std::vector<int, std::allocator<int>>::value_type`.
This is not only unreadable, it also means that our ASTImporter has to import all these types and associated
decls into the persisent variable context. This currently usually leads to some assertion getting triggered
in Clang when the ASTImporter either makes a mistake during importing or our debug info AST is inconsitent.
The current workaround I use in the tests is to just cast the result to it's actual type (e.g. `size_t` or `int`) to prevent
the ASTImporter from having to handle all these complicated decls.
The automatic desugaring will be a future patch because I'm not happy yet with the current code for that and because
I anticipate that this will be a controversial patch.
Reviewers: aprantl, shafik, jingham, martong, serge-sans-paille
Reviewed By: martong
Subscribers: balazske, rnkovacs, mgorny, mgrang, abidh, jdoerfert, lldb-commits
Tags: #c_modules_in_lldb, #lldb
Differential Revision: https://reviews.llvm.org/D59537
llvm-svn: 359538
Summary:
Dump more information about "access violation" and "in page error" exceptions to
description. Description now contains data about read/write violation type and
actual address as described at
https://docs.microsoft.com/en-us/windows/desktop/api/winnt/ns-winnt-_exception_record
Reviewers: asmith, stella.stamenova
Reviewed By: stella.stamenova
Subscribers: teemperor, amccarth, abidh, lldb-commits, aleksandr.urakov
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60519
llvm-svn: 359420
Summary:
When we encounter a templated function in the debug information, we
were creating an AST that looked like this:
FunctionTemplateDecl 0x12980ab90 <<invalid sloc>> <invalid sloc> foo<int>
|-TemplateTypeParmDecl 0x12980aad0 <<invalid sloc>> <invalid sloc> class depth 0 index 0 T
|-FunctionDecl 0x12980aa30 <<invalid sloc>> <invalid sloc> foo<int> 'int (int)' extern
| |-TemplateArgument type 'int'
| `-ParmVarDecl 0x12980a998 <<invalid sloc>> <invalid sloc> t1 'int'
`-FunctionDecl 0x12980aa30 <<invalid sloc>> <invalid sloc> foo<int> 'int (int)' extern
|-TemplateArgument type 'int'
`-ParmVarDecl 0x12980a998 <<invalid sloc>> <invalid sloc> t1 'int'
Note that the FunctionTemplateDecl has 2 children which are identical (as
in have the same address). This is not what Clang is doing:
FunctionTemplateDecl 0x7f89d206c6f8 </tmp/template.cpp:1:1, line:4:1> line:2:5 foo
|-TemplateTypeParmDecl 0x7f89d206c4a8 <line:1:10, col:19> col:19 referenced typename depth 0 index 0 T
|-FunctionDecl 0x7f89d206c660 <line:2:1, line:4:1> line:2:5 foo 'int (T)'
| `-ParmVarDecl 0x7f89d206c570 <col:9, col:11> col:11 t1 'T'
`-FunctionDecl 0x7f89d206cb60 <line:2:1, line:4:1> line:2:5 used foo 'int (int)'
|-TemplateArgument type 'int'
`-ParmVarDecl 0x7f89d206ca68 <col:9, col:11> col:11 t1 'int':'int'
The 2 chidlren are different and actually repesent different things: the first
one is the unspecialized version and the second one is specialized. (Just looking
at the names shows another major difference which is that we create the parent
with a name of "foo<int>" when it should be just "foo".)
The fact that we have those 2 identical children confuses the ClangImporter
and generates an infinite recursion (reported in https://llvm.org/pr41473).
We cannot create the unspecialized version as the debug information doesn't
contain a mapping from the template parameters to their use in the prototype.
This patch just creates 2 different FunctionDecls for those 2 children of the
FunctionTemplateDecl. This avoids the infinite recursion and allows us to
call functions. As the XFAILs in the added test show, we've still got issues
in our handling of templates. I believe they are mostly centered on the fact
that we create do not register "foo" as a template, but "foo<int>". This is
a bigger change that will need changes to the debug information generation.
I believe this change makes sense on its own.
Reviewers: shafik, clayborg, jingham
Subscribers: aprantl, javed.absar, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D61044
llvm-svn: 359140
Summary:
This previous fix 5469bda296 did not have a test since we did not have a reproducer.
This is related to how formatters deal with pointers and references. The added tests both the new behavior and covers the previous bug fix as well.
Differential Revision: https://reviews.llvm.org/D60588
llvm-svn: 359118
Summary:
Instead of checking in raw minidump binaries, check in their yaml form,
and call yaml2obj in the test.
Reviewers: clayborg
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D60948
llvm-svn: 358957
Summary:
The test was failing occasionally (1% of runs or so), because of
unpredictable timings between the two threads spawned by the test. If
the second thread hit the breakpoint right as we were stepping out of
the function on the first thread, we would still be stuck at the inner
frame when the process stopped.
This would cause errors like:
File "/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm/tools/lldb/packages/Python/lldbsuite/test/tools/lldb-vscode/step/TestVSCode_step.py", line 67, in test_step
self.assertEqual(x1, x3, 'verify step out variable')
AssertionError: 2 != 1 : verify step out variable
AFAICT, lldb-vscode is doing the right thing here, and the problem is
that the test is not taking this sequence of events into account. Since
the test is about testing stepping, it does not seem necessary to have
threads in the inferior at all, so I just rewrite the test to execute
the code we're supposed to step through directly on the main thread.
Reviewers: clayborg, jgorbe
Subscribers: jfb, lldb-commits
Differential Revision: https://reviews.llvm.org/D60608
llvm-svn: 358847
As I was waiting for the test suite to complete at 99% I noticed this
test taking quite a bit of time. Since it's easy to split I just went
ahead and did so.
llvm-svn: 358792
D59433 and D60501 changed the way UUIDs are computed from minidump
files. This was done to synchronize the U(G)UID representation with the
native tools of given platforms, but it created a mismatch between
minidumps and breakpad files.
This updates the breakpad algorithm to match the one found in minidumps,
and also adds a couple of tests which should fail if these two ever get
out of sync. Incidentally, this means that the module id in the breakpad
files is almost identical to our notion of UUIDs, so the computation
algorithm can be somewhat simplified.
llvm-svn: 358500
Summary:
https://reviews.llvm.org/D51633 added error handling in the ASTImporter.cpp which uncovered an underlying bug in which we used the wrong name when handling naming conflicts. This could cause a segmentation fault when attempting to cast an int to an enum during expression parsing.
This test should pass once https://reviews.llvm.org/D59665 is committed.
Differential Revision: https://reviews.llvm.org/D59667
llvm-svn: 358462
This test contained an incredibly complicated inferior, but in reality,
all it was testing was that we can backtrace up to main and see main's
arguments.
However, the way this was implemented (setting a breakpoint on a
separate thread) meant that each time the test would run, it would stop
in a different location on the main thread. Most of the time this
location would be deep in some libc function, which meant that the
success of this test depended on our ability to backtrace out of a
random function of the c library that the user happens to have
installed.
This makes the test unpredictable. Backtracing out of a libc function is
an important functionality, but this is not the way to test it. Often it
is not even our fault that we cannot backtrace out because the C library
contains a lot of assembly routines that may not have correct unwind
info associated with them.
For this reason the test has accumulated numerous @expectedFail/Flaky
decorators. In this patch, I replace the inferior with one that does not
depend on libc functions. Instead I create a couple of stack frames of
user code, and have the test verify that. I also simplify the test by
using lldbutil.run_to_source_breakpoint.
llvm-svn: 358266
This converts the CommandScriptImmediateOutput test from a python test
using pexpect to a lit test.
Differential revision: https://reviews.llvm.org/D60566
llvm-svn: 358180
Summary:
D59433 added code to swap bytes UUIDs coming from minidump files, but
only enabled it for apple platforms. Based on my research, I believe
this is the correct thing to do for windows as well, as the natural way
of printing U(G)UIDs on this platforms is to print the first three
components as (4 or 2)-byte integers printed in natural (big-endian)
order. This makes the UUID string coming out of lldb match the strings
produced by other windows tools.
The decision to byte-swap the age field is somewhat arbitrary, because
the age field is usually printed separately from the file GUID (and
often in decimal). However, for our purposes (telling whether two files
are identical), including it in the UUID is correct, and printing it in
big-endian makes it easier to recognize the age value.
This also makes the UUIDs generated here (almost) match up with the
UUIDs computed for breakpad symbol files
(BreakpadRecords.cpp:parseModuleId), which already implemented the
byte-swapping. The "almost" is here because ObjectFileBreakpad does not
swap the age field, but I'll fix that in a follow-up.
There is no UUID support in ObjectFileCOFF at the moment, but ideally
the algorithms used here and in ObjectFileCOFF should be in sync so that
object file matching works correctly.
Reviewers: clayborg, amccarth, markmentovai, asmith
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D60501
llvm-svn: 358169
TestObjCMethods2.py was the third-longest running test on Darwin. By
splitting it up, lit can exploit parallelism to reduce the total wall
clock time.
llvm-svn: 358088
Add a flag to control whether the ModulesDidLoad notification is
called when a module is added. If the notifications are disabled,
the caller must call ModulesDidLoad after adding all the new modules,
but postponing this notification until they're all batched up can
allow for better efficiency than notifying one-by-one.
Change the name of the ModuleList notifier functions that a subclass
can implement to start with 'Notify' to make it clear what they are.
Add a NotifyModulesRemoved.
Add header documentation for the changed/updated methods.
Added defaulted-value 'notify' argument to ModuleList Append,
AppendIfNeeded, and Remove because callers working with a local
ModuleList don't have an obvious idea of what notify means in this
context. When the ModuleList is a part of the Target class, the
notify behavior matters.
DynamicLoaderDarwin has been updated so that libraries being
added/removed are correctly batched up before notifications are
sent. Added the TestModuleLoadedNotifys.py test to run on
Darwin to test this.
<rdar://problem/48293064>
Differential Revision: https://reviews.llvm.org/D60172
llvm-svn: 357955
The testcase for objective-c data formatters is very big as it checks a
bunch of stuff. This is annoying when using the lit test driver, because
it prevents us from running the different cases in parallel. As a
result, it's always one of the last few tests that complete. This patch
splits the test into multiple files that share a common base class. This
way lit can run the different tests in parallel.
Differential revision: https://reviews.llvm.org/D60300
llvm-svn: 357786
When this test fails (flakes) all we get is an error message like "False
is not True". This replaces patterns like assertTrue(a == b) with
assertEqual(a, b), so we get a better error message (and hopefully a
hint as to why the test is flaky).
llvm-svn: 357747
Summary:
This patch moves the modify-python-lldb code for adding new functions to
the SBModule class into the SBModule interface file. As this is the last
class using this functionality, I also remove all support for this kind
of modifications from modify-python-lldb.py.
Reviewers: amccarth, clayborg, jingham
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D60195
llvm-svn: 357680
Summary:
After https://reviews.llvm.org/D59828 and https://reviews.llvm.org/D59849,
I believe the problems with these tests hanging have been solved.
I tried enabling all of them on my machine, and got two failures:
- One of them was spawning a child process that lives for 5 seconds, waited
for 5 seconds to attach to the child, and failed because the child wasn't
there.
- The other one was a legit failure because shell expansion of arguments doesn't
work on Linux.
This tests enables all lldb-vscode tests on Linux except for "launch process
with shell expansion of args" (which doesn't work), and fixes the other broken
test by reducing the time it waits before attaching to its child process.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60153
llvm-svn: 357633
Allow partial UUID matching in Minidump core file plug-in
Breakpad had bugs in earlier versions where it would take a 20 byte ELF build ID and put it into the minidump file as a 16 byte PDB70 UUID with an age of zero. This would make it impossible to do postmortem debugging with one of these older minidump files.
This fix allows partial matching of UUIDs. To do this we first try and match with the full UUID value, and then fall back to removing the original directory path from the module specification and we remove the UUID requirement, and then manually do the matching ourselves. This allows scripts to find symbols files using a symbol server, place them all in a directory, use the "setting set target.exec-search-paths" setting to specify the directory, and then load the core file. The Target::GetSharedModule() can then find the correct file without doing any other matching and load it.
Tests were added to cover a partial UUID match where the breakpad file has a 16 byte UUID and the actual file on disk has a 20 byte UUID, both where the first 16 bytes match, and don't match.
Differential Revision: https://reviews.llvm.org/D60001
llvm-svn: 357603
Summary:
Instead of modifying the swig-generated code, just add the appropriate
methods to the interface files in order to get the swig to do the
generation for us.
This is a straight-forward move from the python script to the interface
files. The single class which has nontrivial handling in the script
(SBModule) has been left for a separate patch.
For the cases where I did not find any tests exercising the
iteration/length methods (i.e., no tests failed after I stopped emitting
them), I tried to add basic tests for that functionality.
Reviewers: zturner, jingham, amccarth
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D60119
llvm-svn: 357572
See discussion in https://reviews.llvm.org/D60001.
Revert Clean up windows build bot.
This reverts r357504 (git commit 380c2420ec)
Revert Fix buildbot where paths were not matching up.
This reverts r357491 (git commit 5050586860)
Revert Allow partial UUID matching in Minidump core file plug-in
This reverts r357482 (git commit 838bba9c34)
llvm-svn: 357534
Breakpad had bugs in earlier versions where it would take a 20 byte ELF build ID and put it into the minidump file as a 16 byte PDB70 UUID with an age of zero. This would make it impossible to do postmortem debugging with one of these older minidump files.
This fix allows partial matching of UUIDs. To do this we first try and match with the full UUID value, and then fall back to removing the original directory path from the module specification and we remove the UUID requirement, and then manually do the matching ourselves. This allows scripts to find symbols files using a symbol server, place them all in a directory, use the "setting set target.exec-search-paths" setting to specify the directory, and then load the core file. The Target::GetSharedModule() can then find the correct file without doing any other matching and load it.
Tests were added to cover a partial UUID match where the breakpad file has a 16 byte UUID and the actual file on disk has a 20 byte UUID, both where the first 16 bytes match, and don't match.
Differential Revision: https://reviews.llvm.org/D60001
llvm-svn: 357482
I'm not sure why this surfaced at this particular point, but
TestCommandScriptImmediateOutput (a pexpect test) had a synchronization
issue, where the (lldb) promts it was expecting were getting out of
sync. This happened for two reasons:
- it did not expect the initial (lldb) prompt we print at startup
- launchArgs() returned None, which resulted in an extra "target create
None" command being issued to lldb (and an extra unhandled prompt
being printed).
Resolving these two issues seems to fix (or at least, improve) the test.
llvm-svn: 357459
The test was hitting llvm_unreachable in
Platform::GetSoftwareBreakpointTrapOpcode because it could not figure
out the architecture of the process. Since that is not the purpose of
the test, I change the test to use an explicit
CreateTargetWithFileAndTargetTriple command to specify it.
llvm-svn: 357456
While reviewing D56233 it became clear to me that this test can be
simplified. There's no need for a start-stop cycle in the inferior -- we
can start fiddling with its registers as soon as it is launched.
llvm-svn: 357451
Summary:
This change prevents the lldb-vscode test harness from hanging up waiting for
new messages when the lldb-vscode subprocess crashes.
Now, when an EOF from the subprocess pipe is detected we enqueue a `None` packet
in the received packets list. Then, during the message processing loop, we can
use this `None` packet to tell apart the case where lldb-vscode has terminated
unexpectedly from the normal situation where no pending messages means blocking
and waiting for more data.
I believe this should be enough to fix the issues with these tests hanging on
multiple platforms. Once this lands, I'll prepare and test a separate change
removing the @skipIfLinux annotations.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D59849
llvm-svn: 357426
Summary:
In case of a breakpoint site overlapping with the destination address,
the WriteMemory method reported an incorrect memory size.
Instead of returning the right amount of bytes written, it falls through
the scope and returned 0.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Reviewers: jasonmolenda, friss, jingham
Subscribers: JDevlieghere, davide, lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60022
llvm-svn: 357420
Include support for NetBSD core dumps from evbarm/aarch64 system,
and matching test cases for them.
Based on earlier work by Kamil Rytarowski.
Differential Revision: https://reviews.llvm.org/D60034
llvm-svn: 357399
It was making a list of a certain size but not always filling in that
many elements, which would lead to a crash iterating over the list.
Differential Revision: https://reviews.llvm.org/D59913
llvm-svn: 357207
The changes were reverted due to ubsan errors (unaligned accesses). Here
I fix those errors by first copying the data into aligned storage.
Besides fixing alignment issues, this also fixes reading of minidump
strings on big-endian systems.
llvm-svn: 356896
